spc-4800-donning-po-9106556-en-master
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Suiting up<br />
Dräger SPC <strong>4800</strong><br />
91 06 556 | 18.11-1 | HQ | PP | Änderung<strong>en</strong> vorbehalt<strong>en</strong> | © 2018 Drägerwerk AG & Co. KGaA<br />
D-5176-2018<br />
D-5232-2018<br />
Op<strong>en</strong> the protective suit and prepare<br />
it for <strong>donning</strong>.<br />
D-5191-2018<br />
D-5260-2018<br />
Without shoes on, step through<br />
the op<strong>en</strong> zipper on the back, first<br />
into the right trouser leg and th<strong>en</strong><br />
into the left trouser leg.<br />
Pull up the leg cuff and step into<br />
the boot with the sock on.<br />
Guide your arms into the sleeves<br />
and gloves. If necessary, you can<br />
wear cotton gloves as undergloves.<br />
Position the facial cuff over the<br />
mask. Avoid creating any wrinkles<br />
betwe<strong>en</strong> the mask and cuff.<br />
Guide your arms into the sleeves<br />
and gloves. If necessary, you can<br />
wear cotton gloves as undergloves.<br />
Slip the hood over your head.<br />
Position the facial cuff on your<br />
face below your chin to <strong>en</strong>sure an<br />
optimally sealed fit.<br />
Position the half-tight<strong>en</strong>ed mask<br />
on the facial cuff and pull the cuff<br />
slightly towards the back. Smooth<br />
out any wrinkles in the hood.<br />
Ev<strong>en</strong>ly pull the straps of the mask towards<br />
the back. The sealing lip of the<br />
mask must rest on the facial cuff, not<br />
on the suit material or seam.<br />
D-5282-2018<br />
D-5216-2018 / D-5220-2018<br />
D-5152-2014<br />
D-3208 / ST-715-2006<br />
D-5245-2018<br />
D-5257-2018<br />
D-5306-2018<br />
D-5320-2018<br />
D-10032-2010<br />
Option 1: Facial cuff over the<br />
full-face mask<br />
1<br />
4<br />
a2<br />
2<br />
4<br />
a3<br />
D-5231-2018<br />
D-5273-2018<br />
3<br />
4<br />
a4<br />
D-5258-2016<br />
D-5232-2018<br />
4<br />
Put on the mask and pull the straps<br />
ev<strong>en</strong>ly towards the back.<br />
4<br />
a1<br />
b1<br />
Option 2: Facial cuff under<br />
the full-face mask<br />
Slip the hood over the full-face<br />
mask.<br />
4<br />
b2<br />
4<br />
b3<br />
4<br />
b4<br />
4<br />
b5<br />
5<br />
6<br />
7<br />
8<br />
Have a second person close the<br />
zipper.<br />
Fast<strong>en</strong> the snaps first and th<strong>en</strong> the<br />
covering flap. Ensure that the hook<br />
and loop fast<strong>en</strong>er is properly aligned.<br />
If necessary, you can use over<br />
gloves. Pull the sleeve cuffs over<br />
them.<br />
Attach the compressed air breathing<br />
apparatus and/or connect an<br />
external breathing air supply.<br />
Dräger recomm<strong>en</strong>ds putting on the protective suit with the help of a second person.<br />
Before using the Dräger SPC <strong>4800</strong>, always carefully read and understand the instructions for use.<br />
www.draeger.com
Change language