23.12.2012 Views

AutoJet® PWM Spray Control Panel - Spraying Systems ...

AutoJet® PWM Spray Control Panel - Spraying Systems ...

AutoJet® PWM Spray Control Panel - Spraying Systems ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Specification<br />

<strong>Spray</strong> <strong>Control</strong> <strong>Panel</strong> Functions Output: Automatic <strong>Control</strong>s Input:<br />

• Off – Power to the unit is off and the system can not spray • Duty Cycle <strong>Control</strong> – 0 to 20mA<br />

• On – Power is supplied to the driver and the system sprays<br />

if commanded<br />

• On/Off <strong>Control</strong> – Switch to ground<br />

<strong>Control</strong>: Boost Version:<br />

• Local – Duty cycle and nozzle state are controlled at the<br />

panel (inside or outside dial)<br />

• <strong>PWM</strong> <strong>Control</strong> Signal – Switch to ground<br />

• Remote – Duty cycle and nozzle state are controlled by a<br />

remote unit, such as a PLC<br />

Power Supply:<br />

Duty Cycle: • 115 VAC, 60 Hz<br />

• Minimum 10% – Nozzle sprays only 10% of rated flow at the<br />

current spray pressure<br />

North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA<br />

Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000<br />

Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842<br />

www.spray.com<br />

Enclosure:<br />

• Maximum 90% – Nozzle sprays 90% of rated flow at the<br />

current spray pressure<br />

• Rating – NEMA 12<br />

Internal <strong>Control</strong>s: • Ambient Temperature – 32°F to 104°F<br />

• Frequency – 0.1 to 166 Hz • Relative Humidity – up to 95%<br />

• Negative Pulse Width – 0.5 to 6.5 ms<br />

Bulletin No. 662 Printed in the U.S.A. ©<strong>Spray</strong>ing <strong>Systems</strong> Co. 2009<br />

<strong>Spray</strong><br />

Nozzles<br />

<strong>Spray</strong><br />

<strong>Control</strong><br />

<strong>Spray</strong><br />

Analysis<br />

<strong>Spray</strong><br />

Fabrication

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!