Curtain Tracks - Flint Hire & Supply
Curtain Tracks - Flint Hire & Supply
Curtain Tracks - Flint Hire & Supply
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.48<br />
SECTION TWO<br />
CURTAIN TRACKS<br />
<strong>Flint</strong>s supply a wide range of tracks ideally suited for<br />
use in the entertainments industry.<br />
Tab Track Terminology<br />
At first glance a tab track may appear complicated but all the components<br />
from each manufacturer have basically the same functions. We<br />
have described them below to help you choose but if you prefer just<br />
phone us and we will calculate your component needs.<br />
Bobbins or Runners These run along the track normally on small<br />
wheels and carry the drapes. Generally they are spaced at around 250-<br />
300mm apart.<br />
Rearfold Runners Runners with an attachment that grips the control<br />
line [until offstage] to enable a cloth to move off stage without gathering<br />
from the leading edge. Only normally used with painted cloths.<br />
Master Runners The master runner is the lead runner. It will normally<br />
have a clamping plate to grip the control cord. For a centre<br />
opening track you will need two master runners. Clamp the handline to<br />
one runner, then thread it around the return pulley at the end of the<br />
track and clamp the returning part of the cord to the other master runner.<br />
Even if the drapes are just to be pulled along it is wise to have a<br />
master runner at the leading edges as this runner will take a greater<br />
strain than ordinary bobbins.<br />
Overlap Arms Some master runners will take an overlap arm<br />
which allows centre opening drapes to overlap. The alternative is to<br />
overlap the tracks but to do this you will need overlap clips plus offset<br />
plates to ensure the hook clamps align with the flying bar.<br />
Head Pulley This double sheave vertical pulley bolts to the operator<br />
end of the track. Sometimes two designs are available, one for<br />
overlap tracks and one for single tracks.<br />
Return Pulley Horizontal pulley bolted to the far end of the track.<br />
Floor Pulley These pulleys are fixed to the floor and the sheave<br />
can be adjusted to put tension in the cord. If your track needs to fly<br />
out then choose a foot stirrup pulley or a weighted pulley. If you<br />
choose a weighted pulley ensure that you use a polyester handline and<br />
that regular checks are made to guard against chafe.<br />
Handline <strong>Tracks</strong> take 6 or 8mm diameter handlines. Nowadays most<br />
people choose matt black polyester line rather than jute sash. If you<br />
are using a weighted pulley do not use jute sash. For the track to operate<br />
the line needs to be tied [or clamped] to form a loop. The best<br />
place to do this is just behind a master carrier rope clamp as this position<br />
never has to pass through a pulley.<br />
How to Cord Up a Tab Track<br />
Ideally position the assembled track at a comfortable working height.<br />
The cording principle is based on a long loop of cord, the loop being<br />
formed by clamping both the ends onto the “Cord End Master Carrier”.<br />
If the track is centre opening then the other “slave” master carrier<br />
will also be clamped to the returning cord. To cord a typical centre<br />
opening track, position the master carriers in the “Tabs Closed” position<br />
[centre stage]. Loosely tie or clamp one end of the cord onto the<br />
“Cord End Master Carrier” and thread the cord around the horizontal<br />
return pulley then back along the track passing through the rope<br />
clamp on the “slave master carrier”. Loosely tighten the clamp plate<br />
and continue with the cord to the header pulley. Take it over the header<br />
pulley, around the foot stirrup or floor mounted pulley and back<br />
over the other sheave on the header pulley and finally back to the<br />
“Cord End Master Carrier”. Ensure you have the correct drop for the<br />
floor mounted pulley and then loosely clamp the rope in place. Don’t<br />
chop off the excess just yet! Take the track to its operational position.<br />
Try the track to ensure it is corded correctly then tighten the rope<br />
clamps and cut off the excess cord. [Based loosely on an extract from<br />
the Unitrack Manual].<br />
LIGHTWEIGHT TRACKS<br />
This page was updated 1911/12<br />
Unitab System This smart black<br />
extruded aluminium track is designed to<br />
be the equivalent of a heavy duty<br />
domestic track but with the reliability,<br />
performance and ease of installation<br />
that is expected of Triple E products.<br />
Recommended for small venues, pubs<br />
and clubs. Note the excellent SWL of the<br />
runners which should exceed virtually<br />
every requirement. This track is not sold as a corded system so the<br />
curtains are pulled manually. [However the master carrier is fitted with a cord<br />
clamp so the ingenious among you could purchase some 4mm cord and some size 1<br />
yacht blocks and make a serviceable system - see below]. The track is generally<br />
screwed to a timber batten and it has a clever vee groove in the<br />
top flanges to neatly position your drill bit making the task quick<br />
and easy. Choose your type of screw carefully as there isn’t an<br />
abundance of clearance between the bobbins and the underside of<br />
the flange. Curved tracks can be made to order down to a radius of<br />
500mm. Transport costs on curved tracks need to be individually<br />
quoted.<br />
Phone<br />
4 Small neat black profile.<br />
4 Simple smooth running system.<br />
for a <strong>Flint</strong>s track<br />
4 Can be supplied as curved track.<br />
catalogue 4 Ideal for clubs, hotels, and restaurants.<br />
4 Good choice for studio/classroom blackout curtains.<br />
4 Excellent for drapes fitted to scenery.<br />
8 Not really suitable for touring [unless fixed to scenery].<br />
8 Not normally supplied corded [but see below ].<br />
Unitab System code price<br />
Straight Track up to 3m long EEETAB01 per m £21.00<br />
Curved Track EEETAB01C per m £29.00<br />
Joint Pins EEETAB05 £0.10<br />
Standard Runner [SWL 10kg Space at 250mm] EEETAB06 £9.00<br />
Master Runner [with cord clamp] EEETAB07 £35.00<br />
End Stop and <strong>Curtain</strong> Anchor EEETAB24 £6.50<br />
S Hooks [for use with ruflette tapes] EEETAB29 £1.25<br />
Cording<br />
Unitab<br />
Although Unitab is<br />
not supplied as a corded system it is easy to<br />
adapt by using a Barton Cheek block as the<br />
return pulley [BARCH2] and a double Barton<br />
upright block [BAR01250] as the header<br />
pulley [see page 2.41]. A Barton single pulley lashed to a screw eye<br />
can substitute as an economical adjustable floor pulley.<br />
<strong>Flint</strong>s can provide advice and competitive<br />
quotations for supplying drapes as well! We<br />
can also quote for installing and maintaining<br />
tracks in the London area.<br />
<strong>Flint</strong> <strong>Hire</strong> & <strong>Supply</strong> Ltd., Queens Row, London SE17 2PX tel 020 7703 9786 fax 020 7708 4189 flints.co.uk<br />
à
This page was updated 18/06/12<br />
new<br />
Simple<br />
good looks<br />
2way This new track from Triple E is similar in design to their<br />
3way track [see page 2.51]. Designed for lightweight curtains it can<br />
be used instead of domestic tracking to provide the kind of reliable<br />
service expected from Triple E products. The track is available in<br />
lengths up to 6.1m [20ft] and can be provided pre-rolled for curved<br />
installations. The track is quickly joined with a steel plate and grub<br />
screws locating in the top slot while two roll pins provide alignment<br />
of the running surfaces. 2way has a continuous suspension slot<br />
along the top to take Triple E fittings, or it can be screwed directly<br />
to a soffit by using ceiling clips. The runners are designed to take<br />
ties or Twin Hooks but Steel Wire Hooks are also available for use<br />
with rufflette tapes. This track is not available as a corded version.<br />
Track with insert nut Hook Clamp Master Runner and Standard<br />
Runner<br />
Joint detail<br />
4 Smart good looks. 4 Ideal for pubs,<br />
clubs and small performance venues.<br />
4 Good choice for cycloramas in small<br />
photographic, TV and drama studios.<br />
4 Use it for “on scenery” drapes.<br />
7 Not available corded. 7 Not suitable for touring.<br />
2way System code price<br />
Straight Track up to 3m long Black EEE2W01B per m £17.00<br />
Straight Track up to 3m long Silver EEE2W01S per m £15.00<br />
Curved Track 90° Section 750mm rad Blk EEE2W01B75090 £44.00<br />
Curved Track 90° Section 750mm rad Slv EEE2W01S75090 £42.00<br />
Curved Track 90° Section 1m rad Black EEE2W01B100090 £47.00<br />
Curved Track 90° Section 1m rad Silver EEE2W01S100090 £45.00<br />
Curved Track to order Black EEE2W01BC per m £29.00<br />
Curved Track to order Silver EEE2W01SC per m £POA<br />
Joint Plate with two pins EEE2W05 £8.50<br />
Standard Runner [space at 250mm] EEE3W06P £3.00<br />
Ball Raced Runner [space at 250mm] EEE3W06C £6.00<br />
Master Runner [no cord clamp] EEE3W07W £24.00<br />
Channel Nuts EEEM8ERAILNUT £0.75<br />
Hook Clamp [black] EEE3W14B £6.25<br />
Hook Clamp [silver] EEE3W14S £6.50<br />
Ceiling Mount Clamps [5 pairs] EEE3W30 £8.00<br />
Wall Bracket EEETRA16 £17.00<br />
Studding Set c/w nuts washers[M8x150mm] EEEERL18 £6.00<br />
End Stop EEE3W24 £6.25<br />
Wire S Hooks [for use with ruflette tapes] EEE2W29 £1.25<br />
Although many of the tracks are available<br />
in stock in 1,2 or 3m lengths which can be<br />
dispatched on overnight couriers, lengths<br />
of up to 6.1m can be ordered for special<br />
circumstances but will be subject to<br />
POA transport costs.<br />
MEDIUM DUTY TRACKS<br />
Halls T60 Anglia<br />
Track Designed to meet<br />
the requirements of most<br />
small and medium sized<br />
stages and television and<br />
video facilities with cycloramas.<br />
<strong>Curtain</strong>s can be<br />
hand pulled, electrically or<br />
hand winched or just<br />
walked along. The maximum recommended length for a single wipe<br />
track is 9m or 18m for an overlapped track. Single tracks can be easily<br />
suspended from bars by using the T60 universal fittings bolted to Hook<br />
Clamps [see page 3.58]. Overlap tracks should use the “Z” brackets to<br />
centre the track on the bar. The tracks can be supplied in 45 degree and<br />
90 degree curved sections. Please phone for a complete list of components<br />
and prices.<br />
4 Often installed in school stages. 4 Old design so tried and tested.<br />
4 Economically priced.<br />
8 Slightly fiddly joint bolts. 8 Old design may not suit modern stages.<br />
Head Pulley Return Pulley<br />
Wheeled Runner<br />
Overlap Clip<br />
Floor Fixing Pulley<br />
Master Carrier<br />
T60 Universal Fitting Stud Hanger<br />
Z Tube to overlap Face Fixing Bracket Deadline Suspension End Stop<br />
Halls T60 Anglia Track code price<br />
Straight Track 500mm section HALT60576 £25.90<br />
Straight Track 1 m section HALT60580 £33.99<br />
Straight Track 2 m section HALT60584 £56.63<br />
Straight Track 3m section [max] HALT60586 £75.34<br />
[other lengths and curved sections available, please phone for details]<br />
Joint Bolts (per 10) HALT63756 £13.90<br />
[2 shouldered+2 hex sets, nuts, washers, - enough for one joint.]<br />
Head Pulley [handline] HALT61188 £32.80<br />
Return Pulley [handline] HALT61187 £21.63<br />
Floor Fixing Pulley [handline] HALT61182 £44.77<br />
Master Carrier (per 2) HALT63750 £32.61<br />
Wheeled Runner (per 10) [SWL 4kg. Space 300mm] HALT62132 £22.82<br />
Ball Raced Runner (per 10) HALT60542 £41.51<br />
Overlap Clip [per 2] HALT63291 £14.42<br />
T60 Universal Fitting [per 2] HALT63753 £16.01<br />
Stud Hanger to 48mm Ø [per 2] HALT63136 £27.45<br />
“Z” Tube 48mm to overlap track HALT610965 £21.43<br />
Face Fixing Bracket [per pair] HALT61181 £21.57<br />
Deadline Suspension fitting (per 2) HALT60963 £15.70<br />
Tab Hook (per 10) [for pic. see page 2.53] HAL3578 £7.88<br />
Twin Hook (per 10) [for pic. see page 2.53] HAL1701 £7.88<br />
Endstop (per 2) HALT65730 £12.16<br />
Black 6mm x 8 plait polyester handline ROP120 per m £0.85<br />
T60 Carriers Ballraced for Scenery Flat HALT64348 £88.83<br />
<strong>Flint</strong> <strong>Hire</strong> & <strong>Supply</strong> Ltd., Queens Row, London SE17 2PX tel 020 7703 9786 fax 020 7708 4189 flints.co.uk<br />
2.49<br />
SECTION TWO
2.50<br />
SECTION TWO<br />
new<br />
This page was updated 22/11/12<br />
Erail Erail is a significantly improved version of the previous<br />
Unirail system. The track is a tough one piece black aluminium<br />
extrusion available in lengths up to 3m [9ft]. Joins are made with<br />
a steel plate and grub screw in the top slot with a single roll pin in<br />
the base to ensure smooth running surfaces. The track can be<br />
rolled down to a 500mm radius. Erail can be mounted by means<br />
of special 8mm channel nuts in the top slot allowing easy connection<br />
to a hook clamp or 8mm studding. Low friction ball<br />
raced nylon runners ensure easy handling of the drapes.<br />
Centre opening drapes can be overlapped by using overlap<br />
arms on the master carriers. The track can also be corded for<br />
manual use or, by using the Tracdrive in place of the floor pulley, it<br />
can be motorised. 4 Virtually silent operation 4 Ideal for small<br />
stages such as on cruise ships, conference centres, hotels and<br />
school halls 4 Can be ordered to special radiuses with fast delivery<br />
times 4 Sleek modern appearance 4 Lower profile than most<br />
tracks 4 Economically priced 8 Suitable for all but the very heaviest<br />
of stage curtains 8 No scenery carriers or rearfold runners<br />
available 8 Care should be taken when touring to protect long<br />
lengths from bending and edge damage.<br />
Joint plate Master runner and standard<br />
runner<br />
Hook clamp<br />
Erail System code price<br />
Erail Track Straight [up to 3m] EEEERL01 per m £21.00<br />
Erail Track Curved EEEERL01C per m £33.00<br />
Joint Plate complete with roll pin EEEERL05 £8.50<br />
2 Wheeled Runner EEEERL06 £6.75<br />
Master Runner EEEERL07 £40.00<br />
Master Runner with rope clamp [straight] EEEERL07S £50.00<br />
Master Runner with rope clamp [curved] EEEERL20 £57.00<br />
Overlap Arm EEEERL07A £10.50<br />
Head Pulley EEEERL09 £52.00<br />
Return Pulley EEEERL10 £45.00<br />
Foot Stirrup Pulley EEETRA11 £33.00<br />
Adjustable Floor Pulley EEETRA12 £42.50<br />
Girder Clamp EEETRA13 £28.00<br />
Hook Clamp for 50mm tube/truss EEEERL14 £7.00<br />
Deadline Fixing EEETRA15 £6.00<br />
Wall Bracket EEETRA16 £17.00<br />
Mounting Bracket EEEERL17 £8.00<br />
M8 Attachment Nut EEEM8ERAILNUT £0.85<br />
Studding set M8x150 for use with ERL17 or ERL23] EEETRA18 £6.00<br />
Studding set M8x150 direct to track] EEEERL18 £6.50<br />
Curved Cord Guide EEEERL19 £21.00<br />
Head Pulley Cord Guide EEEERL21 £26.50<br />
Curved Track Suspension Bracket EEEERL23 £13.00<br />
Line Pick Up EEEERL25 £8.00<br />
Overlap Clip EEEERL26 £9.00<br />
Erail Endstop EEEERL24 £8.00<br />
8mm x 8 plait polyester handline ROP122A per m £1.06<br />
Trac Drive [motorised contol system] TRADB1 £2,950.00<br />
Remote Pendant [for Trac Drive Controller] TRADP1 £125.00<br />
We<br />
can work out<br />
your component list<br />
for you! Just phone us<br />
and we will do the<br />
rest.<br />
Doughty Six Track<br />
This track has been developed as competition to the Halls T60<br />
track. It is remarkably similar but Six Track has a couple of clever<br />
features which should prove popular. The barrel brackets allow<br />
overlap tracks to hang centrally on the flying bar, and a bolt-on<br />
end plate enables the track to be cut to exact lengths without<br />
the need for onsite welding. [although Halls now make one of<br />
these as well, oh the joys of competition!].<br />
4 Ideal for schools and colleges. 4 Economically priced.<br />
4 Versatile modular system. 8 A bit fiddly for tours.<br />
Head Pulley Return Pulley<br />
Wheeled Runner<br />
Overlap Clip<br />
Floor Fixing Pulley<br />
End Stop Barrel Bracket for Adjustable support<br />
overlap track<br />
bracket<br />
Master Carrier<br />
Weighted Pulley Floor fixing pulley<br />
Short support<br />
bracket<br />
Doughty Six Track code price<br />
Straight track 500mm section DOUT63706 £23.67<br />
Straight track 1m section DOUT63708 £34.18<br />
Straight track 2m section DOUT63710 £59.16<br />
Straight track 3m section [max] DOUT63715 £84.16<br />
Curved track 90° 500mm radius DOUT63730 £68.38<br />
Curved track 90° 750mm radius DOUT63731 £78.89<br />
Curved track 90° 1m radius DOUT63732 £94.67<br />
Wheeled runner - ballraced [use every 300mm] DOUT63756 £4.51<br />
Master runner DOUT63755 £18.78<br />
Twin Head pulley DOUT63776 £35.50<br />
Return pulley DOUT63775 £21.69<br />
Weighted handline pulley DOUT63820 £35.21<br />
Floor fixing handline pulley DOUT63825 £43.34<br />
Overlap bracket DOUT63752 £6.44<br />
Line support [every 2.5m] DOUT63770 £27.61<br />
Bolt on end plate (if cutting track) DOUT63765 £11.18<br />
End stop [for walk along system] DOUT63760 £5.92<br />
Barrel bracket for overlap track DOUT63753 £11.52<br />
Adjustable support bracket [takes 10mm studding] DOUT63750 £5.92<br />
Short support bracket DOUT63751 £5.59<br />
Handline 8mm x 8 plait polyester [per metre] ROP122A £1.06<br />
Fixing Kit for Six Track [100 bolts nut and washers] DOUT63795 £7.52<br />
Sixtrack Spigot Plate DOUT63748 £2.24<br />
<strong>Flint</strong> <strong>Hire</strong> & <strong>Supply</strong> Ltd., Queens Row, London SE17 2PX tel 020 7703 9786 fax 020 7708 4189 flints.co.uk
Triple E 3Way<br />
Track This track is aimed<br />
at venues with restricted<br />
budgets but with a requirement<br />
for a robust medium<br />
duty track which is simple<br />
to install and operate. The<br />
economical pricing of the<br />
track has been achieved by<br />
reducing the number of components needed. The rope is guided within<br />
the track which measures 68x44mm. On curved tracks this is a<br />
huge advantage as all the guide pulleys have been eliminated. The<br />
top channel in the track accepts standard Unistrut channel nuts,<br />
while the side channels take the joint bars and are used for fixing the<br />
head and return pulleys. Support the track at least every 3m plus<br />
additional support in the stacking area. Available in aluminium or<br />
black anodised.<br />
Walkalong End Stop<br />
Side Head Pulley<br />
This page was updated 30/09/11<br />
Overlap Assembly Head Pulley Return Pulley<br />
Weighted Pulley<br />
Overlap Arm Wipe Arm<br />
Master Runner Walkalong Master Carrier Corded Hook Clamp Plain wheel runner<br />
Track silver code price black code price<br />
3way Track per m EEE3W01S £17.00 EEE3W01B £27.00<br />
Curved 3way Track per m EEE3W01SC £POA EEE3W01BC £POA<br />
Walkalong Endstop EEE3W24S £6.50 EEE3W24B £6.50<br />
Joint Sets EEE3W05 £13.00<br />
Pulleys silver code price black code price<br />
Centre Overlap AssemblyEEE3W26S £145.00 EEE3W26B £165.00<br />
Head Pulley EEE3W09S £61.00 EEE3W09B £63.00<br />
Return Pulley EEE3W10S £40.00 EEE3W10B £43.00<br />
Side Head Pulley EEE3W09SS £73.00 EEE3W09SB £75.00<br />
Weighted Pulley EEE3W11 £30.50 -------- -------<br />
Arms silver code price black code price<br />
Overlap Arm EEE3W07AS £10.00 EEE3W07AB £12.00<br />
Wipe Arm EEE3W07WS £8.50 EEE3W07WB £8.50<br />
Carriers code price<br />
Plain Wheel Runner EEE3W06P £3.25<br />
Ball Raced Wheel Runner EEE3W06C £5.50<br />
Tyred Runner with Central Bearing EEE3W06B £3.25<br />
Master Runner for Walkalong <strong>Tracks</strong> EEE3W07W £23.00<br />
Master Runner for Corded <strong>Tracks</strong> EEE3W07R £43.00<br />
Suspension Parts silver code price code price<br />
Channel Nut M8 EEE3WCN8 £1.00<br />
Hook Clamp EEE3W14S £6.25 EEE3W14B £6.50<br />
Ceiling Mount Clips (5 pairs) EEE3W30 £8.50<br />
Girder Clamp EEETRA13 £26.00<br />
Wall Bracket EEETRA16 £19.00<br />
Studding Set M8 (150mm C/W nuts and washers) EEE3W18 £6.50<br />
Handline code per m<br />
Cord ROP122A £1.06<br />
HEAVY DUTY TRACKS<br />
Triple E Unitrack Our<br />
biggest selling track and the track<br />
that we choose for our own hire<br />
stock. Unitrack is a versatile track<br />
system, used widely for theatres,<br />
exhibitions, trade shows and rock<br />
and roll tours. Modular sections<br />
are available in standard lengths<br />
of 2m, 1m, 500mm and 250mm. The design is such that the track<br />
sections stack neatly on trucks or in storage making this system the<br />
preferred choice for tours. Special curved sections are available to<br />
order and there are at least 16 ways of cording the track, with the<br />
option to add drive motors. A range of suspension fittings is available.<br />
Runners should generally be spaced at 300mm intervals.<br />
Standard and curved runners have Safe Working Load of 25kg, whilst<br />
master runners and scenery carriers have a SWL of 50kg. Heavy Duty<br />
Carriers have a SWL of 100kg.<br />
4 Industry favourite. 4 Well proven.<br />
4 Stacks very neatly for storage. 4 Ideal for touring.<br />
4 Takes scenery carriers including heavy duty versions.<br />
4 Just one bolt to join lengths. 4 Huge range of roping methods<br />
including rearfold. 4 Motorised versions available.<br />
4 Extra parts may be hired for the occasional track heavy<br />
show [see page 3.79].<br />
8 Not the cheapest track. 8 Takes up quite a lot of height so<br />
not ideal for height restricted venues.<br />
Track Sections<br />
Standard Track Sections code price<br />
250mm EEETRA01 £20.00<br />
500mm EEETRA02 £24.50<br />
1m EEETRA03 £37.75<br />
2m EEETRA04 £71.50<br />
Joint Set EEETRA05 £5.75<br />
Curved Track<br />
Curved Track Sections code 90 0 segment<br />
1m EEETRA1090 £173.00<br />
1.5m EEETRA1590 £203.00<br />
2m EEETRA2090 £244.00<br />
3m EEETRA3090 £347.00<br />
Runners & Carriers See overleaf for price details.<br />
<strong>Flint</strong> <strong>Hire</strong> & <strong>Supply</strong> Ltd., Queens Row, London SE17 2PX tel 020 7703 9786 fax 020 7708 4189 flints.co.uk<br />
HIRE<br />
<strong>Flint</strong>s<br />
have over 200<br />
metres of Unitrack<br />
available to<br />
hire!<br />
Standard Raced Runner<br />
Overlap Arm<br />
Rearfold Runner<br />
Scenery Carrier Bottom Part<br />
Only<br />
Master Runner with Rope<br />
Clamp<br />
Heavy Duty Scenery Carrier<br />
Top Part Only<br />
2.51<br />
SECTION TWO
2.52<br />
SECTION TWO<br />
Runners and Carriers See previous page for drawings .<br />
Runners & Carriers code each<br />
Standard Raced Runner, 2 wheels EEETRA06 £10.50<br />
Raced Runner for curves, 4 wheels EEETRA06C £14.50<br />
Rearfold Runner EEETRA06R £20.00<br />
Master Runner EEETRA07 £43.50<br />
Master Runner with adjustable rope clamp EEETRA07S £45.50<br />
Master Runner overlap arm EEETRA07A £11.50<br />
Rearfold Accessory EEETRA08 £9.00<br />
Scenery Carrier complete EEETRA28 £78.50<br />
Scenery Carrier top only EEETRA28A £44.00<br />
Scenery Carrier bottom only EEETRA28B £34.50<br />
Scenery Carrier Heavy Duty top only EEETRA28AHD £103.00<br />
Unitrack Pulleys<br />
Header Pulley for Overlap<br />
<strong>Tracks</strong><br />
Return Pulley for Overlap<br />
<strong>Tracks</strong><br />
Foot Stirrup Pulley Adjustable Floor Pulley<br />
Return Pulley for Single<br />
<strong>Tracks</strong><br />
Pulleys code each<br />
Head Pulley [for overlap track] EEETRA09 £44.00<br />
Return Pulley [for overlap track] EEETRA10 £35.00<br />
Head Pulley [for single track] EEETRA31H £27.00<br />
Return Pulley [for single track] EEETRA31R £23.00<br />
Single Track Pulley Set [Head & Return] EEETRA31 £50.00<br />
Foot Stirrup Set EEETRA11 £32.00<br />
Adjustable Floor Pulley EEETRA12 £41.00<br />
Girder Clamp Hook Clamp Studding set Deadline Fitting<br />
Wall Bracket Set Offset Plate<br />
Suspension Fittings<br />
Suspension Fittings code price<br />
Girder Clamp EEETRA13 £27.00<br />
Hook Clamp, 38-52mm [new design] EEETRA14 £20.00<br />
Deadline Fixing EEETRA15 £7.00<br />
Wall Bracket Set [new design] EEETRA16 £18.00<br />
Offset Plate [new design] EEETRA17 £7.50<br />
Studding Set [M12x150mm] EEETRA18 £6.50<br />
à<br />
Head Pulley for Single<br />
<strong>Tracks</strong><br />
This page was updated 30/09/11<br />
Components<br />
Endstop Flat Endstop Line Pick Up Overlap Clip Set<br />
Components code each<br />
Endstop EEETRA24 £7.50<br />
Flat Endstop EEETRA24S £7.50<br />
Line Pick Up EEETRA25 £7.50<br />
Overlap Clip Set [two needed for overlap] EEETRA26 £12.00<br />
Curved Track Fittings<br />
Curve Cord Guide Curve Master Runner Curve Head Pulley Curve Return Pulley<br />
Curved Track Sections code price<br />
Curve Cord Guide Set EEETRA19 £33.00<br />
Curve Master Runner EEETRA20 £71.00<br />
Curve Head Pulley Set EEETRA21 £106.00<br />
Curve Return Pulley Set EEETRA22 £44.50<br />
Curve Suspension Bracket EEETRA23 £19.00<br />
Side Cord System<br />
Side Cord Guide Centre Overlap Divert Side Cord Pulley Set Side Cord Rope Clamp<br />
Side Cord System code price<br />
Side Cord Guide EEETRA32 £45.50<br />
Side Cord Centre Overlap Diverter EEETRA33 £67.50<br />
Side Cord Head & Pulley set, 3 part EEETRA34 £91.50<br />
Side-Cord Rope Clamp for Master Runner EEETRA35 £22.00<br />
Handlines Choose the black polyester cord handline for all<br />
normal use. It is a very high quality reliable handline. If you are<br />
using scenery carriers under heavy load on long tracks it can be<br />
advantageous to choose a rope with virtually no stretch. <strong>Flint</strong>s<br />
stock a Dyneema rope with a matt black polyester cover which is<br />
indistinguishable from the polyester rope except its working<br />
stretch is less than 1.5%. The Dyneema Pro is the best choice<br />
under very heavy loads because it does not have a polyester cover<br />
and the master carrier clamps directly to the line. The working<br />
stretch on this line is below 1.3% [Breaking load 5000kg!]<br />
Handline code per m per 100m<br />
+ Black Polyester Cord[handline] 8mm ROP122A £1.06 £93.00<br />
Black Dyneema [polyester cover] 8mm ROP438 £3.39 £301.00<br />
Dyneema Pro [pure Dyneema] 8mm ROP150508 £5.48 £431.00/100m<br />
Unitrack Motors Please phone for further information.<br />
Motors code price<br />
Trac Drive EEETRAT001 £2,950.00<br />
Linear Drive EEETRAL001 POA<br />
Friction Drive EEETRAFD POA<br />
Hand Track Drive wall mounted EEETRAHTDW £570.00<br />
Hand Track Drive floor mounted EEETRAHTDF £735.00<br />
Remote Pendant [for Trac Drive Controller] TRADP1 £125.00<br />
Triple E Hinges see p2.70. For Triple E Unijack Castors see p 2.63.<br />
<strong>Flint</strong> <strong>Hire</strong> & <strong>Supply</strong> Ltd., Queens Row, London SE17 2PX tel 020 7703 9786 fax 020 7708 4189 flints.co.uk
This page was updated 18/06/12<br />
new<br />
Unibeam combines<br />
track and truss in one unit<br />
to provide a truly adaptable<br />
track system. Particularly<br />
appropriate for permanent<br />
installation, especially<br />
those that host a number of<br />
repertory productions, this<br />
modular system is suitable<br />
for anything from rock concerts<br />
to opera to theatre. With its symmetrical I beam shape and<br />
solid construction, Unibeam is a complete system which accepts an<br />
extensive range of accessories. Capable of large spans between<br />
two suspension points, Unibeam makes an extremely accommodating<br />
fly bar and also lends itself to large curved systems, particulary<br />
cycloramas.<br />
4 Same profile as Unitrack so many of the accessories are interchangable.<br />
4 The continuous slot along the top and bottom will take standard<br />
Unistrut fittings.<br />
4 Uniring accessory locks to the channel with a quick 90° twist<br />
and allows drapes to be quickly attached to the underside of the<br />
beam.<br />
4 Takes Unitracks special Heavy Duty Scenery Carriers allowing<br />
safe working loads of up to 440kg.<br />
Widget<br />
of the Year<br />
LDI’99!<br />
à<br />
Joint Set Uniring Unibeam Scenery<br />
Carrier top part<br />
Head Pulley<br />
Return Pulley Hook Clamp Offset Plate Line Pick Up<br />
Unibeam code price<br />
Straight Track per 1m [up to 6m] UBM01 £37.50<br />
Curved Track [min. radius 2m] UBM01C £55.50<br />
Joint Sets UBM05 £32.00<br />
Uniring URING £2.10<br />
Unibeam Scenery Carrier top part [SWL440kg] UBM28A £212.00<br />
Head Pulley UBM09 £49.00<br />
Return Pulley UBM10 £38.00<br />
Single Track Head Pulley UBM31H £28.00<br />
Single Track Return Pulley UBM31R £25.00<br />
Hook Clamp for 50mm truss UBM14 £20.50<br />
Offset Plate UBM17 £7.75<br />
Studding Set [150mm c/w nuts, channel nut and washers] UBM18 £6.75<br />
Endstop UBM24 £7.75<br />
Flat Endstop UBM24S £7.75<br />
Line Pick Up UBM25 £7.75<br />
Overlap Clip UBM26 £12.75<br />
Trac Drive [motorised contol system] TRADB1 £3,165.00<br />
Remote Pendant for Trac Drive Controller TRADP1 £135.00<br />
Halls T70 Track<br />
Used in large theatres, touring<br />
theatres, television studios<br />
and cinemas. Can be controlled<br />
electrically, with a<br />
handwinch, handline or walkalong.<br />
The maximum recommended<br />
length for a single wipe track is 9m or 18m for an overlap.<br />
Also available in 45 degree and 90 degree curved sections.<br />
4 Old tested design. 4 Heavy construction. 4 Widely used in<br />
older theatres. 8 Awkward to store. 8 Returning sash line can<br />
get caught on bolt fixings.<br />
Halls T70 Track code price<br />
Straight Track 1m section HAL601 £45.20<br />
Straight Track 2m section HAL606 £86.20<br />
Straight Track 3m section [max] HAL609 £130.01<br />
other track lengths plus 45° and 90° curves available<br />
Joint Bolt set (per 4) HALT73791 £40.23<br />
Overlap Clip [per pair] HALT71172 £27.53<br />
Head Pulley [handline] HAL701 £63.40<br />
Return Pulley [handline] HAL702 £47.09<br />
Floor Fixing Pulley [handline] HAL719 £42.11<br />
Wheeled Runner (per 10) SWL 7kg Space 300mm HAL714 £40.84<br />
Ball Raced Runner (per 10) SWL 9kg Space 300mm HAL713 £76.79<br />
Master Runner (per 2) HALT71105 £100.56<br />
Endstop (pack of 2) HAL704 £12.04<br />
Black Polyester Handline 8mm Ø ROP122A £1.06<br />
GENERAL CURTAIN TRACK ACCESSORIES<br />
Tab Hook Twin Hook<br />
Unirail Clip<br />
Stage Track A<br />
Bobbin<br />
Cotton Reel<br />
Bobbin<br />
Unirail<br />
Runner<br />
T400 Slider<br />
PTFE Spray<br />
Track Spares <strong>Flint</strong>s have<br />
a wide experience of tab tracks<br />
based on thirty years of<br />
theatre work. We can normally<br />
recognise a component from a<br />
digital photo or sketch. Even<br />
very old components can nor-<br />
mally be supplied. If you have a troublesome track and you are based<br />
within reasonable travelling distance from central London we can visit<br />
your stage and either effect immediate repairs or suggest a course of<br />
action. Below we have listed some of the common components and spares<br />
that we can supply.<br />
Common Components and Spares code price<br />
Twin Hook HAL1701 £0.75<br />
Tab Hook HAL3578 £0.75<br />
Unirail Clip ROPGBC £1.50<br />
Unirail Runner EEERAL06 £7.30<br />
Stage Track A bobbins [blue wheel] SAT16 £3.00<br />
Cotton Reel type bobbins (per 10) [for old T60] HAL02084 £29.06<br />
T400 Slider Carrier [per 10] HALT41716 £6.16<br />
PTFE Spray 400ml [for tracks with too much friction] SAF516 £11.44<br />
No4 Jute Sash [economical option for T60] per m ROP042M £0.25<br />
No6 Jute Sash [economical option for T70] per m ROP044M £0.35<br />
Medium weight Jack Chain [per 10m] WIR862 £7.30<br />
Heavy weight Jack Chain [per 10m] WIR861 £12.65<br />
<strong>Flint</strong> <strong>Hire</strong> & <strong>Supply</strong> Ltd., Queens Row, London SE17 2PX tel 020 7703 9786 fax 020 7708 4189 flints.co.uk<br />
2.53<br />
SECTION TWO