2020 Components Catalog

2020 Components Catalog Sign Supplies
HOW
TO BUILD A
CUT VINYL
PART NUMBER
The first four (4) digits
in our part number identify
the series of product.
(These four digit numbers can be
located at the top of the info charts
within each series. They may not always
be the same as the series number. Refer
to the chart for each series to ensure you
have the correct number.)
The second four (4) digits
identify the material converted size.
The first two digits indicate the width
and the last two digits indicate the length.
Note: For 1 yard material
use 01 in the last two digits to indicate
the length.
Note: See chart below for
width and length codes.
4200 - 1515 - 014
Unpunched
2.8 mil Calendered
Width = 15"
When ordering punched product
refer to the notes for each series to
identify the correct number to order.
These will be the first (4) digits of your
part number for punched product.
Length = 150' (50 yds)
(The 0 in 150 is hidden)
Color 014 (Tomato Red)
4250 - 3003 - 003
Sign Supplies
The final three (3) digits
identify the color, and all
colors contain three digits.
Notes:
Standard punch is slot pattern.
IBM and 3-hole punch patterns
are available. Except for 3M
Reflective Series which is
Gerber punched.
Punched
2.8 mil Calendered
1 yard example
Width = 30"
Length = 30' (10 yds)
(The 0 in 30 is hidden)
Color 003 (Gloss Black)
2100 - 2401 - 001
Unpunched
2.0 mil Cast
Width = 24"
Length = 3' (1 yard)
(cut vinyl only)
Color 001 (Red)
Width and Length
Part number codes for the second four (4) digits
Width 1 yard 5 yard* 10 yard 25 yard** 50 yard
15" 1501 1502 1503 1508 1515
24" 2401 2402 2403 2408 2415
30" 3001 3002 3003 3008 3015
48" 4801 4802 4803 4808 4815
* Heat Transfer Only
** Select Materials
• Prices subject to change by manufacturer •
for pricing log on to shop.jdsindustries.com 550