Brantz Rally Product Overview - 2020
The Brantz brand of rally equipment offers the complete range of motorsport Tripmeters and Retrotrips for everyone from novice rally enthusiasts all the way to professional team rallying.
The Brantz brand of rally equipment offers the complete range of motorsport Tripmeters and Retrotrips for everyone from novice rally enthusiasts all the way to professional team rallying.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Brantz Rally Products Overview
2020
www.brantz.co.uk 1
Contents
International Range of Tripmeters
International 1 Pro Tripmeter BR13 p03
International 2 Pro Tripmeter BR6 p04
International 2-DD Pro + Driver Display Unit BR6-DD + BR61 p05
International 2S Pro Tripmeter BR7 p06
International 2S-DD Pro + Driver Display Unit BR7-DD + BR71 p07
International 3 Pro Tripmeter BR8 p08
International 3-DD Pro + Driver Display Unit BR8-DD + BR81 p09
International GNSS Bundles
p10
Laser 3 BR34 p11
Retrotrip Range of Tripmeters
Retrotrip 2 Classique BR9C p12
Retrotrip 2 Mulsanne BR9M p12
Retrotrip 3 Classique BR10C p13
Retrotrip Driver Display BR91 p14
Retrotrip Back-Tracker BR59 p15
Sensors & Interfaces
Mechanical Sensors
p16
Electronic Speedo Sensors
p25
Satellite Sensors BRGPS p25
CANBUS Interfaces
p26
Clocks & Timers
Timer V2 BR32V2 p28
Timer Driver Display & Accessories
p29
WP Timer WPT001/WPT001-E p30
Accessories
Power Conditioner for 6V Vehicles BR21 p31
Plug Kit for Internationals & Retrotrips BR43 p31
Dual Sensor Switch BR49 p31
Fuse Kit BRFUSE p31
RAM Mounts
p32
Fokkens Window Mounts
p33
Remotes
p34
Sun Screen/Night Filters
p35
12V AUX Plug BR12VAUX p36
Ground Sheet BRTARP p36
Electronic Average Speed Table BR19 p37
Stopwatch & Clock BR42 p38
Sensor Accessories
Pulse Doubler BR52 p39
Pulse Reducer for Wheel Sensors BR5-2A p39
Sensor Extension Kit BR2X p39
How to Select a Sensor..........................................................................................
Price List................................................................................................................
p40
p42
www.brantz.co.uk 2
International 1 Pro
BR13
The International 1 Pro is our basic single readout tripmeter; ideal for road rallying and club level stage
events.
Single Display (Red LEDs ~ 15mm high)
Calibrated easily via push-wheel switches on the front of the unit.
999.9 Maximum Distance (with adjustable decimal point: 00.00 or 000.0)
Can be calibrated to read in Miles or Kilometres.
Zero, Forward and Reverse Buttons on the front face of the Meter.
Suitable for BOTH Negative and Positive earthed vehicles
Dimensions: 120 (140 inc mounting flanges) x 100 x 45mm
ESSENTIAL EXTRAS:
• BRANTZ Sensor
• In-Line Fuse Kit (BRFUSE)
OPTIONAL EXTRAS:
• NEW - International Window Mount (BRINT-RAM-W)
• Plug Kit (BR43)
• Dual Sensor Switch (BR49)
• Electronic Average Speedtable (BR19)
• Pulse Doubler (BR52)
• Sensor Extension Cable (BR2X)
• Timer V2 (BR32V2)
• Sun Screen Filter (BRSS7)
• Power Conditioner (BR21) – Essential for 6V Vehicles
www.brantz.co.uk 3
International 2 Pro
BR6
The International 2 Pro, and its predecessors, are one of the most popular rally tripmeters to have
served many a generation of rallying enthusiasts with their accuracy, ease of use and rugged
dependability. Allowed on all HERO events without penalties and the meter of choice for all HERO's
Arrive and Drive cars.
Dual Displays – showing Total Distance and Intermediate Distance (Red LEDs ~ 15mm high)
Calibrated easily via push-wheel switches on the front of the unit
999.9 Maximum Total Distance (with adjustable decimal point: 00.00 or 000.0)
99.99 Maximum Intermediate Distance
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometres
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob –
for manually increasing or decreasing the total distance travelled in case of corrections
Suitable for BOTH Negative and Positive earthed vehicles
Dimensions: 120 (140 inc mounting flanges) x 100 x 45mm
ESSENTIAL EXTRAS:
• BRANTZ Sensor
• In-Line Fuse Kit (BRFUSE)
OPTIONAL EXTRAS:
• International Driver Display (BR61) – International 2-DD Pro
(BR6-DD) Required
• Plug Kit (BR43)
• NEW - International Window Mount (BRINT-RAM-W)
• Dual Sensor Switch (BR49)
• Electronic Average Speedtable (BR19)
• Pulse Doubler (BR52)
• Sensor Extension Cable (BR2X)
• Timer V2 (BR32V2)
• Sun Screen/Night Filter (BRSS7)
• Power Conditioner (BR21) – Essential for 6V Vehicles
www.brantz.co.uk 4
International 2-DD Pro + Driver Display Unit
BR6DD + BR61
The International 2-DD Pro has been modified to allow the addition of a Driver Display Unit.
As with the standard International 2 Pro features include:
Dual Displays (Red LEDs ~ 15mm high)
• Total Distance
• Intermediate Distance
Calibrated easily via push-wheel switches on the front of the unit
999.9 Maximum Total Distance (with adjustable decimal point:
00.00 or 000.0)
99.99 Maximum Intermediate Distance
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometres
Suitable for BOTH Negative and Positive earthed vehicles
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob –
for manually increasing or decreasing the total distance travelled in case of corrections
Driver Display Mode selection button
Requires a Brantz Sensor & Fuse
This unit also has the facility for a detachable Driver Display Unit
– BR61 (sold separately):
The Driver Display will mirror one of the following from the main tripmeter:
• Total Distance
• Intermediate Distance
Dual Operated View Mode Selection Buttons – Driver or Co-Driver Operated
LED Display Mode Indicator
Display Dimming for Night Stages
Dimensions: 80 x 40 x 60mm
BR61: International Driver Display Unit
www.brantz.co.uk 5
International 2S Pro
The International 2S Pro tripmeter has all the features of the International 2 Pro PLUS a third readout
showing either Current Speed or Average Speed. The Average speed can be recalculated at any time,
even on the move.
Triple Displays – showing Total Distance, Intermediate Distance and Speed or Average Speed (Red
LEDs ~ 15mm high)
Calibrated easily via push-wheel switches on the front of the unit
999.9 Maximum Total Distance (with adjustable decimal point: 00.00 or 000.0)
99.99 Maximum Inter Distance
999 Maximum Vehicle Speed / 99.9 Maximum Average Speed Display
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometres
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob –
for manually increasing or decreasing the total distance travelled in case of corrections
Suitable for BOTH Negative and Positive earthed vehicles
Dimensions: 120 (140 inc mounting flanges) x 100 x 45mm
BR7
ESSENTIAL EXTRAS:
• BRANTZ Sensor
• In-Line Fuse Kit (BRFUSE)
OPTIONAL EXTRAS:
• International Driver Display (BR71) – International 2S-DD
Pro (BR7-DD) Required
• Plug Kit (BR43)
• NEW - International Window Mount (BRINT-RAM-W)
• Dual Sensor Switch (BR49)
• Pulse Doubler (BR52)
• Sensor Extension Cable (BR2X)
• Timer V2 (BR32V2)
• Sun Screen/Night Filter (BRSS7)
• Power Conditioner (BR21) – Essential for 6V Vehicles
www.brantz.co.uk 6
International 2S-DD Pro + Driver Display Unit
BR7DD + BR71
The International 2S-DD Pro has been modified to allow the addition of a Driver Display Unit.
As with the standard International 2S Pro features include:
Triple Display Unit showing: (Red LEDs ~ 15mm high)
• Total Distance • Current Speed OR Average Speed
• Intermediate Distance
Calibrated easily via push-wheel switches on the front of the unit.
999.9 Maximum Total Distance (with adjustable decimal point: 00.00
or 000.0)
99.99 Maximum Intermediate Distance
999 Maximum Current Speed or 99.9 Maximum Average Speed
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometres
Suitable for BOTH Negative and Positive earthed vehicles
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob –
for manually increasing or decreasing the total distance travelled in case of corrections
Driver Display Mode selection button
Requires a Brantz Sensor & Fuse
This unit also has the facility for a detachable Driver Display Unit
– BR71 (sold separately):
The Driver Display will mirror one of the following from the main tripmeter:
• Total Distance • Current Speed
• Intermediate Distance • Average Speed
Dual Operated View Mode Selection Buttons – Driver or Co-driver Operated
LED Display Mode Indicator
Dimming Switch for Night Stages
Dimensions: 80 x 40 x 60mm
BR71: International Driver Display Unit
www.brantz.co.uk 7
International 3 Pro
The International 3 Pro tripmeter has all the features of the International 2 Pro PLUS a third readout
showing Current Speed ONLY. This tripmeter does NOT show average speed so is allowed in many
Regularity Events in which electronic average speed calculators are prohibited.
Triple Displays – showing Total Distance, Intermediate Distance and Speed (Red LEDs ~ 15mm high)
Calibrated easily via push-wheel switches on the front of the unit
999.9 Maximum Total Distance (with adjustable decimal point: 00.00 or 000.0)
99.99 Maximum Inter Distance
999 Maximum Vehicle Speed – Speed is displayed to WHOLE numbers only – no decimal point
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometres
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob –
for manually increasing or decreasing the total distance travelled in case of corrections
Suitable for BOTH Negative and Positive earthed vehicles
Dimensions: 120 (140 inc mounting flanges) x 100 x 45mm
BR8
ESSENTIAL EXTRAS:
• BRANTZ Sensor
• In-Line Fuse Kit (BRFUSE)
OPTIONAL EXTRAS:
• International Driver Display (BR81) – International 3-DD Pro
(BR8-DD) Required
• Plug Kit (BR43)
• NEW - International Window Mount (BRINT-RAM-W)
• Dual Sensor Switch (BR49)
• Electronic Average Speedtable (BR19)
• Pulse Doubler (BR52)
• Sensor Extension Cable (BR2X)
• Timer V2 (BR32V2)
• Sun Screen/Night Filter (BRSS7)
• Power Conditioner (BR21) – Essential for 6V Vehicles
www.brantz.co.uk 8
International 3-DD Pro + Driver Display Unit
BR8-DD + BR81
The International 3-DD Pro has been modified to allow the addition of a Driver Display Unit.
As with the standard International 3 Pro features including:
Triple Displays (Red LEDs ~ 15mm high)
• Total Distance • Current Speed
• Intermediate Distance
Calibrated easily via push-wheel switches on the front of the unit.
999.9 Maximum Total Distance (with adjustable decimal point: 00.00
or 000.0)
99.99 Maximum Intermediate Distance
999 Maximum Current Speed - Displayed to WHOLE numbers only
Remote Zero Unit to operate the Intermediate Display - INCLUDED
Can be calibrated to read in Miles or Kilometres
Zero, Forward, Reverse and Freeze Buttons on the front face of the Meter. Plus a Stepper Knob –
for manually increasing or decreasing the total distance travelled in case of corrections
Suitable for BOTH Negative and Positive earthed vehicles
Driver Display Mode selection button
Requires a Brantz Sensor & Fuse
This unit also has the facility for a detachable Driver Display Unit
– BR81 (sold separately):
The Driver Display will mirror one of the following from the main tripmeter:
• Total Distance • Current Speed
• Intermediate Distance
Dual Operated View Mode Selection Buttons – Driver or Co-driver Operated
LED Display Mode Indicator
Dimming Switch for Night Stages
Dimensions: 80 x 40 x 60mm
BR81: International Driver Display Unit
www.brantz.co.uk 9
International Plug & Go Bundles
All of the International model tripmeters have the ability to be purchased as a Plug & Go Bundle.
These tripmeters can be quickly and easily fitted to any vehicle, modern or classic, and also easily moved
between vehicles as there is no mechanical sensor to wire in, just a GNSS sensor which can be mounted
on the dash by the windscreen.
This system is great for reccying routes or for beginners who are just starting out and do not know
whether to go ahead and fit a mechanical sensor to their car just yet.
Installation can be even quicker with the addition of a 12V AUX Plug for power.
Mounting can also be super easy with an International Window Mount.
The Tripmeters can either be Standard or the Driver Display compatible versions:
International 2 GPS Pro (BR6-GPS-P)
International 2 Driver Display GPS Pro (BR6-DD-GPS-P)
International 2S GPS Pro (BR7-GPS-P)
International 2S Driver Display GPS Pro (BR7-DD-GPS-P)
International 3 GPS Pro (BR8-GPS-P)
International 3 Driver Display GPS Pro (BR8-DD-GPS-P)
The standard versions are also available to hire from us if you are doing a one off taster event.
BR8-GPS-P + BRGPS-P
www.brantz.co.uk 10
Laser 3
BR34
The Brantz Laser 3 Rally Computer is a sophisticated High Precision
Instrument able to show the following information:
24hr Time of Day (HH:MM:SSSS)
2 x Stopwatches (00.00)
Functions Include: Zero, Freeze, Hold and Auto Start
2 x Distance Read Outs (000.000) - Viewed via Shift-able 4 Digit Windows
Functions Include: Up/Down Counting, Zero, Freeze and Hold
2 x Speed Read Outs: Current Speed - Maximum Speed - Average Speed
Other features include:
• Can be Calibrated in Miles or Kilometres
• Optional Hard-Wired Hand (BR44) or Foot Remote (BR44F) - RECOMMENDED
• Extremely Accurate 4 digit Calibration Entry
• Programmable Digital Fuel Gauge
• Optimisation of Car Performance Tuning using the Acceleration figures:
• From: 0, 30, 50 or 70 mph/kph
• To: 60, 100 or 120 mph/kph
• Standing Start times up to a Mile/Kilometre or
Quarter Mile/Kilometre
• Available as a Plug & Go GNSS Unit when bought
with Brantz Satellite Seeker (BRGPS-P)
Dimensions: 140 x 80 x 35mm
Requires a Brantz Sensor & Wiring Kit
Wiring Kit PLUS for Laser 3
BR342
All the cabling required to connect up your Laser 3 to a Brantz Sensor; including Power Cable, Sensor Cable,
In-Line Fuse Holder and Fuse.
As featured in Codemasters 'Dirt 2'
www.brantz.co.uk 11
Retrotrip 2
BR9C: Classique
BR9M: Mulsanne
BR9C/BR9M
The Retrotrip 2 Classique has been designed for use in the majority of historic and retrospective rallies. This period
tripmeter is accurate to one hundredth of a unit (miles or kilometre) and with their electro-mechanical clicking
digits can be seen as 'fiddle proof', hence their widespread approval.
Dual Display
• Total Distance
• Inter Distance
Calibrated via (protected) push-wheel switches on the underside of the Meter in Miles or Kilometres
999.99 Maximum Total Distance
999.99 Maximum Intermediate Distance
Independently Zeroed displays
Display Lenses for increased digit size
Last 2 digits are RED on WHITE background for clarity of the tenths and hundredths of a Mile/Kilometre
- Mulsanne Model has ALL WHITE digits – LIMITED EDITION
12 Volt Illumination – NEW Brighter LED Lighting
Suitable for BOTH Negative and Positive earthed vehicles
Driver Display Unit Connectivity as Standard
Dimensions: 67x 117x 73mm (70x 142 x 85mm inc Mounts & Hood)
ESSENTIAL EXTRAS:
• BRANTZ Sensor
• In-Line Fuse Kit (BRFUSE)
RECOMMENDED EXTRAS:
• Power Conditioner (BR21) – Essential for 6V
Vehicles
• Plug Kit (BR43)
OPTIONAL EXTRAS:
• NEW Retro 2 Window Mount (BR9RAM-W)
• Driver Display Unit (BR91)
• Retrotrip Back-Tracker (BR59)
• Dual Sensor Switch (BR49)
• Electronic Average Speedtable (BR19)
• Pulse Doubler (BR52)
• Sensor Extension Cable (BR2X)
• Timer V2 (BR32V2)
www.brantz.co.uk 12
Retrotrip 3 Classique
BR10C
The Retrotrip 3 Classique is the next step up from the Retrotrip 2. It has all the same features including accuracy to
one hundredth of a unit (miles or kilometre) and the electro-mechanical clicking counters that has made the
Retrotrip eligible for historic rallies throughout the world. The Retrotrip 3 in comparison contains TWO completely
separate and independent tripmeters in the one case, both fed from the same sensor.
Triple Display:
• Total Distance
• Inter Distance
• Separate Tripmeter enabling Average Speed Calculations with the aid of a Stopwatch
Each tripmeter is calibrated easily via independent push-wheel switches on the front face
Separate ON/OFF switch for each tripmeter, as well as a main ON/OFF switch on the front face
999.99 Maximum Total Distance
999.99 Maximum Intermediate Distance
Can be calibrated in Miles or Kilometres
Independently Zeroed displays
Display Lenses for increased digit size
12 Volt Illumination – NEW Brighter LED Lighting
Suitable for BOTH Negative and Positive earthed vehicles
Driver Display Unit Connectivity as Standard
Dimensions: 100x 140x 75mm (110 x 170x 95mm inc Mounts & Hood)
ESSENTIAL EXTRAS:
• BRANTZ Sensor
• In-Line Fuse Kit (BRFUSE)
RECOMMENDED EXTRAS:
• Power Conditioner (BR21) – Essential for 6V
Vehicles
• Plug Kit (BR43)
OPTIONAL EXTRAS:
• Driver Display Unit (BR91)
• Retrotrip Back-Tracker (BR59)
• Dual Sensor Switch (BR49)
• Pulse Doubler (BR52)
• Sensor Extension Cable (BR2X)
• Timer V2 (BR32V2)
www.brantz.co.uk 13
Retrotrip Driver Display – Classique Model (BR91C)
Retrotrip Driver Display Unit
The Retrotrip Driver Display Unit works with both the Retrotrip 2 and Retrotrip 3 tripmeters and will sit
neatly in front of the driver, replicating the distance count of its parent Retrotrip. It has the same electromechanical
clicking counter as the rest of the Retrotrip range, giving the unit widespread approval.
BR91
FEATURES:
Single Display
Total Distance
999.99 Maximum Distance
Available in 2 Styles:
Classique (BR91C) – last 2 digits RED on WHITE
Mulsanne (BR91M) – ALL WHITE digits
Independently Zeroed Display
12v Illumination from LED lighting under the hood
Option of lighting On or Off to prevent glare
Cable Length: 1.8 meters
Dimensions: 40 x 100 x 75mm (40 x 100 x 90mm inc Hood)
Also works in conjunction with the Retrotrip Back-Tracker (BR59)
Retrotrip Driver Display – Mulsanne Model (BR91M)
www.brantz.co.uk 14
Retrotrip Back-Tracker
BR59: Retrotrip Back-Tracker
BR59
The Retrotrips themselves do not have the facility to count backwards, which is one of the many features
that make it so popular in the historic events. But what if you make a mistake?
This is where the Retrotrip Back-Tracker comes in. This handy gadget, when activated, stores the
distance you drive to correct your error. Then when you are back on the correct road a simple flick of a
switch and the Back-Tracker counts out your incorrect Miles/Kilometres, not allowing your Retrotrip to
count up until it has erased all those incorrect Miles or Kilometres you gathered.
FEATURES:
Available in 2 styles:
Standard Version (BR59) - Connects directly to the 3 core grey Sensor Cable of the
Retrotrips
Plug Kit Version (BR59PK) - Connects directly to the 4 pin plug & Socket of the Plug Kit
Retrotrips
Store Function
Discharge Function
Clear All Button - in the event of coming across a Timing Point
Retrotrip Back-Tracker - Plug Kit (BR59-PK)
www.brantz.co.uk 15
MECHANICAL SENSORS
Brantz Standard Wheel Sensor
BR2A
This 12mm diameter Wheel Sensor can be mounted on almost any car in a variety of different locations
and set ups. The most common set up is mounted to pick up the metal bolt heads on your brake disc as
they pass by. A minimum of 4 bolts are required, however 6 is recommended. Steel is the optimum
target and being at least 20% larger than the face of the sensor, this is also true for the size of a hole
being used to trigger the sensor.
Alternative positioning:
• Mounted to pick up on flying tabs (minimum of 2 positioned 180° apart) fastened on the bolts of
the Prop Shaft's Universal Joint.
• Mounted to pick up off an ABS ring
• Mounted through the back plate of Drum Brakes to pick up off the 4 hub studs
• Mounted to detect an absence of steel, for example drilled holes in a rotating disc.
Brantz High Temperature Wheel Sensor
BR2A-HT
The BR2A-HT is a 12mm device that works in exactly the same way as the Standard Wheel Sensor
version, however, it is specially designed for High Temperature situations such as extremely hot climates
or courses with increased levels of braking. The Operating Temperature is rated up to 120°C.
www.brantz.co.uk 16
Brantz Wheel Sensor - 4mm
BR2A-4mm
The BR2A-4mm also has 12mm thread and works in exactly the same way as the standard version
(BR2A), however, it is specially designed with a larger sensing distance of 4mm. It is ideal for positioning
where there might be slight movement due to normal wear and tear or the need for necessary
adjustment. Any such movement could be too great for the Standard Wheel Sensor. The more triggers
available the more accurate the tripmeter will be.
Brantz Drive\Prop Shaft Sensor
BRH2
These sensors, for generic detection of rotating shafts, provide a much larger sensing distance of up to
10mm, and come supplied with a specially designed adaptable mounting bracket kit.
The Type BRH2 sensor is ideal for particularly old (pre-war) cars, or as a fall-back sensor to be utilised when
the more easily implemented types are not suitable.
www.brantz.co.uk 17
Brantz Universal Speedometer Cable Sensor
BR1
This moulded plastic unit fits in the length of almost any speedometer cable.
2 x Fastening Clips included.
Note: Some old cables require holes to be slightly enlarged due to larger than normal inner cable
dimensions.
Maximum Inner Cable Diameter: 3.5mm (2.5mm without drilling)
Maximum Outer Cable Diameter: 10mm
Brantz (Smiths/Jaeger) Sensor M12 Fitting with Square Drive Pin
BRM12
This Brantz Sensor has a M12 x 1mm fitting with a 2.7mm square pin drive and will fit most Smith &
Jaeger Speedometers as an alternative to a cable or Gearbox Sensor.
www.brantz.co.uk 18
Brantz (Japanese) M22 Gearbox Sensor
BR3
Most Japanese manufacturers have standardised their gearbox outputs to accept a M22 x 1.5mm thread
which has a round pin drive with a ‘lug’ pinched onto the side.
This unit can be fitted to either the gearbox or speedometer end of your speedometer cable (thread and
space permitting).
Brantz (Japanese) High Grade
M22 Gearbox Sensor – Dual Fitting
BR3-HG-2
The M22 Gearbox Sensor (pg19) also comes in this High Grade Version. As well as being designed to
withstand the rigours of rough terrain, this sensor comes with 2 drive pin options for differences in the
Nissan and Mitsubishi vs Toyota and Suzuki fittings.
www.brantz.co.uk 19
Brantz (Japanese) M22 Gearbox Sensor with Square Drive Pin
BR3-SQ
For the select few Japanese manufactured gearbox outputs with the M22 x1.5mm thread, but not the
pinched pin drive, we also supply this M22 x 1.5mm version with a 2.7mm square pin drive requirement.
This unit can be fitted to either the gearbox or speedometer end of your speedometer cable (thread and
space permitting).
Brantz (European) M18 Gearbox Sensor
BR4
Most European manufacturers (Ford/GM/Vauxhall/VW/Skoda/Lada/Fiat) have standardised their
gearbox outputs to accept a M18 x 1.5mm thread which has a square pin drive.
This unit can be fitted to either the gearbox or speedometer end of your speedometer cable (thread and
space permitting).
More gearbox/speedo sensor types are available on special order, please contact us if you do not see
the type you require.
Please note the vehicles listed above are for guidance purposes only, gearboxes are often changed, may
no longer be the original or just be a variation so please make sure you check the gearbox or
Speedometer fitting before making your purchase.
www.brantz.co.uk 20
Customer Gallery
www.brantz.co.uk 21
Customer Gallery
www.brantz.co.uk 22
Customer Gallery
www.brantz.co.uk 23
Photos by: Will Broadhead Photography
www.brantz.co.uk 24
ELECTRONIC SPEEDOMETER SENSORS
Brantz Electronic Speedo Interface
BR5
This interface is intended to safely drive Brantz meters from digital pulse supplies found on vehicles
fitted with digitally pulsed electronic speedometers or tachographs and as such, substitute for other
types of motion sensors.
Some types of ABS sensors are suitable as inputs to the interface, though some ABS systems do not
generate a speedometer pulse until they reach a certain speed and so are not capable of accurate work,
please check this with your vehicle manufacturer.
GLOBAL NAVIGATION SATELLITE SYSTEM (GNSS)
Brantz Satellite Sensor
A non-mechanical, easy fit, sensor that will connect to the full range of Brantz tripmeters with a no
calibration required option. This unit will convert any Brantz tripmeter to a GNSS trip.
BRGPS
This unit simultaneously tracks many different satellites such as the Russian (Glonass), Chinese (BeiDOU)
and American (GPS) systems, giving connection in the most testing environments. If, however, satellite
links are lost (maybe in a tunnel) then it will calculate and recover the distance lost as a straight line.
This sensor can be retro-fitted to your existing Brantz Tripmeters.
Alternatively it is available as a Plug & Go Bundle when bought together with the tripmeter. This plugs
straight in, no mechanical sensor or additional wiring required.
www.brantz.co.uk 25
CANBUS INTERFACES
Brantz CANBUS Interface – Hard Wired Version
BR56
Most cars after 2005 have a CANBUS system. This is a multiplexed wiring system used to connect intelligent
devices such as Gearbox and Engine Electronic Control Units (ECU's), Speed, ABS and Stereo information;
allowing data to be transferred conveniently throughout the vehicle. The Brantz CANBUS Interface Sensor
allows you to tap into the CANBUS system to pick out the speed pulse from your vehicle. These units are
vehicle specific so the make, model and year of vehicle would have to be supplied upon purchasing.
Please refer to our website for a list of vehicles that this sensor is suitable for.
These units come with a choice of 2 RECOMMENDED Meter Mounting Kits. Please see below:
Brantz CANBUS Plug Kit
BR45
This option is for fitting to Brantz Meters which have a Male plug
attachment fitted.
Brantz CANBUS Wiring Kit
BR47
This option is for attaching the CANBUS Sensor directly to a Brantz Meter
Sensor Cable with crimped ends (i.e. no Plug)
We also STRONGLY RECOMMEND fitting a Contactless CAN Reader (BRCCR) when tapping directly into
your CAN wires as this is a non-intrusive method of connection, therefore not voiding any warranty on
new vehicles
Please Note: not all vehicles send the speed pulse via the CANBUS so please check with your vehicle
manufacturer.
www.brantz.co.uk 26
Brantz CANBUS Interface – Plug & Go Version
BR57 or BR58
This Brantz CANBUS Plug & Go Sensor allows you to access the CANBUS system via the OBDII socket (used
by diagnostic engineers) to pick up the speed pulse from your vehicle. This nifty piece of kit makes it
extremely easy to tap into the speed pulse of newer vehicles without the need to mechanically fit a sensor.
It is very useful when using, for example, hire cars or proofing the route in your modern course car.
2 Versions are available to accommodate more vehicles; please refer to our website for a list of compatible
vehicles.
These units come with a choice of 2 RECOMMENDED Meter Mounting Kits. Please see below:
Brantz CANBUS Plug Kit
BR45
This option is for fitting to Brantz Meters which have a Male plug
attachment fitted.
Brantz CANBUS Wiring Kit
BR47
This option is for attaching the CANBUS Sensor directly to a Brantz Meter
Sensor Cable with crimped ends (i.e. no Plug)
Please Note: not all vehicles send the speed pulse via the CANBUS so please check with your vehicle
manufacturer.
www.brantz.co.uk 27
TIMERS + ACCESSORIES
Brantz Timer V2
BR32V2
The Brantz Timer is a Multifunctional Stopwatch and Clock for all your rally needs, packed full of features
but keeping the distinct Brantz easy read displays.
We have kept the same height and display size as the Brantz Range of International Tripmeters so this
unit sits alongside as a perfect pair.
Features:
• Real Time Clock
◦ 24Hr
◦ 12Hr
◦ 10Hr
◦ 100 th of a Minute
• Large 4 digit Stopwatch
◦ Minutes & Seconds
◦ Seconds
◦ Decimal Seconds
• 4 Mode Stopwatch:
1. Standard Stopwatch – Start, Stop, Reset, Freeze
Stopwatch (inc Time of Day Hold)
2. Regularity Stopwatch – Start, Stop, Reset, 32 second Hold of Stopwatch (inc Time of Day
Hold) with automatic Restart in the background.
3. Jogularity Cumulative Stopwatch – Start, Stop, 32 second Hold of Stopwatch (inc Time of
Day Hold) with continued stopwatch counting in the background.
4. Standard Cumulative Stopwatch – Start, Stop, Reset, Freeze Stopwatch (inc Time of Day
Hold) with continued stopwatch counting in the background.
• Automatic Stopwatch Start
• Suitable for BOTH Negative and Positive earthed vehicles
• Dimmable Display
• ON/OFF Switch
• All Set Up Settings saved on power down.
• Optional Plug Kit
Dimensions: 100 x 75 x 41 mm
Includes the Remote Button required for certain functions.
Comes factory fitted with a socket to plug in a Driver Display Unit
ESSENTIAL EXTRAS:
• In-Line Fuse Kit (BRFUSE)
OPTIONAL EXTRAS:
• Rally Timer Driver Display (BR321)
• Plug Kit (BR43-RT)
• Rally Timer Mounting Plate (BR32BK)
• Sun Screen Filter (BRSS32)
• Dual Zero Remote (BR44DR) – zeros both the trip and the
rally timer simultaneously.
• Power Conditioner (BR21) – Essential for 6V Vehicles
www.brantz.co.uk 28
Rally Timer Driver Display
BR321
This detachable Driver Display Unit plugs into the base of the Brantz Rally Timer Plus (BR32+) OR Timer
V2 (BR32V2) that have the corresponding socket fitted.
The Driver Display Unit will mirror whatever is shown on the Rally Timer STOPWATCH - this keeps both
the Driver and Co-Driver working to exactly the same time.
FEATURES:
• Display Dimming Facility for Night Stages
• Same Size as the International Driver Displays
OPTIONAL EXTRAS:
• International & Rally Timer Driver Display Sun Screen / Night Filter (BRSSDD)
Rally Timer Mounting Plate
BR32BK
This mounting plate, fixes to the back of our Brantz Rally
Timer PLUS (BR32+) or Timer V2 (BR32V2) using the existing
screws to give the Rally Timer Mounting Flanges identical to
the International range of tripmeters.
Dimensions: 98mm x 100mm x 3.6mm
www.brantz.co.uk 29
WP Timer WPT 001
This new electronic precision stopwatch has been specially developed
for the timing of historic regularity rallies, historical and
modern motorsport.
The innovative technology of the WP Timer makes the electronically
programmable stopwatch a precise and reliable companion
for time measurement in motorsport.
Specifications & Features
2 Available Versions:
• Standard (WPT001)
• Expert (WPT001-E)
Highest measuring accuracy (+/- 0.000008 seconds)
4 displays
• Minimum display: 1 1/100 second
• Maximum display: 9 hours, 59 minutes, 59 seconds, 99 1/100 seconds (Also 99 minutes,
59 seconds, 99 1/100 seconds on Expert)
Direction Stopwatches: forward (count up) and backwards (count down)
Sound signal for acoustic support for the active time for the last 10 seconds, louder from 3 seconds
until the end signal at zero
Volume adjustable and can be used with headphones
Time setting via user-friendly pressure control dial
Triggering the times via pushbuttons on the device or external hand or foot switch (sold separately)
Illuminated display filtered for readability in sunlight
Operable in 3 different modes, selected via a toggle switch:
1. Round Course Mode: Set your own target time with the first round, reach this target time in the
following rounds. With the one-button operation at the respective crossing of the start / finish
line, easy to do. Timing for any number of laps.
2. Nuvolari Mode: Pre-programmable countdown time measurement, with photocells/time controls
linked together. One button operation stops one timer and starts the next.
Up to 4 programmable times (12 on the EXPERT version (WPT001-E))
3. Hidden Mode: For scored special stages, e.g. 2 timers start at the first photocell / tube / control.
With the multi-keys it is very easy to start or stop 2 timers simultaneously.
Up to 4 programmable times (12 on the EXPERT version (WPT001-E))
Update to EXPERT version: For all WP-Timer STANDARD an update to the EXPERT version can be added
at any time. For a software update, please contact us.
Accessories Available – please contact Brantz for more information.
www.brantz.co.uk 30
Power Conditioner
ACCESSORIES
BR21
The Brantz Power Conditioner is an essential item for connecting your International Tripmeter or
Retrotrip to a 6 volt vehicle.
It has been designed to provide a reliable, smooth voltage
source. This item is strongly recommended for Retrotrip units
not only on 6 volt vehicles but also when fitted to a vehicle
with a 12 volt power system of the less reliable dynamo type.
Contains a resettable fuse which will disconnect the power for
approx. 30 seconds and then reconnect if temporarily
overloaded.
Note: The Power Conditioner is intended to supply only ONE
tripmeter! The unit will not compensate for loose connections
or interference type faults.
Plug Kit
BR43
The Plug Kit enables the removal of Brantz meters from
your vehicle for safe keeping, or to share one meter
between several vehicles. They can be factory fitted to the
Tripmeter when ordered together or retrospectively fitted
to your existing meter. Also available for the Rally Timer
(BR43-RT)
Dual Sensor Switch
BR49
This handy piece of equipment allows you to connect 2
sensors to one tripmeter, so should one fail mid-rally you can
just flick a switch to bring in to use the backup sensor. As a
result you will not lose any of your previously recorded
measurements – Don't forget to adjust your calibration
figures!
Fuse Kit
BRFUSE
All Tripmeters and Retrotrips MUST have a 2amp fuse fitted between
the battery and the Meter – this kit provides you with an easy to attach
In-Line Fuse Holder and 2 x 2amp blade fuses.
www.brantz.co.uk 31
RAM Mounts
RAM Mounts are available for both the Retrotrip and International range and come in two forms:
BR9-RAM (pictured): The Retrotrip 2 RAM Mount is specially
designed to fit the RAM range of mounts. So you
can fit your Retrotrip into your vehicle in a variety of different
ways, permanently fixed or removable - multiple
accessories available from RAM UK
BRINT-RAM: The International RAM Mount is again specially
designed to fit the RAM range of mounts, so you
can fit your International into your vehicle in a variety of
different ways, permanently fixed or removable - multiple accessories available from RAM UK
You can either buy just the backing plate for mounting with your own RAM Mounting equipment or
we can supply as a Suction Window Mount Version.
Retrotrip Window Mount – Pictured below
International Window Mount
(BR9-RAM-W)
(BRINT-RAM-W)
This heavy duty suction cup, when fitted on a clean windscreen, will hold onto your Retrotrip or International
with no questions asked. The mount has vibration dampening so the displays remain clear and
easy to read and will not let go, no matter how bumpy that last section was.
This 3 part Window Mount is made up of; the Mounting Plate (BR9RAM or BRINT-RAM) - which securely
grips your Retrotrip/International, The Double Arm Socket - to connect the Mounting Plate to the Base
via the RAM ball and socket system and is what gives your mount its adjustability, and the Heavy Duty
Suction Cup Base – with twist to lock security.
www.brantz.co.uk 32
Fokkens International Tripmeter Window Mount
GFK001
Take your tripmeter home with ease after the rally. A handy tool for your Brantz International
Tripmeter.
This window holder is equipped with a very good suction cup. Clean your windscreen and the suction
cup with glass cleaner (PowerGer PG8) from time to time and the suction cup will never let go of the
window.
The set includes all required screws and spacers. The suction cup can be mounted in the holder in two
places depending on your preferred positioning.
Suitable for the following models:
BR6/BR6-PK/BR6-DD/BR6-DD-PK/BR6-GPS
BR7/BR7-PK/BR7-DD/BR7-DD-PK/BR7-GPS
BR8/BR8-PK/BR8-DD/BR8-DD-PK/BR8-GPS
Also available in a double mount version to hold BOTH an International Tripmeter and a Rally Timer,
please see part code below:
Fokkens Trip & Timer Mount
GFK002
www.brantz.co.uk 33
BR44
BR44B
Standard Hard-Wired Remote
BR44
The White Hard-Wired Remote Reset Box comes pre-fitted to the International 2, 2S and 3. It can also be
fitted to the Laser 3 (BR34) to Zero the Lower distance read out as an optional extra.
This item is also available in Black with White text
Pt Code: BR44B (Pictured)
The Black Remote Reset (BR44B) can be factory fitted to a new Tripmeter as a 'Special Order'
Hard-Wired Foot Remote
BR44F
This Hard-Wired Foot Remote is an easy to use foot-pedal that can be situated in the foot well of your
vehicle for quick resetting whilst keeping your hands free.
As with the Standard Hard Wired Remote it can also be fitted to the Laser 3 to Zero the Lower Distance
read out or to replace the standard remote in the International tripmeters.
www.brantz.co.uk 34
Dual Remote Reset
BR44DR
This Brantz Hard-Wired Remote Reset Box can be fitted to both the
Brantz Tripmeter AND the Brantz Rally Timer.
FEATURES:
• Simultaneously Zero BOTH the Tripmeter and Rally Timer via
a Toggle Switch
Zero the Tripmeter independently via a Push Button
Zero the Rally Timer independently via a Push Button
BRSS7
BRSS32
Sun Screen/Night Filter
BRSSDD
Available for:
• International Tripmeters (BRSS7)
• Rally Timer PLUS/Timer V2 (BRSS32)
• International & Rally Timer Driver Display (BRSSDD)
An easy to fit filter for over the face of any of the International Tripmeter range, Rally Timer or Driver
Display, a great flip down cover especially in open top cars. Designed to prevent any unwanted glare or
reflection on the brightest of sunny days. Can also double as a Night Filter if you would like the display
lights dimmed.
Peel & Stick Hinge Fastening to your Brantz Included
www.brantz.co.uk 35
12V 2amp AUX Plug (Cigarette Lighter Plug)
12VAUX
Plug and Go Adaptation for the Power Cable of your Retrotrip, International tripmeter or Rally Timer.
This can be factory fitted to the Tripmeter when ordered together or retrospectively fitted to your
existing meter.
FEATURES:
• 2amp fitted fuse
• LED Power indicator
• Solder on Connection
• Weight: 10g
Ground Sheet / Tarpaulin
BRTARP
Super Heavy Duty Ground Sheet, Black Top Side, 1.2m x 1.8m 270GSM
FEATURES:
• Super Heavy Duty – 270GSM
• Dimensions: 1.2M x 1.8M
• Top Side: Black
• Bottom Side: Silver
• Rot-proof & Shrink-proof
• 20mm diameter Brass Eyelets on all 4 sides
• Sturdy 3 Rivet Reinforced Corners
www.brantz.co.uk 36
Electronic Average SpeedTable
The Brantz Electronic Speedtable is a pocket sized device which helps you maintain an accurate average
speed over any distance. It works in conjunction with your Brantz International or Retrotrip but no direct
connection is required.
FEATURES:
2 Styles available:
• model A9 (BR19-A9) – beeps every 100M or every 1Km (10th of a mile or 1 mile)
BR19
• model A5 (BR19-A5) – beeps every 10M or every 100M (100th of a mile or 10th of a
mile)
Single display
• distance
Back-Light Button
• Factory Modification available – External switch for permanent Light ON or OFF
Average Speed Accuracy to 1 decimal place i.e. 25.4mph/kph
• Factory Modification Available – Increased accuracy to 2 decimal places
Recalculate Average Speed Mid-Distance
Recalculate Average Speed and Zero Distance
Retrospective Average Speed Recalculation
SPECIFICATIONS:
• Requires 9V Battery - SUPPLIED
• Dimensions: 60 x 105 x 30mm (Height x Width x Depth)
• Weight: 142g
ESSENTIAL EXTRAS:
Brantz Tripmeter
www.brantz.co.uk 37
Stopwatch & Clock
BR42
This Stopwatch & Clock (version 1.1) features hours, minutes, seconds and hundredths of a second, spread
over two uses of a large format four digit LCD screen.
The primary function of this standalone stopwatch is to hold the time of day for logging purposes, then
restores the current time of day to the readouts following the noting of the time.
A bonus feature is that this clock holds a memory of the previous frozen time, just in case the screen freeze
is released accidentally before the time is fully noted or agreed. A good quality alkaline PP3 battery lasts
about a week, but use of the night lights will reduce this life. A lithium type battery is slightly more
expensive, but can last even longer.
FEATURES:
• Single Display
• Back-Light Button
• Factory Modification available – External switch for permanent Light ON or OFF
• Lanyard Fixing Point
• Last Reading Memory Recall
SPECIFICATIONS:
• Requires 9V Battery – SUPPLIED
• Lanyard - SUPPLIED
• Dimensions: 60 x 105 x 30mm (Height x Width x Depth)
• Weight: 142g
www.brantz.co.uk 38
SENSOR ACCESSORIES
Brantz Sensor Pulse Doubler
BR52
Brantz Tripmeters and Retrotrips which are fitted to vehicles with a
low number of pulses feeding to the tripmeter produce a low
calibration figure. If this figure is normally in the range under 499
(or 999 on a Laser 3) then the calibrated accuracy of the tripmeter
can be improved by doubling the number of pulses produced by the
sensor.
This device will fit in-line with the grey sensor cable coming from
the tripmeter. This will result in the doubling of the tripmeter
calibration figure, which makes a finer step between one calibration
figure and the next. Extension cables are available from Brantz for
ease of fitting (BR2X). The extension cable will connect as normal to
the Brantz wheel type sensor or any of the Brantz speedometer
cable or gearbox sensors.
Brantz Pulse Reducer
BR5-2A
The interface is intended for use in conjunction with the Brantz Universal Wheel Sensor (BR2A) / High
Temperature Wheel Sensor (BR2A-HT) or 4mm Wheel Sensor (BR2A-4mm) when the pulse rate is too
high for the calibration push-wheel digits on the meter to compensate.
If you need to reduce the number of pulses produced from any of the
other Brantz Sensors, you would need to fit a Brantz Electronic
Speedo Interface (BR5) in between your sensor and your tripmeter
Sensor Extension Cable
BR2X
3M extra cable length for longer vehicles or just if the sensor is far
from the meter. Includes crimped ends and terminal blocks.
www.brantz.co.uk 39
Which Sensor?
Brantz Rally Tripmeters require a sensor to send travel information up to the instrument so that it can calculate
and display just how far the vehicle has travelled.
The most suitable sensor is chosen from a few key factors pertaining to the vehicle that the tripmeter is being installed
into.
The criteria are:
1. Positioning – You need to be able to access your sensor, but you don’t want it easily dislodged or knocked
2. Accuracy - Different sensor types may give you different calibration figures and possibly increased accuracy
for your particular vehicle
3. Ease of Fitting – Do you prefer mechanical or electrical if that is an option. Or even Plug & Go if allowed.
4. Cost Considerations - Remember the cost includes fitting time and servicing time.
The first choice is the screw-on gearbox sensor that fits between your gearbox and Speedo Cable this option is the
fastest and easiest to fit. It has great reliability as it is not near high heat sources or in the path of flying under-car
debris.
Some of the types we are stock are;
BR3: M22 Japanese Gearbox Sensor with a Pinched Pin Drive
BR3-HG-2: M22 High Grade Japanese Gearbox Sensor with 2 Drive Pin Styles (Pinched Pin or Spade)
BR3-SQ: M22 Gearbox Sensor with a Square Pin Drive
BR4: M18 European Gearbox Sensor with a Square Pin Drive
If you have a different variation of gearbox thread than our standard fittings above, please feel free to contact us
with the thread, pitch and drive pin shape of your speedo-cable feed as we can source alternative sizes.
If the vehicle has a mechanically driven speedometer but is not suitable for a gearbox sensor, if space is
limited or on older British cars with imperial gearbox thread, then your options are BR1: Universal
Speedometer Cable sensor which fits in the length of the existing speedometer cable. This choice will
require the removal of the speedo cable and cutting of the speedo cable sleeving, which is a little more
effort, but is an excellent and common choice. Alternatively the BRM12: Smith/Jaeger Speedometer
Sensor, which will fit most of the Smiths and Jaeger Speedometers apart from the very early ones.
The first generation of cars which had an electronically driven speedometer (i.e. there was no mechanical
cable) generated pulses from a device screwed onto the gearbox where the old cable once went, or
from a dedicated sender built into the transmission chain. They are three-wire devices; one wire being
ground, one wire being +12v power when the ignition key is ON, and the one wire we are interested in,
which has a digital signal on it. The voltage on this wire if viewed by a voltmeter will go up to 12volts and
down to ground a few times per revolution of the transmission. For these vehicles the sensor would be a
BR5: Electronic Speedo Interface. Connect the digital signal wire mentioned above to the single terminal
end of the BR5 interface. The other end of the interface goes to the tripmeter. The BR5 will prevent
the car and the tripmeter from damaging each other. Additionally the BR5 allows a very high pulse rate
source (such as for some Astra cars) to be divided down to a reasonable pulse rate so that our tripmeters
can calibrate in the normal range. Very quick and easy to fit.
Rally cars competing on loose surfaces use a lot of wheel spin at the driven wheels. This scenario dictates
that for accuracy the tripmeter will need to pick up from a non-driven wheel using the BR2A:
Wheel Sensor. For hot climates and runs with increased amounts of braking we would recommend a
BR2A-HT: High Temperature Wheel Sensor which will cope with temperatures up to 120°C. Both these
sensors have a 1mm sensing distance, minimising the likelihood of debris becoming lodged between the
sensor and its pick-up. For situations where there is likely to be movement between the sensor and pickups,
such as at the extremities of the wheel, we would recommend our BR2A-4mm: Wheel Sensor with
a slightly larger sensing distance of 4mm.
www.brantz.co.uk 40
An alternative positioning for our BR2A range of sensors is to pick up on flying tabs (minimum of 2 positioned
180° apart) fastened on the bolt heads of the prop shaft’s Universal Joint.
Customers may wish to fit a backup sensor (possibly of a different type, or maybe the same type fitted
onto a different wheel) to cover for damage. In order to connect your 2 sensors up to the one tripmeter
we recommend our BR49: Dual Sensor Switch which allows you to quickly and easily switch to your back
up sensor without having to get out of your vehicle.
Some vehicles cannot use any of the above sensors such as; modern vehicles with ABS systems which
only generate pulses above 7kph for their own speedometers, 4wd type vehicles and also Pre-War vehicles
whose speedometer cable is particularly large or sealed to the outer sleeving. In these cases we
would recommend the BRH2: Drive/Prop Shaft Sensor. These are straightforward to fit, but care should
be taken to fit them in a location which does not suffer from flying debris or moving out of alignment
with the suspension etc.
Another alternative if you are using a modern car; or are doing a race reccy in your everyday car is the
BR57-58: CANBUS Interface. These plug directly into your diagnostic OBDII socket (usually located in the
drivers foot-well) and is extremely easy to fit or remove without any mechanical or electrical effort.
Simply Plug & Go. This is really only for vehicles newer than 2005 but older than 2017.
Some very new vehicles have the CANBUS system but not available at the OBDII socket, in this instance
we do a version that wires directly to the CAN HI & CAN LO wires BR56: CANBUS Interface, either directly
or via our BRCCR: Contactless CAN Reader should you not wish to void your warranty.
N.B. Please check before purchasing that your vehicles speed pulse is fed into the CANBUS system.
If the information is not available at the vehicles OBDII Socket an alternative Plug & Go system is our
BRGPS: Satellite Seeker. This GNSS system is extremely accurate, again great for rally reccy's in your
modern vehicle or hire car and 4wd drive events where there is likely to be a lot of wheel spin on all
wheels.
Too Few Pulses:
If your sensor set up results in a particularly low calibration figure – under 499; we would advise fitting a
BR52: Pulse Doubler in between the sensor and the tripmeter to raise the calibration figure, which in
turn increases the tripmeter accuracy.
Too Many Pulses:
If your sensor set up results in a too high a calibration figure to enter on your tripmeter – over 999; you
will need to fit a BR5-2A: Pulse Reducer between your BR2A: Brantz Wheel Sensor and the tripmeter.
If you are getting too many pulses from a sensor other than the Wheel Sensor, you would need to use
the BR5 as a Pulse Reducer.
www.brantz.co.uk 41
PRICE LIST
BRANTZ Competition Tripmeters PART CODE 2020 RRP (Exc VAT) GBP
International 1 Pro BR13 £124.85
International 2 Pro BR6 £174.38
International 2-DD Pro BR6-DD £225.72
International 2Driver Display BR61 £80.50
International 2S Pro BR7 £215.25
International 2S-DD Pro BR7-DD £262.87
International 2S Driver Display BR71 £80.50
International 3 Pro BR8 £212.62
International 3-DD Pro BR8-DD £260.47
International 3 Driver Display BR81 £80.50
Laser 3 BR34 £247.08
RETROTRIP Historic Rallymeters
Retrotrip 2 Classique BR9C £291.03
Retrotrip 2 Mulsanne – Limited Edition BR9M £299.00
Retrotrip 3 Classique BR10C £396.00
Retrotrip Driver Display BR91C/M £73.15
Retrotrip Back-Tracker – Standard Version BR59 £77.32
Retrotrip Back-Tracker – Plug Kit Version BR59-PK £92.02
SENSORS
Speedo-Cable Sensor BR1 £29.29
Standard Wheel Sensor - 1mm BR2A £27.25
High Temperature Wheel Sensor - 1mm BR2A-HT £38.93
Wheel Sensor - 4mm BR2A-4mm £31.12
Japanese M22 Gearbox Sensor with Pinched Lug Drive BR3 £29.29
Japanese M22 Gearbox Sensor (High Grade – Dual Fitting) BR3-HG-2 £59.80
M22 Gearbox Sensor with Square Pin Drive BR3-SQ £49.05
Ford/EU M18 Gearbox Sensor with Square Pin Drive BR4 £33.02
Smith/Jaeger M12 Sensor with Square Pin Drive BRM12 £46.21
Drive/Prop Shaft Sensor BRH2 £68.97
Electronic Speedo Interface BR5 £48.07
CANBUS Sensor - Hard Wired BR56 £129.00
CANBUS Interface – Plug & Go BR57 or BR58 £129.00
CANBUS Plug Kit BR45 £25.41
CANBUS Wiring Kit BR47 £25.41
www.brantz.co.uk 42
CANBUS Contactless Reader BRCCR £54.00
Satellite Seeker BRGPS £181.50
ACCESSORIES
Timer V2 BR32V2 £151.98
Rally Timer Driver Display BR321 £58.60
Rally Timer Mounting Plate BR32BK £10.00
WP Timer - Standard WPT001 £595.83
WP Timer – Expert WPT001-E £679.17
Electronic Average Speedtable - A5 BR19-A5 £163.02
Electronic Average Speedtable - A9 BR19-A9 £152.57
Stopwatch & Clock BR42 £101.10
Power Conditioner BR21 £39.51
Plug Kit – Internationals & Retrotrips BR43 £25.41
Plug Kit – Rally Timer PLUS & Timer V2 BR43-RT £18.28
Hard Wired Remote Zero Unit BR44 £13.62
Hard Wired Remote Zero Unit – BLACK Edition BR44B £17.74
Hard Wired Foot Remote Zero Unit BR44F £16.50
Dual Zero Remote BR44DR £41.93
Wiring Kit PLUS for Laser 3 BR342 £20.15
Sensor Extension Cable (3M) BR2X £12.35
Dual Sensor Switch BR49 £26.71
Sensor Pulse Doubler BR52 £54.34
BR2A - Sensor Pulse Reducer BR5-2A £51.68
Fuse Kit BRFUSE £4.30
Sun Screen / Night Filter for Internationals BRSS7 £13.89
Sun Screen / Night Filter for Rally Timer BRSS32 £8.60
Sun Screen / Night Filter for Driver Display BRSSDD £8.60
Fokkens International Tripmeter Window Mount GFK001 £38.54
Fokkens Trip & Timer Mount GFK002 £46.63
International RAM Mount BRINT-RAM £35.00
International Window Mount BRINT-RAM-W £85.00
Retrotrip RAM Mount BR9-RAM £35.00
Retrotrip Window Mount BR9-RAM-W £85.00
12V AUX Plug 12VAUX £10.00
Brantz Ground Sheet – Black BRTARP £12.00
www.brantz.co.uk 43
Your Local Brantz Distributor is:
Right Track Enterprises Ltd t/a Brantz
34 Union Road
Macclesfield
Cheshire
SK11 7BN
UK
Tel/Fax: 0044 (0) 1625 669366
Website: www.brantz.co.uk
Email: sales@brantz.co.uk
www.brantz.co.uk 44