Parts Alliance Garage Essentials Winter 2020

Sykes
TRANSIT FRONT BEARING
REMOVER KIT
• For the safe removal of the front wheel bearing assembly (GEN 3)
and separation of the disc from the bearing assembly (GEN 3)
without damage to either unit; enabling them to be reused if required
• This tool is for work on both rear wheel and front wheel drive
• The kit uses five rods rather than three, making it a
stronger tool for stubborn bearings
• No need to remove the drive shaft
Kit Contents
• Top Plate
• Bottom Plate
• Impact Screw
• Hub Assembly Alignment Pin
• 5 x Long Rods
• 5 x Short Rods
Applications
• Ford Transit Custom 2012 onwards
• Ford Transit 2013 onwards
PART NUMBER: 08758000
ONLY
£
265
VENOM INDUCTION HEATER
DELUXE KIT
Generates “Invisible Heat ® ” to release corroded and thread locked
metal components without the danger of an open flame
1 KILOWATT INPUT - 1 KILOWATT OUTPUT
Features include:
• Angled Design with Trigger
• Coil Twist Lock
• LED Usage Indicator
• Fault Override Delay
• Fan Operation Enhancements
• User Controlled LED Switch
Applications include:
• ABS Sensors
• Exhaust System
• Heat Treating
• Truck Bed Bolts
• Body Panel Dents
• Break Bleeder Nuts
• Tie Rod / Ball Joint Ends
• Suspension Components
• Steering Components
• U-Bolts
• Inline Connectors
• Metal Fabrication
• O2 / DPF Sensors
ONLY
£
685
PART NUMBER: 53400300
NEW
The Deluxe kit includes a removable tray with eleven labelled coils; including nine interchangeable
pre-formed coils to heat fasteners up to 1 1/2” in diameter and are a variety of lengths from 4” – 10” long,
the flexible Bearing Buddy for wrapping around inline and asymmetrical objects and the straight heat
resistant U-Form coil for DIY winding
HGV SPLIT BRUSH KIT
MASTER
For the removal and installation of split / spring eye bushes on HGV vehicles
• Uses a unique clamping system and a series of shells for a range of bush sizes
from 56mm Dia to 75mm Dia
• When used with a hydraulic pump (20017000) the kit allows the operator to work
in a limited access environment and so reduce the amount of disassembly
work required
Applications
• Shell 1 (75mm) - Mercedes Benz
• Shell 2 (70mm) - MAN
• Shell 3 (68mm) - MAN Front Spring
• Shell 4 (66mm) - IVECO Eurostar
• Shell 5 (65mm) - Mercedes Benz, Actros, Atego
• Shell 6 (63mm) - DAF
• Shell 7 (60mm) - Mercedes Benz, Actros, Atego
• Shell 8 (58mm) - Mercedes Benz / Volvo
• Shell 9 (56mm) - IVECO Eurostar
PART NUMBER: 18797000
ONLY
£
779
CARBON TECH
HHO
MADE IN
THE UK
HGV HUB
PULLER KIT
NEW
• Promotes efficient engine operation with
a cleaner engine
• Hydrogen runs into the combustion
engine’s air inlet system whilst running
• Portable machine - enables use away
from the normal garage environment
• Low Voltage Operation - works off the
vehicle’s battery when the engine is
running
• Ease to use - no or little disassembly of
the engine required
• Low maintenance - made in the UK
• Fixed HHO Supply
• Two year warranty
Contains 5 x thread adaptor pairs:
• M18 x P1.5 X 65mm/L
• M20 x P1.5 X 65mm/L
• M22 x P1.5 X 65mm/L
• 7/8” - 11 BSF
• 7/8” - 14 UNF
SUITABLE FOR USE WITH AIR TOOLS
Universal wheel HUB extractor
• Variable for pitch circle diameter up to 445mm
• To suit whell stud sizes commonly found on DAF, MAN,
MERC, RENAULT, SCANIA & VOLVO models
PART NUMBER: 53400300 PART NUMBER: 21027500
ONLY
£
3,495
CAN HELP TO REDUCE EMISSION
LEVELS TO CONFORM WITH THE
LATEST MOT REGULATIONS
ONLY
£
479
Garage Essentials - For the best Choice, Quality, Service & Expertise
61