Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
82<br />
UMETA History<br />
Hermann<br />
Ulrichskötter<br />
1926 Company founded by Hermann Ulrichskötter<br />
Margarete Maser-<br />
Ulrichskötter<br />
1953 Relocation of the company to current location in Ummeln, Bielefeld<br />
1965 General management takeover by Margarete Maser-Ulrichskötter,<br />
daughter of Hermann Ulrichskötter<br />
1993 Mr. Frank Maser enters the third generation of company general<br />
management<br />
1993 Founding of a subsidiary in the USA<br />
Caution! Safety Information<br />
It is imperative that you observe the following information:<br />
UMETA grease guns can achieve a lubrication pressure of over 800 bar /<br />
11,600 PSI.<br />
For this reason, <strong>pl</strong>ease ensure that all components are designed for this high<br />
pressure.<br />
Service your UMETA products regularly!<br />
Before using them first, check all connections for tight fit and only use<br />
components which do not show any signs of damage.<br />
Never point the discharge opening at yourself or at other peo<strong>pl</strong>e.<br />
Never hold onto hoses under pressure and never loosen connections which are<br />
under pressure.<br />
Hoses are subject to a severe ageing process!<br />
For this reason you should always re<strong>pl</strong>ace hoses after three years at the latest.<br />
Hoses may never be buckled or bent with force. The smallest bending radius is<br />
100 mm.<br />
General Information<br />
We reserve the right to make changes to products with regard to technical<br />
properties, dimensions and materials, and to remove products from our range.<br />
Products may deviate from catalogue illustrations in their design, colour and<br />
size.<br />
Sup<strong>pl</strong>y of turned parts takes <strong>pl</strong>ace in accordance with our „Technical terms<br />
of delivery for turned parts“, which you can find in the download area of our<br />
Internet site.<br />
Frank Maser Administration Site<br />
1994 Certification to DIN EN ISO 9001 as first company in the sector<br />
2004 UMETA is awarded the „Bielefelder-Ökoprofit-Betrieb 2004“ prize<br />
2006 Extensive upgrade of machinery in the CNC machine sector to extend<br />
special turned part range<br />
2007 TÜV certification to „customer satisfaction and service quality“<br />
2011 Re-certification of our quality management to ISO 9001:2008<br />
UMETA compressed air guns may never be operated under more than 10 bar /<br />
145 PSI air pressure.<br />
Special lubricating nip<strong>pl</strong>es may be required for lubrication using automatic<br />
lubricating equipment. Always inform yourself in advance about the maximum<br />
permissible pressure!<br />
Only use UMETA products with original UMETA accessories which are<br />
intended for this purpose. Modifications to UMETA Products can lead to severe<br />
damage or injuries. If you are injured, consult a doctor immediately!<br />
UMETA products may never be brought into contact with hazardous or aggressive<br />
materials.<br />
Furthermore our General Conditions of Sale, which are on the back of our<br />
business paper and on our Internet site, ap<strong>pl</strong>y to all deliveries.<br />
Our 4 years guarantee is subject to our guarantee terms and conditions which<br />
can be found at www.umeta.com<br />
We accept no liability for any errors or omissions.<br />
www.umeta.com