KNAUER Product Selection Guide 2021
KNAUER manufactures high-end scientific instruments for research, routine analysis, quality assurance, and other applications. Supported technologies include liquid chromatography, precise handling and pumping of liquids up to high pressures, as well as flow-through detection of dissolved substances. Customizable products and solutions are one of our strengths. Made in Germany. Developing devices that help people in the laboratory to gain new insights or facilitate their work. This is the spirit in which KNAUER was founded and continues to drive the company today.
KNAUER manufactures high-end scientific instruments for research, routine analysis, quality assurance, and other applications. Supported technologies include liquid chromatography, precise handling and pumping of liquids up to high pressures, as well as flow-through detection of dissolved substances. Customizable products and solutions are one of our strengths. Made in Germany.
Developing devices that help people in the laboratory to gain new insights or facilitate their work. This is the spirit in which KNAUER was founded and continues to drive the company today.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A150-1 A2511-1 A0150<br />
Polymer T-connectors<br />
T-connector to connect 3 capillaries with 1/16’’ OD<br />
(material: PETP/POM, thread: 10-32 UNF, coned), inclusive 3 bushings and sealing rings<br />
T-connector to connect 3 capillaries with 1/16’’ OD<br />
(material: PEEK, thread: 10-32 UNF, coned), without bushings<br />
T-connector to connect 3 capillaries with 1/8’’ OD<br />
(material: PEEK, thread: M8x1, coned), including 2 one piece 1/8”-PEEK fittings<br />
A0150<br />
A150-1<br />
A2511-1<br />
A0121<br />
A1096<br />
SST X-connectors<br />
X-connector to connect 4 capillaries with 1/16’’ OD (material: stainless steel, thread: 10-32 UNF),<br />
including 4 bushings and ferrules<br />
X-connector to connect 4 capillaries with 1/8’’ OD (material: stainless steel, thread: M8x1),<br />
including 4 bushings and ferrules<br />
X-connector to connect 4 tubings with 1/4’’ OD (material: stainless steel, Swagelok®) for<br />
1000 ml/ min Systems<br />
A0121<br />
A1096<br />
A58272<br />
A0151<br />
Polymer X-connectors<br />
X-connector to connect 4 capillaries with 1/16’’ OD (material: PEEK, thread: 10-32 UNF),<br />
including 4 one-piece fittings<br />
A0151<br />
61 | Accessories
Change language