effectively you can heat. MULTIBETON surface heating works with ...

The quality features that are absolutely
imperative for your underfloor heating:
01. MULTIBETON system tubing is insured for 10 years 08. MULTIBETON system tubing is laid in MB steel clip
after commissioning, including against consequential tracks. These have a screed-stabilizing effect and
damages, through product liability cover of up to € 1
MILLION in individual cases. MULTIBETON can prove
guarantee a minimal screed thickness.
that no claims have ever been made against this insur- 09. MULTIBETON® system tubing is laid warm, without
ance. In addition, MULTIBETON provides a material kinks, at temperatures from +50 °C to +70 °C.
guarantee of 30 years on the pink MULTIBETON® sys- This procedure reduces tension and extends the
tem tubing.
service life (see research report no. F1668 of the
Federal Minister of Regional Planning, Building and
02. MULTIBETON® system tubing is tested and monitored
by TÜV.
Urban Development).
10. The system lies completely freely on the covered
03. MULTIBETON® system tubing has passed the maxi-test insulating layer, thus guaranteeing free expansion,
at +150 °C and 3 bar internal pressure over a service life without any acoustical or cold bridges. The system
of over 1,000 hours.
is laid to DIN/EN, i.e. without any transection of the
PE film (moisture cover) and without damaging the
04. MULTIBETON® system tubing is regularly subjected to
the most stringent quality testing during production and
insulation.
in our in-house laboratory. MULTIBETON quality re- 11. Only economical standard insulation without lamiquirements
lie well above standard specifications. nation (conforming to standards) is used in the
MULTIBETON® system in accordance with the Ger-
05. MULTIBETON® system tubing is manufactured on our
own special production lines at MULTIBETON. The raw
man Energy Saving Regulation.
material of MULTIBETON® system tubing is specially 12. After assembly, each MULTIBETON® heating circuit
tailored and produced for the manufacture of MB sys- is subjected to a safety pressure test. Thus each
tem tubing. MULTIBETON supplies heating specialists heating circuit is tested against leaks before the
directly - and not through wholesalers.
screed is laid.
06. Systems are laid according to the scientific principles of
Dr. A. Kollmar and the MULTIBETON® modulation procedure
in accordance with patents held by Kollmar/
Feist. In this way, rooms are heated in way that saves
energy and without heat build-up below the ceiling.
07. MULTIBETON systems and components are 100% recyclable
and have optimal energy efficiency.
The production machines are operated using natural
hydroelectric power, thus saving enormous quantities
of CO2.
18
13. Very good heat distribution is achieved through
MULTIBETON® modulation laying, and cosiness is
created through an even temperature across the
entire room. It promotes good health through a
pleasant room climate without the circulation of
dust caused by heating, is allergen-free and suitable
for asthmatics. It is also suitable as a "silent
cooling" underfloor system.
14. MULTIBETON® systems are compatible with all
heat sources; they are ideal for condensing boiler
technology, solar energy, heat pumps, etc.
MULTIBETON® surface heating systems have been
successfully installed in all construction areas -
indoors and outdoors, old and new builds.
15.
MULTIBETON® surface heating systems have a
wealth of experience from millions of residential
units, and practical experience extending over four
decades.
Put it all together, and you only get
MULTIBETON!