Special tools for customer applications 2019
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Gearshift <strong>for</strong>k<br />
Gang milling cutter (monoblock) / Teeth = 10 / Teeth eff. = 5<br />
Inserts interchangeable among each other,<br />
thus both cutting edges of the inserts can be used<br />
All inserts adjustable (dim. 5 mm)<br />
µm<br />
HSK 63-A<br />
Ø 27<br />
5 ±0.05 adjustable<br />
75 adjustable<br />
Requirements<br />
Very unstable component, requires low cutting <strong>for</strong>ces of the tool<br />
Machining of the two ring surfaces in one cut<br />
Solution<br />
Gang milling cutter (monoblock) / Teeth = 10 / Teeth eff. = 5<br />
Inserts interchangeable among each other thus both cutting edges of the inserts can be used<br />
All inserts adjustable (dim. 5 mm)<br />
Cutting data<br />
Material (DIN) C35-520 N/mm²<br />
Cutting grade<br />
carbide coated<br />
Cutting speed m/min 120<br />
Feed rate per tooth mm 0.1<br />
Cutting depth mm both sides 0.6<br />
Result<br />
Short machining time<br />
Inserts usable on both sides<br />
Customer benefits<br />
Low costs per component<br />
80