KNAUER Product Selection Guide 2021
KNAUER manufactures high-end scientific instruments for research, routine analysis, quality assurance, and other applications. Supported technologies include liquid chromatography, precise handling and pumping of liquids up to high pressures, as well as flow-through detection of dissolved substances. Customizable products and solutions are one of our strengths. Made in Germany. Developing devices that help people in the laboratory to gain new insights or facilitate their work. This is the spirit in which KNAUER was founded and continues to drive the company today.
KNAUER manufactures high-end scientific instruments for research, routine analysis, quality assurance, and other applications. Supported technologies include liquid chromatography, precise handling and pumping of liquids up to high pressures, as well as flow-through detection of dissolved substances. Customizable products and solutions are one of our strengths. Made in Germany.
Developing devices that help people in the laboratory to gain new insights or facilitate their work. This is the spirit in which KNAUER was founded and continues to drive the company today.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Dynaseal Fittings<br />
The DYNASEAL connecting system connects capillaries made out of stainless steel and PEEK,<br />
as well as PTFE and Tefzel tubings with low dead volumes. It allows maintenance-free operation<br />
and provides a long life. Suitable for UNF-threads of type 10/32.<br />
The system consists of a bushing, a split-grooved clamping ring, and a polymer sealing. The<br />
split-grooved clamping ring and polymer sealing are slipped over the capillary “back to back”,<br />
while the bushing tightens all parts. Thus, leak-free operation is made possible. DYNASEAL connections<br />
are pressure stable up to 450 bar. DYNASEAL can be optionally used with double-cone<br />
sealings made out of PEEK. In this case, pressure stability is accordingly reduced to 150 bar.<br />
Article<br />
number<br />
Description<br />
Material<br />
For capillary<br />
OD [inch]<br />
Thread<br />
Included<br />
ferrules<br />
Max.backpressure<br />
[bar]<br />
Amount<br />
in set<br />
Picture<br />
A0108<br />
Dynaseal<br />
bushings,<br />
short<br />
SST 1/16" UNF<br />
10/32<br />
Split-grooved<br />
clamping<br />
rings A0484 &<br />
polymer Sealing<br />
rings A0139<br />
450 4<br />
A1021<br />
Dynaseal<br />
bushings,<br />
short<br />
SST 1/16" UNF<br />
10/32<br />
without ferrules<br />
depends on<br />
ferrule<br />
10<br />
A0181<br />
Dynaseal<br />
bushings,<br />
long<br />
SST 1/16" UNF<br />
10/32<br />
Split-grooved<br />
clamping<br />
rings A0484 &<br />
polymer Sealing<br />
rings A0139<br />
450 3<br />
A1064<br />
Dynaseal<br />
bushings,<br />
long<br />
SST 1/16” UNF<br />
10/32<br />
without ferrules<br />
depends on<br />
ferrule<br />
5<br />
A1020<br />
Dynaseal<br />
bushings,<br />
short<br />
SST 1/16” UNF<br />
10/32<br />
Biconical<br />
sealing rings<br />
A1022<br />
150 10<br />
A1069<br />
Dynaseal<br />
bushings,<br />
long<br />
SST 1/16” UNF<br />
10/32<br />
Biconical<br />
sealing rings<br />
A1022<br />
150<br />
5<br />
A0736<br />
A0735<br />
Dynaseal<br />
bushings,<br />
long<br />
Dynaseal<br />
bushings,<br />
long<br />
SST 1/8” M8x1 Split-grooved n/a<br />
clamping<br />
rings A1239 &<br />
4<br />
polymer Sealing<br />
rings A0232<br />
1/8” M8x1 without ferrules depends on<br />
ferrule 4<br />
A0644<br />
Dynaseal<br />
bushings,<br />
short<br />
SST 1/8” M8x1 Split-grooved<br />
clamping<br />
rings A1239 &<br />
polymer Sealing<br />
rings A0232<br />
n/a<br />
4<br />
A1067<br />
Dynaseal<br />
bushings,<br />
short<br />
SST 1/8” M8x1 without ferrules depends on<br />
ferrule 4<br />
A1201 Dynaseal<br />
bushings,<br />
long, hex<br />
head<br />
A1201-1 Dynaseal<br />
bushings,<br />
long, hex<br />
head<br />
SST 1/8” M8x1 without ferrules depends on<br />
ferrule<br />
PEEK 1/8” M8x1 without ferrules depends on<br />
ferrule<br />
4<br />
4<br />
55 | Accessories
Change language