WaterTec Catalog 2020-Web

“I have never seen such a fine wetting pattern
under such conditions. In the past we would
have had to feed the tape from each side
into the swale in an attempt to improve the
wetting pattern. This would be expensive
and labor-intensive to provide bi-directional
water application to a single zone.”
Jim Klauzer | Ontario, OR
ADVANTAGE
2
MORE UNIFORM OUTPUT FOR ANY TERRAIN
FLOWCONTROL ®
Toro FlowControl puts you in control of watering decisions.
You control how much water your plants receive by
increasing or decreasing the operating pressure —
without sacrificing uniformity.
Low System Pressure
High System Pressure
RESULT: More uniform delivery of water and fertilizer
to the roots of your plants with the flexibility to control
application rates.
FLOWCONTROL WALL THICKNESS
Diameter
Wall
Thickness
Operating Pressure Reel Length Reel Weight
psi
bar
min max † min max †
ft meters lbs kg
5 mil 4 10 0.3 1.7 13,000 3,962 72 33
Emitter Flow vs Pressure
6 mil 4 16 0.3 1.1 10,000 3,048 64 29
5/8”
(16mm)
0.635”
8 mil 4 16 0.3 1.1 7,500 2,286 66 30
10 mil 4 25 0.3 1.7 6,000 1,829 63 29
12 mil 4 25 0.3 1.7 5,100 1,554 63 29
15 mil 4 25 0.3 1.7 4,000 1,219 63 29
6 mil 4 10 0.3 0.7 7,380 2,250 68 31
7/8”
(22mm)
0.880”
8 mil 4 15 0.3 1.0 6,000 1,829 72 33
10 mil 4 20 0.3 1.4 4,400 1,341 71 32
12 mil 4 20 0.3 1.4 4,000 1,219 72 33
15 mil 4 22 0.3 1.5 3,000 914 66 30
1 3/8”
(35mm)
1.380”
15 mil 4 18 0.3 1.3 2,700 823 87 39
KEY
PART NUMBER: EAFC 5 06 08 67 - 1000
EAFC = FlowControl drip tape
5 = Diameter (inch)
06 = Mil Thickness
08 = Emitter Spacing (inch)
67 = Flow Rate (gph/100)
1000 = Reel Length (feet/10)
* X denotes the diameter. 5 for 5/8”, 7 for 7/8” and 11 for 1-3/8”
** xx denotes mil thickness.
1-3/8” only available in 15 mil.
Metric outlet spacing expressed in nominal length.
Coefficient of Variation (Cv) Less than 3%.
†
Maximum pressure within laterals while operating or
flushing
www.watertecna.com
71