JDS 2019 catalog19

JDS Sandcarving Industries, Materials Inc. & Supplies
JDS Industries, Inc.
Ikonics Imaging ® Sandcarving Supplies
JDS Industries, Inc.
Letralite ® Exposure Unit
The Letralite Exposure Unit is designed to provide exceptional imaging results on all
IKONICS Imaging photoresist films. The unit’s unique compact cylindrical design makes it
simple to operate and assures consistent results when used properly. Refer to individual
photoresist user guides for specific processing information.
Use this unit under safe or yellow light conditions.
PBEXPUNIT
Letralite ® Exposure Unit
made in the
USA
Letralite ® Exposure Unit Specifications
Image Area: 11" x 14"
Unit Dimensions: 18" L x 3" W x 7" H
Weight:
8 lbs.
Electrical:
110 volt, 60 cycle
Also available in 220 volt 50 cycle
Replacement Parts: Exposure pad
Light bulb
Exposure cylinder
C
Sandcarving Materials & Supplies
TriggerJet Washout Nozzle
The TriggerJet Washout Nozzle provides a unique, low-cost opportunity for photoresist
film users to effectively develop their images after UV exposure. This hand spray-gun
delivers a stream of washout power equal to that of more expensive nozzles. The trigger
lock allows a continuous flow of water for convenient operation. You can simulate the
equivalent of approximately 150 psi with this unit of polypropylene built for long lasting
operation. With gentle side-to-side sweeping motions, the photoresist film products can be
developed to yield satisfying image washout for all low to medium volume requirements.
PBSPRAYNOZZLE
Case Qty: 1
TriggerJet Features
• Low cost
• Adjustable spray nozzle
• Attaches easily to a common garden hose
TriggerJet Specifications
Maximum pressure: 150 psi (10bar)
Maximum water temperature: 140º F (60º C)
Nozzle: Molded polypropylene (fan spray)
Capacity: .9 gpm (3.4 liters/min.)
Length: 9.5 inches (24.1 centimeters)
Weight: 6 oz. (170 grams)
Wire Wheel
The wire wheel is used to perforate the membrane on washout photo resist
films after the mask has been applied. It helps to remove any trapped air in
between the membrane and substrate.
PBWIREWHEEL
Case Qty: 1
379 Your Recognition & Personalization Partner