Produktkatalog 2020-ED2

More documents

Recommendations

Info

L Band10 MHz ReferenceOscillator with Diplexer10 MHz Referenceoscillator with veryLow Phase NoiseThe 10 MHz Reference oscillator is used for controlof the local oscillator in LNBs or BUCs when a veryhigh LO stability and very low phase noise is needed.The SMW 10 MHz Ref. oscillator gives a LO stabilityof ±20 ppb = ±20 x 10E-9 ( ppb=parts per billion).Very Low power consumption OCXO.TECHNICAL SPECIFICATIONSMODEL:LREF - 10 MHz Reference OscillatorL-Band Frequency RangeDC InputMaximum LoadIF Insertion LossReturn Loss 10 MHz InputReturn Loss 10 MHz OutputReturn Loss L-band Input / Output950 - 2150 MHz+10 to +28 V800 mA @ DC output1 dB @ 950 - 2150 MHz max.> 20 dB> 20 dBN- and SMA-connector: min. 10dB, typ. 15 dB, with F connector min. 8dB, typ. 13 dB10 MHz Harmonic Suppression > 70 dBc (L-Band output), > 40 dBc (separate 10 MHz output)Temperature Range-40 to +80°CProtection Class IP 67ConnectorsF-type 75Ω / N-type 50Ω / SMA-type 50Ω22 kHz Bypass (standard) Through receiver or external source, n/a with DC Block IN or OUTOutput FrequencyOutput Level10 MHz, Sinewave+7 dBm ±1 dBFrequency Stability ±20 ppb @ 0 to +50°C , ±50 ppb @ -40 to +85°CCalibration Tolerance ±10 ppb @ 25°CAgingPhase Noise±500 ppb max. @ 10 years-90 dBc @ 1 Hz, -120 dBc @ 10 Hz, -142 dBc @ 100 Hz, -155 dBc @ 1 kHz, -163 dBc @ 10 kHz (max. values)Current Consumption 100 mA warm up 1 min. , 35 mA steady state typ.DimensionsWeightOptions96 x 28 x 89 mm ( N-connectors ), for drawing, see www.smw.se208 g (F & SMA), 250 g (N)2nd 10 MHz output SMA connector ( +6 dBm output level / output ), Separate DC input with connector orpigtail (DC cable) and DC disabled on Receiver port, Factory calibrationRev.04-20-3C50Above parameters are generic product family values. For part number specific min./max. values, please consult us.Specifications are subject to change without notice. Products from Swedish Microwave AB are made for commercial use.Swedish Microwave AB, Dynamov. 5, S-591 61 Motala, Sweden. Tel: +46 141 216135, sales@smw.se, www.smw.se
L Band10 MHz ref. oscillatorexamplesRev.04-20-2CAbove parameters are generic product family values. For part number specific min./max. values, please consult us.Specifications are subject to change without notice. Products from Swedish Microwave AB are made for commercial use.Swedish Microwave AB, Dynamov. 5, S-591 61 Motala, Sweden. Tel: +46 141 216135, sales@smw.se, www.smw.se 51
Page 1 and 2: PRODUCT RANGE2020 EDITION2Over 30 Y
Page 3 and 4: • ContentC-BandSingle band LNB. .
Page 5 and 6: C BandPLL BDC 3.40-4.80 GHz3.40-4.8
Page 7 and 8: Ku X BandPLL LNB Satcom & TLTProfes
Page 9 and 10: Ku X BandPLL BDC 7.25 - 7.75 GHz7.2
Page 11 and 12: Ku Band9-10 GHz PLL LNBSingle 9-10
Page 13 and 14: Ku BandWideband PLL LNBWideband, ex
Page 15 and 16: Ku BandQuattro WDL PLL LNB2x Dual p
Page 17 and 18: Ku Bandcont. Multiband PLL LNBType
Page 19 and 20: Ku BandSingle band PLL BDCSingle ba
Page 21 and 22: Ku Bandcont. Multiband PLL BDCType
Page 23 and 24: Ku BandDual PLL BDCDual BDC (Block
Page 25 and 26: Ka BandLNALNA 17.30 - 22.30 GHz(Low
Page 27 and 28: Ka BandMultiband PLL LNB2 to 8-Band
Page 29 and 30: Ka Band2-Band PLL LNBTECHNICAL SPEC
Page 31 and 32: Ka BandWideband PLL BDCWideband, ex
Page 33 and 34: Ka BandMultiband PLL BDC2 to 8-Band
Page 35 and 36: Ka BandIntegrated Triple PLL System
Page 37 and 38: Ka BandTriple PLL System cont.Examp
Page 39 and 40: Ka BandQuad PLL System cont.Example
Page 41 and 42: RF over FiberFiber output LNBsoptic
Page 43 and 44: RF over FiberVersa-Link SystemFeatu
Page 45 and 46: RF over FiberFiber optic LNB-LinkHi
Page 47 and 48: RF over FiberQuad-Link SystemHigh R
Page 49: RF over FiberDual DC InserterDual D
Page 53 and 54: L Band10 MHz RecoveryOscillator/DC
Page 55 and 56: L Band10 MHz DiplexerThe L-Band 10
Page 57 and 58: L BandGain adjustableLine Amplifier
Page 59 and 60: L BandDC Power SupplyPower supply f
Page 61 and 62: RF & AccessoriesOMT / DepolarizerKu
Page 63 and 64: 63
Page 65 and 66: GlossaryMEO The most common use for

Produktkatalog 2020-ED2

Create successful ePaper yourself

Delete template?

Save as template?