88953 Astroflame Prod Cat 2018

Raven Door Sealing Systems are available to combat draughts, dust, rain, noise,
heat loss, heat gain, fire, smoke and stray light. The following is a selection of the
Raven Smoke Rated Seals available from the comprehensive range shown on www.
astrodraft.com. All seals are only available in an anodised satin clear finish.
L = Light Duty seals include those typically used in residential applications or light
traffic areas. M = Medium Duty seals are used in commercial applications such as
office spaces, shops, commercial accommodation or medium traffic areas.
H = Heavy Duty seals are designed for areas with a high level of use such as public
hospitals, airports, factories, shopping centres or areas with a large through flow
of pedestrian and wheeled traffic.
PERIMETER SMOKE SEAL RP24SI
> Product Description
An adjustable door stop seal for noise, light
and smoke. The RP24 seal uses independently
adjustable fasteners to achieve up to 8mm
sealing adjustment for maximum noise control.
The seal can be butt jointed at the corners
to produce an easily installed continuous seal
around the door frame. Its aluminium carrier is
sturdy and slotted for adjustment with concealed
fixings. It is quick and easy to install around
the jamb and head and can be fitted without
removing the door. It is tamper proof with fully
DOOR BOTTOM SMOKE SEAL RP8SI
> Product Description
A hot smoke automatic door bottom seal,
with an extruded silicon sealing component,
that conforms to the 200 degrees Celsius
requirement of BCA c3.4.RP8Si is spring
loaded to lift clear of the floor as soon as
the door leaf is opened by a few millimetres.
Mounted into a 15mm x 34mm groove that has
been morticed into the bottom edge of the
door, it is operated automatically by pressure
against the door jamb on its adjusting screw.
concealed fasteners to give the seal an aesthetic
appearance. The closed cell S.E. Sponge E.P.D.M.
seal requires only normal door closing force. If
fixing to rebated frames of single doors, specify a
long backset door latch. RP24 has been granted
an Australian Design Award. It is an effective
acoustic seal when tested in accordance with
BS2750, it meets smoke leakage requirements
of BS5588 Pt 1 when tested in accordance
with BS476 pT31.1 and has been fire tested in
accordance with BS476 Pt22 for half an hour.
PERIMETER SMOKE SEAL RP78SI
> Product Description
A medium temperature smoke door frame
seal that has been tested to AS 1530.4,
AS/NZS 1905. 1 and conforms to BCA spec.
C3.4. 200°C Medium temperature smoke.
Equivalent to BS 476 part 20 and 22. It is
an acoustically designed smoke seal for
FOR ADDITIONAL RAVEN SEALS
PLEASE VIEW OUR WEBSITE
OR GO TO THE DRAFT PROOFING
SECTION OF THIS CATALOGUE.
installation on door stops and it can be mitred
or butt jointed. Its aluminium carrier is sturdy
and slotted for adjustment with concealed
fixings. It is quick and easy to install around
the jamb and head and can be fitted without
removing the door.
RP8Si has been tested for durability
1,000,000 cycles completed without failure.
Location: Single and double, butt hinged doors.
Min/Max Gap: 3mm/13mm.
Seal Lengths: 380mm, 600mm, 820mm,
915mm, 1070mm, 1220mm (max). Seal cut
back to exact size. Standard Finish:
Anodised Satin Clear or Bronze (poa).
Noise - Acoustic
Ambient (Cold) Smoke
Temperature up to 70°C
Medium Temperature Smoke
Temperature of 200°C for 30 minutes
(smoke doors)
Fire & Hot Smoke
Fully developed fires exceeding 600 o C and hot
smoke beyond 200 o C (Intumescent Fire Seals)
H
M
Insects and Vermin
Weather
Energy, Draughts & Dust
Fire (approved)
Access & Mobility
Light
Up to BAL - FZ (Flame zone)
Antimicrobial
H
20
> How to order this product
Online: www.astroflame.com phone: 0800 023 2482 or email sales@astroflame.com