JDS 2019 catalog19

JDS Engraving Industries, Materials Inc. & Supplies
Seklema - Hold Down Mat
JDS Industries, Inc.
SEKLEMA is a 2-sided self healing material designed to hold materials on your
engraving table without the use of table tapes or jigs. SEKLEMA works with both
metal and plastic engraving stock as well as many other materials designed for
engraving. SEKLEMA is re-usable, non-stick material that can be easily cleaned
with only a soft sponge and water.
JDS Industries, Inc.
C
Holds Material on
Engraving Table with
No Adhesive!
Part No. Description Case Qty.
MAT1E 12" x 12" SEKLEMA Mat 1
MAT1Q 12" x 24" SEKLEMA Mat 1
MAT1H 24" x 24" SEKLEMA Mat 1
MAT1 24" x 48" SEKLEMA Mat 1
Engraving Materials & Supplies
How long will Multi-Mat/Seklema Last?
The life span of Multi-Mat/Seklema depends on many
factors including type of use( IE: engraving, profiling through
material, or laser hold down), proper cleaning and handling.
The average user can expect many months or even years of
use. Since Multi-Mat/Seklema is double sided, its life span is
doubled when compared to other single sided products.
What is the cleaning procedure for Multi-Mat/Seklema?
Cleaning Multi-Mat/Seklema is simple and easy. Merely use
a soft sponge and running water to remove chips, dust or
dirt, and then allow to dry.
How is Multi-Mat/Seklema affixed to the engraving table, and can it
be removed?
Because Multi-Mat/Seklema is double sided, it holds itself
to the engraving table top. No double stick tapes, vacuums,
or clamps are necessary; Multi-Mat/Seklema can be easily
removed and stored, then reinstalled by placing it in position
and gently pressing down.
Is there any clean up required after using Multi-Mat/Seklema?
For most situations the answer is no, however Multi-Mat/
Seklema does leave a slight oily residue on some engraving
plates. This residue can be easily removed with cloth and
rubbing alcohol, or the double stick tape can be applied to
the plate before engraving, and then used with Multi-Mat/
Seklema.
What happens if I cut through the engraving material into Multi-Mat/
Seklema, is it ruined ?
Multi-Mat/Seklema has a self healing feature. Small cuts
in the surface of Multi-Mat/Seklema should not cause
problems, and seem to heal themselves. Of course,
continued cuts over a long period of time will degrade the
effectiveness of Multi-Mat/Seklema. Many small enclosed
cuts (closed path such as a series of circles, or squares)
could cause sections of the mat to come out which would
degrade its performance.
Multi-Mat/Seklema seems expensive, how can I justify paying that
much?
Although Multi-Mat/Seklema will wear out eventually, it is
not really a consumable item like double stick hold down
tape or labor. Multi-Mat/Seklema makes life a lot easier for
the engraver, and will pay for itself very quickly in time saved
and ease of use. When the cost of double stick hold down
tape, along with the associated time and labor needed for
application and removal is figured in, Multi-Mat/Seklema
becomes very cost effective.
657
Your Recognition & Personalization Partner