Spray Nozzles Spray Control Spray Analysis Spray Fabrication

HHX
Ordering Info
HHX FullJet Spray Nozzle
1/4 HHX - 5
Inlet Nozzle Capacity
Conn. Type Size
Performance
Nozzle Inlet
Conn. NPT or
BSPT (in.)
1/4
3/8
Nozzle No.
7
Cooling/Casting
HHX FullJet Nozzles – Provide Uniform
Distribution, Reliable Operation and Simplified
Maintenance in Billet Casters
Quality sprays contribute to better steel and increase the efficiency of your caster,
and our HHX FullJet nozzles do exactly that – provide uniform cooling to ensure
quality problems like diagonal cracks are avoided.
Orifice
Dia.
Nom.
Key benefits and features include:
• A wide range of nozzle sizes allows you to select different spray densities to customize
the spray zone cooling
• The HHX nozzle body features a hex body and allows the use of standard sockets
for easy installation and removal
• A staked-in vane design ensures the vane is secure and will not fall out during
caster operation
Specifications:
• Capacities range from .50 to 2.2 gpm (1.9 to 8.4 l/min) at 10 psi (.7 bar)
• All brass construction with a staked vane
• Inlet connections: 1/4” and 3/8”
Dimensions
Max. Free
Passage
Dia.
Capacity (Gallons per minute)*
* At stated pressure in psi.
Spray Angle
Degree*
in. in. 5 7 10 20 30 40 60 80 100 150 7 20 80
1/4HHX-5 5/64 3/64 .36 .42 .50 .69 .82 .95 1.2 1.3 1.5 1.8 60 65 61
1/4HHX-6.5 3/32 1/16 .47 .55 .65 .89 1.1 1.3 1.5 1.7 1.9 2.3 45 50 46
1/4HHX-8 7/64 3/64 .58 .68 .80 1.1 1.3 1.5 1.8 2.1 2.3 2.8 68 80 76
1/4HHX-10 7/64 1/16 .73 .85 1.0 1.4 1.7 1.9 2.4 2.7 3.0 3.6 58 67 61
1/4HHX-12 1/8 1/16 .87 1.0 1.2 1.7 2.0 2.3 2.7 3.1 3.5 4.2 71 81 72
1/4HHX-14.5 9/64 1/16 1.05 1.2 1.45 2.0 2.4 2.7 3.3 3.8 4.2 5.0 78 89 75
3/8HHX-15 9/64 3/32 1.1 1.3 1.5 2.1 2.5 2.9 3.5 4.0 4.4 5.3 64 67 61
3/8HHX-18 5/32 3/32 1.3 1.5 1.8 2.5 3.0 3.4 4.1 4.7 5.2 6.3 77 86 73
3/8HHX-20 11/64 7/64 1.5 1.7 2.0 2.8 3.4 3.8 4.6 5.3 5.9 7.0 76 80 73
3/8HHX-22 3/16 7/64 1.6 1.9 2.2 3.0 3.7 4.2 5.1 5.8 6.4 7.8 87 90 82
���������������������������������
���������������������