Stober 3 MGS Speed Reducers

More documents

Recommendations

Info

K/KL Series: RIGHT ANGLE — Solid Shaft/Hollow Output K/KL Series Features • Input rating up to: 2 HP (KL); 105 HP (K) • Ratio options: 4:1 – 32:1 (KL); 4:1 – 373.7:1 (K) • Output Torque capability up to: 443 lb-in (KL); 92,250 lb-in (K) • NEMA input capabilities: 56C (KL); 56C, 143/145TC, 182/184TC, 213/215TC, 254/256TC, 284/286TC, 324/326TC, 364/365TC (K) • Output bore diameters: 3/4” (KL); 1” – 4” (K) • Housing style options: flange, feet, or tapped holes (K/KL); torque arm bracket (K only) The K/KL Series offer higher input-to-output efficiencies than conventional worm gear drives, reducing costs with smaller sized gear drives and motors, and optimum energy savings. SHIPS in 1 DAY! NO EXPEDITE FEE FOR 24 HOUR SERVICE K/KL Series Benefits • No maintenance - totally enclosed with no breather to allow contaminants in or oil out • Lubricated for life with Mobil oil • Simple motor mounting and removal with Bowex coupling • Energy savings - up to 97% efficiency • Easy installation and removal with our patented bushing system and any horizontal mounting position • Reliability guaranteed with 3 year warranty • Adaptability - mounting gear reducer from either machine side means less storeroom stock • Durability - IP69K Certified to prevent water and dust ingress • Assembled in USA • Combine units to achieve slower speeds to meet your application needs (K Series) K/KL Food & Corrosion Resistant Options “F” Option for Food Duty Applications • Totally enclosed unit — no breathers, maintenance free, lubricated for life • Mobil SHC CIBUS 220 food grade oil • Anti-microbial clear coat • 316 stainless steel epoxy coating • Stainless steel shaft, hollow bore or double bushing output • USDA Accepted Equipment “B” Option for Corrosion Resistant Applications • Totally enclosed unit — no breathers, maintenance free, lubricated for life • Mobil 600XP220 mineral oil • 316 stainless steel epoxy coating • Stainless steel shaft, hollow bore or double bushing output Other K/KL Design Options Available: • Plated or stainless steel hardware • IP69K certified to prevent water and dust ingress (see page 6 for full details) 32 MGS ® Speed Reducers V.29 800.711.3588 • www.stober.com
Overview K/KL Ordering Options At-a-Glance K and KL Series are available in a wide range of user-selected design options that tailor the speed reducer to your motor and exact application requirements. Use the appropriate order codes below to build a part number for the complete assembly. Part Number Examples: 1 2 3 4 5 6 7 8 9 0 !** Standard duty KL Series KL 2 0 2 A F 0040 ML2R/ 050 Standard duty K Series K 2 0 2 A F 0040 MR140/ 050 EL1256 Design Option 1 Series Part Number Code K KL Description Modular right angle helical/bevel Compact right angle helical/bevel 2 Size 2 K Series: 10 sizes of speed reducers (1 thru 10); KL Series: size 2 only 3 Generation 0 0 for sizes K1 thru K4; 1 for sizes K5 thru K10; 0 for KL 4 # of Stages 2 Two, three or four stage (determined by ratio) 5 Output* 6 Housing A P V W F G GD NG 7 Ratio 0040 8 Motor Adapter 9 0 ! NEMA Frame Size (refer to Selection Data tables) Food & Corrosion Resistant Option Mounting Position** Refer to page 37 illustrations Food duty K Series K 2 0 2 A F 0040 MR140/ 050 F EL1256 MR140 thru MR350 ML2R 050 140 180 210 250 280 320 360 F B EL1 EL2 EL3 EL4 EL5 EL6 EL1256 Hollow bore output (K Series, see page 36); KL Series Ø20 mm* Solid shaft output with key (KL only), Ø0.75” or 20 mm (specify side 3, 4 or double sided)* Solid shaft output with key (K only, see page 36), (specify side 3, 4, or double sided) K Series: Single or double wobble-free bushing (specify side 3 or 4 for single bushing) KL Series: Double wobble-free bushing (Ø0.75”) Output flange mount (specify side 3 or 4) Note: square flange for KL; round flange for K Pilot Circle Diameter (PCD) tapped holes Torque arm bracket mounting for K Series only (specify side 1 or 5; or 2 on K1 only) Foot mounting (specify side 1 or 5; or side 2 on K1 only) Ratios range from 4:1 to 373.7:1 (K Series) or 4:1 to 32:1 (KL Series) Refer to Selection Data tables. Note: if a slower speed is required, units can be combined to achieve the necessary ratio for low speed applications. Contact STOBER Drives Inc. K Series: Round motor adapter sizes (refer to Selection Data tables) KL Series: Round motor adapter 56C 143/145TC 182/184TC 213/215TC 254/256TC 284/286TC 324/326TC 364/365TC Food duty service Corrosion resistant duty service K Series: Mounting position codes required for 3 year warranty; KL Series: Mounting position is unrestricted, no code required * Standard KL Series Hollow Bore and Solid Shaft options are carbon steel; contact factory for stainless steel option. Double solid shaft is only available in metric. ** Mounting position is added to “notes” section of order. K/KL Series: RIGHT ANGLE — Solid Shaft / Hollow Output 800.711.3588 • www.stober.com MGS ® Speed Reducers V.29 33
Page 1 and 2: MGS ® Speed Reducers Geared to a h
Page 3 and 4: Geared to a higher standard Conten
Page 5 and 6: Geared to a higher standard Servic
Page 7 and 8: Wobble Free Bushing Design KSS F K
Page 9 and 10: Overview Selection At-a-Glance IRON
Page 11 and 12: Application Specific Sizing Determi
Page 13 and 14: Overview IP69K/STAINLESS STEEL KSS
Page 15 and 16: Selection Data IP69K/STAINLESS STEE
Page 25 and 26: Dimensional Data IP69K/STAINLESS ST
Page 31: Dimensional Data IP69K/STAINLESS ST
Page 35 and 36: Overview K Output and Housing Confi
Page 37 and 38: Overview K Mounting Position Option
Page 39 and 40: Overview K/KL Sizing/Selection: 1.
Page 41 and 42: Selection Data 1750 RPM Input Part
Page 49 and 50: Selection Data Input HP 1750 RPM In
Page 61 and 62: Selection Data Input HP 1750 RPM In
Page 67 and 68: Dimensional Data KL Series with “
Page 69 and 70: Dimensional Data KL Series (KL202 o
Page 71 and 72: Dimensional Data Torque Arm Mountin
Page 73 and 74: Dimensional Data Table 1 K Series U
Page 83 and 84:
Dimensional Data Table 1 K Series U
Page 85 and 86:
Dimensional Data Table 1 K Series U
Page 87 and 88:
Dimensional Data Table 1 Flange Dim
Page 89 and 90:
Overview C Ordering Options At-a-Gl
Page 91 and 92:
Overview C Mounting Position Option
Page 93 and 94:
Selection Data C Sizing/Selection:
Page 95 and 96:
Selection Data 1750 RPM Input Part
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Selection Data Input HP 1750 RPM In
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Dimensional Data Optional Output Fl
Page 123 and 124:
Dimensional Data Table 1 C Series U
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Overview F Ordering Options At-a-Gl
Page 133 and 134:
Overview F Series Output Options BL
Page 135 and 136:
Selection Data F Sizing/Selection:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Selection Data “A” Hollow Outpu
Page 145 and 146:
Dimensional Data Table 3 F Series U
Page 147 and 148:
Dimensional Data “V” Shaft Outp
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Technical Reference C Series Solid
Page 155 and 156:
Technical Reference Motor Adapter C
Page 157 and 158:
Returns Policy Return Delivery Note
Page 159 and 160:
Other Products from STOBER ServoSto
show all

Stober 3 MGS Speed Reducers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?