rack-and-cabinet-systems-catalog (1)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Faster.<br />
Easier.<br />
Better.<br />
XME Series — Media Cabinets<br />
Cost effective <strong>and</strong> efficient design for broadcast, commercial AV<br />
<strong>and</strong> security applications<br />
Design <strong>and</strong> Structural Features<br />
• Available in four heights <strong>and</strong> two depths<br />
• 16-gauge, one-piece formed <strong>and</strong> vented sides;<br />
16-gauge formed bottom <strong>and</strong> top<br />
- 48.87" (24RU) to 83.87" (44RU) Height x 22"<br />
Wide x 20" or 26.5" Deep<br />
• Top <strong>and</strong> bottom EIA rail support channels are an<br />
integral part of the top <strong>and</strong> bottom; formed<br />
center rail support channels are spot welded to<br />
the sides<br />
• Two 12-gauge EIA mounting rails (10-32<br />
tapped); additional rails can be added (optional)<br />
• Front <strong>and</strong> side ventilation for convection cooling<br />
• St<strong>and</strong> alone or gangable, with integrated<br />
side panels<br />
• Reversible Doors: Frame is available with<br />
optional front <strong>and</strong> rear solid, glass or perforated<br />
Surface-Mount doors<br />
• Top Panel: Solid, vented, with 10" fan or (4) 4"<br />
fans; depths of 20 <strong>and</strong> 26.5"<br />
• Caster Base: Recessed, depths of 20" <strong>and</strong><br />
26.5"; adds 1" to height of frame; casters are<br />
recessed, allowing leveling legs to be lowered<br />
when <strong>cabinet</strong> is in position, allowing casters to<br />
be raised off the floor<br />
• Rack-Mount Drawers: 16" deep sliding<br />
storage drawers with lock; available in four<br />
heights; mount on EIA rails (mounting hardware<br />
included); compatible with all 19" mount <strong>rack</strong>s<br />
Part No. shown here: XME44260001<br />
(44RU H x 22" W x 26" D)<br />
Broadcast Racks <strong>and</strong> Cabinets<br />
Cable Management<br />
• Rear Access — Top: three antenna knockouts,<br />
each .62" dia. two conduit knockouts, .87" dia.<br />
<strong>and</strong> 1.12" dia. 9" x 2.25" opening with cover<br />
plate. Bottom: 4 conduit knockouts, two @ .87"<br />
dia., two @ 1.12" dia. 9" x 2.25" opening with<br />
cover plate<br />
• Side Access — Top: 4" dia. knockout, located<br />
toward the rear. Bottom: 4" dia. knockout,<br />
located toward the rear. Optional edge guard to<br />
protect the cable is available<br />
• Top Access — 1", 1.5" <strong>and</strong> 2" knockouts,<br />
located toward the rear of top panel<br />
• Cable tie holes span entire length of EIA rail on<br />
the attachment flange (spaced at 1.75")<br />
• Fully open top <strong>and</strong> bottom facilitate cable routing<br />
Ease of Installation<br />
• Partially open top with optional configurable<br />
panels; rear of top contains various electrical<br />
knockouts for cable entry<br />
• Open bottom with leveling legs <strong>and</strong> hole pattern<br />
to bolt frame to floor, captive grounding studs<br />
in bottom sills<br />
• Ganging can be done after equipment is<br />
placed in <strong>rack</strong><br />
20" or<br />
26.5"<br />
Part No. shown here: XME442641310<br />
(44RU H x 22" W x 26" D)<br />
Color<br />
• Black durable powder coat<br />
Static Load Capacity<br />
• 2,000 lbs.<br />
22"<br />
www.belden.com 1.800.BELDEN.1 (800.235.3361)<br />
57
Change language