Catálogo DirtFreak 2020

CRF250L / M / RALLY
AR1
WHEEL KIT
CRF250L/M/RALLY
- The diameter of the front and rear spoke is thickened to increase strength, and
the rear wheel delivers power to the ground efficiently by increasing the
number of spokes from 32 to 36.
Kit contents: rim / hub / Stainless spoke set / aluminum nipple set.
(These parts are not compatible with stock except bearings and seals.
XR250 / MOTARD, XR400R
CRM250R / AR
The 1990s model ,such as CRM250
R, which used a hollow rim, can be
upgraded to a U-shaped R50 rim to
offer the same level of strength and
performance as the current motocrosser.
DRZ400S / SM
Weight Front Rear
Offroad Wheel Kit 2880 g 3750 g
Motard Wheel Kit 3960 g 5080 g
For XR250MOTARD stock wheel
size Front 3.00 × 17 Rear 3.50 × 17,
AR1 motard wheel kit Front 3.50 × 17
Rear 4.50 × 17 Wide rim specification
increases tire options and supports a
wide range from touring to racing.
Weight Front Rear
Offroad Wheel Kit 2880 g 3750 g
Motard Wheel Kit 3940 g 4980 g
OFFROAD WHEEL KIT *
Bike Year Hub Rim Nipple F 1.60 x 21 inch R 2.15 x 18 inch
12-16 W21-41511 W21-51551
CRF250L/M/RALLY
17-19 W21-41521 W21-51551
CRF250L/M/RALLY ABS 17-19 W21-41521 W21-51651
MOTARD WHEEL KIT *
Bike Year Hub Rim Nipple F 3.50 x 17 inch R 4.50 17 inch
12-16 W27-11511 W27-21511
CRF250L/M/RALLY
17-19 W27-11521 W27-21511
CRF250L/M/RALLY ABS 17-19 W27-11521 W27-21651
● Black / ● Red / ● Silver The speedometer can not read correctly after changing wheel diameter.
* For the original set, stock spokes cannot be used.
AR1
WHEEL KIT
AR1
WHEEL KIT
XR250/MOTARD,XR400R,
CRM250R/AR
- The XR series stock wheel has low lateral rigidity because the spokes are
assembled differently from the MX racing models.
- The AR1 wheel kit not only in creases the lateral rigidity by feeding back the
motocrosser hub design, but also compared with the genuine hub, a weight
reduction of about 700g is acheived.
- The wire diameter is increased both at the front and rear to increase strength.
- The rear wheel increases the number of spokes from 32 to 36 so that power
can be delivered to the ground without any waste.
Kit contents: rim / hub / Stainless spoke set / aluminum nipple set.
(These parts are not compatible with stock except bearings and seals.
OFFROAD WHEEL KIT *4
Bike Year Hub Rim Nipple F 1.60 x 21 inch R 2.15 x 18 inch
XR250(MD30)
/MOTARD
95-02 - W21-51571
03-07 W21-41531 *1 W21-51571
XR400R 96-04 W21-41531 W21-51561
CRM250R/AR
89-90 - W21-51561 *3
91-96 W21-41531 W21-51561 *3
97-99 W21-41531 W21-51561
MOTARD WHEEL KIT *4
Bike Year Hub Rim Nipple F 3.50 x 17 inch R 4.50 17 inch
XR250(MD30)
/MOTARD
95-02 - W27-21541
03-07 W27-11531 *2 W27-21541
XR400R 96-04 W27-11531 *2 W27-21531
CRM250R/AR
● Black / ● Red / ● Silver
89-90 - W27-21531 *3
91-96 W27-11531 W27-21531 *3
97-99 W27-11531 W27-21531
*1 When attached to XR250MOTARD, the speedometer cannot measure correctly.
Replacement for the stock meter gear for XR250 (MD30) is required.
*2 When attached to XR250 (MD30), CRM250R / AR, XR400R, the speedometer cannot measure correctly.
Replacement for the stock meter gear for XR250MOTARD is required
*3 Sprocket mounting hole is Φ8. The stock is Φ10. Please use the stock rear sprockets, bolts, nuts, etc
produced in ‘97- .
*4 For the original set, stock spokes cannot be used.
DRZ400S/SM
- Since high-strength aluminum is CNC machined, it is stronger and lighter than stock cast hub.
- 2004 and newer model provides lighter, more direct feeling by the hub damper exclude in design.
Kit contents: rim / hub / Stainless spoke set / aluminum nipple set.
(These parts are not compatible with stock except bearings and seals.
DISK
STICKER
Weight Front Rear
Offroad Wheel Kit 2920 g 3840 g
Motard Wheel Kit 3940 g 5140 g
Bike
Year
DRZ400S/SM 00-17
Titanium-color / Black / Silver
OFFROAD WHEEL KIT *4
Hub Rim Nipple F 1.60 x 21 inch R 2.15 x 18 inch
W21-45511 *1 W21-55551 *3
MOTARD WHEEL KIT *4
Hub Rim Nipple F 3.50 x 17 inch R 4.50 17 inch
W27-15511 *2 W27-25511 *3
*1 When instlling to SM, the speedometer will not read correctly.
*2 For S the stock meter gear will require replacing.
*3 Hub damper is not supported. When mounting on a bike with stock hub damper, the rear sprocket
and sprocket side spacer need to be replaced for up to 2003 DRZ400S.
*4 For the original set, stock spokes cannot be used.
KLX250 / D-TRACKER
Weight Front Rear
Offroad Wheel Kit 2895 g 3660 g
Motard Wheel Kit 3920 g 4920 g
AR1
WHEEL KIT
KLX250/D-TRACKER/X
- The AR1 motard wheel kit has a wide rim specification of 3.50x17 rear 4.50x17
for the stock front 3.00x17 rear 4.00x17 of the D-TRACKER / X, so it can be
used for a wide range, from touring to racing.
Kit contents: rim / hub / Stainless spoke set / aluminum nipple set.
(These parts are not compatible with stock except bearings and seals.
OFFROAD WHEEL KIT
Bike Year Hub Rim Nipple F 1.60 x 21 inch R 2.15 x 18 inch
KLX250 * 98-20 W21-43511 W21-53551
D-TRACKER/X * 98-16 W21-43511 W21-53551
MOTARD WHEEL KIT
Bike Year Hub Rim Nipple F 3.50 x 17 inch R 4.50 17 inch
KLX250 98-20 W27-13511 W27-23511
D-TRACKER/X * 98-16 W27-13511 W27-23511
Titanium-color / Black / Silver
* For the original set, stock spokes cannot be used.
69