Brantz Rally Product Overview - 2020
The Brantz brand of rally equipment offers the complete range of motorsport Tripmeters and Retrotrips for everyone from novice rally enthusiasts all the way to professional team rallying.
The Brantz brand of rally equipment offers the complete range of motorsport Tripmeters and Retrotrips for everyone from novice rally enthusiasts all the way to professional team rallying.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MECHANICAL SENSORS
Brantz Standard Wheel Sensor
BR2A
This 12mm diameter Wheel Sensor can be mounted on almost any car in a variety of different locations
and set ups. The most common set up is mounted to pick up the metal bolt heads on your brake disc as
they pass by. A minimum of 4 bolts are required, however 6 is recommended. Steel is the optimum
target and being at least 20% larger than the face of the sensor, this is also true for the size of a hole
being used to trigger the sensor.
Alternative positioning:
• Mounted to pick up on flying tabs (minimum of 2 positioned 180° apart) fastened on the bolts of
the Prop Shaft's Universal Joint.
• Mounted to pick up off an ABS ring
• Mounted through the back plate of Drum Brakes to pick up off the 4 hub studs
• Mounted to detect an absence of steel, for example drilled holes in a rotating disc.
Brantz High Temperature Wheel Sensor
BR2A-HT
The BR2A-HT is a 12mm device that works in exactly the same way as the Standard Wheel Sensor
version, however, it is specially designed for High Temperature situations such as extremely hot climates
or courses with increased levels of braking. The Operating Temperature is rated up to 120°C.
www.brantz.co.uk 16