Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WELDING CHEMICALS<br />
Vaporiser<br />
400 ml 750WAPO05L<br />
„T”-bar Type Vaporiser Pump<br />
1.5 liter 750WAPO15L<br />
SUPERWELD<br />
SILICONE-FREE WELDING PROTECTION PASTE.<br />
- Prevents sticking of welding spatter on gas nozzles and contact<br />
tips.<br />
- Increases the torch service life considerably.<br />
- Long lasting and high efficiency product.<br />
- Silicone-solvent free, odorless and non-flammable.<br />
350 gr 750SWPASTE<br />
EXACLEAN-1<br />
DEGREASER - CLEANER<br />
SPRAY<br />
EXAP<strong>EN</strong>-2<br />
RED P<strong>EN</strong>ETRATING SPRAY<br />
EXATEST-3<br />
WHITE CRACK TESTER RE-<br />
AG<strong>EN</strong>T SPRAY<br />
- EXACLEAN-1 cleans of grease,<br />
oil and other pollutions from the<br />
surface to have directs access<br />
to the smallest crack and welding<br />
or material disorders.<br />
- EXAP<strong>EN</strong>-2 should be used richly<br />
on the cleaned surface and left<br />
there for 5-10 minutes leaving<br />
enough time for the penetration.<br />
- Remove the excess EXAP<strong>EN</strong>-2<br />
from the surface with water<br />
or by the use of cleaner like<br />
EXACLEAN-1.<br />
- Spray evenly from about 20 cm<br />
the EXATEST-3 for the surface<br />
you would like to test for cracks.<br />
For perfect evaluation wait 5-10<br />
minutes again to have all the<br />
cracks visible in full depth.<br />
- If it is necessarily clean again the<br />
surface with EXACLEAN-1 after<br />
the test procedure.<br />
500 ml 750EXACLN1<br />
500 ml 750EXAP<strong>EN</strong>2<br />
500 ml 750EXATEST3<br />
57
Change language