JDS 2019 catalog19

2019 Components Catalog Sandcarving Materials & Supplies J
Ikonics Imaging ® Sandcarving Supplies
LaserTape
Apply. Laser. Blast. LaserTape allows you to use a laser engraving machine in
correlation with a sandcarve cabinet. LaserTape creates low cost stencils while
allowing you to achieve the finished look of sandcarve engraving.
made in the
USA
C
J
LaserTape (4 mil)
Part No.
Description
LT4X100ROLL 4" x 100' Roll
LT6X100ROLL 6" x 100' Roll
LT10X100ROLL 10" x 100' Roll
LT12X100ROLL 12" x 100' Roll
LTSAMPLE 4" x 6" Sample - Limit 1 per customer
LaserTape Sandcarving Film
• No PVC
• Conforms smoothly to surfaces without wrinkling
• Fast and simple clean up
• Quick burn
• Easy to colorfill after sandcarving
Alumninum Oxide Abrasive
An excellent abrasive for etching glass, stone, wood and other solid surface
materials. Aluminum oxide is an economical abrasive with good cutting ability
and is used prevalently in the industry. It is reusable and provides a fine finish.
Sandcarving Materials & Supplies
Alumninum Oxide Abrasive
Part No. Description
2BLAST2 Aluminum Oxide 180 Grit - 50 lb. container
2BLAST3 Aluminum Oxide 220 Grit - 50 lb. container
Abrasives are DROP SHIP ONLY, FOB: MN. See Price List for details.
Silicon Carbide Abrasive
An excellent abrasive for etching glass, stone, wood and other solid surface
materials. Silicon carbide is a more effective abrasive as a new cutting edge is
revealed each time it breaks down into smaller particles. It creates no static,
leaving your blasted object and sandblast cabinet window free of abrasive media.
Silicon Carbide Abrasive
Part No. Description
2BLAST7 Silicon Carbide 180 Grit - 50 lb. container
2BLAST8 Silicon Carbide 220 Grit - 50 lb. container
Abrasives are DROP SHIP ONLY, FOB: MN. See Price List for details.
Where Your Business Is Always Appreciated 378