2020 Components Catalog

Engraving Materials & Supplies
JDS Industries, Inc.
Corner Shaper & Dies
Can be used on metal and plastic engraving stock.
Case Qty: 1
made in the
USA
C
CS500
Corner Shaper Platform.
(Dies sold separately)
Specifications
Dimensions: 9½" L x 6" W x 4½" H
Weight:
4 lbs.
Material: Aluminum
Max. Stock
Thickness: Brass - 0.030"
Aluminum - 0.045"
Steel - 0.015"
Plastic - 0.063"
Die Shapes and Sizes
Radius Dies Notch Dies Decorative Dies Scallop Dies Slot Punch Hole Punch
DR18
1/8" Radius
DN18
1/8" Notch
SP20
Slot is 1/8" x 9/16"
HP20
Hole diameter is 3/32"
DR316
3/16" Radius
HP20A
Hole diameter is 1/8"
DR14
1/4" Radius
DN14
1/4" Notch
DSC14
1/4" Scallop
DR38
3/8" Radius
DN38
3/8" Notch
DD38
3/8" Decorative
DSC38
3/8" Scallop
DR12
1/2" Radius
DD12
1/2" Decorative
Engraving Materials & Supplies
Plastic 12" Shear/Metal 12" Shear
12" Table Shear available for either plastic or metal. Blades are specifically designed to
cut metal only or plastic only.
Case Qty: 1
Specifications
Dimensions:
Weight:
Material:
S1200M
Metal Shear
(for Metal Only)
S1200P
Plastic Shear
(for Plastic Only)
25" L x 14" W x 11" H
32.4 lbs.
Aluminum
Max. Stock
Width: 12"
Metal Blade
Cutting Capacity: Brass up to .025"
Aluminum up to .050"
Steel up to .025"
Plastic Blade
Cutting Capacity: Flexible Plastic up to .063"
Replacement Blade Sets:
BLADEM
Metal cutting blade
BLADEP
Plastic cutting blade
made in the
USA
S1200SCALE
12" Replacement
Scale/Ruler
Switching between plastic & metal blades on shear is not recommended due to the time it takes to change & re-square blades.
Cutter Resharpening Service (allow 2-3 weeks)
For standard cutters, burnishers and profiler tools. JDS cannot resharpen diamond tools.
Send tools to: JDS Industries, 1800 E 57th St N., Sioux Falls, SD 57104
C
727
Your Recognition, Personalization & Sign Supply Partner