Catálogo DirtFreak 2020

Bar Rise Kit Offset 7/8 in ( 22.2 mm )
H 26 mm
KX85/100
ZE53-0526
701 ENDURO
Bar Rise Kit Offset 1 1/8 in
( 28.6 mm ) H 26 mm
BAR RISE KIT OFFSET
Dimension
ZE53-0526
ZE53-0626
20 mm
22.2 mm
26 mm
28.6 mm
* Can be used with
22.2 mm OE bar clamp
models with bar clamp
width in between 32 mm
to 36 mm.
32 mm
36 mm
* Can be used with
28.6 mm and 22.2 mm OE
bar clamp models with bar
clamp width in between
32 mm to 42 mm.
BAR RISE KIT OFF SET
- The handle position is offset 20 mm in the front and back
direction ( height 26 mm UP ).
Part # Bar Clamp
Handlebar
diameter
ZE53-0526 22.2 mm 22.2 mm
ZE53-0626
22.2 mm
28.6 mm
28.6 mm
Handlebar diameter
28.6 mm
ZE53-0626
ZE53-0626
Handlebar diameter
22.2 mm
ZE53-0526
26 mm
32 mm
42 mm
20 mm
Bar Rise Spacer 1 1/8 in ( 28.6 mm )
H 14 mm
YZ450F
ZE53-0814
ZE53-0714
BAR RISE SPACER
Dimension
14 mm
Fat bar
38 mm - 42 mm
Standard bar
32mm - 36mm
BAR RISE SPACER H : 14 mm
- Universal spacers that are used in combination with a genuine upper clamp to raise
the handle position.
- The height is 14 mm which is suitable for fine adjustment with less influence of wires.
- It can also be used for avoiding handle interference when the fork protrusion amount is
increased.
- Stainless steel M8 flange bolt 45 mm / M 8 cap bolt 40 mm corresponding to genuine upper
clamp shape depending on the model is included 4 each.
- Lineup for standard diameter bar ( 22.2 mm ) and large diameter bar ( 28.6 mm ).
Part number Size
ZE53-0714 22.2 mm
ZE53-0814 28.6 mm
23