RoadMate 9412T-LM User Manual

2 Fundamentals
Battery Levels
The Magellan RoadMate receiver has an
internal battery that is charging whenever the
receiver is connected to external power 1 .
2. Tap the speaker button to mute the
volume, or tap the ‘+’ or ‘-’ buttons to
raise or lower the volume.
Note: The battery can only be serviced by
authorized Magellan repair facilities.
Viewing the Battery Level Indicator
1. While viewing the Map screen, tap on
the Menu button in the right corner.
2. The battery level indicator is located in
the upper right corner of the Main Menu,
just below the satellite signal indicator.
Green bars indicate battery level.
Speaker Volume
Changing the Volume from the Map
Screen
1. Tap the speaker icon . Additional
controls appear.
1 When the device is very cold or very hot, the battery will
not charge.
3. Tap .
Changing the Volume from Settings
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Sound.
4. Tap the top or bottom of the Master
volume adjust bar or drag the slider
button to change the volume level of the
Magellan RoadMate receiver.
5. Tap to save and return to the
Settings screen.
Setting Button Sounds On or Off
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Sound.
4. Tap the check box for Button Sounds.
Check to have button sounds played,
unchecked to turn them off.
Setting Smart Volume On or Off
Smart Volume is a feature of the receiver that
changes the volume automatically as your
speed changes, compensating for road noise.
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Sound.
4. Tap the check box for Smart Volume.
When checked, Smart Volume is on.
9400-series User Manual Page 3