17.06.2020 Views

Produktkatalog 2020-ED2

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RF over Fiber

System Components

10 MHz Reference Oscillator

The SMW Outdoors proof 10 MHz Reference Oscillator provides

up to ±30 ppb LO stability and low phase noise.

The output connectors can be ordered as SMA, N or F.

Full technical specification in RF & Accessories section.

10 MHz Recovery Oscillator

The SMW Outdoors proof 10 MHz Recovery oscillator cleans

up 10 MHz Reference Phase Noise and provides ±30 ppb LO

stability.

The connectors can be ordered as SMA, N or F.

Full technical specification in RF & Accessories section.

Dual DC Inserter

Our Dual DC Inserter couples supplied DC power to coax outputs for

a convenient way to power the fiber LNBs. It is delivered as standard

with 30 meter DC cable which is the max. recommended length to

avoid problems caused by voltage drop over the DC cable.

The output connectors for DC feed to the LNBs can be ordered as

SMA, N or F corresponding to your choice of DC input connectors on

the Fiber LNBs.

Full technical specification in RF & Accessories section.

Cleaning Tool

Cleaning of Fiberoptic ends is essential to maintain trouble-free

operation and full specification of RF over Fiber systems.

The IBC Fiber Connector Cleaning Tool or ”Click pen” is used to

clean Fiberoptic ends in Q-ODCS connectors due to their depth.

It is highly recommended and stocked by SMW.

Power supply

The TDK-Lambda PSU is a AC/DC PSU series recommended for SMW

RF over Fiber products and stocked. Tested with Fiber LNBs together

with the Dual DC Inserter and also with Quattro Rx Receiver, Versa-

Link, LNB-Link and Quad-Link RF-over-Fiber systems.

As standard it’s made for mounting indoors on a DIN rail.

Full technical specification in RF & Accessories section.

For an Outdoor PSU, please contact us.

48

Rev.04-20-2B

Above parameters are generic product family values. For part number specific min./max. values, please consult us.

Specifications are subject to change without notice. Products from Swedish Microwave AB are made for commercial use.

Swedish Microwave AB, Dynamov. 5, S-591 61 Motala, Sweden. Tel: +46 141 216135, sales@smw.se, www.smw.se

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!