2020 Components Catalog

2020 Components Catalog Special Services
Artwork Requirements:
Artwork is PREFERRED in the following PC formats:
CorelDraw (.cdr) or Adobe Illustrator (saved as .eps
or .pdf file format).
All digital artwork should be supplied as line art (vector
art). For color artwork please specify the exact PMS colors
used. All type must be converted to outlines (curves). Hard
copy artwork should be as large as possible within an
8.5" x 11" for scanning purposes. Digital images should be
vector artwork (not bitmapped/raster) and saved in either
CorelDraw or Adobe Illustrator as an EPS (encapsulated
PostScript) file WITHOUT COMPRESSION.
DO NOT send raster images that are embedded within
another file, such as within Microsoft Word, PowerPoint,
Publisher, etc.
All artwork created on a Macintosh should be saved
in a PC format with type converted to outlines.
Images that contain halftones, tints, grayscales or are
intended for process color separation should have a bitmap
resolution of at least 300 pixels-per-inch and supplied
at finished size or larger. All artwork files should also be
emailed in a PDF format for reference.
Word documents, faxes, photocopies, business cards &
letterhead are NOT considered acceptable artwork and
CANNOT BE USED FOR ARTWORK.
JPEGs, GIFFs, TIFFs and all other bitmap files
(not vector based) can be submitted for use at a resolution
of NO LESS than 300 pixels-per-inch and supplied at
finished size or larger.
What if I don’t have artwork
or my artwork is not acceptable?
Layout of copy and art will be at JDS Industries’ discretion
unless specifications are clearly marked on the order or
finished art is supplied. Finished products are only as good
as the artwork supplied. Please make sure your artwork is
acceptable before submission. JDS Graphics Staff can help
you with your artwork for a charge of $60 per hour.
What if I need a PMS Match?
Due to inherent technical differences in color monitors,
the colors depicted in the electronic proof may not exactly
match those in the final product. Please specify required
PMS colors. We make every effort to match requested
colors, but cannot guarantee a 100% exact match. Colors
are matched as close as possible to the requested color
but may vary slightly. For this reason an exact PMS match
cannot be guaranteed.
Fabrication Services:
Phone: 855.537.2228
Email: art@jdsindustries.com
Fax Number: 605.271.9155
Mailing Address:
JDS Industries
Attn: Fabrication
1800 E 57th St N
Sioux Falls, SD 57104
CNC ROUTING
for pricing log on to shop.jdsindustries.com
10