Farms & Farm Machinery #401

Harvesting 

10 page 

special feature 

Issue 401 $7.95 On sale 12/8/2021 

PLUS 

Spot Test 

Hardi's GeoSelect 

spray system 

Wild Ride 

Livestock transport 

with a Kenworth 

All-Rounder 

Hustler Combi RX218 

Perfect 

MATCH 

With new designs developed specifically for poultry, piggeries, 

cotton and hay; Dieci’s range of specialty telehandlers 

is built tough for Australian requirements >> Page 14 

,!3BD0A6-aaejdg!:k;T 

’10 Case IH 435 • $154,000 • 08 6336 7780 Amazone Seed hopper • $55,000 • 03 8547 8799 ’14 Case LB434 Baler • $101,200 • 02 9064 7288 ’20 Case IH Tractor • $77,900 • 08 7007 6557 

INSIDE: 64+ pages of new & used farm machinery for sale + more at TradeFarmMachinery.com.au

OUR MOST POWERFUL TRACTOR 

PX1153 

115HP CAB & 4IN1 LOADER 

115 HP Perkins diesel engine 

32 x 32 manual transmission 

Electronic linkage 

Declutch button 

Large hydraulic oil flow 

Air suspension seat 

Wet clutch forward/reverse shuttle 

$ 

82,723 EX 

INCLUDES 4IN1 LOADER. DELIVERY FEE MAY APPLY. 

GST* 

$ 

90,995 

INC GST* 

BUILT WITH MORE 

BITE 

1800 186 866 

www.kioti.com.au

FREE 

TOPCON GPS 

X25 8” DISPLAY 

INCLUDED WHEN YOU 

PURCHASE A KIOTI PX1153 

BETWEEN JULY 1 ST - AUGUST 

31 ST OR WHILE STOCKS LAST. 

AUTO STEERING 

OPTION FOR ONLY 

$ 

6,000 

EXTRA 

EX 

GST 

PACKAGE VALUED AT 

$15,000 EX GST 

PX1153 CAB MODEL WITH OPTIONAL FRONT FENDERS PICTURED 

AUTO STEERING OPTION $6,600 INC GST 

PACKAGE VALUED AT $16,500 INC GST 

Topcon comes standard with a two year warranty. 

4 YEAR WARRANTY° FINANCE FROM 0.00 % PA^ 

*Pricing ex Brisbane, Melbourne and Perth warehouses. Pre-delivery and freight charges may apply.^0.00%p.a. applies to new Kioti PX tractor models only based on minimum 1/3rd deposit 

and 24 monthly repayments. Standard fees and lending conditions apply to approved ABN holders. PFG Credit is not provided or intended for personal, domestic or household purposes. Note: 

Alternative special finance package rates, terms, deposits and structures are also available up to 5 years. PFG Credit is a division of De Lage Landen Pty Limited ABN 20 101 692 040. Offers expire 

31st August 2021 or while stocks last . ˚24 months 1500 hours = Full Warranty. 48 months 2000 hours = Powertrain Warranty. Images for illustration purposes only. 

FFM-DPS-5211750-CS-401

Contents 

Issue 401 

50 

Check out Agco’s updates to Fendt’s 2022 

line-up of Ideal combine harvesters 

14 

28 64 

On the cover 

14 With new designs developed specifically 

for poultry, piggeries, cotton and hay, Dieci’s 

range of specialty telehandlers is built tough 

for Australian requirements 

News 

In this issue’s news coverage seeding equipment 

is proving popular, with Horsch incorporating 

customer feedback into upgrades to its Sprinter 

NT tine seed drill and Lemken releasing its Solitair 

23+ front hopper and OptiDisc 25 coulter bar, while 

John Deere looks to double planting speeds with 

trials of its ExactEmerge row units and Väderstäd 

celebrates the 30th anniversary of its Seed Hawk 

precision seeding system. 

6 Krone releases EasyWrap 150 bale wrapper 

John Deere explores faster seeding tech 

7 Horsch upgrades Sprinter NT after feedback 

Kubota expands diesel generator range 

Lemken releases new seeding equipment 

8 CF Moto expands UTV range 

Case IH’s AFS Connect Magnum impresses 

10 Hardi launches selective spraying tech 

12 Stockyard’s new CBA deal targets emissions 

16 John Deere ends JD Link subscription fee 

Agco launches Precision Ag Line pilot 

17 Väderstäd celebrates 30 years of Seed Hawk 

18 TMA on the right to repair and modify 

20 UQ project will find perfect barley root shape 

22 Chinese tariffs to impact Oz wine market 

Event news 

The bad news is that AgQuip has been postponed 

due to COVID restrictions, however there is hope 

for the future with 13 agricultural shows and related 

youth groups across Australia granted funding 

for young farmer competitions. We also have the 

highlights from June’s New Zealand Fieldays event 

24 November AgQuip 

Grants announced for young farmer comps 

26 Calendar of upcoming events 

28 NZ Fieldays roundup 

Market news and opinion 

34 Market news with TMA’s Gary Northover 

reports on an end-of financial year sales 

boost for agricultural tractors 

36 WA Farmers CEO Trevor Whittington 

explores the link between the cost of 

labour and expanding machinery size 

50 

Features and reviews 

42 The Wild family’s history in moving 

livestock and its trusty Kenworth 

nicknamed ‘Grunter Hunter’ 

60 Hustler’s new Combi RX218 feed wagon is big, 

bold, and very capable at what it does 

64 The Vigolo Eagle-DT heavy-duty mulcher 

makes short work of gorse, kikuyu grass and 

trees to quickly clear land 

Regular items 

84 Hot Deals: Hand-picked items for sale 

104 Plant & Equipment 

Cranes, compressors and more 

121 Private advertising 

Use this coupon to list your item for sale 

122 Index 

Special feature: Harvesting 

This issue’s special features looksat recent releases 

and updates in the harvesting space 

50 Agco to update Fendt Ideal combines 

52 Case IH’s AFS Harvest Command 

Improved compliance with mass limits 

54 Grain trucks meeting mass limits 

56 John Deere premium oils 

58 New Holland adds NutriSense nutrient 

analysis system to its precision ag portal 

Editorial & Design 

Editor Andrew Hobbs 

andrew.hobbs@primecreative.com.au 

Journalists 

Lincoln Bertelli, Anthony Wingard 

Contributors Warren Aitken, Justin 

Bennett, Jaiden Drought, Gary Northover, 

Trevor Whittington 

Production Co-ordinator Cat Fitzpatrick 

Art Director Daz Woolley 

Advertising 

Business Development Manager 

Carl Rakusin 0409 838 984 

carl.rakusin@primecreative.com.au 

Subscriptions 

Ph 136 116 Fax 02 9267 4363 

Web magshop.com.au 

Reply Paid 4967, Sydney, NSW, 2001 

ISSN 1449-6399 

Executive 

CEO John Murphy 

Publisher Christine Clancy 

COO Zelda Tupicoff 

Operations Regina Fellner 

Trader Group Sales Director 

Brad Buchanan 

Printing 

IVE print, NSW 

Farms & Farm Machinery 

is published by Prime Creative Media 

11-15 Buckhurst Street, 

South Melbourne VIC 3205 

Telephone: (+61) 03 9690 8766 

Website: www.primecreative.com.au 

Farms & Farm Machinery magazine is owned by Prime Creative Media. All material in Farms & Farm Machinery is copyright and 

no part may be reproduced or copied in any form or by any means (graphic, electronic or mechanical including information and 

retrieval systems) without written permission of the publisher. The Editor welcomes contributions but reserves the right to accept 

or reject any material. While every effort has been made to ensure the accuracy of information Prime Creative Media will not 

accept responsibility for errors or omissions or for any consequences arising from reliance on information published. Opinions 

expressed in Farms & Farm Machinerys are not necessarily the opinions of, or endorsed by the publisher unless otherwise stated. 

4 Farms & Farm Machinery

NO MATTER WHICH BOBCAT COMPACT 

TRACTOR YOU CHOOSE, IT’S WELL EQUIPPED 

TO KEEP UP WITH YOUR TO-DO LIST. 

CT1025 

CT2035 

CT20400 

CT4045 

CT40555 

| 25hp 

| 35hp 

| 38hp 

| 45hp 

| 55hp 

BOBCAT TELEHANDLERS ARE 

IN STOCK 

AND READY FOR 

QUICK 

DELIVERY 

AT JUST 

1.99% 

FINANCE * 

*1.99% finance is available on all new Bobcat Telescopic Handlers sold by Clark Equipment. Finance is via 

MKP Finance Pty Ltd ABN 56 611 706 784 and is based on a 36 month chattel mortgage with 10% deposit 

required, followed by 36 equal monthly repayments and no balloon. Finance is subject to credit approval and 

is only available to approved ABN holders. Terms and conditions apply. For further details, contact Clark 

Equipment. Offer ends 31/08/2021, while stock lasts. 

www.bobcatofaustralia.com.au 

clark@clarkequipment.com 

1300 736 848 

Bobcat Australia 

bobcatofaustralia 

Bobcat Australia

News 

BALING 

Krone’s solo bale wrapper features a new ground 

roller, guide roller and bale turner to make the 

unit safer and more convenient 

Freestyle flow 

Krone has released its first ever solo bale wrapper to the 

Australian market and claims the machine has the world’s 

fastest single arm wrapping speed. 

Boasting a speed of 36 rpm, the EasyWrap 150 runs with 

fully automatic function from bale pick-up to discharge. 

Krone’s assistant product manager Nathan Thomas 

describes the new product as “versatile” and says it combines 

several stages of the process into one. 

“Be it collecting, wrapping or unloading bales, the new 

EasyWrap 150 is extremely versatile,” he says. 

“The fully automatic 3PL single arm wrapper can be 

mounted on the front or rear linkage as well as telescopic 

loaders to suit any operation. 

“With its powerful wrapping technology and ability to wrap 

up to a maximum bale weight of 1,600kg, farmers can rely on 

the EasyWrap 150 to balance efficiency and safety, while also 

maintaining maximum silage quality.” 

Thomas also says safety and convenience were “top of 

mind” for Krone when designing the EasyWrap 150. 

One feature added by Krone is a ground roller, which means 

the tractor does not have to lift the wrapper’s entire weight. 

“The ground roller makes it much easier for farmers to 

transport hay bales on slopes and hills – it also means 

farmers can wrap heavy bales with smaller tractors,” 

says Thomas. 

Krone says that the EasyWrap 150 has the world’s 

fastest single arm wrapping speed 

There is also a bale turner to safely place a bale on its end, 

a guide roller to improve guidance during wrapping and a 

film roll holder with external keypad to operate from outside 

the cabin. 

Mounting brackets hold up to four extra film rolls, while 

large bobbins improve bale control and ensure smooth 

rolling, particularly in sloping fields. 

John Deere’s collaboration with 

the University of Sydney will test 

its ExactEmerge row units on a 

100-hectare cotton field 

“That is important because your rate of loss accelerates 

greatly after the optimum window has passed, but with 

a high-speed planter, you can avoid missing that optimal 

planting window. This makes an enormous contribution to a 

farmer’s chance of achieving the highest crop yield possible.” 

The technology has been demonstrated at the University of 

Sydney’s Llara property, outside Narrabri in northwest NSW, 

where the 1850-hectare farm is used to produce dryland 

PLANTING 

New technology currently being trialled 

could see the speed of seeding double 

Need for speed 

John Deere is testing its ExactEmerge row units, which it 

hopes will increase planting speeds to 16km/h – double the 

typical speeds of standard planting. 

The manufacturer is testing the speeds as part of a 

collaboration with the University of Sydney, which will also 

include third-party validation. 

Once fully tested, John Deere hopes ExactEmerge 

will provide farmers with a quicker alternative while still 

maintaining accurate singulation, seed population, spacing, 

applied downforce and uniform depth. 

Able to integrate with both new and older planters, the 

ExactEmerge technology can be used on crops such as 

cotton, sorghum, sunflower and summer grains. 

John Deere Australia precision agriculture manager Benji 

Blevin says the collaboration with the university’s Institute of 

Agriculture will highlight the technology’s performance and 

its suitability for Australian conditions. 

“Growers are typically used to planting at 8km/h but what 

we want to show is, using ExactEmerge, they can achieve the 

same accuracy at double the speed,” says Blevin. 

“That ability to cover twice as many hectares as a traditional 

planter in the same amount of time has the potential to 

significantly shift the goal posts during the planting season. 

“When you can plant at 16km/h with the confidence that 

you’re not compromising seed placement, you are effectively 

increasing the optimum planting window. 

L-R: John Deere product specialist Anton Kowalenko, 

John Deere precision agriculture manager Benji Blevin 

and University of Sydney director of northern agriculture 

associate professor Guy Roth 

wheat, canola, chickpeas, faba beans and dryland cotton 

alongside cattle. 

Results of that demonstration, which tested the 

ExactEmerge system on cotton grown in a large-scale 

100-hecatre area, are still being finalised, but University of 

Sydney director for northern agriculture Guy Roth says the 

expected results look promising. 

“Growing crops is a combination of having good 

engineering, good agronomy and getting the timing right,” 

says Roth. 

“In this validation, John Deere provided the technology 

and we brought academic rigour to the agronomy and soil 

science, so it was the perfect opportunity to collaborate and 

conduct this large-scale validation study. 

“Using ExactEmerge, we were able to get a very good, even 

plant stand across all the treatments and soil types which is 

very important when planting cotton.” 


SEED DRILL 

Horsch has simplified the drawbar and 

integrated hydraulic lines into the frame on its 

Sprinter NT tine seed drill in response to the 

feedback of Australian customers 

Simpler tines 

Horsch has upgraded its Sprinter NT tine seed drill, adding 

features that the company says have been based on 

customer feedback in the Australian market. 

The German manufacturer’s popular piece of direct seeding 

equipment has received a new drawbar system, an extra set 

of tyres on each wing and upgrades to its air package and 

hydraulic lines. 

Jan Moens, service and training manager of Queenslandbased 

Horsch distributor Muddy River Agricultural, says 

the upgraded model has been “well received” since its 

introduction into the Australian market. 

“The Sprinter NT is something that Horsch really makes 

specifically for our market,” he says. 

“The last couple of years have really snowballed and [with] 

the more Sprinters you have out in the field, you come across 

things you discuss with the supplier and say ‘okay, maybe we 

can change this and that’. 

“We still have a five wing machine but instead of one set of 

wing wheels per side we have now changed to two, so we 

have an extra set of flotation tyres on the wings. 

“In combination with that, we’ve gone to a more simplified 

drawbar system, an A-frame with pivoting wheels on the 

front. 

“Some small modifications have been made, like a lot of the 

hydraulic lines have been integrated in the frame to make it 

look smarter and the air package has been upgraded a bit by 

using higher distribution towers. 

“Transport width has also been reduced dramatically to less 

than 6m.” 

The Sprinter NT, which has been in the Australian market for 

about eight years, is designed for high hectare output and 

has multiple size configurations. 

It is available in 12m and 18m working widths while the tines, 

which are arranged in three rows, can be spaced 10” (25cm), 

12” (30cm) or 15” (38cm) apart. 

There are no pins or bushes in the tine assembly, meaning 

the seed is placed in the furrow and firmed in the soil by 

press wheel. 

The Sprinter NT can also be paired with any of the 12,000L, 

17,000L or 21,000L carts. 

Lemken has released the Solitair 23+ front hopper 

GENERATOR 

Kubota expands diesel generator range 

Next 

generation 

Kubota’s two new generator models – the GL Series compact 

diesel generator and SQ Series (super quiet) diesel generator 

– have been designed with new features and can be easily 

transported and maintained. 

Kubota says the GL series is efficient and provides safe backup 

power as the 2021 summer storm season approaches. 

“As we approach the season, it’s important to stock up on 

generators,” says Kubota spokesperson James Tibos. 

“Sadly, we’ve seen the full impact storms can have on power 

supplies and Kubota’s GL series ensures back-up electricity at 

the push of a button.” 

While boasting a generous fuel tank that allows for 

extended operation time between refuelling, the GL Series 

offers improved fuel economy and reductions in both 

emissions and noise levels, says Kubota. 

Kubota’s upgraded generators, including the SQ series 

models, are available in its 2021 spring catalogue 

With factory-fitted circuit breakers and residual current 

device, the GL Series benefits from a redesign, making singleside 

maintenance and servicing a possibility. 

Designed with durability in mind, the SQ series generators 

offer operators a 24-hour operation time and the ability to 

withstand Australia’s harsh conditions. 

The new models have waterproof recessed button 

receptacles, as well as a new emergency stop button and 

residual current devices for each outlet, a battery isolator, a 

larger fuel tank and a limit switch that shuts down the engine 

when the door opens. 

“The SQ Series is Kubota’s largest diesel generator and gives 

you incredible power that you can rely on, day in, day out,” 

says Tibos. 

“They are the perfect partner for any application where prime 

power is required and are ideal to help weather any storm.” 

Both the GL and the SQ seriese also feature Kubota’s 

Deep-Sea 4520 Start Controller, which provides operator 

information in a back-lit, easy-to-read manner. 

The generators are listed in Kubota’s 2021 spring 

catalogue. 

SEEDING 

New seeding equipment from Lemken 

will do more for smaller tractors and more 

precise seed placement 

Hop to it 

Lemken says its new Solitair 23+ front hopper and 

OptiDisc 25 coulter bar will offer greater versatility 

and increased precision to buyers. 

The front hopper and coulter bar are now inclusive 

of ISOBUS technology, making adjustments easier 

and seeding more efficient through the MegaDrill 

control on the tractor terminal, allowing seeding 

without overlap of up to four width sections. 

Lemken’s Solitair 23+ front hopper, when combined 

with the Zirkon 12 and OptiDisc 25 coulter bar, 

delivers a better distribution of weight compared to 

rear-mounted systems and, along with its compact, 

agile drilling combination, allows smaller tractors to 

be used for efficient drilling operations. Both seeds 

and fertiliser are suitable for the Solitair 23+. 

The OptiDisc 25 coulter bar will also be available 

in five and six metre foldable versions, and three 

and four metre rigid versions, in addition to the 

four and 4.5m folding versions already available 

on the market. 

The new folding variants feature an additional 

transport system for road use capable of taking 

loads of up to 3.5 tonnes off he rear axle and can 

lock and unlock in just a few steps. 

At the heart of the OptiDisc 25 coulter bar is a 

proven parallelogram-controlled double disc coulter, 

which, along with depth control rollers, ensures 

seeds are placed precisely at the pre-set depth 

with both mulch and conventional tillage. 

The Solitair 23+ front hopper is available now, 

while the four and 4.5m OptiDisc 25 coulter bars are 

currently available and the five and six metre models 

will be available from January 2022. 


7

News 

CFMoto’s new UForce 600 has a 680kg 

towing capacity and 280kg cargo capacity 

UTV 

CFMoto’s new midsize utility task vehicle 

(UTV) is a lighter unit with a heavier towing 

capacity and more storage space 

Leaps and 

bounds 

CFMoto has added to its range of UTVs with a midsize 

model the company says is a “quantum leap” over its 

predecessor. 

The UForce 600 replaces the UForce 550 EPS and is 

lighter, more powerful, has greater towing capacity and 

a host of other improvements. 

“The UForce 600 is a massive addition to our Aussie 

UTV arsenal and we’re tremendously excited about 

its potential with all the updates such as the electronic 

engine braking and limited-slip rear diff,” says CFMoto 

Australia director Michael Poynton. 

“It’s the perfect machine for both work and play.” 

In addition to the updates mentioned by Poynton, 

CFMoto has also added a new front-end design, 

enhanced storage space, increased ground clearance 

and metallic paint. 

The UForce 600 offers 41 horsepower (31kW) and 

62Nm of torque (3hp and 1Nm more than the 550 EPS) 

and has a dry weight of 570kg, which is 42kg lighter 

than the 550 EPS. 

It has a 680kg towing capacity and 280kg cargo 

capacity. 

Standard features include electronic power steering, 

a rollover protection system-approved cage, work and 

normal drive models and 30cm aluminium wheels. 

Another new addition is a larger bench seat, which 

cleverly has almost 100L of storage underneath. 

The UForce 600 is now on sale from CFMoto dealers 

and carries a drive-away price of $13,490. 

TRACTOR 

The new Case IH AFS Connect Magnum 

provides enhanced performance and 

productivity at touch of a button 

Finger click 

South Australian farmer Matt Davey, who runs 

Kalimar Ag in Kadina on the Yorke Peninsula, 

trialled the Case IH AFS Connect Magnum tractor 

before its official launch into the Australian market 

late last year. 

Key to the new tractor series is the AFS Connect 

portal, which gives the operator a view of the field 

operations, fleet information and agronomic data 

from their preferred device. It also allows for the 

sharing of this information with trusted third 

parties, such as dealers and agronomists. 

“They’ve done a lot of good things inside with 

regards to the new-look cab and I really liked the 

new screen,” says Davey. 

“Its features are impressive and there’s so 

much more programming you can do in it as 

well, with more options, and it allows for so 

much customisation. 

“There are also numerous features that would 

benefit less experienced operators, potentially 

providing farm businesses with more options 

when it comes to available labour.” 

Inside the cab, the operator benefits from a Multi- 

Control armrest with configurable remotes, a Multi- 

Function handle with four programmable hot key 

buttons, an encoder knob and an upgraded screen. 

Davey says that a standout for him with the AFS 

Connect Magnum was the ease with which he 

The AFS Connect Magnum series has a high level 

of customisation available to adapt the machine 

to different task 

could easily change the functions assigned to 

the buttons. 

“When I was spraying, I had them set up as 

different engine speed buttons, and I even had one 

button programmed to answer the phone. When I 

went back to my old tractor, I kept looking for that 

button; it was great. With the Multi-Control handle 

you don’t have to move your hand, all the functions 

you need at the time are right there.” 

The AFS Connect Magnum series is available in 

Rowtrac and four-wheeled configurations, from 

250 horsepower (186kW) all the way up to 400hp 

(298kW) – the first time a 400hp option has been 

offered in the Magnum range in Australia. The 

tracked units are available for 340–400hp (254– 

298kW) models, while wheeled machines go from 

250–400hp. 


GET USED 

TO BEST IN CLASS 

When it comes to Agricultural and Forestry land clearing, FAE has been 

the top choice for rock crushers, stump grinders, forestry mulchers and tillers. 

FAE supplies models to suit a variety of heavy duty applications with a wide 

range of tractor horsepower. 

Contact us: 

1300 981 337 / +61 3 9706 4088 

or email info@fae-ap.com.au 

fae-group.com

News 

Images are taken by drone to generate a 

map of the area that needs spraying 

We don’t want 

people to think 

it’s a drone-based 

sprayer 

SPRAYER 

Sprayer manufacturer Hardi has taken a big step into the 

technological space, launching a selective spraying system, 

which it claims could reduce chemical use and costs by up 

to 90 per cent. Lincoln Bertelli reports 

Centimetre perfect 

. Hardi says that chemical use, labour and wastage can 

be reduced by up to 90 per cent with GeoSelect 

Hardi’s newest innovation, GeoSelect, marks the 

company’s “first step into genuine technology” with 

a software package that works in tandem with drone 

images to identify and spray exactly where weeds 

are on a paddock. 

It uses a “decoupled” structure, meaning the 

images are taken by drone before being processed 

quickly without loss of resolution and delivering a 

precise map of which areas require spraying. 

Multiple lightweight antennas, described as 

“rugged and waterproof”, are mounted along 

the sprayer’s boom to ensure precision to the 

centimetre when spraying, even factoring in 

boom deflection and weather conditions. 

Crucially, GeoSelect works with standard Hardi 

spray nozzles. 

GeoSelect was unveiled in Adelaide in July and 

Hardi Australia’s chief executive Bill Franklin said 

at the launch the technology had been the result of 

several years’ effort. 

“We don’t want people to think it’s a drone-based 

sprayer,” he said. 

“The drone is the means of capturing the 

image. GeoSelect is pure software. Our guys 

have written software to overcome barriers which 

existed previously. 

“It identifies the precise geolocation of target 

vegetation and records that, so you get full recording 

of every activity and it preserves the original spatial 

resolution.” 

Franklin said the decoupled structure, with 

imaging and spraying being separate, had numerous 

advantages that had not been obvious when Hardi 

first set out to create the software. 

“Some of those arise from knowing exactly 

what there is to spray before you’re in the paddock,” 

he explained. 

“When you’re there with a camera, you’ve got to 

drive past it before you know it is present. 

“By taking the images before then, we know 

exactly where the targets [are] and we know 

how many targets are in the field so we can 

thereby work out how much chemical we’ve 

got to take on.” 

Other advantages, Franklin said, included 

knowing in advance which areas did not require 

treatment and therefore saving on labour, fuel, 

ground compaction and machine depreciation. 

The company estimates that chemical use, labour 

and wastage can be reduced by up to 90 per cent 

with GeoSelect. 

In a field test run by Hardi, live data was processed 

with up to 5mm accuracy and a 99.7 per cent hit rate. 

Boom deflection can also be measured down 

to the nearest 0.1 degree and Franklin said this 

precision was crucial for GeoSelect’s success. 

“If you’re running a 48m boom or bigger you can 

get quite substantial deflection,” he said. 

“Where your traditional sprayer thinks your boom 

is compared to where it actually is might be something 

completely different. 

“GeoSelect measures that accurately – it has 

additional GPS sensors along the boom to give 

you precision and accuracy in terms of where 

the nozzles actually are at the point of firing. 

“When we showed it to our own sales guys to start 

with, they didn’t believe we could get the nozzle 

response times we are actually getting. 

“Latency in firing is automatically calculated, we 

can take in and consider other ambient measurements 

and metrics such as winds and cross-winds, 

and all of that is processed within the algorithm and 


News 

Knowing exactly 

what there is to spray 

before you’re in the 

paddock 

machine adjustments are made.” 

GeoSelect can retain its accuracy even at 

standard speeds of between 25 and 30km/h, 

while it can also run effectively at night. 

Data files come straight from the drone, Hardi 

says, and by not using shape or vector files they can 

quickly be compressed to just a few megabytes and 

transferred via a standard phone network. 

“It’s about overcoming the barriers that previously 

existed to delivering the technology,” said Franklin. 

“That enables it to not compromise the resolution. 

It retains very clear images of very small weeds, 

whereas previously you would lose that clarity. 

“We can also process very comfortably images 

from 1,000ha a day and capture and retain metadata 

for later use.” 

Hardi will initially release GeoSelect on its 

self-propelled sprayers only. 

It is expected to become available in either 

the final quarter of 2021 or first quarter of 2022, 

depending on supply challenges such as the global 

microchip shortage. 

GeoSelect will be sold through Hardi’s traditional 

dealer networks. 

Hardi’s GeoSelect software takes information from the 

drone and adapts the sprayer’s response to specifically 

target weeds . Additional GPS sensors along the boom 

increase precision and accuracy 

european quality & performance 

GREAT VALUE 

TMU 1850 MULCHER 

$9,995 

STAR 350 RAKE 

$6,990 

ZLC 1300 ROTARY HOE 

$3,520 X1500 

$7,590 

60-100HP LOW BODY MULCHER 

Prunings mulchers for orchards, contractors 

and mowing. Openable rear door 

FAST CLEAN RAKING 

Tandem axle, closed cam track, pivoting 

headstock, removable arms 

ROTARY HOE 

15-25hp, adjustable depth skids, 

adjustable rear leveling door 

BEST VALUE LINKAGE SPREADER 

Dual stainless steel spreading discs & 

vanes, certified spreading to 18 metres, 

stainless steel shields 

ZTS 1800 MULCHER 

$11,300 

SM FINISHING MOWER 

$3,548 

RP HAY RAKE 

KYLO 3000 

$22,990 

70-120HP HIGH BODY MULCHER 

Double skin for strength, openable rear 

door, Y and centre blade, adjustable skids 

SIDE & REAR DISCHARGE 

3 overlapped cutting blades, 4 height 

adjusting castor wheels, 4mm steel body 

SIDE DELIVERY HAY RAKE 

Simple to use low-cost raking, for 

spreading, turning and raking 

CONTRACTOR LINKAGE SPREADER 

Spreading computer, integrated load cells, 

dual stainless steel spreading discs & 

vanes, certified spreading up to 36 metres 

The Farmliner brand has been a firm Aussie favourite since 1980, when Farmliner 

tractors were first introduced to Australia. Forty years later, Farmliner is synonymous 

with great value farm equipment that will stand the test of time. 

Offer ends 31st Aug 2021. While stock lasts. Pictures for illustration purposes only. 

Pricing excludes dealer delivery charges. Ask us about Inlon Finance. 

For more information and 

your nearest dealer 

1800 849 090 

Farms & www.inlon.ag/722 

Farm Machinery 11

News 

Stockyard managing director Lachie Hart 

(left) and CommBank director specialised 

agribusiness solutions Andrew Quinn 

FINANCE 

Stockyard Group’s new deal with Commonwealth 

Bank (CBA) will see it pay lower interest if it hits 

emissions and safety targets 

Banking on it 

They say virtue is its own reward, but for Queensland 

beef producer Stockyard Group, meeting targets in 

emissions, worker safety and animal welfare could 

pay off n the monetary sense. 

The company has entered into a sustainabilitylinked 

loan (SLL) with CBA, with the bank to charge 

lower interest if certain metrics are met, in what 

both groups are saying is a first for Australia’s 

agriculture industry. 

While details of the three-year loan have not 

been released, CBA says the arrangements set 

out clear parameters that will see the SLL stretch 

towards sustainable outcomes “significantly beyond 

its existing, strong baseline performance”. 

“The deal ties the facility pricing to five metrics, 

grouped into three sustainability performance 

targets, including: reducing Scope 1 and 2 greenhouse 

gas emissions; improved animal welfare 

outcomes; and workplace health and safety 

innovations,” says CBA. 

CBA group executive for business banking Mike 

Vacy-Lyle says the deal demonstrates its ability to 

develop innovative finance solutions. 

“We know many farmers across the country are 

already adopting best practice sustainability and 

environmental stewardship, and we want to partner 

with agribusinesses to help them innovate and 

accelerate transition plans,” he says. 

The bank signed its first sustainability loan earlier 

this year with Celsus, the commercial (non-clinical) 

operator of Royal Adelaide Hospital. 

Stockyard managing director Lachie Hart 

says CBA’s new loan structure incorporates 

Stockyard’s commitment to doing better for their 

people, animals, environment and community. 

“We have welcomed the opportunity to 

participate in this innovative financing structure 

and make a commitment to tie important 

sustainability targets to our financing costs,” he says. 

“To us, as a third-generation family business, it is 

our responsibility to pass on a viable, responsible 

and sustainable business for future generations and 

this loan will allow us to utilise interest savings to 

ensure this is the case. 

“It also provides opportunities to access internationally 

recognisable ESG [environmental, social 

and governance] credentials to assist with securing 

capital and customers in the future,” says Hart. 

SCAN ME 

T3 Traymount 

300L 

$ 

4195 

GA6500008 

SCAN ME 

Linkage 

From 

$ 

4595 

(No boom) 

FFM-HH-5190090-CS-401 

SCAN ME 

SCAN ME 

Prairie Compact 

600L (no boom) 

$ 

6795 

GA6500017 

Spotmate Trailer 

100L 

$ 

1250 

GA6500014 

12 Farms & Farm Machinery 

goldacres

"It’s amazin what that 

little tractor can do, but 

what do ou expect? 

It’s a John Deere!" 

Jeff, Oakey, Qld 

Vanderfield has always been there for Australian agriculture since 1963. 

A lot has changed since then, but not our commitment to our customers and their machinery. 

Learn more about why Jeff loves his John Deere equipment at vanderfield.com.au/always 

Always with you 

FFM-FP-5011726-CS-401

Cover story 

Perfect match 

With new designs developed specifically for poultry, piggeries, cotton and hay, 

Dieci’s range of specialty telehandlers are built tough for Australian requirements 

A 

Manufactured in Italy and engineered locally to 

meet the needs of Australia’s diverse agricultural 

sectors, Dieci’s specialty telehandlers are built to be 

tough and reliable. 

Dieci works every day to evolve its machines, 

adopting the best solutions based on research, 

advice and customer experience. 

This consistent exploration has resulted in a 

range of industry-specific telehandlers for poultry, 

cotton, piggeries and hay – all of which are designed 

with impressive attachments and features to suit 

even the harshest of Australian conditions. 

Using hydraulically-operated telescopic booms to 

transport, lift nd position light to heavy loads, Dieci 

telehandlers can perform various jobs using the 

one vehicle. Unlike normal tractors with front lifting 

systems, these machines have far greater reach, 

hydraulic capacity and manoeuvrability. 

With lift eights ranging from 5.8 metres to 9.6 

metres, the characteristics of Dieci’s specialty range 

can be summarised in three concepts: technology, 

reliability and durability. 

Whether you are picking up birds or cleaning out 

sheds, the 2.5-tonne Poultry Pick-up and threetonne 

Poultry Pro models are guaranteed to help 

you get the job done. 

These machines are designed to specifically meet 

the needs of the industry with a number of features 

that make them ideal for use in hot poultry sheds. 

With smaller wheels to help operators navigate 

more efficiently, the compact design of these 

vehicles allows them to fit into sheds and under the 

gantries, typically used for feeding and watering 

birds in their specially protected halls. 

Along with a custom-designed air filter system, 

Kubota diesel engine, double reversing fan, rollover 

boomhead for efficient bucket emptying and 

LED lights designed to avoid startling poultry, the 


Poultry telehandlers set the standard for reliability, 

safety and operator comfort. 

The Piggery Pro model offers similar features 

to the Poultry Pro. An engine monitoring system 

with shutdown protection, reverse radiator fan and 

improved airflow to keep the engine bay clean, 

further add to the functionality of this vehicle. 

The introduction of big, square hay making 

balers, although popular with farmers, presented 

the new problem of handling and storing big and 

heavy packages. 

A truly universal machine with extreme digging 

and pushing abilities, the Dieci Haymaster 40.7 

makes light work of hay handling and fodder. 

With a four-tonne maximum capacity and a lift 

height of seven metres, the Haymaster features an 

impressive rear-mounted radiator, hydraulic cooler 

and ‘Easy Ride’ boom suspension. 

Last but certainly not least, the heavy-duty 

Cotton Pro 70.10 is a no-fuss, reliable workhorse 

with a four-cylinder Tier 3 FPT engine that is easy 

to maintain and service. 

C

Cover story 

Every single 

telehandler can also 

be customised to suit 

customer needs 

B 

As the name suggests, the 70.10 has a seven-tonne 

lift apacity and maximum reach of 9.6 metres. This 

model is ideal for cotton handling tasks such as combining 

bales of raw cotton, or spearing bales. 

Dealing with such fibrous material needs some 

consideration, therefore a tropical cooling system, 

designed to shield the inter cooler from cotton, 

debris and dust has been added to this model, 

along with heat shields around the exhaust pipes 

to reduce the risk of overheating or fire hazard. The 

oil cooler is also mounted to the rear of the machine 

behind the cab. 

The Haymaster and the Cotton Pro are both 

equipped with side-shift on he boom that allows 

the operator to shift he carriage from side to side to 

tightly pack loads. 

Dieci says that customers appreciate the fact that 

they can move a bale from the front to the left or 

right side in small increments without having to 

move the whole machine. 

BUILT TO LAST 

The company takes pride in building machines with 

the best components and a heavy-duty chassis that 

will last the distance. 

Reliability is guaranteed, with reinforced booms 

made of high resistance steel, while load sensing 

and flow sharing distributors allow for more 

simultaneous movements during operation. 

Dieci’s models are equipped with hydrostatic 

transmission, which guarantees power, reactivity 

and control in manoeuvres, while a single control 

unit measures the optimal working parameters 

through in-depth diagnostics, displaying them in 

real time. 

Every single telehandler can also be customised 

to suit customer needs, thanks to a wide choice of 

attachments, including forks, buckets, jibs, clamps 

D 

for big bales and lifting hooks, and so much more. 

The standard for operator comfort across 

Australia’s demanding working environments is 

met with Dieci’s rollover protection system and 

falling object protection system-approved cabs. 

Each telehandler’s third-generation cabin is 

cooled by an advanced, Australian-designed 

air conditioning system, making work in harsh 

climates far less taxing. 

A roomy interior, luxurious air seats, 360-degree 

views and excellent thermal and sound insulation 

further add to the comfort and functionality of 

these vehicles. 

Dieci telehandlers excel when it comes to 

maintenance, with the company consistently 

finding new ways to make serviceability easier, 

thanks to its more than 50 years of experience 

in the sector. 

Access to the engine is made easy with 

the optimal arrangement of components 

A 

The Dieci Haymaster 40.7 has a four-tonne 

maximum capacity and a lift height of seven 

metres 

B 

The Cotton Pro has a four-cylinder Tier 3 FPT 

engine that is easy to maintain and service 

C 

The heavy-duty Cotton Pro 70.10 can be used for 

combining bales of raw cotton 

D 

The three-tonne Poultry Pro is designed 

for poultry sheds – these telehandlers set 

the standard for reliability, safety and 

operator comfort 

that make maintenance quick and convenient. 

Radiators are straight forward and fast to clean, 

and air filters can be reached without any tools. 

The interventions required for the change of 

hydraulic oil are also minimal, as they are only 

necessary every 2,000 hours of operation. 

Dieci Australia heavily invests in safety, 

therefore each telehandler has been manufactured 

to meet local design and compliance standards. 

The company employs an independent external 

engineer who signs off on very new machine or 

attachment that comes out, including attachments 

developed by the Australian operation. 

Dieci’s range of specialty telehandlers is available 

across Australia through the Dieci Australia 

dealer network. For more information, contact 

Dieci Australia on 1300 888 479 or visit: 

www.dieciaustralia.com.au. 


15

News 

JDLink for John Deere machinery owners will 

now be a free data upload service 

DATA 

John Deere ends subscription fees for 

JDLink data transfer 

Subscription 

free 

John Deere’s data collection technology, JDLink, will 

now be available for users at no ongoing cost, the 

machinery manufacturer has announced. 

First introduced in Australia in 2011, JDLink facilitates 

automatic data transfer from a machine to the John 

Deere Operations Center – which company precision 

agriculture manager for Australia and New Zealand 

Benji Blevin says will give farmers several automotive 

benefits, especially with regard to precision 

agriculture. 

“When machinery is connected to JDLink it 

automates the flow of on-farm and machinery data. 

This means farmers can focus on what is most 

important, and that’s managing their farm,” he says. 

“By automatically transferring machine and in-field 

data to the Operation Center, farmers can have almost 

immediate access to the key data they need on their 

machines and their people in the palm of their hand. 

“At harvest, for example, they can see their work 

totals coming through from the paddock, review 

the progress being made and even adjust machine 

settings in near real-time. So, with this technology, 

not only are they are ensuring a job is being done, 

they have ultimate quality control, to ensure the job 

is being done properly.” 

Up until now Deere dealers had managed their 

customers’ connections to the subscription service, but 

under the new system customers will be able to control 

individual machines or their entire fleet through the 

John Deere Operations Center. 

JDLink also gives users access to John Deere 

Connected Support and remote display access, 

enabling dealers to access the in-cab display of a Deere 

machine to help them troubleshoot and solve potential 

issues from afar. 

Blevin says the announcement will put JDLink into the 

hands of more customers to give them greater insight 

into their machinery and their business. 

“At the end of the season, if you can’t measure it, you 

can’t manage it,” he says. 

“Having all machines connected through JDLink 

allows equipment to capture information at every 

opportunity, and every piece of data collected can be 

used for analysis to make sure better decisions are 

made going forward. 

To access JDLink’s full range of functionalities, 

farmers will require a 3G or 4G JDLink MTG (modem). 

For farmers with older John Deere equipment, a 

system upgrade can be purchased and installed. 

PRECISION AG 

Agco has launched a pilot of a new 

streamlined precision agriculture support 

system in North America, with a broader 

rollout planned for next year 

Pilot season 

Agco has launched a pilot of its Precision Ag Line 

(PAL) package in North America, trialling a system 

it says will help its farming customers with mixedfl 

et operations. 

PAL will be available for farmers operating with 

any Agco-branded equipment and machinery, 

including Fendt and Massey Ferguson, offering 

access to precision agriculture expertise so they 

can achieve more efficient solutions and improved 

outcomes in the field. 

PAL is also compatible with Agco equipment 

when used in conjunction with machinery and 

equipment from other manufacturers. 

The program uses Agco’s AgriSync platform, 

which aligns farmers with the dealer’s current 

support system; usually an existing customer 

service number, to streamline access to the service 

and achieve a coherent experience for farmers. 

PAL technology is currently in its pilot stages in 

several locations in North America, where trials 

have heralded promising results. 

Following completion of the pilot program, Agco 

plans to expand the program into new areas in 2022. 

Agco spokesperson Cody Light says the 

Agco’s Precision Ag Line technology is 

currently being trialled 

complicated nature of precision ag can be alleviated 

through the use of PAL. 

“Precision farming techniques can become 

complicated, especially when products from 

multiple manufacturers are used to accomplish 

them,” says Light. 

“PAL puts farmers in direct touch with our 

technical experts who are very experienced at 

aligning disparate systems into effective processes. 

“This program is directly aimed at ensuring 

our customers have the best farming outcomes 

and exceptional customer experiences with our 

products along the way.” 


SEEDING 

Väderstäd celebrates the 30th anniversary of 

its Seed Hawk precision seeding system 

Ruling the roost 

Developed by Canadian farmers in 1991, the Seed 

Hawk concept first made its way to Australia 13 

years later. 

Since then, it has become a popular product in this 

market, with more than 750 units in use across the 

country and Australia accounting for about 25 per 

cent of global Seed Hawk sales. 

The first complete Seed Hawk tool bar was 

imported into Australia in 2004 by New South 

Wales farmers Ambrose and Lisa Doolan. 

They used it in their zero-till cropping system 

before establishing their own distribution business 

and exhibiting at field days in their home state. 

After Väderstäd acquired the Seed Hawk’s international 

distribution rights, it was the company’s UK 

managing director Tim Needham who provided the 

ingenuity after moving to Brisbane. 

Assigned the job of developing the Väderstäd 

brand in Australia, Needham realised that transporting 

a full-scale unit across the country to 

showcase it would be impractical. 

Instead, he got to work on a 2.5m-wide unit that 

featured 10 Seed Hawk openers, on-board seed and 

fertiliser tanks, hydraulic metering, a 25 horsepower 

(19kW) Honda engine and, crucially, mounting the 

seeder on a standard trailer frame and couplings, 

which meant it could be towed by a 4WD. 

“The whole thing was made in my garage – the 

neighbours wondered what on earth was going on,” 

he says. 

“When we finished it, I had to take it down to the 

RTA to get it registered and their engineers didn’t 

know what to make of it.” 

This unique demonstration rig drove across 

Australia several times and drew plenty of interest 

from those who saw it along the journey. 

Another big moment in Seed Hawk’s Australian 

growth was when Väderstäd appointed Landpower 

as the product’s Australian distributor. 

“We went from having six dealers to 15 overnight – 

and now we have nearly 30 – and this had an 

obvious impact on sales,” says Needham, who is 

now Landpower’s general manager – product. 

The Seed Hawk is available in eight working widths 

between six and 26 metres 

The Seed Hawk is available in eight working 

widths between six and 26 metres, with row 

spacing options of 25cm, 30cm and 35cm. 

It is split into three series – the XL, 45 and 30 – 

which fold to transport widths of 8.6m, 4.5m and 

3m respectively. 

The Seed Hawk, along with all Väderstäd 

products, is distributed in Australia by 

Landpower via Claas Harvest Centres and 

independent dealerships. 

new 

60 hp tractor 

4 CHOICES WITH 

LOADER FROM 

$41,200 

get ready for spring 

OFFER ENDS 31ST AUGUST 2021 

WHILE STOCK LASTS 

t613 manual features 

• Air-Con Cabin or 

Folding ROPS 

• 12 speed with shuttle 

• 4 cylinder diesel engine 

for power and torque 

• 1,500kg 3 point linkage 

for a large range of 

attachments 

• Flat operator’s platform 

for unobstructed access 

• 4-in-1 bucket with 

Euro hitch 

KOREAN 

This little rippa 60hp utility tractor including loader and 4-in-1 bucket is full of features. The quiet engine is a 

real performer and the low NVH makes it a pleasure to operate. Tight turning circle for great manoeuvrability. 

Dealer delivery charges apply. Ask us about Inlon Finance. # Subject to eligibility. 

Quality Made in Korea. Great value tractors packed with generous 

features. Tractors from 19 to 100HP, made strong for the Australian farmer. 

t613 hst features 

• Air-Con Cabin or Folding ROPS 

• 3 range hydrostatic 

transmission 

• Side-by-side HST pedals 

• Auto-throttle control for easier 

HST driving 

• 4 cylinder diesel engine for 

power and torque 

• 1,500kg 3 point linkage for a 

large range of attachments 

• Flat operator’s platform for 

unobstructed access 

• 4-in-1 bucket with Euro hitch 

For more information 

and your nearest dealer 

1800 849 090 

www.tym.ag/727 

Farms & Farm Machinery 17

News 

nue 

REPAIR 

Mods not so hot 

Modifications to farm equipment should not be treated in the same way as a farmer’s right to 

repair, the Tractor and Machinery Association of Australia says. By Anthony Wingard 

A round-table discussion between the National 

Farmers’ Federation (NFF), the Tractor and 

Machinery Association of Australia (TMA) and 

other relevant parties will soon be underway as the 

agricultural sector aims to find a solution on farmers’ 

and repairers’ right to repair. 

TMA executive director Gary Northover says 

the discussions will aim to achieve a ‘final position’ 

between all parties, including concerns raised by 

the TMA on the matter. 

“We’ve begun the process of reaching out to the 

NFF, for instance, to develop a bit of a round-table 

working discussion around this so that we can 

hopefully develop some guidelines which might be 

applied to the standards and expectations that the 

market is looking for,” says Northover. 

“It’s certainly early days but it’s a path that both of 

us believe we wish to pursue. So, we look forward 

to working the NFF, the Productivity Commission 

and also the ACCC [Australian Competition and 

Consumer Commission] in just trying to get that 

balance right.” 

The discussions are set to take place following 

reports released by both the Productivity Commission 

and ACCC earlier this year, which investigated 

the growing number of barriers facing farmers 

wanting to repair their own equipment. 

Both reports highlighted several challenges 

for farmers wishing to complete their own 

maintenance themselves or through a thirdparty 

machinery repairer. 

The ACCC report also called for more 

independent competition in the repair market 

as well as alterations to the current warranties 

issued on agricultural machinery. 

In response, the TMA outlined its stance in a 

statement of principles that referred mainly to the 

need to differentiate between the rights of farmers 

or third-party repairers to repair machinery and 

their right to modify that machinery. 

Modification, as outlined in the TMA’s statement 

could refer to: resetting immobiliser systems; 

reprogramming electronic processing or engine 

control units; changing equipment or engine 


settings and downloading or accessing the source 

code of machines. 

Speaking to Farms & Farm Machinery, Northover 

says it was imperative to differentiate between 

the two. 

“We certainly recognise the issue of right to repair 

and we do support farmers’ ability to maintain and 

repair their own equipment,” he says. 

“There are a couple of key issues. One is the 

difference between the right to repair and the right 

to modify. 

“We’ve issued some statement of principles that 

we think is a starting point on that road to highlight 

the sort of things we think third party repairers 

ought to be able to do under the right to repair and 

the things that may fall under the right to modify. 

“That was part of our submission to the ACCC, 

but we felt that was a distinction that needed to 

be made.” 

In relation to the right to modify in the Australian 

agricultural machinery industry, however, the 

ACCC report explicitly states: “We have not received 

evidence indicating that this practice is widespread, 

or that it is a significant motivation for independent 

repairers.” 

That said, it did confirm some submissions had 

raised concerns about the increased possibility 

of software modification should independent 

repairers have access to diagnostic software and 

other technical data. 

That notion has been refuted by the TMA, which 

suggests the practice of modification by third-party 

repairers is in fact widespread and was the main 

reason why it objected to recommendations. 

“It is prevalent and we see many examples where 

engines are being chipped to perform beyond the 

stated capacity. If you look at what is happening 

elsewhere in the world as well, this is not just an 

isolated example,” says Northover. 

“Machines being chipped can mean they perform 

above their stated capacity, involving sometimes 

disengaging the environmental management 

equipment, [which] can lead to safety concerns as 

far as we are concerned. 

“So, while the ACCC might not have called out the 

right to modify as a risk as such, we know that it is. 

Our members are conscious of their obligations to 

ensure that machines are operated safely.” 

DEALER CONCERNS 

Northover also raised several other concerns 

relating to right to repair and right to modify, such 

as the level of training required to perform such 

maintenance. 

Currently, while specific training and experience 

varies between manufacturers, technicians are 

required to at least complete specific vocational 

TAFE courses that are available in many regions 

across the country. Bigger manufacturing brands 

also invest in factory-based training for the technicians 

as well as sophisticated training departments 

in dealerships. 

Northover says a shortage of technical labour 

in regions and the economic role of the dealer 

across the country should also be considered 

when discussing the right to repair. 

“Walking down the path to right to repair, we 

just want to make sure the industry understands 

the standards necessary to deliver the minimum 

quality of service and make sure the machines 

are performing satisfactorily and it doesn’t lead to 

knock-on consequences down the track,” he says. 

“When the third-party repairer isn’t up to the task, 

so to speak, the cost is then up to the customer. 

“I know some examples I have heard recently of 

only half of positions were advertised last year got 

filled and if you apply that across the industry, there 

is a distinct shortage of technical labour out there. 

“I think the thing to consider as part of all of this 

is the role the dealer plays. The dealer has invested 

a lot of money in developing their businesses. 

In many instances, they are probably the biggest 

employer in most of the regional towns that they 

are in.” 

The Productivity Commission is set to hand down 

its final report to the federal government by October 

29, including a number of recommendations for the 

future of agricultural machinery in Australia.

www.elhoaustralia.com.au 

IMPORTED BY COLAC AGRICULTURAL COMPANY PTY LTD, VICTORIA 

Ph. 03 5231 6999 Email: sales@colacag.com.au 

SIDELINER 1790 PRO WRAPPER 

DC2100S FORAGE HARVESTER 

V-TWIN BASKET RAKE 

MOWERS AND RAKES 

- STEEL ON STEEL CONDITIONING ROLLERS 

- RUBBER CONDITIONING ROLLERS 

TWIN ROTOR RAKES 

SINGLE ROTOR RAKES 

BASKET RAKES 

For more information contact: Ph. 03 5231 6999 Email: sales@colacag.com.au 

Or visit our website at www.samaszaustralia.com.au 

IMPORTED BY COLAC AGRICULTURAL COMPANY PTY LTD, VICTORIA 

FFM-FP-5012885-CS-401

News 

The University of Queensland and InterGrain are 

researching ways to boost the root systems and 

improve yield sustainability of barley 

It is about validating 

what is the best for each 

unique soil profi e and 

environment 

Root cause 

A four-year research project will try to determine the perfect 

barley root shape for varying soil profiles across Australia 

Researchers at the University of Queensland (UQ) 

have teamed up with barley breeder InterGrain 

to investigate ways of boosting root systems and 

improving yield sustainability for Australia’s second 

most popular grain. 

With a total budget of $780,000, the four-year 

project will use cutting-edge technology to 

analyse root traits and fast-track barley breeding 

for diverse production environments across most 

Australian states. 

Co-funded by an Australian Research Council 

Linkage grant, the project will be conducted in 

conjunction with Australian National University 

(ANU), as one of 65 awardees in a $30 million grant 

round first announced in April. 

University of Queensland associate professor 

Lee Hickey is heading up the project, and says the 

research will provide the agricultural industry with 

vital information it wouldn’t have been exposed 

to before. 

“For a century, plant breeders have focused 

on what happens above the ground in terms 

of adapting crops to diverse production 

environments,” says Hickey. 

“Barley breeders have traditionally focused on 

breeding for traits that are visible such as plant 

height and flowering time. 

“Over the years, important root traits could have 

been inadvertently selected, but there may be a lot 

more we can achieve.” 

Hickey says a deeper root system will improve 

access to moisture during dry seasons on farms 

with deep soils, whereas more vigorous root growth 

in the upper soil layers could be advantageous 

for crops grown in shallow soils reliant on rainfall 

during growing seasons. 

InterGrain barley breeder Dr Hannah Robinson 

says the research will focus on creating an “optimum 

root shape” for varying soil profiles across Australia. 


This, she says, will help improve water and 

nutrient extraction – and ultimately yield – in 

Australia’s variable and changing climates. 

“It is about validating what is the best for each 

unique soil profile and environment, then breeding 

varieties with optimised root systems adapted to 

those environments across Australia,” she says. 

Among the methods researchers will use to better 

understand the crop is remote sensing technology, 

including drones fitted with multi-spectral cameras 

that will measure traits not visible to the naked eye, 

including canopy temperature and indications of 

how much water the crop is using. 

Drone data will then be matched with soil coring 

samples from the field, providing the research team 

Prof Lee Hickey and Dr Hannah Robinson holding barley 

varieties with different root system 

with a better understanding of the relationship 

between canopy traits and root traits. 

Researchers will also use the CRISPR genomeediting 

technology help researchers target the 

key genes that influence root system development, 

helping them engineer novel genetic variation. 

“If we can successfully harness the new 

technologies to improve root systems in barley, 

this approach could also be used in breeding 

programs for other major cereals such as wheat 

and oats. Understanding the value of different 

root traits is key,” Hickey says.

GERONIMO FARM 

EQUIPMENT 

LAND 

ROLLER 

SERIES 

READY TO ROLL. 

Harvest your crops worry free. Promote even germination. Crush crop residue. 

The Land Roller series applies uniform weight and surface contact across your fields, 

pushing rocks into the ground and leveling out clumps. The resulting smooth surface 

provides even germination, faster spraying, robust crops, and a trouble-free harvest. 

2 

4 

3 

1 

LAND ROLLER FEATURES 

1 - Large Diameter Drums. 

Larger drums provide an ideal combination of weight and 

size to smooth the field without compaction. 

2 - FORWARD Unfolding System. 

The patented unfolding system goes from transport to field 

mode in minutes while moving forward. 

3 - Shorter Drum Segments. 

Each drum floats independently, applying consistent ground 

pressure and following the contours of your land. 

4 - Pull Equipment in Tandem. 

The FORWARD TM Unfolding System allows you to pull two or 

more pieces of equipment in tandem, so you can work faster. 

MADE TO WORK. BUILT TO LAST. 

RM6710171 

Ashley Webster 

Ph: 0407 431 566 

Head Office - 77 Pridham Street, Cowra 

Office Number: 02 6341 3369 

Email: sales@geronimo.com.au 

Web: www.geronimo.com.au 

Chris Sweeny 

Ph: 0417 537 482

News 

Due to China increasing tariffs on Australian wine, 

alternative markets are required in order to offset 

potential losses in revenue 

Bitter notes 

Australia must find new wine markets to avoid significant losses over 

the next five years due to Chinese wine tariff , new data shows 

Aussie wine grape growers are set to lose $67 million 

annually unless new export markets are found for 

Australian wine, according to new data released by 

the Australian Bureau of Agricultural and Resource 

Economics and Sciences (ABARES). 

The finding comes with the release of a new 

ABARES report Australian Wine in China: Impact of 

China’s Anti-dumping Duties, which investigates the 

impacts of China’s punitive anti-dumping measures 

on Australian wine exports. 

Additional duties were temporarily introduced 

last year before the Chinese Ministry of Commerce 

confirmed it would place the tariffs, which range 

from 116 per cent to 218 per cent, on Australian wine 

for five years from March 28. 

The Chinese government says its actions are in 

response to the Australian government subsidising 

Australian winemakers, and allowing them to sell 

wine below the cost of production – a claim both 

winemakers and the Australian government 

have disputed. 

ABARES executive director Jared Greenville says 

the duties will cause China’s imports of bottled 

wine from Australia to cease entirely. 

“We expect that only 60 per cent of wine destined 

for China will find a place in our other existing 

markets by 2025, unless we make the effort to find 

alternative markets or do things differently,” says 

Greenville. 

“While Australia exports wine to over 100 

countries, the Chinese market was the largest 

in both export and volume for bottled wine, 

accounting for 40 per cent of export value 

share and 24 per cent of export volume share.” 

Action is needed today to find new markets for 

Australian wine, he adds. 

“Without growing existing markets or finding new 

ones, the export value of Australian wine in 2025 is 

expected to be $480 million lower. The total cost 

of the anti-dumping measures could be at least 

$2.4 billion over a five-year period,” he says. 

“For wine grape growers, the loss of production 

would be $67 million annually. This represents 

annual losses of $11 million in the Riverina, $11 

million for the Victoria-North West region, $23 

million for South Australia-South East region, 

and $21 million for growers everywhere else.” 

Without growing existing 

markets or fi ding new 

ones, the export value of 

Australian wine in 2025 

is expected to be $480 

million lower. The total 

cost of the anti-dumping 

measures could be at least 

$2.4 billion over a 

five-year period 

However, as Greenville says, “this isn’t to spell 

doom and gloom”. 

“It’s an outcome that can be avoided if we look at 

finding other markets for Australian wine or find 

ways to generate more value from our wine sold 

into existing markets,” he says. 

“The Australian wine industry is resilient, and 

industry bodies and businesses have already had 

success in diverting to other markets. 

“Since the beginning of the year, Australian wine 

exporters have managed to redirect around 30 per 

cent of the wine destined for China. They’re well 

on the way.” 

New data from government-run research 

body Wine Australia shows that exports of 

Australian wine to the United Kingdom are at 

their highest level in a decade, with the value 

of exports increasing by 23 per cent to $472 million 

and volume by 16 per cent to 269 million litres 

(30 million nine-litre case equivalents), making the 

UK the biggest destination for exports by volume 

and the second by value. 

Wine Australia corporate affairs manager Rachel 

Triggs says exports also increased to Singapore, 

South Korea, Malaysia, Taiwan and Hong Kong, 

but they were not enough to offset the decline in 

exports to mainland China. 

Australian wine exports during 2020–21 

declined by 10 per cent in value to $2.56 billion, 

compared with the previous financial year, while 

export volume declined by 5 per cent in volume 

to 695 million litres (77 million nine-litre case 

equivalents), according to Wine Australia’s latest 

Export Report, released in July. 

“However, excluding mainland China, exports 

increased by 12 per cent in value to $1.96 billion 

and increased by 6 per cent in volume to 643 

million litres,” Triggs says. 

Much of the decline in overall average value was 

due to a drop in the share of bottled exports – from 

45 per cent of the share of volume in 2019–20 to 39 

per cent in 2020–21. 

Triggs added that this was also a result of the 

mainland China market tariffs, as it had predominantly 

been a bottled wine market, and the growth 

in exports to the UK was dominated by unpackaged 

exports which were bottled in-market. 


23 McCormick Road Kyabram Victoria 3620 / Ph: 03 585 22 444 / info@jnrengineering.com.au 

LP Series 

Introducing the LP8000, 8 meter or 6 meter 

width Land Plane, twin mast independent for lift 

precision, dragging capabilities of approximately 

5 cubic meters. 

DG Series 

The DG Series is currently being manufactured in 

3.6m or 4.2m width Drag Grader has independent 

lift for laser precision. Dragging capabilities of 

approximately 3.5-4.5 cubic meters 

Bale Bull Round 

The BBR maintains a strong robust design capable of handling 

the heaviest bales. This machine is capable of carrying two 

bales and feeds on both sides. It is one of the only machines in 

the market that is able to feed the toughest of silage bales 

HDE Ejector 

Cut Sizes 3.6 & 4.2m -Rips -Carries -Cross levels -Laser levels. 

www.jnrengineering.com.au 

Leopard Ejector 

Cut Sizes 3.0m, 3.6m & 4.2m-Rips -Carries -Cross Levels -Laser Levels. 

HDB Bucket 

Cut sizes 3.6m & 4.2m 

-Rips -Carries 

-Cross levels -Laser levels. 

LB Bucket 

Cut sizes 2.7m & 3.0m-Rips 

-Carries -Cross Levels -Laser 

Levels. 

Bale Bull Square 

Features an adjustable moving 

arm for feed out control and 

on road transport, capable of 

carring two bales. 

XSE Ejector 

Cut sizes 1.8m, 2.4m 

-Rips -Carries -Cross levels 

-Laser levels 

FFM-FP-5145966-TS-365 

For more info, check out our YouTube Channel and Facebook Page under JN&R Engineering

Events 

Visitors to AgQuip in 2019 

The 2021 AgQuip Field Days have been 

rescheduled due to ongoing concerns over 

the impact of COVID-19 outbreaks, though 

planning for others is proceeding as planned 

November 

AgQuip 

Event organisers have postponed the 2021 AgQuip 

Field Days to November due to increasing and 

ongoing concerns in relation to the impact of 

COVID-19 throughout New South Wales. 

AgQuip was initially scheduled to take place from 

August 17 to 19 in Gunnedah, NSW, but following an 

outbreak of COVID-19, which has caused extended 

lockdowns throughout much of the state, organiser 

ACM Rural Events has postponed the event to 

November 16-18. 

ACM Rural Events group manager Kate Nugent 

says organisers had made the decision to hold an 

event this year after consulting with exhibitors and 

key stakeholders. 

“We all understand no timing will be ideal for us 

at the end of this year, however, every effort and 

emphasis will be placed on marketing AgQuip 2021 

to a broader regional audience,” she says. 

“Whilst AgQuip will be in the midst of harvest, we 

are hopeful the timing maximises our opportunity 

to offer all a super-charged attendance feeling 

confident and safe – and incentivising purchases on 

the field in a conducive rural environment over the 

days of this special event.” 

Planning for the Henty Machinery Field Days, due 

to take place on September 21–23, and the Australian 

National Field Days, outside Orange on October 21– 

23, is continuing, though organisers of both events 

said they are continuing to monitor the situation. 

HMFD chief executive officer Belinda Anderson 

says the 2021 field days will proceed as scheduled 

unless otherwise advised by NSW Health, with 

attendees encouraged to pre-purchase their tickets 

online and contactless spending encouraged. 

“Agriculture is an important and essential 

industry and farmers and agri-businesses need 

to be networking, researching, and buying,” 

says Anderson. 

“Henty Machinery Field Days will provide a safe 

environment for that to occur.” 

ANFD organisers say that planning is continuing for 

their event. 

“The Committee believes that by October we will 

be able to bring you a great COVID-Safe event for all 

to enjoy,” say organisers. 

“The Australian National Field Days Committee 

are constantly monitoring the advice of Health 

and government departments in relation to the 

Coronavirus (COVID-19) outbreak.” 

All three events had previously been cancelled in 

2020 as a result of the pandemic. 

FUNDING 

Funding for farmer challenges helps 

promote Australian agriculture 

Quids in 

Thirteen agricultural shows and related youth 

groups across Australia have received grant funding 

via the new Australian Young Farmer Challenge 

(AYFC) Regional Grant Program. 

An initiative of the peak body for the 580 

agricultural shows across the nation, Agricultural 

Shows Australia, the grant program helps shows 

invest in the spectacle of a ‘young farmer challenge’, 

which is a showcase of young people in Australian 

agriculture competing in diverse and colourful 

challenges testing skill, technique, knowledge 

and safety practices. 

Held at agricultural shows across the country, 

young farmer challenges can involve changing tyres, 

driving tractors, handling alpacas, identifying cattle 

breeds, putting out fires, tourniqueting faux snake 

bites, erecting fences and myriad other farming tasks 

in teams, against the clock and in front of a crowd. 

Agricultural Shows Australia executive officer 

Katie Stanley said the Australian Young Farmer 

Challenge Regional Grant Program required successful 

recipients to outline their plans for a sustainable 

competition in their local area or state. 

“These competitions allow young rural people 

to take centre stage with their mates in front of the 

crowds at agricultural shows, while demonstrating 

the diverse skills needed to be a modern farmer,” 

she says. 

“Shows use this competition to entertain crowds 

whilst being an educational showcase of young 

people in agriculture.” 

The 2020/21 grant program awarded over 

$75,000 in sponsorship, benefitting over 40 

competitions at different shows over the next 

18 months. 

“These competitions provide entertainment 

and crowd engagement as well education for the 

broader community about agriculture, food and, 

more specifically, the role of farmers and farm 

safety,” says Stanley. 

“The purpose of the program is to support the 

sharing of knowledge, encourage community 

initiatives and promote community leadership. 

“We encourage all those interested in 

participating in any of these young farmer 

challenges, or shows planning on hosting a 

competition to reach out to their state ag show 

body or Agricultural Shows Australia.” 

The project is jointly funded by Agricultural 

Shows Australia and the Australian government 

Department of Agriculture, Water and the 

Environment’s Building Landcare Community 

and Capacity component of the National 

Landcare Program. 

To find your local challenge, visit 

agshowsaustralia.org.au 


HD 6 SERIES 

BUILT BY CATERPILLAR (QUINGZHOU) LTD 

WHEEL LOADERS 

& EQUIPMENT 

“BUILT BY 

THE BEST” 

The Hercules wheeled loader and equipment range built for the Australian agricultural 

and construction environments. Feedlots, general farm use, material handling, quarries, 

construction and waste recycling. 

668D 

Rated Power 

178kw/240hp 

Operating Weight 

21,000kg 

Rated Load 

6,000kg 

Bucket Capacity 

3 - 5.5m 3 

Cabin 

ROPS/FOPS 

Enquire about the 

Hercules range today. 

636D 

Rated Load 

3,500kg 


11,000kg 

125hp 

H737 

Rated Load 

3,000kg 


7,250kg 

125hp 

HERCULES 636D 

130HP 

HERCULES 656D 

220HP 

HERCULES 658D 

220HP 

HERCULES 668D 

245HP 

HERCULES 676D 

270HP 

All ‘6’ Series Built by Caterpillar (Qingzhou) Ltd 

HERCULES 680D 

310HP 

QLD – NSW Steven - 0408 627 397 

QLD – NSW Ross - 0488 062 696 

28 Old Pacific Highway Yatala Q 4207 

Ph: 07 3807 4333 

www.bmesales.com.au

Events 

Events calendar 

Here are upcoming Field Day 

and agricultural events for 2021. 

Information was current as of 

going to press 

Dowerin Field Days – Dowerin 

Dowerin Field Days is the largest field day in Western 

Australia, attracting more than 25,000 visitors each 

year. Around 7,000 broadacre farmers attend the 

event each year and over half of all visitors stated 

their reason for attending was a strong interest in 

agricultural products and services. The Field Days 

has also won several tourism awards at a state and 

national level. 

When: August 25-26, 2021 

More info: www.dowerinfielddays.com.au 

Newdegate Machinery Field Days – Newdegate 

On the first Wednesday and Thursday of September 

each year, the town of Newdegate hosts one of 

Western Australia’s premier agricultural events, 

the Newdegate Machinery Field Days. Machinery, 

technology and research, animals and livestock, 

outdoor and camping exhibits, art and photography, 

fashion, show bags, food and wine, local produce, 

live entertainment, and much, much more make 

this two-day event one not to missed. 

When: September 1-2, 2021 

More info: www.newdegatemachineryfielddays.com 

Riverland Field Days – Barmera 

Held over a two-day period, the Riverland Field 

Days is a staple event in the region. With over 

350 exhibitors and approximately 30 caterers, 

there is something for the whole family. The field 

days include the latest in agricultural machinery, 

equipment and services, demonstrations, 

information sessions, activities, entertainment, 

tastings, trade exhibits and more. 


More info: www.riverlandfielddays.com.au 

Henty Machinery Field Days – Henty 

Located in the heart of southern NSW, Henty attracts 

the best of the best when it comes to farm machinery, 

agribusiness and rural living. More than 60,000 

people flock to Henty Machinery Field Days 

each year and for good reason – book this one 

in your calendar. 


More info: hmfd.com.au 

Royal Melbourne Show – Melbourne 

The Royal Melbourne Show is Victoria’s largest 

showcase of agriculture and is conducted annually 

by The Royal Agricultural Society of Victoria 

(RASV). Visitors to the Royal Melbourne Show will be 

entertained all day with a huge range of all-inclusive, 

interactive and fun activities and attractions, 

including thousands of show animals competing 

for best in breed prizes. 

When: September 23-October 3, 2021 

More info: royalshow.com.au 

Yorke Peninsula Field Days – Paskeville 

The three day biennial event has a major focus on 

agriculture and the future with extensive displays 

of the latest agriculture machinery and equipment, 

technology, information and services on a 30 

hectare static display site area. With 700 exhibitors, 

guest speakers and family entertainment, the event 

provides a wide variety of quality display and 

demonstrations designed to be of interest and 

appeal to both rural and urban families. 


More info: www.ypfielddays.com.au 

Elmore Field Days – Elmore 

From humble beginnings in 1964, Elmore Field Days 

has gained recognition as one of Australia’s premier 

agricultural Field Days. Elmore Field Days is focused 

on providing an unbiased service to agriculture 

and community with flow on economic benefit 

to regional areas. Hundreds of exhibitors will be 

showing the latest in machinery and technology. 

When: October 5-7, 2021 

More info: www.elmorefielddays.com.au 

For the full year’s calendar of events: tradefarmmachinery.com.au/events 

2.5T - 21T AVAILABLE NOW, NATION WIDE. 

FROM YOUR LOCAL DIECI DEALER. 

1300 888 479 


COTTON PRO 70.10 

ENGINEERED SPECIFICALLY FOR 

AUSTRALIAN COTTON PRODUCERS 

Max Capacity: 7,000kg 

Max Lifting Height: 9.65m 

Max Power: 125hp 

Max Speed: 30km/h 

Manufactured in Italy to meet Australian 

design, safety and compliance standards and 

teamed with a range of specially engineered 

attachments, the Dieci Cotton Pro has been 

custom modified to meet the needs of the 

Australian farmer. 

Enhancements including a rear mounted 

radiator and hydraulic oil cooler, easy ride 

boom suspension, Australian developed air 

conditioning / cabin filtration system, side 

shift carriage, plus a number of additional 

features (too many to list)! 

Contact Dieci on 1300 888 479 

or visit www.dieciaustralia.com.au 

FFM-FP-5204974-CS-401

Events 

A 

B 

New Zealand’s Fieldays 2021 were an opportunity 

for the nation’s agricultural producers to get 

together and check out the latest innovations – and 

our friends from Farm Trader NZ were there 

Choice 

selection 

New Zealand’s 53rd annual Fieldays saw farmers from 

around the nation converge on Mystery Creek, just outside 

Hamilton on the North Island. 

Held from June 16–19, and following a one-year hiatus due 

to the COVID-19 pandemic, the four-day event saw more 

than 132,000 visitors through the gates, with more than 

1,000 exhibitors showing off heir new products. 

Farm Trader NZ was there to check out some of the latest 

in new products, with highlights shown here. 

C 

A 

Blue skies welcomed Fieldays 

visitors on opening day 

B 

Two iconic rural brands 

C 

The eye-catching Snarler 

AT6 L quad bike from 

Segway Powersports 

D 

The impressive Case IH 

Quadtrac 550 

E 

The Fiber Fresh team at 

Fieldays 

F 

Plenty on show from 

Strautmann from the Verti-Mix 

to large Giga trailers 

G 

The latest offerings from JCB 

include the Series III Agri 

Loadall 

H 

Something for the smaller 

family members – the Polaris 

Outlaw 


Events 

D 

F 

E 

G 

H 


29

Events 

I 

K 

L 

J 

M 

I 

The Case IH 8-row 4408 

corn head includes the latest 

innovations in harvesting 

technology 

J 

Limited edition Claas 660 Arion 

K 

A rear view of the Pichon Muck 

Master M945 

L 

The Z Force 1000 from CFMoto 

M 

Wheels up for the Prolan NZ 

range of industrial lubricants 

N 

The distinctive Lemken blue 

N 


‘MIX IT UP’ 

WITH PRECISION. 

Accurate mixing is imperative to achieve quality 

results from your feed. Quality built and packed 

with features, there’s plenty of reasons why you’ll 

see an Abbey on a feed pad near you. 

BUILT WITH SUPERIOR CONSTRUCTION AND DESIGN. 

A 20mm base plate, 15mm auger and SOM planetary transmissions provide strength and product longevity. 

Each model produces an excellent quality of mix for all varieties of materials. 

• Digi Star electronic weighing system 

• 4 weigh bars for consistent and 

accurate weighing 

• Independent chassis 

• Heavy 3 stage jack 

• PVC elevator 

• 8mm hardox rolled wall 

• Large adjustable counter knives 

• 2 speed gearbox (twin auger model 

only) 

• Wide angle driveshaft 

• Hydraulic brakes 

• Hydraulic/electric controls of all 

functions 

• Side or front door discharge options 

• Single or tandem axle options, both 

with 435/50R19.5 wheels 

• 3-year gearbox warranty 

CALL FARMGARD 24 HOURS 

1800 FARMGARD 

FIND OUT MORE AT 

farmgard.com.au 

Nationwide Dealer 

Service Network 

35 years, Generations of 

Experience 

Ian Luscombe - Territory Manager (NSW & QLD) 

0458 978 231 | ian@farmgard.com.au

Events 

P 

O 

R 

Q 

O 

Plenty of interest for dairy 

farmers at Fieldays 

P 

The original Bosch Iron Man 

Q 

Ready for work – the New 

Holland T4.95V orchard tractor 

R 

The Kinghitter Series 1 post 

driver 

S 

Farm bikes, vehicles, and boats 

were all part of the Suzuki 

line-up 

S 


RELIABLE LOADERS 

built to last 

Reliable performance isn’t expensive to build, 

SDLG has been proving that for decades. 

The SDLG range of wheel loaders deliver simple operation 

and easy upkeep at some of the most competitive prices 

in the industry. With the performance of a premium 

machine, and a 2 year / 2,000 hour warranty, you can’t 

beat the value for money SDLG can offer. 

THE ULTIMATE 

ALL-ROUNDER! 

MEET THE TEAM: 

Images are for illustration purposes only. 

LG918 

6,200 kg | 77 hp 

LG936LA 

11,350 kg | 123 hp 

LG938L 

10,900 kg | 130 hp 

LG946L 

13,130 kg | 173 hp 

L958F 

17,560 kg | 217 hp 

LG978 

23,500 kg | 295 hp 

Visit cjd.com.au for more information or call 1300 887 530 

enquiries@cjd.com.au | Find us on Facebook, LinkedIn and Instagram 

BIG ENOUGH TO TRUST SMALL ENOUGH TO CARE

News 

Sales of agricultural tractors exceeded 

15,800 units in the last financial year 

MARKET 

Sales boom 

The end of the financial year saw a boost for tractor sales 

Sales of agricultural tractors have exceeded 15,800 

units sold for the financial year ended June 30 – a full 

29 per cent ahead of the previous year, following a 

one per cent increase in June. 

This is an outstanding result for the industry and, 

while there is cause for celebration, perhaps the 

focus should be on the job done by manufacturers, 

importers, dealers and suppliers to industry in 

achieving this under such extreme conditions. 

Delivering such a result against a backdrop of 

lockdowns, social distancing restrictions, supply 

challenges, staff hortages and climatic extremes 

is a credit to the industry. 

A more detailed look at the numbers reveals that 

all states have reported increases on the previous 

year, with NSW leading the pack, up 10 per cent in 

June to finish the year 57 per cent ahead. 

Victoria was down two per cent for June to be 18 

per cent up for the year and Queensland was up 

four per cent for the month, ending 25 per cent up. 

Sales in Western Australia dipped nine per cent in 

Gary Northover is 

executive director of 

the Tractor & Machinery 

Association of Australia 

(TMA). He can be contacted 

on (03) 9813 8011 or at 

gary@tma.asn.au 

June to be 34 per cent ahead for the year, South 

Australia reported a 13 per cent decrease for the 

month to be 10 per cent up full year, Tasmania finished 

24 per cent ahead for the year and sales into 

NT enjoyed an 11 per cent yearly rise. 

All performance reporting categories enjoyed 

strong rises for the year, with the under-40 

horsepower (30kW) range up 27 per cent, following 

a 20 per cent dip in June. 

The 40 to 100hp (30–75kW) range was again up 

strongly five per cent in the month,34 per cent for 

the year, the 100 to 200hp (75–150kW) category was 

steady, ending the year up 20 per cent. 

The large 200hp (150kW) plus range had another 

strong rise up 41 per cent and was 57 per cent ahead 

for the year. 

Sales of combine harvesters have begun in 

earnest, up 50 per cent on the previous June, with 

dealers reporting solid forward order books. 

Baler sales have continued to drift ff heir recent 

highs but ended the year up 23 per cent and sales 

of out-front mowers have finished the year strongly 

recording a 33 per cent rise. 

Looking forward, whilst it is hard to see the levels 

of the past year being repeated, there is no doubt 

that demand is still hot. 

The federal government’s Temporary Full 

Expensing Program, which essentially replaces the 

Instant Asset Write-Off cheme, will continue to 

support demand. Both farming conditions and demand 

for product are in a good place, with locations 

such as Western Australia looking very prosperous. 

Offsetting these positives are the ongoing 

supply challenges due both to the factory 

capabilities and the previously reported shipping 

challenges, with these issues also impacting the 

supply of spare parts. 

Dealers’ ability to supply current demand will be 

wholly dependent on the ordering done last year, 

with current orders being quoted at 9–12 months 

away in many instances. 

Pricing pressures are likely to be experienced in 

the year ahead with reports of 8–11 per cent pricing 

lift occurring in Europe. 

PROUDLY MADE IN ITALY 

INVEST IN QUALITY HAY 

MAKING EQUIPMENT. 

Suited to farmers and contractors, discover how Enorossi 

hay making equipment could benefit your land today. 


www.clarkfarmequipment.com.au 

sales@clarkfarmequipment.com.au 

1800 648 384 

Clark Farm Equipment 

clarkfarmequipment 

Clark Farm Equipment

DOZER SPECIALISTS 

Late model. Low hours. Customised to your needs. 

40+ 

DOZERS 

IN STOCK 

CATERPILLAR D8T 2014, 7,900hrs, SU tilt blade, Sweeps, MS 

ripper, Very good U/C. Serviced through workshop. Sold job 

ready. S892. TA1092467. 

$569,900 plus GST 

CATERPILLAR D6T XL 2013, 5,200hrs, SU tilt blade, sweeps, 

Rear screen, ARO, light package, MS ripper. Serviced with 

workshop report. S833. TA1072548. 

$289,900 + GST 

CATERPILLAR XW 2015, 5,950hrs, VPAT, ARO with GPS 

monitor, 258HP, new chains and segments. Sold with MS ripper. 

S862. TA1080528. $329,900 plus GST 

KOMATSU D65EX-17 2015, SU Sigma blade, MS ripper, Top 

Con ready, very good U/C. S712. TA1035521. $249,900 + GST 

CATERPILLAR D4G XL 2004, 5,800hrs, 90HP, new sweeps, 

screens and MS ripper. Fully serviced with workshop report. 

S891. TA1092466. $124,900 plus GST 

CATERPILLAR D6T XL 2015, 4,100hrs, SU tilt, ARO, sweeps, 

rear screen. Sold with MS ripper or 4 Barrel. S681. TA1031013. 

$295,000 + GST 

CATERPILLAR D5K2 XL 2018, Only 990hrs, ARO wired, sweeps, 

screens and MS ripper. Serviced through the workshop. S869. 

TA1084883. 

$239,900 + GST 

KOMATSU D65EX-18 2017, only 2,500hrs, VPAT, Top Con 

wired, MS ripper. Save thousands on new price. Serviced with 

workshop report. S835. TA1072551. 

$319,900 + GST 

CATERPILLAR D6T XL 2015, 5,500hrs, ARO wired, VPAT, 

258HP, Track guards, HD 4 Barrel MS ripper with pitch adjust. 

Serviced with workshop report. S837. TA1072552. $329,900 + GST 

CATERPILLAR D6K2 XL 2014, 5,200hrs, ARO wired, sweeps, 

screens to be fitted. MS ripper. Excellent U/C. S724. TA1040118. 

$207,900 + GST 

CATERPILLAR D6K2 XL 2017, only 1,300hrs, 6 way blade, 

Sweeps, screens and MS ripper. S815. TA1068666. $269,900 + GST 

CATERPILLAR D6T XL 2012, 5,500hrs, SU tilt blade, ARO, 

sweeps, rear screen and 4 Barrel MS ripper. S686. TA1031015. 

$285,900 + GST 

CATERPILLAR D6T XW 2016, 5,200hrs, 258 HP, ARO wired, 

VPAT, MS ripper. Serviced with workshop report. S839. TA1072554. 

$339,900 + GST 

CATERPILLAR D6T XL 2013, 4,700hrs, SU tilt blade, MS ripper, 

near new under carriage. Serviced with workshop report. S841. 

TA1072555. 

$289,900 + GST 

KOMATSU D65EX-17 2012, 5,600hrs, Sigma blade, sweeps, 

screens, Top Con ready, reversing camera, MS ripper. S753. 

TA1052201. 

$239,900 + GST 

*Conditions apply. 

FFM-FP-5192176-E 

ABN: 32932794414 

Daz Scale 

mkntraks@gmail.com

Opinion 

The competition 

for labour will 

see harvest costs 

increase 

Labour losses 

Cost of labour is linked to the global header market 

Headers are getting bigger, more complex and more 

expensive and so is the global demand for them. 

The value of the international combine harvester 

market today is estimated to be around A$20 billion 

dollars and is predicted to nearly double by 2030. 

Every month, somewhere in the world, you will 

find a harvesting machine working its way through 

the annual harvest of 2,790 million tonnes of grain 

(2020), which equates to 10,000 shiploads at 27,900 

tonnes each. 

From Australia to Argentina, Sudan to Saudi 

Arabia, China to Chile you will see the annual grain 

harvest taking place – putting 1.1 billion tonnes 

of corn, 775 million tonnes of wheat, 505 million 

tonnes of rice, 159 million tonnes of barley, 62 

million tonnes of sorghum, 25 million tonnes of 

oats and 14 million tonnes of rye into the globe’s 

granaries. 

Global production comprises some of the 

world’s smallest producers, such as Qatar, which 

harvests just 5,000 tonnes off and reclaimed 

from the Gulf Sea in what must be the world’s most 

expensive grains – producing crops they proudly 

call Golden Organic. 

On the other side of the equation, the world’s 

biggest wheat and rice producer is China, which 

harvested and ate its way through 136 million 

tonnes of wheat and 211 million tonnes of rice last 

year and still needed to import more to feed its 

rapidly growing middle class. 

Not to mention the world’s highest yielding wheat 

crop in New Zealand, which clocked in at 16.79 

tonnes per hectare, or the world’s fastest-expanding 

area of arable cropping land in the central part of 

Brazil, which has grown from 26 million hectares 

in 2000 to over 50 million hectares today – nearly 

double Australia’s entire dryland cropping area. 

Across the globe the demand for combines, 

big and small, is growing faster than the world’s 

grain production as farmers seek bigger and more 

efficient machines to get the crop off. 

The combine harvester market includes more 

than just the big European and American names 

we can all recall (Agco, Claas, Deere, CNH) but 

also a swag of other lesser known and completely 

unknown brands including Rostov, Rostselmash, 


Trevor Whittington, 

CEO WAFarmers 

Kubota, Mahindra, Dasmesh, Kartar, Preet, Sdf S.P.A. 

Iseki and TAFE. This doesn’t even include about 

30 Chinese manufacturers responsible for the two 

million units, mostly between 60–120 horsepower 

(45–89kW) and costing $30,000–$60,000, which 

are working in China today. 

While the Asian machines might be small, 

compared to US, EU and Russian machines, 

the one thing they all have in common is every 

manufacturer is racing to make bigger machines. 

Why? Because, everywhere in the world, 

agriculture is facing a labour problem. 

Farmers from Argentina to Russia, China to 

Sudan are reporting either a skills shortage, a 

labour shortage or a cost of labour problem. 

In India, farmers are complaining about the 

increasing cost of labour as skilled workers head 

to the city in droves, chasing better paying jobs, 

forcing farmers to contract in harvesters to replace 

manual workers or upgrade to larger self-propelled 

machines. 

This has resulted in over 6,000 additional 

machines being added to Indian farmers’ inventory 

last year in the race to get their 300 million tonnes 

of grains off arms and onto dinner plates. 

Chinese manufacturers of harvesters are developing 

larger machines as available labour decreases 

Even Russia, with its highly skilled workforce, has 

a problem as a result of its declining population. 

The nation’s mega farms, with hundreds of 

harvesters each, are in the process of rolling out 

automated headers that mirror the actions of a 

master unit as a way of stripping out labour costs. 

And, of course, here in Australia farmers are 

spending up big, replacing machines with newer 

models because they can’t be guaranteed fast 

access to mechanics or parts in case of a breakdown, 

or they are buying bigger models to replace 

two smaller machines as a result of a lack of access 

to skilled operators. 

What does this mean for Australian agriculture? 

Our farmers are experiencing probably the 

world’s biggest labour challenge, with a shortage 

of holiday visa workers, an ongoing local skills 

shortage and rising occupational health and safety 

risks combining to force farmers to seek to replace 

labour with new capital equipment. 

The competition for labour will see harvest costs 

increase as farmers bid to attract workers from a 

limited pool of bodies and, more importantly, talent. 

As a result, the days of $25-an-hour workers are 

long gone as farmers work out the cost benefit ratio 

and risk of putting either a totally unskilled worker 

or an expensive skilled worker onto a chaser bin 

or header and hoping they don’t hit the one power 

pole in the paddock. 

Expensive machines demand expensive skilled 

labour and without backpackers and with a mining 

boom underway, farmers can expect to see a rapid 

increase in hourly rates. 

In time we will look back in wonder at how we 

got away for so long with paying harvest workers 

a fraction of the value of what they bring to getting 

the harvest off. Either we compete with the rest 

of Australia for labour and pay more, we open the 

gates wider to expand the imported worker pool 

to tap the skilled Eastern Europeans and South 

Americans, or we follow the Russians and invest 

in automated machines.

Feature 

The 1982 John Deere in 

condition as purchased 

The 1982 John Deere 

fully restored 

RESTORATION 

A 1982 John Deere 4040 is back on the road after a bit of 

repair work and a few well-placed phone calls 

Iron horse rides again 

John Newman, a farmer and contractor with a 

property in Gowrie Junction, near Toowoomba in 

Queensland, was in the market for a Chamberlain 

tractor in 2017 when he stumbled upon the deal 

of a lifetime. 

“The main thing I was looking around for 

was something with more power than my 

Chamberlain 9G – it ran about 60 horsepower 

[45kW] and I wanted something in the hundreds… 

something to tow a trailer around,” he says. 

But with many of the Chamberlains he was 

looking at located too far away to make it a 

reasonable deal, Newman instead found a 1982 

John Deere 4040 with 120hp (89kW) and a 

minuscule 2,212 hours on the clock. 

The tractor was fitted with an aftermarket M&W 

turbo kit when new, which saw the power take-off 

power boosted from 90hp (67kW)to about 125hp 

(93kW) when dyno tested. 

“It had a fairly low price on it, so I rang them 

up and they said ‘oh, it’s low hours but it hasn’t 

done any work for the past 10–15 years’ – and 

before that it only got used once a year planting 

sugarcane,” he says. 

The original owner was a John Deere dealer in 

Ballina in northern NSW, who used the tractor only 

for planting sugar cane and had parked it up for 

about 10 years before making the decision to sell. 

Newman says the owner had two 4040s 

along with a fleet of smaller tractors, but had left 

The facts 

The John Deere 4040 is the smallest model in 

the company’s 40 Series – which it dubbed “the 

new Iron Horses” – with more horsepower and 

more iron. 

This Iron Horse range initially consisted of the 

4040, 4240, 4440, 4640 and 4840; and in 1979 

John Deere rounded out the Iron Horse lines 

with two new four-wheel-drive tractors – the 

8440 and 8640. 

Although John Deere had introduced a 

successor to its 1960 New Generation of tractors, 

appropriately called the Generation II, it was 

these 1978 Iron Horses that helped established 

the firm as a world leader in horsepower. 

The JD 4040 had a production run that extended 

over five years from 1978 through to 1982, and 

much of it unused after he retired and moved onto 

share-farming the property. 

“My 4040 had only clocked up approximately 

2,200 hours when inspected, as it was fitted permanently 

with a cane planter and only used during the 

planting season,” he says. 

“This was verified as the floor mat and seat upholstery 

were unworn and, likewise, the brake and 

clutch pedals. 

“The drawbar had never been used to pull any 

implements as machining marks and paint was still 

visible in the pin holes of the yoke,” he adds. 

“It had never had anything on the drawbar until 

I got it – apparently it had a tank at the front and a 

planter on the linkage at the back – one tractor did 

all the tillage work and this one did all the planting.” 

AIRS AND GRACES 

Despite its low hours, the tractor was not entirely in its 

original condition. With Ballina being a coastal town, 

the salty sea air had done a bit of damage to the tractor, 

despite it being stored in a farm shed. 

“The only rust present was around the cab where 

the rear mounted work and indicator lights were rusted 

out. The roof cover retaining screw heads were 

damaged and the air conditioning was not working 

due to a steel pipe being damaged,” says Newman. 

In addition to this, Newman says the seller told him 

the engine had been losing some coolant while operating 

under load – which had led them to suspect that 

were completely built in-house at John Deere’s 

Waterloo plant in Iowa, USA. 

The engine used is of 404 cubic inch (6.6L) capacity 

and is non-turbo charged, with a max power 

output of 120hp (89kW) and power take-off utput 

of 90hp (67kW). 

Transmission options were the Quad Range (the 

most popular here in Australia), Powershift nd 

Synchro-Range. 

There was also a 4040 built at the Mannheim 

Factory in Germany (designated the 4040S) with 

the major differences being a German built 5.9L 

engine, headlights mounted on the sides of the 

nose-mounted fuel tank and a manually operated 

independent hand park brake with a brake pack 

mounted on the front of the diff inion shaft. 

the head gasket was leaking and, in part, led to the 

lower price. 

“So I went away and did some sums – made a few 

phone calls around the local engineers about how 

much it might cost for them to do up the head for 

me – grind and do up the valves – I would pull it off 

and on again because I am a diesel fitter by trade,” 

he says. 

“They came back with a figure that added to the 

price and it was still quite good, but it turned out it 

wasn’t the head gasket, it was the radiator. 

“I found that the leakage was from hair line cracks 

on the bottoms of the radiator tubes and as there 

had been previous repairs done to the radiator core, 

I decided to replace this radiator.” 

Making a few phone calls led Newman to find a 

new Irish-built non-original unit at Wagga Wagga, 

NSW, which fit the bill. 

“Total cost of the radiator delivered to TNT Toowoomba 

was $750, which was about $500 less than 

the next best alternative of a re-core,” he says. 

“Incidentally, this radiator was originally held in 

stock at [Toowoomba tractor wrecker] Clancy Tractor 

Parts and was sent to Melbourne in a container 

load of parts after the dispersal sale.” 

The tractor also had a few oil leaks, with the trip 

from Ballina causing the linkage draft ontrol shaft 

seals to start leaking in addition to cracks in the diff 

lock external oil supply line, which were present at 

inspection. 

“I was aware of this potential issue but it was OK 

when inspected,” he says. 

ON THE ROAD AGAIN 

Newman says what is important to him was to bring 

the tractor back to a working state, rather than as a 

pristine older model for display only. 

But that didn’t stop him giving the tractor a complete 

clean and re-paint, using paints supplied by 

the original manufacturer to avoid mismatches and 

keep the correct colour. 

He also replaced the front tyres with a multi rib 

type, upgraded the rear lights – incorporating stop 

lights – and fitted a trailer connection to meet highway 

requirements. 

The cab access steps were also upgraded to 

improve driver access using JD spray coup step 

treads and the original steps moved to the RH side 

to access the windscreen for cleaning. The main 

outstanding job to be completed is the air conditioning 

system overhaul. 


Feature 

It’s low hours but it 

hasn’t done any work 

for the past 

10–15 years 

Newman also bought an aftermarket cab reline kit 

to reupholster parts of the cab, though the seat only 

required a good clean, and the tractor’s suspension 

mechanisms were lubricated and painted. 

Since it has been restored, Newman says he’s 

done several trips to Oakey – about 28km away – 

and visited the Goombungee Show in the tractor. 

“The transmission is the quad-range option and 

this serves my requirements quite good on the 

country roads around the Downs,” he says. 

“[I’ve been] towing the heavy-duty trailer 

transporting my David Brown 50TD dozer with 

the ability of being able to change on the move 

within the four speeds in the top transport range. 

“It isn’t as fast as I would like on the road but, with 

the roads around here, you probably wouldn’t want 

to go much faster without some sort of suspension 

on it,” he adds. 

The tractor has also spent a few hours with a 

heavy-duty slasher doing paddock maintenance, 

cutting fire breaks and dressing up farm tracks with 

a Britstand 6ft 1.8m)-wide rotary scoop. 

“This scoop is as just as effective as the tractor pull 

sled at loading up the engine,” says Newman. 

Newman says that he wanted a working machine, not 

just a display tractor 

Green One 

GrainRite 

Self Propelled Augers 

are designed and built strong and tough in Australia 

for Australia’s demanding conditions. Finger tip 

hydraulic controls allow the operator to raise & lower 

each end, ground drive, and steer. 

Heavy duty barrel and frames reduces operation 

vibration considerably - less vibration means less grain 

damage. Reverse gear box with positive lock allows 

quick and easy cleanout. 

All our augers come standard with highway lighting, 

oversize sign, new 10 ply tyres, aluminium mud guards, 

fire extinguisher, drop spouts, cast iron pulleys, and 

many more features and options. 

GrainRite Augers have a 10.75” width barrel that is 

2.5mm thick. GrainRite Augers are available in 35’, 

50’ & 60’ lengths. 

FFM-HH-5014229-TS-314-XCC 

Call 03 5397 5200 

or email us at info@grainrite.com.au 

www.grainrite.com.au 

Farms & Farm Machinery 39

Feature 

What we’ve been 

working towards in 

just changing the 

culture within the 

staff t the farm 

SAFETY 

Since taking over the family farm in 2016, former agronomist 

Simon Craig has found new ways to look at farm safety and 

help prevent potential accidents, Anthony Wingard reports 

Forward thinking 

Victorian sheep and grain farmer Simon Craig has been 

working to improve health and safety on his farm 

Victorian sheep and grain farmer Simon Craig has 

always been one to put safety first. 

That’s why recently, when Craig and another of his 

staff ere faced with inspecting the inside of an old 

silo – regarded as among the most dangerous tasks 

on a farm – he was sure to take the necessary safety 

steps beforehand. 

“The best you can do is to start identifying the 

risks and work towards minimising it and finding a 

solution,” Craig told Farms & Farm Machinery. 

Together, the pair talked it through before he 

entered, devising a strategy of action should the lack 

of oxygen and increased levels of carbon dioxide 

and nitrogen dioxide cause him to pass out. They 

decided to cut a hole in the side of the silo that was 

big enough to fit Craig if he needed assistance and 

could be pulled out. 

“It probably wouldn’t have been for the benefit 

of the silo, but we talked about that and said, well, it 

will be safer, and it will also let some more oxygen 

in,” he says. 

The inspection of the old silo was a straightforward 

exercise, yet it is these instances – of which 

there are plenty – where Craig and his staff ave 

implemented measures to ensure greater safety 

is achieved. 

Having studied agricultural science at university, 

Craig worked as an agronomist at ag-research 

organisation Birchip Cropping Group until he took 

over the family’s Lemac farm, outside Kooloonong 

in Victoria’s north west, in 2016. 

His time as an agronomist has seemingly 

provided him with a knowledgeable foundation 

on farm safety and has worked to update and 

improve safety practices at Lemac since. 

“I probably see it [farm safety] as a pretty big risk to 

farming businesses as a whole,” says Craig. 

“I think we seem to have an attitude of common 

sense pays and that we rely on people’s awareness 

and common sense to do simple tasks,” 

“There should be more awareness of it.” 

CULTURE SHOCK 

Paramount to his work in farm safety – which has 

seen him become one of the faces of WorkSafe’s 2021 

Farm Safety Week – is the changing of attitudes and 

culture around farm safety among his staff. 

Regular Monday meetings are now a staple at 

Lemac, where Craig and his team – comprised of 

one other full-time worker and a handful of 

backpackers and casual labour during harvests – 

discuss the past week where staff ave the 

opportunity to state if anything needs fixing or 

addressing. A notice board has also been installed 

where safety tasks are noted down and subsequently 

crossed off pon completion. 

Several interventions have already been 

implemented on the farm. Staff dentified the seeder 

bars as a potential risk; slippery from a combination 

of fertiliser and dew when they were climbing up 

there at night. High-vis tape was installed on each of 

the frames – the solution cost just $100. 

Roll bars have also been installed on their quad 

bikes – a practice which will be required on new 

vehicles in Australia by law from October this year. 

“The main thing that I’ll happily hang my hat on 

and what we’ve been working towards in just changing 

the culture within the staff t the farm,” says Craig. 

“We try to bring them along with making them see 

what we’re trying to do is the best thing for them as 

well and it’s not just me filling out paperwork and 

ticking boxes. 

“Most of the time, they just wanted to keep on working 

– just head down, bum up – and that really was the 

hard thing, to change their attitude to it. But I think 

once you explain to them what you are trying to do, 

you actually do get them on the right side. 

“Once you’ve got the culture and the right 

attitude among the staff roup, the paperwork and 

everything else will follow. There’s no point throwing 

paperwork at staff t the start because they will 

dislike it, but if you go with them and bring them 

along the journey, you’ll find everything else 

happens in the meantime.” 

IN THE CLOUD 

Day-to-day, Craig and the team document 

everything on Safe Ag Systems – a cloud-based 

safety management soft are accessible as an 

app on smart phones and online. 

The software, designed by a former South 

Australian farmer, can be used for a myriad of 

agriculture safety functions. At Lemac, it is used to 

bring staff p to speed on the safety requirements 

and document any occupational health and safety 

risks or hazards that arise throughout the day. 

Craig also uses the system to induct and introduce 

machinery on the farm where it stores information, 

including operation manuals and service history. 

“If a staff ember happens to use a particular 

[piece of] equipment and notices that it needs to 

be repaired, he can note it in the software and so 

someone can fit it before its next use,” says Craig. 

“The app helps us be more proactive but, as a farm, 

I think the next steps are at a more senior level with 

more documentation, more protocols put in place. 

“I believe we are a safe enough farm but… as a 

farmer, I don’t want to proclaim that I have the safest 

farm in Australia.” 

However, as Craig reiterates, documenting and 

registering equipment via the Safe Ag Systems 

software may not meet state and territory 

occupational health and safety guidelines, 

with the Victorian Farmers Federation (VFF) 

and other state entities often requiring more 

documentation and records. 

It’s a combination then, of both monitoring and 

recording information via the software as well as 

logged information elsewhere. To do so, Craig has 

engaged with a consultant from the VFF in order to 

be compliant with rules. 

“VFF have a team dedicated towards helping 

its members, which also includes a free consultation 

and inspection of the farm, and there was no 

animosity or hardness coming,” Craig says of his 

dealings with the VFF. 

“It was very open-minded – ‘are you aware of your 

expectations here and there’ – and they pointed out 

a few things which they saw as a possible risk and 

gave me an idea of some more.” 

FARMER ADVICE 

Moving forward, Craig and the team at Lemac Farm 

have already identified other areas where they hope 

to improve their safety practices. 

Namely, Craig cites the risks associated with 

working at height and working with fatigue as 

areas of improvement. However, fatigue remains 

a factor on the farm as operating hours have been 

extended recently due to the COVID-19 pandemic 

meaning fewer backpackers and seasonal workers 

are available. 

He also wants to streamline the noticeboard and 

weekly meeting process – such as recording what is 


Feature 

Identify the 

cheaper way to 

do things safer 

being said in the latter; making it easier to document 

and achieve a solution. 

Despite the size of Lemac, which is well above 

the national average farm size (4,331 hectares), Craig 

says other farmers around the country can easily 

implement similar safety measures in their own 

smaller operations. 

“Even just doing a self-check on your own farm and 

identifying yourself ‘what would a five-year-old child 

do, and where might put their hand?’ If you think 

like that, you will identify the risks which would be 

there and that would be where I would start and then 

identify a priority list,” he says. 

“Obviously, we deal with old augers and old silos, so 

to change those would be half a million dollars. 

“So, what are some things you can do in the meantime? 

Identify the cheaper way to do things safer. 

“Certainly check your state and territory laws and 

regulations in regard to what you as a business have 

to keep in terms of documentation. Even just a simple 

log of instances on the farm where someone can 

report and action incidents. I’m not saying this will 

prevent an accident from ever happening on a farm, 

but it will possibly reduce the likelihood of it happening 

and also show a willingness of a business to be 

positive about driving a safe workplace.” 

Weekly meetings with staff and a safety notice board are 

two aspects that Craig has brought in to bolster safety 

ONE PERSON, ONE TRACTOR 

JADAN COLLECTING & 

STACKING SOLUTIONS 

Jadan offers high-performance hay handling systems that are 

specifically designed for the farming market in Australia. These 

simple and robust machines create efficient and faster hay 

handling systems that take the sweat out of handling bales. 

BIG BALE STACKER 

ACCUMULATOR & GRAB 

1300 523 263 | www.jadan.net.au 

Scan here Farms to watch & Farm videos, Machinery 

or visit www.jadan.net.au/videos 

41 

FFM-HP-5168397-TS-375

Review 

The Wild family has decades and generations of experience in 

livestock transport, still going strong like their trusty Kenworth 

nicknamed ‘Grunter Hunter’. Farms and Farm Machinery spoke 

with Ian and Fiona Wild about the Wild family’s history and 

how it’s not quite time for a full restoration 

Words and Images Warren Aitken 

Drive on the 

wild side 

I 

must admit that, when I first spotted the 

Wild’s Livestock twin steer Kenworth, it blew 

me away! It went straight to the top of my 

‘I’ve got to know the story behind that’ list. I thought it 

was going to be such a cool restoration story. 

I was so wrong; you want to know why? In order 

to be a restoration story, the truck has to have 

been restored! It turns out that the Wild’s Livestock 

truck has never stopped; it has not had time for a 

restoration, it is just a hard-working iconic truck. 

The truck did get a little downtime when the 

motor was first replaced with a couple of million 

kilometres on it. Since then, the big girl has racked 

up another million-plus kilometres. All up, there is 

over three and a half million kilometres on a truck 

nearing its 30th birthday. 

I may not have been able to get a restoration story 

out of owner and driver Ian Wild, but I was certain 

I would still get some interesting tales. In fact, I got 

some very ‘wild’ stories. My apologies, I will try 

hard to avoid any more puns. 

DRIVING AND DROVING 

Wild’s Livestock’s history can be traced all the 

way back to 1928 when Ian’s dad Laurie, at a mere 

13-years-old, left chool and became a drover. His first 

droving job saw him assisting in the relocation of 

350 Hereford bulls from Jandowae down to Ipswich. 

It’s a hell of a job for a young kid to get into; I’m sure 

those bulls would have been pretty intimidating for a 

young Laurie. 

As he grew, so did his reputation. Laurie became 

well-known around the area as an expert drover, 

legendary horseman and renowned horse breaker. 

When he was not away droving, Laurie would be 

hard at work with his father and brothers on the 

family farms in Donnybrook and Peachester. 

Laurie spent nearly 20 years in the saddle before 


marrying and ‘settling down’. In 1946, Laurie and his 

wife Margaret bought a working dairy at Bald Knob 

on the southern end of the Blackall Range, Sunshine 

Coast. It was this family farm that would see Laurie 

changing from droving to transport. 

Over the next few decades, Laurie and Margaret 

purchased several neighbouring farms and were 

heavily into supplying milk for the local area. 

With a growing farm, and changes in the farming 

landscape, Laurie was a very busy man. Add in 

the fact that he ended up with six kids as well and 

I doubt he slowed down for much. It was a wildly 

busy time. 

Last of the six Wild children was Ian and he is the 

one I had the privilege of sitting down with. Well, 

Ian and his lovely wife Fiona. Under the shadow of 

the unmissable Kenworth that brought me up here, 

and with a plate of the most amazing homemade 

cupcakes in front of me, I learnt all about the Wild’s 

Livestock story. 

Wild’s Livestock began way back with Laurie and 

his first truck, a Chev Blitz. The Chev hit the road for 

Laurie during the 1950s and was the first dedicated 

livestock vehicle for the family. That little truck did 

the job for a few years but, eventually, there was 

more work than it could handle, not only moving 

stock for the family farm, but also doing work for 

other farmers as well. So, goodbye Chevy and hello 

to a classic six-tonne J2 Bedford. 

The Bedford’s arrival came around the same time 

that Ian was returning from a two-year stint at the 

Emerald Pastural College. 

Having left chool, he headed off o the college 

to gain both his truck licence and a more in-depth 

agricultural knowledge. Though, he jokingly admits 

that: “I really only learnt how to play up.” 

With a truck licence in tow, he returned from two 

years of study to the family farm and worked there 

Taking over pig transport in the ‘80s led to the name 

Grunter Hunter. The current Grunter Hunter came into 

being in 1994 and has been working hard since

Review 


43

Review 

for a while. Unfortunately, the early seventies saw 

dramatic falls in cattle prices and the farm was 

going through a very lean patch. 

There was enough work to keep Laurie busy but 

Ian chose to head off p to central Queensland and 

refine his truck driving skills working for some other 

companies, gaining valuable experience in tankers, 

flattops and general freight. He learned all aspects of 

the transport industry. 

FAMILY AFFAIR 

1976 saw Wild’s Livestock really kick off hen Ian’s 

brother Rod decided to return to work the family 

farm and help reinvigorate the transport side. 

Rod had spent several years with AML&F as a 

stock and station agent, so he was no stranger to 

the farming world. When he came back to the farm, 

he purchased a single-drive 1976 Bedford with a 

6V53GM motor as well as a single deck bogie axle 

trailer. Fitted with straight pipes it was often joked 

‘that’s the truck where the cattle wear earmuffs’. The 

big 216hp (161kW) engine was worked very hard as 

Rod kept it busy moving stock all over the area. 

In 1979, Ian returned home and purchased his 

own Bedford, this time with a tri-axle trailer and a 

3x2 convertible stock crate on the back. Ian testifies 

he could get 430 lambs on the old girl, but I would 

hate to guess how hard that was pushing the old 

190hp (142kW) engine. 

Even with the two semis and the old family body 

truck the workload was increasing and, in 1980, 

Wild’s Livestock purchased its first Kenworth, an ex- 

Shell S2 that Ian hooked up under his 3x2 tri axle – off 

he went carting lambs with a bit more power to enjoy. 

“It knocked a couple of hours off he job with that 

S2,” admits Ian. 

Things changed again for Wild’s Livestock in 

1984, when Syd Laverty (an old mate that Rod and 


Ian worked with) passed away. Rod and Ian were 

approached by Laverty’s wife, Dawn, to see if they 

were interested in taking over the local livestock 

transport part of the business. This acquisition 

brought with it a change in setup as well as a change 

in customer base. 

Laverty’s work had predominantly been based 

around calves and pigs. Lots and lots of delicious 

pigs actually. So much so that it led to Ian’s infamous 

nickname (now seen on the top of the Kenworth) 

Wear and tear is visible, but with it still going strong 

there’s no restoration planned as yet

02 4423 3499 

After Hours 0429 233 577 

sales@elgra.com.au www.elgra.com.au 

21 Central Ave, South Nowra, NSW, 2541 

HYDRAULIC PERCUSSION 

POST DRIVERS FOR TRACTOR, 

SKIDSTEER & FEL 

Cement 

Mixer 

(Paddle) 

2 Sizes available, 

Suit Skid Steer, 

Excavator, 3PL, FE 

From 

$7,920 + GST 

PDX 

Series 

4 Cell Options, 

Suit Skid Steer, 

Excavator, 

FEL or any 

wheeled 

loader. 

From 

$8,310 + GST 

89 

Series 

Driver 

Available in 2.5 

(Standard) & 3.6 

(Hi Lift) under 

the Anvil, 4 Cell 

Options From 

From 

90 

Series 

Driver 

Designed 

specifically 

for Skid Steer, 

Excavator, FEL 

or any wheeled 

loader. 4 Cell 

Options. 

From 

$16,230 + GST $13,990 + GST 

FFM-FP-5034644-TS-400 

Australia’s most POWERFUL & VERSATILE Percussion Driver 

***All El-Gra Post Drivers comply with Work Cover and other State laws.***

Review 

‘Grunter Hunter’. With the new workload came 

a Mercedes 2232 bogey drive body truck as 

well as a two-axle dog trailer, both having 3-by-2 

livestock crates. 

Ian speaks very highly of Laverty, crediting his 

out-of-the-box thinking, even back then. 

“Syd was a very innovative bloke. Long before parcel 

express came up with belly boxes, Syd had one 

of his own on the dog trailer, which would fit about 

20 bacon pigs or thirty lambs.” 

Ian does admit, though, that there was a hell of a 

challenge getting them out. 

With the purchase of Laverty’s work and the 

advent of four-deck sheep trailers, the Wilds left 

the interstate lamb job to the blokes with the 

four-deckers so that they could concentrate on 

their growing southern Queensland customer base. 

Side note here, the extra room in the Mercedes 

cab was a bonus for Ian’s growing family. Ian had 

married Fiona in 1982 and, by the time the Merc 

was purchased, the couple had welcomed their 

youngest child, Jessica, into the world. 

Ian handed the keys of the Kenworth to his 

brother, Rod, and took advantage of the spacious 

Mercedes cab to bring his family along with him. 

Young Jessica spent the majority of her early 

years in the bunk of the Mercedes as she travelled 

around with mum and dad. I could not get a quote 

from Jessica but I’m sure all that time in an old 

Merc would have been, as parents put it ‘character 

building’. 

CUSTOM KENWORTH 

Back on task. The mighty Mercedes served Wild’s 

Livestock well for several years and through some 

major changes, mainly Rod and Ian deciding to 

split. Rod took the Kenworth and concentrated on 

the local work, with Ian and the Mercedes servicing 


After 27 years this Kenworth has covered millions of 

kilometres. Parts have been replaced over the years but 

the original Meritor 46/160 diffs are still goin 

those customers further away. Ian continued 

with the Mercedes for a couple of years before its 

limitations led to the inevitable replacement. 

“It was a good truck, but we couldn’t get the 

two levels on the front of the truck,” explains Ian. 

“It wasn’t a full height two-deck stock crate.” 

The decision was made to approach Kenworth 

about building Wild’s a rather unique setup. Ian 

knew of quite a few eight and 10-wheeler trucks 

It was hard; they had 

no idea where to 

put the drive to 

carry the weight 

running around the central Queensland at the time, 

so he had a rough idea of what would work. Having 

taken into account the variety of work that Wild’s 

Livestock were picking up and the locations they 

had to enter, it made sense to stick with a truck and 

dog combination. They just needed a custom truck 

that could get a full load on and remain versatile. 

The first issue was the length limits. In 1988, they 

were operating under the 17 and a half metre rule 

and the intent was to use the two-axle dog the 

Mercedes was towing, behind the new Kenworth. 

That meant the crate behind the Kenworth would 

need to match the trailer, at 22 feet (6.7m). 

Bring on the Kenworth engineers. They drew 

up some designs and sent them to Ian. Other ideas 

were floated and, as is often the case, they were 

quickly redrawn. 

“The first plans they sent me, you’d have to weld 

the nut of the ring feeder on the rear diff o get it to 

fit,” jokes Ian. 

“It was hard; they had no idea where to put the 

drive to carry the weight.” 

In the end, to help work it out, Ian and Brian Russ, 

an engineering mate, drew out a life-size plan on the 

floor of the shed. 

“We could physically see what it looked like and 

could work out where the drive needed to be.” 

When it came to speccing up the Kenworth’s 

running gear, Ian worked with his good mate from 

Detroit, Bob Nolan. The only stipulation Ian had 

was: “I wanted an 892 in it!”, as much as Bob tried to 

convince him otherwise. 

“The whole time Bob kept trying to insist, ‘forget 

about the 892, get a series 60’,” Ian recalls. “No, no, no, 

don’t trust them, those f#$kin electronic motors. I’m 

sticking with the 892.” 

For six years the Kenworth flew along, quite 

literally actually. 

“It was good for 140, with a full two decks on,” 

admits Ian, with a guilty grin. It seems that the 892 

was living up to its reputation. Let us not forget to 

add that it wasn’t always Ian either; Fiona had her 

fair share of time behind the wheel of the Kenworth. 

I have faith that she kept it closer to the speed limit. 

So, with a lot of help from the right people, the 

first ‘Grunter Hunter’ hit the road in 1988 with the 

original two axle trailer in tow. 

In 1991, Ian and Fiona chose to upgrade the fairly 

well worn two-axle dog trailer. Ian wanted the same 

length but a three-axle version. He approached 

Mark Johnston at Haulmark Trailers. Johnston, who

APPLICATIONS FOR PUMPSETS 

Aquaculture water circulating Pumpsets 

Mining Dewatering Pumpsets 

Agricultural Irrigation Pumpsets for Pipe & 

Riser systems 

Lift Pumpsets for farm channels 

Recycle dam Pumpsets 

River Pumpsets 

Pumpsets for Irrigation Pivots & Lateral 

irrigators 

Transfer Pumpsets 

ADVANTAGES OF A PIPE AND RISER SYSTEM 

OVER AN ON FARM CHANNEL SYSTEM 

No loss of water when filling Farm Channels 

No more fixing leaking bayoutlets & channels 

Removal of farm channels will increase crop 

acreage 

Easier access around your farm 

Uneven ground conditions make gravity farm 

channels impossible to accomplish without 

major earthworks 

This system will save you both time and money 

WE OFFER: 

Pumped Pipelines 

Gravity Pipelines 

Reuse Irrigation Systems 

Road Crossings 

Submersible Pumped Systems 

Sewer Pipelines 

Water mains 

ADVANTAGES OF A CENTER PIVOT & 

LATERAL MOVE IRRIGATOR 

Precise application, both these systems can be 

set to deliver a prescribe volume to match the 

requirements of the crop in the ground. 

Efficient water use, which prevents water runoff. 

High degree of automation which can reduce 

the amount of labor required. 

System can operate at lower pressure that 

other types of spray irrigation saving on 

energy costs. 

A center pivot or lateral system is applicable 

to almost all crops including arable crops, 

vegetables, and fruit trees. 

Cuts down on water usages compared to flood 

irrigation. 

Less land forming, these systems can work on 

rolling topography. 

FFM-FP-5204815-CS-397

Review 

Fiona and Ian Wild 

knew the diversity of Ian’s work, jokingly remarked: 

“I’ll build the trailer and you build the crate.” So 

that’s exactly what Ian did: designed his own 

custom crate. 

ENTER LEFT 

Now we are up to 1994, where the current Grunter 

Hunter come into creation. The need for it was purely 

based on the poor old 892 having a couple of minor 

issues and the gearbox having some major issues. 

After just having the head off t and repairing a 

leaking water jacket, Ian was getting the truck towed 

after a clip broke, resulting in one of the cogs in the 

gearbox running up and down the shaft. The truck 

was getting towed to Brisbane Diff & earbox, so on 

its way Ian decided to pop into Kenworth and just 

order another one. 

With the original plans still available, it was a lot 

easier ordering a replacement. There were a couple 

of minor changes: the 8V92 was replaced with a 

series 60, the 15-speed replaced with an 18 and 

a party hat fitted rather than the original wind 

defl ctor. 


After these the new truck was on its way. Hardly 

anyone was able to pick the difference. Aside from 

the fact that Ian was no longer whooshing past at 

warp speed. 

That is how the second ‘Grunter Hunter’ came 

to fruition. That was 27 years ago. Since then it just 

has not stopped. It did slow down a little, around 

the 2.5 million kilometre mark, for the old 430hp 

(321kW) Series 60 to get replaced with a 500hp 

(373kW) version. 

The clutch, gearbox and radiator were 

given some love at the same time. Aside from that, 

the big beast has just kept going. Even the original 

Meritor 46/160 diffs are still in action. With the 

exception of a couple of pinion seal replacements, 

they are still as good as new. 

It is now in excess of 3.5 million kilometres and 

still going strong. “Not like its owner and driver who 

is definitely slowing down,” says a smiling Fiona. 

Cosmetically, however, the Grunter Hunter definitely 

shows its age. 

Even with the outstanding Wild’s Livestock 

colour scheme, you can still see the old Kenworth 

has worked extremely hard for its money. I am sure 

it has more than paid for itself. 

So the question had to be asked, don’t you think 

it could have been upgraded by now, mate? Did I 

also mention it is looking at its third set of crates 

already as it’s worn out the stock crates? So why 

not the truck? I did ask and Ian jokingly recalls 

getting asked the same thing by Rob Brown at 

Brown & Hurley. 

“He asked me when are you going to buy a new 

truck and I said, Why? This ones still going.” He 

added in a complimentary dig as well, telling him: 

“You built too good a truck.” 

Ian added in a very poignant compliment to end 

our interview. 

“Haulmark Trailers and Kenworth Trucks have 

achieved my personal philosophy of ‘be lazy, do the 

right job the first time round’.” 

It is fairly evident that the job has been done right 

and with the truck approaching four million kilometres, 

it looks like I’ll be waiting a long time to get 

the restoration story out of Ian Wild. I will have to be 

happy with a ‘still hard at work’ story instead.

Hay Handling, think Muller... 

SEASON 

SALE OFFERS 

FROM $4.5K! 

ACCUMULATORS 

6 TO 15 FOOT SLASHERS 

MANUFACTURED IN AUSTRALIA 

TO AUSTRALIAN STANDARDS 

CHASER BIN 

GRABS 

07 3085 2987 

sales@mullerfab.com.au 

www.mullerfab.com.au

Harvesters 

Fendt’s straw walker combine harvesters will be 

available in Australia sometime in 2022 

Guiding light 

Optional lane guidance systems and straw distribution systems are among the 

updates made by Agco to Fendt’s 2022 line-up of Ideal combine harvesters 

The improvements for Fendt’s Ideal models as well 

as new features for Fendt’s straw walker combine 

harvesters will be available in Australia sometime in 

2022, local Agco representatives have confirmed to 

Farms & Farm Machinery. 

Upgrades to Fendt’s Ideal 2022 model of combine 

harvesters mean the machine will be able to work to 

an accuracy of 2cm using its lane guidance system 

in conjunction with the real time kinematic (RTK) 

correction signal. 

Currently, Fendt Ideal harvesters have included 

the VarioGuide tracking system and a NovAtel or 

Trimble receiver as standard on the harvesters. 

However, the latest RTK signal is available as an 

optional extra. 

Using the RTK correction signal to sustain the 

lane guidance system, entire fleets are able to 

work in the field by consistently following set tracks 

and avoiding any offsetting to increase efficiency. 

Controlled traffic farming is also possible to 

VarioGuide with RTK. 

Both Ideal 7 and Ideal 8 models have been 

equipped with a new, narrower range of tyres 

to make travelling on narrow roads easier. The 

new range of tyres mean both models reach a 

width of less than 3.3 metres with maximum 

contact area. 

Upgrades to the Fendt Ideal 9 have also been 

made, with the cleaning system reworked to boost 

the machine’s overall performance. With the new 

system, grain drops down to the top sieve through 

two curved double drop steps that, given the 

curved shape of the steps, means heavy grains 

gather in the lower section while lighter parts 

accumulate above. 

The curved steps also mean the Ideal 9 has a 

wider air outlet, which allows the cleaning proves 

to be even more efficient given the increases to the 

air volume. 

“With two drop levels, most of the short straw and 

chaff s separated on the first level,” says Fendt. 

“The remaining non-grain components are 

separated on the second. The cleaning system 

works over four sections, two return floors 

ensure even distribution and coverage across 

the preparation floor.” 


Fendt’s ActiveSpread SwingFlow straw 

distributor – an optional spreading option – has 

also been designed for tough harvesting conditions 

and achieves even more distribution in humid 

harvest conditions. 

Fendt’s 2022 range of straw walker combine 

harvesters, including E, L and C series models, 

have been tweaked to meet Stage V European 

emissions standards. 

Fendt’s unique horizontal levelling feature, 

which was first introduced in 2020 on the new fivestraw 

walker C series, is also available and 

can compensate for slopes of up to 38 degrees. 

Both the Ideal and the C and L series straw walker 

combine harvesters can also now be equipped 

with Fendt Connect telemetry system – a software 

Most of the short 

straw and chaff is 

separated on the 

fi st level 

The optional addition of RTK means an accuracy of 

2cm in the lane guidance system can be achieved 

package that aids farmers in managing their fleet 

remotely. It comes standard on all Ideal models and 

is optional for C and L series straw walker models. 

Fendt Connect can be viewed on computers or 

smart devices where operators and dealers can 

view and analyse machine data, such as machine 

position, and CAN bus data, such as engine speed, 

fuel and machine speed. Fendt says customers 

always retain ownership of their machine’s data. 

Customers of Ideal harvesters can also view 

harvest data, including yield and moisture, 

using the system.

BYPY TRANSMISSIONS 

PTO Shafts and Gearboxes 

For all your power transmission requirements 

HORSEPOWER: 12 Hp TO 360 Hp - We have the best range in Australia 

FULLY STOCKED WITH EVERYTHING 

YOU WILL NEED FOR THE SEASON 

We also stock an extensive 

range of spare parts for PTO 

shafts and gearboxes 

Call Toll Free 1800 932 113 

bypy@bypy.com.au | www.bypy.com.au 

BYPY Transmissions-Australian Distributor of Bondioli & Pavesi and BIMA 

FFM-HH-5190089-TS-369

Harvesters 

Western Australia is likely to see the greatest impacts of 

climate change on crop yields, with substantial projected 

declines in winter rainfall 

Each new 250 Series combine now also includes 

a subscription to Case IH’s AFS Connect 

TELEMATICS 

AFS Harvest Command continues to raise the 

bar in combine automation 

All under 

control 

Case IH’s AFS Harvest Command, available on the Case 

IH Axial-Flow 250 Series combine harvesters, monitors 

everything from ground speed and engine load all the 

way up to feed-rate control and sieve settings, which 

are based on the feedback received from the loss 

sensors, a grain camera and sieve pressure sensors. 

These sieve pressure sensors are unique to CNH 

Industrial brands, including Case IH’s AFS Harvest 

Command product, providing for the relay of data 

concerning the load on the sieve, which in turn allows 

the system to determine the difference between sieve 

overload and blow-out losses. A grain camera monitors 

grain quality, including cracked and broken kernels, as 

well as foreign material, allowing for the adjustment of 

settings as required. 

In fact, the AFS Harvest Command automation on the 

250 Series uses 16 sensors to control a total of seven 

combine functions. 

“AFS Harvest Command is designed to maintain the 

greatest efficiency for the operator in all conditions, 

improving grain quality and grain savings through 

sensing and optimising machine settings,” says 

Tim Slater, Case IH Australia/New Zealand product 

manager for hay and harvest. 

Recently, the number of crops it’s designed to operate 

in has been expanded beyond corn, soybeans, wheat 

and canola to now include barley and rice. 

Each new 250 Series combine now also includes a 

subscription to Case IH’s AFS Connect with file transfer 

and telematics. 

AFS Connect is a tool that enables a machine in 

the paddock to be monitored by a customer from 

anywhere with an internet connection. 

“The customer can also then give permission for 

their dealer to see similar information, which can help 

diagnose any potential faults and more efficiently deal 

with any necessary repairs,” says Slater. 

“Machine, harvesting and yield data are automatically 

sent to the AFS Connect portal where it’s processed 

and ready to be viewed via web browser or mobile 

device. This negates the need to download the data 

from a USB in the combine, improving the safety of 

data and offering a more convenient option. 

“Two years on from the launch of AFS Harvest 

Command, these most recent updates and 

opportunities for customers only enhance the 

efficiency and productivity benefits that make this the 

most impressive combine automation product on the 

market.” 

CLIMATE CHANGE 

New management practices and new technologies have 

helped Aussie farmers offset the rising impa ts of climate 

change on crops, according to a new ABARES report 

Heating up 

Australian farmers are getting better at handling 

dry conditions, according to federal government 

statistics about the impact of climate change on 

agriculture. 

The Australian Bureau of Agricultural and Resource 

Economics and Sciences (ABARES) Insights 

report found that Western Australian cropping 

farmers, in particular, had withstood the dry conditions 

during the 2020 winter harvest with crops 

“far exceeding expectations given the seasonal 

conditions experienced”. 

Across the board, ABARES has cited technology 

and management practices as areas where farm 

productivity has increased. 

Productivity has risen 68 per cent in the cropping 

sector since 1989 when adjusted for climate, while 

the wider broadacre farming sector has risen by 28 

per cent in the same timeframe. 

“These gains in productivity have offset the 

negative effects of climate over the last 30 years, 

such that actual industry productivity levels 

have still increased or at least remained stable,” 

the report says. 

These productivity gains have been necessary 

because seasonal conditions have reduced the 

annual average farm profits by 23 per cent in 

the past two decades, the report found, which is 

$29,200 per farm. 

Despite this, Australian farms have shown strong 

adaptability in the past decade, helped also by 

strong commodity prices, particularly for livestock. 

“A combination of productivity growth, better 

prices and increases in farm size have resulted in 

an upward trend in farm profits over the last decade, 

at least until the droughts of 2018–19 and 2019–20,” 

says ABARES. 

“Much of the adaptation effort on farms has been 

directed towards improving performance under 

dry conditions. 

“Within the cropping sector, for example, there 

have been a variety of management practice 

changes implemented in recent decades 

(including conservation tillage and soil amelioration) 

focused on preserving soil moisture as an 

adaptation to reduced growing season rainfall.” 

Another finding of the report is the “risk of very 

low farm returns due to climate variability” has 

doubled during the same time period from a 10 

per cent frequency to 20 per cent. 

South-western and south-eastern Australia have 

been the areas most impacted by the changing 

conditions, says ABARES. 

This trend was tipped to continue according to 

2050 projection scenarios. 

“Cropping farms in Western Australia are more 

heavily impacted than other regions under most 

climate scenarios, due largely to the more substantial 

projected declines in winter rainfall and the 

resulting effects on crop yield,” says ABARES. 

Cropping regions in Australia’s north-east, 

particularly around Queensland, are forecast 

to be the least impacted by climate changes 

in the next 30 years. 

ABARES also says there are several factors 

which will impact future productivity, which 

includes the extent of climate change impact in 

Australia compared to other nations. 

“It remains hard to predict future productivity 

growth, particularly the extent to which new technologies 

can improve the water use efficiency of 

crop and pasture systems beyond current levels,” 

it says. 

“In the long-term, there may be pressure for 

more transformative change, at least where 

productivity growth is insufficient to offset the 

effects of climate change. 

“This could include the emergence of new land 

use activities such as carbon abatement, biodiversity 

conservation, or renewable energy generation 

as complements to traditional farming.” 


Harvesters 

Victoria’s Grain Harvest Management Scheme 

saw improvements in compliance with mass 

limits when transporting grain 

Well stocked 

Grain trucks were more compliant with mass limits in Victoria during the last harvest 

season despite a significant increase in total yield, according to a new report 

Breaches fell 1.6 per 

cent to 16.9 per cent 

of all deliveries in 

2020–21 

A scheme to help grain truck drivers load their 

vehicles more accurately saved more than 8,000 

trips over a substantially stronger harvest season. 

The 2020-21 Harvest Period Report into Victoria’s 

Grain Harvest Management Scheme (GHMS), 

released in July by the National Heavy Vehicle 

Regulator (NHVR), showed strong improvements in 

compliance. 

The GHMS was designed in response to industry 

calls that protested the difficulty many have with 

heavy vehicle mass limits when loading grain for 

transport. 

Uncertainties around the changing density and 

mass of grains and other crops when being transported 

can create difficulties during the process of 

loading trucks with grain before they are sent to a 

grain receiver. 

First launched four years ago, the GHMS allows 

scheme-registered vehicles an extra mass allowance 

of up to 5 per cent above the statutory general 

mass limit for vehicles when delivering grain to a 

participating grain receiver. 

According to VicRoads, the scheme allows for an 

efficient grain harvest while helping to eliminate 

overloading on road systems. 

The report, which is based on data provided to 

the NHVR by participating grain receivers Emerald 

Grain, Viterra, CHS Broadbent, GrainFlow, Ridley 

Agriproducts, GrainCorp and Teys, says a total of 

7,048 vehicles delivered grain to these facilities 

during the last harvest season. 

Interest in the scheme has grown year on year, 

with a 32.6 per cent rise in participating vehicles 

in 2020–21, with 399 vehicles participating in 

the scheme and 18,522 deliveries made by those 

vehicles. 

While the GHMS vehicles only represented 5.6 per 

cent of all vehicles used to deliver grain, the report 

says vehicles registered under the scheme made 

more trips to grain facilities, transporting 9.8 per 

cent of all grain delivered. 

Covering the period from 1 October 2020 to 21 

May 2021, the most recent GHMS report shows 

that, despite an increase of 25 per cent in Victoria’s 

total harvest size to 5.2 million tonnes, the number 

of mass limit breaches were the lowest recorded 

under the scheme to date. 

According to the report, the number of total 

breaches fell 1.6 per cent to 16.9 per cent of all deliveries 

in 2020–21; an improvement on the previous 

year, when 18.44 per cent of all deliveries were in 

breach. 

Most breaches of the legal weight limits were by 

under one tonne, with the report saying extreme 

mass breaches (of over three tonnes) had reduced 

to 2.5 per cent in 2020–21, compared to 3.3 per cent 

the year before. 

For vehicles registered under the GHMS, the rate 

of non-compliance had dropped significantly, to 

9.35 per cent of all vehicles in 2020–21 – compared 

to 25.16 per cent in 2019-20. 

Of the total deliveries made in Victoria in 2020–21, 

57.36 per cent were made in a vehicle loaded within 

95 per cent of its allowable mass limit – a figure 

that actually drops to 54.46 per cent among GHMS 

participants. 

Nonetheless, with the GHMS weight allowance, 

alongside concessional mass limits, higher mass 

limits, performance-based standards and other 

concession types, a total of 8,524 trips were saved in 

2020–21 – an improvement on the 6,661 trips saved 

the previous year. 

Applications open in September for companies 

wishing to participate in the scheme for the coming 

harvest season, but parties wishing to join the 

scheme must own a vehicle manufactured on or 

after January 1, 2002, and be delivering grain to a 

participating receiver. 

ON THE ROAD 

According to the report, the most common vehicle 

type reported delivering grain to receiver facilities 

were prime mover and semi-trailer combinations 

with six axles, followed by B-double vehicles. 

The average year of manufacture for the fleet 

completing the grain transport task has increased 

from 1982 to 1995 since the introduction of the 

Scheme four years ago, with the median year of 

manufacture now sitting at 2003. 

The number of vehicles that are over 40 years old 

delivering grain has also dropped significantly in 

the last four seasons, the report says. 

The findings come as the NHVR launches a new 

campaign to encourage road users to give agricultural 

vehicles extra space on the road ahead of this 

year’s planting and harvest season. 

NHVR chief executive Sal Petroccitto said the 

recent increase in Australians moving to regional 

communities in the past year meant more traffic 

for agricultural vehicle drivers to safely navigate 

during the up-coming harvest. 

“We know up to four out of five crashes involving 

a heavy vehicle are caused by light vehicle drivers, 

so it’s important motorists understand how to 

safely share the road with heavy vehicles,” says 

Petroccitto. 

“Tractors, grain harvesters and air seeders all 

have limited turning ability, visibility of other vehicles, 

speed range and space on our roads. 

“If you’re travelling near an agricultural vehicle, 

please be patient, reduce your speed, maintain a 

safe following distance of two seconds or more, and 

only overtake if it is safe to do so. 

The NHVR has launched a new website with information 

about sharing the road safely with heavy 

vehicles – www.weneedspace.com.au – which had 

a video and information package encouraging 

drivers not to overtake turning trucks at the time of 

going to press. 

“If an oversized ag vehicle is approaching you 

from the opposite direction, you may need to pull 

over safely to let them pass,” says Petroccitto. 

“It’s these simple tips that will help reduce risk for 

all road users and ensure everyone arrives safely at 

their destination – whether it’s to the silo, stockyard 

or home.” 


BIGGER 

TRUCK RANGE 

BETTER 

DRIVABILITY 

BEST 

SERVICE NETWORK 

Loads 

Better. 

When you make a truck as good as the Quon, 

you know it can take the load, no matter the job. 

From cattle to sheep, from yard sales to hay bales, 

the Quon delivers the ultimate in flexibility and 

dependability. With Quon's outstanding drivability, 

advanced safety features, optimal uptime and 

the best service network in Australia, it’s hard to 

find a truck that handles the load any better. 

Going the Extra Mile 

To find out more, contact your UD Trucks dealer on 1300 BUY A UD or visit udtrucks.com/australia 

Follow us on 

Proudly part of Volvo Group Australia

Harvesters 

Anything John Deere 

puts their name to 

has been held to the 

highest standard 

Trusted friend 

John Deere’s Plus-50 II Premium engine oil and Hy-Gard hydraulic and 

transmission oil help ensure that Barry McCormack’s John Deere fleet of 

equipment stays in top shape 

Third generation Marrar-based grain grower Barry 

McCormack knows John Deere’s lubricant range 

is tailor-made for the manufacturer’s machines, 

ensuring genuine oils are used across his entire 

green fl et. 

John Deere Plus-50 II Premium engine oil and 

Hy-Gard hydraulic and transmission oil are fundamental 

to the operation of his John Deere 9600 

combine harvester, as well as his 4250, 8220, and 

3130 tractors, which he uses to farm his 600 hectare 

cropping enterprise in the central Riverina district 

of NSW. 

“I know anything John Deere puts their name to 

has been held to the highest standard, which makes 

their oils good enough for me,” McCormack says. 

“As they are made to John Deere specification, I’ve 

had no issues across my machines and have been 

using their genuine products since they first came 

on the market.” 

The John Deere lubricant range is formulated to 

perform under heavy loads and dry conditions, 

which is a requirement for McCormack on his home 

property, Glenwood, which he runs in partnership 

with his wife Helen and son Steven. 

This year the family sowed canola, wheat, lupins 

and barley across their sandy loam soils, and is 

currently rolling out a spraying and spreading 

program. McCormack says the genuine product 

range also gave him peace of mind his equipment 

was working at its ultimate performance, which 

helps drive productivity. 

Seasonal conditions have varied widely in recent 

years, so efficiency has never been more important, 

McCormack says. 

He relies on his John Deere equipment to make 

the most out of every crop. Despite the peaks and 

troughs of climatic conditions, he still finds growing 

grain rewarding.“When you are sitting up in a 

header and seeing a great crop roll straight up the 

front of it, there is nothing that beats a sight like that,” 

he says. 

Third generation Marrar-based grain grower 

Barry McCormack ensures John Deere’s genuine 

oils are used across his full equipment fleet 


Your Partner 

in the Field 

For more than 30 years, Alpego has served the 

world’s finest profession – yours. 

Founded to give you the best every time, with Alpego 

you know you’re buying the finest cultivators, 

harrows, seed-drills and rotary hoes, supported 

by solid Italian tradition. 

Contact your local dealer to find out more. 

Dealer 

enquiries 

welcome 

Find your nearest dealer 

03 5998 3216 

gendoregroup.com.au

Harvesters 

New Holland NutriSense nutrient analysis technology 

helps farmers make better informed decisions 

Measurements 

collected by the 

machine can detect soil 

contamination in forage 

Sensitive type 

New Holland has added its NutriSense in-harvest nutrient analysis system to its MyPLM 

Connect precision agriculture portal to help farmers improve crop quality 

New Holland has added the NutriSense nutrient 

analysis system to its MyPLM Connect precision 

agriculture system in European markets. 

The system, which is not currently planned for 

release in Australia, will provide farmers with 

valuable agronomic measurements such as crop 

moisture, starch, crude protein, fibre, ash and crude 

fat content across the field. 

Farmers can also visualise the data through the 

MyPLM Connect interface to make more informed 

decisions to enable them to extract the most profit 

out of the crops. 

Global head of product marketing for MyPLM 

Eduardo Nicz says farmers will now be better able 

to visualise crop nutrient data collected by their 

machines at harvest. 

“Our strategy at New Holland is to integrate digital 

technologies to deliver a smart and connected 

agriculture to our customers, with easy-to-use 

solutions,” says Nicz. 

“The NutriSense system is an excellent example: 

it provides farmers with detailed agronomic data 

collected by their New Holland combine or forage 

harvesters in the field. This will enable them to use 

their inputs most efficiently and harvest a crop they 

will sell at better prices.” 

NutriSense was awarded the silver medal at the 

SIMA Innovation Awards in 2021. 

When used on New Holland’s FR Forage Cruiser, 

the NutriSense system can be used to help the 

farmer understand and manage their field health 

and performance using year-on-year field data. 

Measurements collected by the machine can 

detect soil contamination in forage – helping them 

enact safeguards – and a crop moisture detector 

can help the farmer make decisions about the 

storage of animal feed. 

The system also helps farmers understand when, 

and how, crude protein, crude fat and starch content 


of crops will improve animal feed ration content 

and quality, meaning a healthier, higher quality of 

animal feed is produced and capable of being sold 

at a premium price. 

Cash crop operations can also benefit from the 

NutriSense when used on New Holland CR, CX7 

and/or CX8 combine harvesters – using its year-onyear 

field data to manage and improve field health 

and performance. 

The system can measure crop protein levels, 

which will be useful when calculating fertiliser 

application rates for coming seasons, while 

detecting starch levels helps farmers understand 

the suitability of a crop for bio-fuel production. 

Detecting a crop’s protein content helps 

farmers to better determine whether the crop 

is suitable for milling wheat, which earns more 

profit, or for animal feed – and knowing the potential 

value of a crop at harvest will also help farmers 

Year-on-year field data can be used manage and 

improve field health and performance 

make better decisions about how to store the crop. 

New Holland global head of product management 

for crop harvesting Lars Skojoldager Sorensen says 

the combines themselves have a “massive capacity 

with outstanding grain quality”. 

“The NutriSense system gives our customers an 

additional advantage: the detailed information on 

nutrients enables them to optimise the use of inputs, 

determine the best way to manage their crop, and 

understand value of their crop to obtain the best 

price for it.” 

New Holland also says it expects to continually 

expand its functionalities of the MyPLM Connect 

app, with the NutriSense system’s visualisation of 

data the latest addition.

Designed for hay, engineered to last. 

Get in before June 2021 price-rise 

15 Bale Accumulators Option 

to add weighing scales, density 

controller and/or fold up table. 

Custom Trailers 

10 Bale Accumulator - Built 

to suit VIC customers making 

longer bales. Option to add 

weighing scales and density 

controller 

10, 15 or 20 Bale Hay Grabs - We 

build regular, heavy duty, tautliner 

and grabs for VIC customers with 

longer bales. Option to add a 

side-shift. All loader attachments 

available. 

Stick rakes - All loader 

attachments available. 

Shop on our website for 

spare parts. 

Shuttle Chief 

3m x 2m 

Includes gate 

Stock Master 

4m x 2.4m 

Tipper with removable side boards, fold-down 

gates, center gate and under-tray tool box. 

Farm Boss 

4m x 2m 

Includes removable sideboards and gates. 

Hay King 

5m x 2x4m 

Includes removable hay racks. 

FFM-HH-5168768-TS-394 

Option to add on side boards, removable racks, tool box, tipper, aluminum ramps, stock crates or lashing rings. 

Moving hay, the easy way 

P | 02 6852 2049 

www.rebelequipment.com.au 

24 Blayney Street Forbes, NSW, 2871 Australia 

Terraland TO 6000 Swifterdisc XE 12400 

• Super deep ripper! Rips down to 60cm (24 inches) 

• One pass operation to super deep rip, mix clay and 

incorporate lime that also packs the surface for an 

excellent seed bed. 

• The most economical way to transform poor to 

average sandplain into highly productive country in 

one pass! 

• Medium to heavy country is also responding with 

great results! 

• Special aggressive A-discs, produce the best 

stubble cutting and mixing action. 

• Excellent for incorporating lime and stubble at depth 

and levelling the paddock. 

• Kills weeds and leaves an impressive seedbed with 

the moisture locked in by the V-ring packer! 

• Fixes your seeding trash flow problems in one pass! 

TO AVOID DISAPPOINTMENT ORDER 

NOW TO SECURE DELIVERY 

Call Grant Borgward 

0428 816 701 

FFM-HH-5210450-TS-349

Review 

With the ability to feed pretty much anything you want, Hustler’s 

Combi RX218 feed wagon is big and bold, and very capable at what 

it does 

Words Jaiden Drought 

Images Oliver Brunton 

Ultimate 

all-rounder 

F 

or 60 years now, Hustler has been 

redesigning its machinery line-up into 

sleek-looking, ‘outside the box’ designs, 

incorporating the ideas and on the ground opinions 

of the very people who purchase and use the 

machinery. This, along with the recent ‘MiNT Edition’ 

colour scheme change, has farmers highly invested 

in the launch of the new Hustler RX wagon range, 

moreso the big daddy: the RX218. 

I’ve spent some considerable time with this 

wagon, which is the result of six years of thoughtful 

research, development and refinement. In true 

Hustler style, the company opted to do something 

more creative than the norm to release this 

machine – investing in a roadshow around New 

Zealand, taking the RX218 to farms from the bottom 

of the South Island to the top of the North Island. 

So, what makes the RX218 so special? The beauty 

of the RX is that it will feed almost anything or a 

combination thereof. 

That’s what makes it so popular; particularly 

for South Island farmers who feed bales, grass/ 

whole crop silage, maize, root crops, or any other 

concentrated feeds in large quantities to mobs all 

over the district. 

Customers want a hardworking, simple and bulk 

capacity machine. Hustler is upfront in saying that if 

you want to blend several feeds plus trace minerals 

and chop bales, then buy a mixer. If you want to feed 

a large variety of feeds in the paddock at all times 

of the year, and sometimes on the feed pad, with 

a simple reliable feeder that’s easy to use and isn’t 

going to need a digger if you get stuck, then the RX is 

a more sensible option. 

CONCEPT 

The Combi RX218 delivers two wagon concepts 

in one. The front right-hand chain elevator and 

side chain feed keeps forage moving to the elevator. 

Once this feed is exhausted, the rear pusher brings 

forward another chunk to be side shifted to the 

elevator. The machine delivers a huge 26 cubic 

metre heaped load capacity. 

A standout of the system is that the bulk of the 

weight isn’t moved all at once (saving chains) and 

the rear compartment (where the bulk of the feed 

is) is moved by two internally-ported rams. This 

means fewer hoses, no grease and no moving parts. 

Hydraulics beat chains all day in my opinion. The 

flat floor runs seamlessly between the rear bed and 

the cross conveyor. The bin allows two four-foot 

silage bales to easily be stacked across the width 

of the machine. This delivers the ability to keep a 

short overall length and low loading height, which 

Hustler is traditionally popular for. 

The only small problem with the rear pusher 

is the slot in the floor where the door slides. This 

means you can’t put concentrates like PK straight 

on the bottom to be mixed and maize silage will lose 

a small amount (which can be easily picked up in 

less than a shovel full), whereas silage presents no 

problems. If you do want to add feeds like PK, simply 

add maize or some other silage onto the bottom 

first, then the PK in the middle. As it goes through 

the chain elevator, the feed mixes very well. 

FEEDPAD KIT 

Bulk silage, maize and layered concentrates are a 

doddle to feed on the pad with the Hustler Combi 

RX218. The large elevator tilts over enough to allow 

significant clearance off he wall of the bin, while 

still enabling you to feed in the middle of the trough. 

Feeding bales on the pad keeps you on your toes 

as with all wagons. Fortunately, this is covered by a 

smart controller (more on that later). 

The elevator has a single ram for tilting. This 

prevents twisting of the elevator from a twin ram 

design (if one ram was damaged, had a leaking 

seal or wasn’t phased properly, and the two rams 

were out of sync, twisting could occur). On the RX, 

however, the pivot ram is tucked neatly away, as 

are the gearboxes, hydraulic motors, and hoses – 

all conveniently out of harm’s way. 

CONSTRUCTION 

The elevator and side feed chains use 12,000lb 

(5,443kg) roller chains with Bis-Alloy sprockets 

(this is Harden metal, more often used on digger 

and loader bucket cutting edges). The shafts use 

self-aligning bearings and are well covered away 

from acidic feed. 

The feed bars use two bolts on either side to 

connect right through the chain, so if bent or 

broken, do not require a chain link. Four bolts and 

the bar can simply be removed, and you can carry 

on feeding. This doesn’t impact the structural 

integrity of the chain and, more importantly, 

enables a quick fix. The chains all have adjustable 

tensioners, so as they wear, you can simply take up 

the slack again to prolong their life. 

The floor of the wagon is a real piece of ingenuity. 

Made from a durable plastic called Puck board, this 

hard-wearing plastic composite is made from the 


Review 

A 

B 

C 

same material they used to make ice hockey rinks 

(hence they can withstand the impact of hockey 

pucks even while frozen). 

It’s notoriously tough and easily handles large 

loads being dumped on it. Another benefit is that 

it doesn’t wear, like plate off teel, allowing the 

machine to look smarter for longer. The rear floor is 

15mm thick and the cross-conveyor floor is 12mm. 

It’s all much thicker, more flexible, and less 

prone to banging, vibration, and fatigue in 

comparison to steel. 

LOADING AND HAULING 

As mentioned, the low loading height is a real sales 

point of the RX. Another handy feature when loading 

are the snazzy MiNT edition white mudguards. 

These are now sloped so that mud and acidic 

forage don’t sit on the mudguards causing them 

to prematurely rust out. 

The ground clearance has been increased 

(particularly the side elevator), proving great for 

over humps and hollows in paddocks, as well as 

making it a lot easier getting into gateways and 

over races with a large crown on them. 

A significant proportion of the large RXs are used 

on multiple blocks where carting silage (and a lot of 

it) on the road is one of the main prerequisites in the 

job description. To cater for this, the tridem axles 

on the RX218 are all sprung, braked, and with a rear 

steering axle. 

The RX218 is shod on 500/45 R22.5 wide, low 

profile tyres, which are great for reduced ground 

compaction in the wet, as well as added safety on 

hills and smooth riding on the road. 

A 

The FeedLink (scales) allows accurate 

weighing regardless of whether the 

machine is on a tractor or the jack stand 

B 

The tilting elevator allows for easy 

feeding, even over a temporary fence 

C 

Feeding into troughs is straightforward 

and accurate 

D 

Tridem springs are on the RX218 model, 

with a walking beam tandem on the 

RX148 and 178 models 

E 

The tridem axle travelled exceptionally 

well on and off the roa 

SCALES AND FEEDLINK 

All RX models come ‘scale ready’. The load cells 

themselves on these machines are 120,000kg 

rated, nearly two-and-a-half times stronger than 

on its predecessor. This combined with the 

integrated positioning of the scales means you 

can get away with fewer load cells but still achieve 

accurate weighing. 

The RX218 comes standard with four scales on 

the main bin (as it runs a twin chassis for the sprung 

axles), and two up the front on top of the drawbar – 

delivering accurate weight whether the machine 

is on a tractor or the jack stand. 

D 

E 


61

Review 

Rear steering makes for a highly 

manoeuvrable machine 

Pluses 

The rear pusher is a game changer for root crops such as 

fodder beet. The soil and stones simply get pushed, so no 

more chains and sprockets getting a hiding 

Rear steering makes it very manoeuvrable for a large 

machine 

Spung axles mean it follows contours and travels well 

on the road 

Large load capacity 

Smart looking, well-built machine 

Feedlink is practical but also gives great flexibility 

Two-mode joystick with a pause button is awesome 

Front mesh and low loading height allow from the tractor 

cab excellent visibility of exactly what’s going on inside 

the wagon 

Level floor means feed transitions onto the cross floor well 

Puck board floor is durable and easy to replace if need be 

Minuses 

I’m impatient and I think the rear pusher should move 

faster. Having said that because you can move the pusher 

back (but can’t take the feed with it), you don’t want to get 

too greedy 

In certain situations on feedpads where the elevator can’t 

be tilted right down, a little bit of feed dropped off the 

elevator bars. On other pads, it performed flawlessly 

Hustler Combi RX218 

Round bales 10 per layer 

Medium square bales 10–14 

Large square bales (8ft long) 10–14 

Loose silage (load level) 21.4 cubic metres 

Loose silage (heaped load) 26 cubic metres 

Maximum load 17,000kg 

Overall width 3,035mm 

Overall length 9,180mm 

Overall height 2,650mm 

Standard tyres 500/45R22.5 flotation grip 

tread 

Axle Tridem steering suspension 

axle 

Brakes Six-wheel braking 

Weigh scales Feedlink weighing and feed 

management system 

Floors (bed floor/cross floor) 15mm HD Puck board/12mm 

HD Puck board 

Chains (bed/cross floor/ Twin 12,000lb roller chains 

elevator) 

Feed bars (bed/ cross floor/ 

elevator) 


Twin hydraulic rams/ 65 x 35 

RHS/40 x 40 RHS 

Joystick In-cab electric control w/ 

Bale and Silage modes 

Hydraulics required Three pair double-acting 

plus brake coupling 

Elevator 1,645mm-wide chain/slat 

Jack 80mm two-speed screw, 

with quick adjustment, 

designed to be used as 

quick hitch stand 

Neatly stowed above the drawbar is the ‘brains 

of the operation’ – connecting to the tech-savvy 

Feedlink. This app-based system is compatible with 

Apple iPhones and iPads. Feedlink gives a live reading 

of how much is in the wagon, and it also allows 

for herd feed management. 

As an example: say you had 10 tonnes in the wagon, 

and you want to feed this out to three different 

mobs. Mob one in paddock 6 gets four tonnes. Mob 

two in paddock 17 gets 3.5 tonnes, and Mob three 

gets 2.5 tonnes in paddock 54. This system is great, 

as it allows the driver to know exactly what to feed. 

An audible alarm will sound and the weight flashes 

red once the target is hit. Once in Wi-Fi or hotspot 

range, this can be sent for traceability back to 

management. It also runs a cumulative total, which 

allows you to see how much forage has been to each 

mob over a period (a month, or a season, etc). 

IN-CAB OPERATION 

The feed controller (separate from Feedlink) has also 

been upgraded with a new in-cab monitor. This has 

a switch at the bottom for either Bale mode or Silage 

mode. Bale mode allows you to control everything 

independently. The elevator needs to be engaged 

through one of the spools on the tractor, and this 

needs to be constantly pumping. You can then move 

the rear pusher door backwards or forward, and 

move the cross floor left or ight. 

My favourite feature of the whole wagon is a 

button on the end of the joystick, which pauses 

everything. This is outstanding for feeding bales. 

10 silage bales are a doddle. 

15 per load is easily achievable 

As bales tend to behave badly when being fed out 

(on any machine), the ability to let the core roll back 

into the wagon is epic. 

Alternatively, if you can see a large lump going 

over the elevator, you can pause it, let some drop; 

then let the pause button out for a second so a little 

bit more drops and so on. This is also handy when 

feeding on a feed pad for the same reason. 

Silage mode is more automated. The rear pusher 

is still operated manually (and the pause button 

can still be used), but the cross feed and the elevator 

work in unison based on clever load sensing valves. 

SUMMARY 

In general, I think the majority of people were 

staggered when Hustler announced that it was going 

to drive a Valtra T174 and theRX218 wagon all the way 

from Invercargill to Whangarei. To put it bluntly, they 

thought we were crazy. 

As the man behind the wheel, the driving wasn’t 

that bad; the stops meant you saw a different part of 

the country every day. The scenery was amazing, 

thanks to sitting higher and going slower than a 

car, and it allowed plenty of opportunities to take 

in the views. The people we met along the way 

were topnotch Kiwis, and overall, the farmers 

were impressed. 

The RX performed flawlessly and so I guess that 

deems the whole venture a success. I was certainly 

impressed at the variety of feed we used and how 

well the machine handled it. It truly is the ultimate 

all-rounder.

1800 000 844 

sales@unitedheavyindustries.com.au 

We have all parts in stock and provide *3 Years Warranty Nationwide 

Specialists on mini excavators, mini loaders and wheel loaders. High Quality at affordable prices 

UHI UME15 

2021, New Model Arrives, UHI 

2021 UME15, 1.5T Mini 

Excavator, Kubota Engine!. S12. 

TA1095007. 

$18,990 

UHI US40K 

2021, New Model Arrives, UHI 

2021 US40K, 750KG Loading 

Capacity Skid Loader, Top 

Brand Quality, Free 4in1 Bucket. 

S13. TA1095008. 

$39,900 

UHI LG938 

2021, 2021 UHI LG938 Wheel 

Loader, 2.2T loading capacity, 

100HP Diesel, 4WD. Free 4in1 

Bucket, Hydraulic Quick Hitch 

and Fork Attachment. S3. TA1089863. 

$30,900 

UHI LG940 

UHI 2021 LG940 Wheel Loader, 

2.5T Loading Capacity, 114HP, 

4WD. S4. TA1089866. 

$35,990 

UHI UWL916 

2021 UHI LG916 1.6T Loading 

Capacity, 56HP, 4WD, Joystick 

Control. S5. TA1089880. 

$25,900 

UHI LG930 

2021, 2021 UHI LG930 1.8T 

loading capacity, 87HP, 4WD. 

S6. TA1090042. 

$28,000 

UHI XU20 

Proudly Announced UHI XU20 

2.0T Mini Excavator, Kubota 

Engine, Top brand quality, EOFY 

SALE!! 

S10. TA1090064. 

$29,900 

UHI UME10S 

2021 UHI NEW UME10S 1.0T 

Mini Excavator With Swing 

Boom And Expandable Track, 

free 9 Attachment. Hot Sale 

$12500. S7. TA1090052. 

$12,900 

ABN: 57625611627 | United Heavy Industries Pty Ltd Trading As UHI MACHINERY 

FFM-FP-5211819-A 

 

MELBOURNE 

2/94 Boundary 

Road, Sunsine 

West, VIC 3020 

SYDNEY 

1/323 Newbridge 

Road, Chipping 

Norton, NSW 2170 

BRISBANE 

122 Ashover Road, 

Archerfield, QLD, 

4108 

ADELAIDE 

27 Staite Street, 

Wingfield, SA 5013 

PERTH 

302 Gnangara 

Road, Landsdale 

WA 6065

Review 

The importance of a heavy-duty, good quality mulcher should 

never be underestimated. This was evident when we went to 

see the Vigolo Eagle-DT in action, transforming land littered with 

sizeable amounts of mature gorse, tobacco weed trees, and other 

‘rubbish’ and making it useable for planting maize 

Words Jaiden Drought 

Images Justin Bennett 

Full speed 

ahead 

T 

he company Vigolo was founded in 1963 

by Luigi Vigolo right at the time agricultural 

machinery was taking off n Italy. Vigolo 

and his wife are still involved in the company today, 

which offers an extensive line-up of cultivation and 

mulching equipment, supplied worldwide. 

While the machine is Italian-designed and built, 

Agriline is the sole New Zealand importer of the 

brand, while Armour Group imports Vigolo 

machinery into Australia. 

The Vigolo Eagle-DT 2.5m heavy-duty machine 

has several key features that make it durable 

enough to tackle 15+-year-old tobacco weed trees 

and large gorse plants, yet is also flexible enough 

to then go and mulch a paddock of kikuyu grass. 

Machine owner Dave Polglaze has been in 

Kaikohe on New Zealand’s North Island for more 

than 25 years. Polglaze and his family have had 

great success with leasing blocks of land off of 

people who have let them go and mulching them, 

growing maize and turning it back into productive 

land. As a result, Polglaze has used many different 

mulchers over the years, so he knows a thing or two 

about durability and performance. 

Kikuyu runs rampant in the area because of the 

almost tropical climate, though that climate was 

nowhere to be seen on the day we visited, with a 

polar blast settling in. For kikuyu to be palatable and 

efficient at either producing milk or putting weight 

on cattle, it needs to be well managed. 

The best way to do this is to keep it in its lush, leafy 

growing state with something like a mulcher. This 

has been well proven with various trials at a Northland 

dairy demonstration farm, with a multi-year 


Key points 

Brand Vigolo 

Distributor Armour Group 

Machine 

Tasks 

Eagle-DT mulcher 

Clearing ground cover, 

pushing over trees, moving 

timber, making woodchips, 

cutting grass and bush 

study showing that mulched kikuyu and imported 

supplements such as palm kernel could produce as 

much milk per cow and per hectare as ryegrass and 

palm kernel. 

This shows that the kikuyu is not the noxious 

overgrowing weed that most people associate with 

the front lawn on the beach. Instead, you need to 

harness this fast-growing grass, get out the mulcher 

and get stuck into some of that marginal land to 

make it become more productive. 

ROTOR AND DRIVE 

The large 273mm-diameter rotor is the heart of 

this machine, creating a huge amount of inertia 

combined with the four belt per side double drive. 

This rugged durability allows it to mulch grass in the 

morning and then get into the more hardworking 

stuff n the afternoon. 

The 135 horsepower (101kW) tractor we had on 

the front was obviously a great size partner for the 

machine. The large rotor is a bit like the old drum 

mower – once it gets going, it sort of runs itself. 

Because of the speed and size of the rotor, this is 

great for going into this size timber. You obviously 

need the power of the tractor, but also because the 

drum is so large a huge amount of energy is created 

at 1,800rpm, providing outstanding results that 

were clearly visible. 

There was no magic of TV editing in the accompanying 

video or photos folks, to the point where 

Polglaze himself had never used this machine in 

timber this large and was simply blown away with 

the results (which speaks volumes in itself). 

Rotor protection plates do exactly that. As the 

triple Y flails are chewing that timber up, these 

blocks save the flails denting and chewing into the

Review 

A 

B 

C 

D 

drum. These blocks will wear out eventually, but the 

flails are naturally going to need to be replaced also. 

The rotor is the expensive part here, so if you can 

look after that in this hard going, these simple blocks 

offer great long-term protection. 

BUILD QUALITY 

Great features keep coming with the Vigolo mulcher. 

Large steel skids provide height adjustment and are 

also heavy-duty enough to not get knocked around 

when the going gets tough. They are also gusseted, 

which allows you to move timber around, push trees 

over on an angle, or generally just guard the machine 

against rough treatment. 

I thought the build quality all-round on the Vigolo 

was outstanding. It weighs in at 1,450kg empty, 

A 

Double drive is a key feature of this 

machine 

B 

Rotor blocks stop the flails from cutting 

into the drum in particularly rough 

conditions 

C 

Double front chains for safety 

D 

The large rear roller was also a great 

bulldozer 

E 

The adjustable top hood can be shut for 

more aggressive cutting 

E 


65

Review 

An aerial view of the Vigolo taking out mature 

tobacco weed trees 

The large 

273mm-diameter 

rotor is the heart 

of this machine 

The large tobacco weed trees were 

no match for the Vigolo 

Vigolo Eagle-DT 

Width 2.5m 

Weight 1,450kg 

Belts Eight 

Horsepower 100–240hp 

Flails Triple Y flails (hammers optional) 

Pluses 

Large 273mm diameter rotor 

Dual drive, four belts on each side 

Double row of front chains 

Heavy-duty construction 

Triple Y flail 

Rotor protection plates 

Wide skids standard 

Large rear roller 

1,000rpm PTO speed for greater momentum 

Adjustable rear door for maintenance/spread pattern 

Minuses 

For bigger trees a forestry bar would be in order 


which goes to show the amount of steel in the 

machine. 

The large rear roller (with scraper) is great for bulldozing. 

Combined with the heavy-duty lid (which is 

5ml steel and much heavier than a lot of its competitors), 

this allows you to push the tree over, do a 

first pass while it’s been pushed, run the mulcher 

over it, then forward again to create workable size 

woodchip. This can then be easily cultivated and 

breaks down quickly in the ground for farmers like 

Polglaze, who want to use this fertile ground as an 

area to grow crops. 

For this rugged work, either the optional hydraulic 

rear door or forestry bar would have been a 

welcome addition to further protect the machine 

and manage the size of the chip. 

OTHER FEATURES 

Additional features include heavy-duty stands for 

when the machine is not on the tractor. Combined 

with a large hook to keep the power take-off haft ff 

the ground and out of harm’s way, this also made it 

easy to grease the shaft. 

Speaking of greasing, there are external grease 

nipples for the bottom bearings, on the rotor 

tucked away up front. This is a great feature because 

if you had to take those guards off ll the time, the 

grease nipples would either not get done at the 

recommended intervals or possibly at all. 

SUMMARY 

Standout features for me are the overall build quality 

and impressive results in what would be considered 

tough going for a multipurpose mulcher, not a 

forestry spec machine. Big timber or simple grass 

mulching is all in a day’s work for the Vigolo Eagle-DT. 

Polglaze has been around mulchers for more than 20 

years, so knows a thing or two about what’s required 

in the tough volcanic Northland soil, Vigolo got rave 

reviews from him.

TradeFarmMachinery.com.au 67 

03 8547 8755 bill@pickman.com.au www.pickman.com.au 

5-7 Luisa Avenue, Dandenong South, VIC 3175 

MAMMUT 413HT AGRI LOADER 

3000kg capacity, Parallel lift, 9000kg operating weight 97kW 

(130hp) Cummins 6BT5.9-C 130 Diesel Engine Certified ROPS 

Cabin with air ride seat, A/C, radio & camera. 3 speed electronic 

power shift transmission, 40km/h MAX Donaldson air filer, 

continental Hydraulic hoses throughout vehicle. Hydraulic quick 

hitch, pilot control 3.6m Load over height, 3.05m dumping 

height. S3. TA985852. 

$59,900 Inc GST 

MAMMUT TL3000 3 TONNE TELESCOPIC WHEEL LOADER 

3000kg lifting capacity, 7300kg operating weight. Cummins 

125HP diesel engine, 4 speed electronic power shift 

transmission, 40km/h MAX. Standard Bobcat skid steer quick 

hitch, pilot control, ROPS cabin with air ride seat, A/C, radio and 

camera, synchronised extraction and lifting system. 

S5. TA985855. 

$58,500 Inc GST 

SUMMIT 828 2.8 TONNE WHEEL LOADER 

2019, 2800kg lifting capacity, 6800kg operating weight, 125HP 

FEV diesel motor, 2 speed powershift, hydraulic quick hitch, 4 in 

1 Bucket, Pallet fork, A/C ROPS cabin with radio & camera. 

Comes with 4 in 1 bucket, pallet forks & spare wheel. 

S9. TA985903. 

$31,900 Inc GST 

SUMMIT 820 2 TONNE WHEEL LOADER 

2019, 2000kg lifting capacity, 5300kg operating weight, 3.4m 

dumping height, 4m lifting height, 102HP FEV Diesel motor, 2 

speed powershift, hydraulic quick hitch, A/C ROPS cabin with 

radio & camera. Comes with 4 in 1 bucket, pallet forks & spare 

wheel. S12. TA985927. 

$24,900 Inc GST 

SUMMIT R420 2 TONNE 4WD ROUGH TERRAIN FORKLIFT 

2000kg capacity, Constant 4WD, 3.5-meter lift height, 2 stage 

mast with side shift, 50hp Chinese Perkins 498BT diesel motor, 

2-speed Electronic powershift transmission, 2.5m overall height. 

S8. TA985871. 

$23,900 Inc GST 

SUMMIT H30 3 TONNE 4WD ROUGH TERRAIN FORKLIFT 

With 2 stage 3 meter mast, 3000kg capacity, 4WD, 3 meter lift 

height, 2 stage mast with side shift (3 stage 4.5m / 2 stage 4m 

mast available). 50hp Chinese Perkins Xinchai 498BT diesel 

motor, 2 speed power shift transmission. A/C ROPS cabin with 

heater, radio & reverse camera. S7. TA985867. 

$27,900 Inc GST 

MAMMUT EXPLORER 4WD ROUGH TERRAIN FORKLIFT 

2020, 3500kg capacity, on-demand 4WD, front locking dif, 4.5m 

lifting height, Japanese Kubota V2403 50HP diesel engine. 3 

stage container mast with sideshift, 2280mm overall height. 

S6. TA985863. 

$46,500 Inc GST 

FORKLIFT SLIPPERS 

1.8m, 3 tonne, Class 3. 

S10. TA985906. 

$440 / PAIR 

HYDRAULIC FORKLIFT BUCKET 

0.7m3, GP. 

S11. TA985907. 

$3,300 Inc GST 

FFM-FP-5211238-A 

2 Year Warranty - Australia Wide Delivery

68 TradeFarmMachinery.com.au 

VELDONAS 

Specialising in industrial motors and pumps 

WE BUILD DIESEL HYDRAULIC PUMP SETS TO ORDER 

ASK ABOUT OUR OIL AND TEMPERATURE AND TIMER WATCHDOGS 

ROVATTI CHOPPER 

Open pump impeller, chopper device, stainless steel plates, heavy duty jockey jacks, 

hand primer on effluent pumps, pto shaft, heavy duty frame. 

STVEL54441. TA10770. 

$6,599 

TRUCK MOUNTED 12" TRANSFER PUMP SET TRANSFER PUMP 

Truck mounted 12" Transfer pump set. 

Ask about other specialised applications. 

S13. TA11062. 

POA 

AIR CLEANERS 

HEAVY DUTY 

From 10hp to to 

200 hp. 

VEL 14307. TA10926. 

Prices starting from 

$130 

TACHOMETERS FOR DIESEL ENGINES 

Tiny tach for diesel engines gives a digital RPM reading 

regardless of the number of cylinders. A transducer takes a 

pulse reading from the injector line Simply bolt the 

transducer to the injector line, supply a 12-24V DC supply 

and away you go! It even has a built-in hour meter, service 

function and max rpm range. S22. DPLIn27532. 

$264 

INDUSTRIAL 

RADIATORS 

20 hp $275 

40 hp $360 

60 hp $585 

120 hp $820 

S11. DPLIn27501. 

From $275 

JAPANESE DIESELS 

Parts available for small 

Japanese diesels. 

AW54939-FM077-060-07. 

DPLIn27496. 

POA 

BLADES 

To fit small Japanese 

tractors. 

From $8.80 each inc GST. 

AW54939-FM077-060-08. 

DPLIn27497. 

$9 

PERKINS GENERATORS 

6,8,10,13,15,20 and 30 KVA 

generators, single and 3-phase, 

powered by water-cooled 

Perkins heavy duty diesel 

engines, key or remote start, 

fuel tank base, full engine 

protection, 500 hours service 

intervals Ideal backup or prime 

power Call for your special 

price!!!. AW54939-ST190912. 

DPLIn27583. 

POA 

ENGINE WATCHDOG TM6 

ENGINE SHUTDOWN SYSTEM 

& TIMER 

TM6 Oil/Temp Watchdog with 

wiring diagram $240 + GST 

TMT Oil/Temp Watchdog with 

shutdown timer & wiring 

diagram $460 + GST 

Solenoids and rack pullers are 

extra. S37. TA750757. 

$240 + GST / $460 + GST 

PLUTTO PUMP PRIMER 

Turn your centrifugal 

pump into a self-priming 

pump With the new easy 

to install Plutto exhaust 

primer throw away your 

bucket and hand priming 

pump The Plutto exhaust 

primer automatically 

primes up your pump 

when you sart the engine 

Priming kit. S18. DPLIn27578. 

$490 

SECOND HAND 

YANMAR DIESEL 6 X SELF 

PRIMING PUMP 

With 25 hp Yanmar diesel. 

S12. DPLIn27519. 

$6,310 + GST 

IRRIGATION HOSE HOSE 

Suction and delivery hose 

Call for your special price!. 

AW54939-FM077-043-01. 

DPLIn27516. 

POA 

ISUZU • MITSUBISHI • KUBOTA • YANMAR 

Agent for TUTTS • TATHONG • KUBOTA • ENGINES • GODWIN PUMPS 

www.veldonas.com


www.veldonas.com 

Specialising in industrial motors and pumps 

BUILT TO YOUR REQUIREMENTS 

PUMP SETS BUILT TO YOUR REQUIREMENTS NEW OR USED 

ALS0 IN STOCK 

LOW PRESSURE PUMPS 

*New 4” self-priming pump with S/H Kubota 12 hp diesel, 

100,000 lt/hr to 15mt head ................................. $4,890 inc GST 

*65 bpz bare shaft, 55 mt head ...............................................$380 

*80 bpz bare shaft, 65 mt head ...............................................$560 

BUDGET DIESEL ENGINES 

All engines are low hours, fan-flywheel, 3 months limited warranty 

*Kubota Z600, 12hp, 2 cylinder ............................................$1,710 

*Kubota D600, 15hp, 3 cylinder ...........................................$1,683 



*Kubota V1200, 28hp, 4 cylinder ..........................................$2,562 

*Kubota V1405, 30hp, 4 cylinder ..........................................$2,750 

*Isuzu 3AF1, 22hp, 3 cylinder ..............................................$2,057 

*Isuzu 3AE1, 30hp, 3 cylinder ..............................................$2,376 

*Isuzu 3AD1, 34hp, 3 cylinder ..............................................$2,557 

*Yanmar 2HS66, 11hp, 2 cylinder ........................................$1,155 

*Yanmar 2HS80, 19hp, 2 cylinder ........................................$1,765 

*Yanmar 3TNA86, 15hp, 3 cylinder ......................................$1,770 





*Mitsubishi CA700, 15hp ......................................................$2,075 

*Mitsubishi K3D, 21hp, 3 cylinder ........................................$1,980 

WE ALSO BUILD POWER PACKS INCLUDING RADIATOR, 

MUFFLER, STUB SHAFT, IGNITION, FILTERS, BASE FRAMES. 

GENSETS 

ASK ABOUT OUR NEW FG WILSON GENSETS FROM 10 KVA 

to 400KVA 

ENGINES 

*Large range of new and secondhanddiesel 

engines, 8hp to 100hp, 3 months warranty .......From $1,500 inc GST 

TRANSPORT ARRANGED AUSTRALIA WIDE 

IRRIGATION FITTINGS AND HOSES 

TO SUIT YOUR PUMPING 

REQUIREMENTS 

DIESEL POWER PACKS SELF-PRIMING PUMPS SOUTHERN CROSS PUMPS GENERATORS 

• BENDS 

• TAPERS 

• TEES 

• FOOT VALVES 

• CHECK VALVES 

Ask for a quote 

SECOND HAND 

KUBOTA Z600 

2 cylinder diesel 

power pack 

Electric start. 

PM045-072-02. 

DPLIn27529. 

$1,925 

SELF PRIMING 4 PUMP 

4 self priming, belt drive. 

AW54939-FM077-043-02. 

DPLIn27541. 

$654 

SOUTHERN 

CROSS 4X3 

With S/H Kubota 

Z620, 13 hp 2 

cylinder diesel, 20 

litre/second at 20 

metre head 

Economical 

transfer pump 

$4,970 inc GST. 

Kubota. DPLIn27528. 

$4,970 

PTO 

GENERATOR 

50KVA - Three 

Phase - 3 point 

linkage with heavy 

duty jack stands. 

VEL4156. TA10931. 

$8,710 

SECOND HAND 

ISUZU POWER 

PACKS 

3 cylinder diesel, 

22-40 hp. 

From $3,080. 

ST159827. 

DPLIn27579. 

$3,080 

ISUZU DIESEL 6 X SELF 

PRIMING PUMP 

with secondhand 25 hp. 

AW54939-FM077-051-09. 

DPLIn27515. 

$6,310 + GST 

SECOND HAND 

SOUTHERN CROSS 

80X50-315 

Isuzu 3AE1, 30 hp diesel, 

15 litres per second at 80 

metre head. 

AW54939-FM077-112-02. 

DPLIn27518. 

$7,850 + GST 

MITSUBISHI 

DIESEL 

GENERATOR SET 

8 KVA 

15 hp, S/H 3 

cylinder 

Mitsubishi electric 

start Engine 

watchdog, fuel 

tank. S16. 

DPLIn27548. 

$5,850 + GST 

SECOND HAND 

NISSAN QD32 

Diesel, 64 hp, 4 

cylinder, all new 

fittings, includes 

outrigger bearing 

A real workhorse. 

S21. DPLIn27523. 

$5,780 + GST 

UP TO 36" 

MINING PUMPS 

PUMP 

VXTE48791. 

TA206423. 

$14,510 

SECOND HAND 

SOUTHERN 

CROSS 

80X50X250 

Nissan TD27, 

48hp diesel, 20 

litres per second 

at 80 metre head 

Engine shutdown 

included. S23. 

DPLIn27505. 

$8,270 

12" 300 IS 

TRAILER 

MOUNTED PUMP 

SET 

new pump direct 

drive coupled to 

second hand 6cyl 

Nissan diesel with 

new tandem trailer 

with Vin. S33. 

TA750753. 

$18,810 + GST 

KUBOTA V1200 

With 28 hp, 4 

cylinder diesel 

power pack New 

radiator, muffler, 

hoses, filters, 

35mm keyed 

shaft. 

PM045-072-03. 

DPLIn27547. 

$3,985 

SECOND HAND 

ISEKI 10" PUMP 

New. 3 cylinder, 

40 hp Isuzu diesel. 

27480. DPLIn27480. 

$7,990 + GST 

VARIOUS 

ELECTRIC 

PUMPS SINGLE + 

3 PHASE 

elecpu9582. 

TA206433. 

$4,260 4260 

CUMMINS 66 

KVA 

6 cylinder diesel 

generator. S19. 

DPLIn27568. 

$13,387 

SECOND HAND 

KUBOTA 

SOUTHERN 

CROSS HELICAL 

PUMP 

Kubota - Southern 

Cross Helical 

Rotor pump. 

From $4,950. 

Vel SSS420. 

TA226460. 

$5,850 + GST 

PONTOON PUMP 

ELECTRIC 

Pontoon with 

electric pump. 

xzdef19652. 

TA206427. 

$14,910 

SOUTHERN 

CROSS 

100X65-315 

PUMP SET 

with Nissan QD32 

(65hp), skid fuel 

tank, oil-temp, 

hi/lo timer 

watchdog and 

fork lift roof. 

Vel67912. TA11060. 

$13,750 

PISTON PUMP 

XF404 

With DEK 4.7 hp 

diesel, 4,000 litres 

per hour 60 metre 

head. S24. 

DPLIn27531. 

$3,300 

9 Wright Street, Sunshine Victoria 3020 | sales@veldonas.com.au 

Phone 03 9312 0888 • Fax 03 9312 0999 • Mob 0417 709 200 

FFM-DPS-5011411-E


SECONDHAND 

MACHINES IN STOCK 

08 8821 1188 

FARM MACHINERY FOR ALL SEASONS 

CONTACT 

Alex East 0439 881 355 

Phillip Rowntree 0428 859 027 

Gary Kotz 0427 868 191 

Colin Adams 0429 941 331 

CASE IH 7240 2016 W/- CASE 

2162 35' FRONT AND TRAILER 

2016, FPT 468hp, 4 Speed, CVT Rotor 

Drive 

Engine Hours - 1250 

Separator Hours - 910 

11,000 Grain Tank 

Upper Cross Auger. 102721/102722. 

TA1094491. 

$412,500 

MASSEY FERGUSON HESSTON 

9635 

2008, 2504 Engine Hours 

6.6L Agco SISU 190Hp Engine 

2 Range Hydrostatic Transmission 

9190 Razor Bar Front 

16m cutting width 

Single Herringbone steel on steel 

conditioner 

With Front Trailer with brakes. 102650. 

TA1054173. 

$110,000 

JOHN DEERE S680 W/- 

HYDRAFLEX 40' 640FD FRONT 

AND TRAILER 

523hp 

Engine Hours -2105 

Separator Hours- 1716 

14,100l Grain Tank, 8.8m Auger 

Premium Cab, Led Lighting, 

2630 Monitor 

Power Cast Spreader. 102693/102694. 

TA1094496. 

$401,500 

CLAAS LEXION 760 

2017, Engine Hours- 1315 

Separator Hours - 940 

Perkins Engine T3, Dynamic 

Cooling 

11,500L Grain Tank, 4 XL Auger, 

Quantimeter 

Macdon FD 75 W/Trailer. 

102706/102707. TA1076530. 

$420,200 

AMAZONE ZAM3000 ULTRA 

PROFIS 

2013, in 2- 600l, Ext(4200L) 

Manual Hopper Cover 

1000 RPM PTO 

Amatron & Controller 

Fertilizer weight Cels 

36M Spread 

Hopper Screens. 102720. TA1089888. 

$24,200 

MILLER NITRO 4315 SP 

SPRAYER 

2009, 315HP Mercedes Benz Engine 

4128 Engine Hours 

30m Mono Boom with Triple Nozzles 

on 250mm spacings. 

6100 Tank. 

Steer ready, 3 Sensor Raven Auto High 

Grani Pot, Banjo Direct Fresh water fill 

pump. 102713. TA1082357. 

$115,500 

CASE IH 9230 W/- CASE 

2162 DRAPER FRONT 

2014, Seed Terminator 

2020 Model 

Engine Hours -2050 

Separator Hours- 1750 

AFX Rotor, 571hp 

Grain Tank 12,300l. 

102686\102687. TA1076532. 

$448,800 

JOHN DEERE S680 

2016, Engine Hours- 1550 

Separator Hours -1200 

Premium Cab - Led Lighting 

26 ft Auger, 14,100L Grain Tank 

JD Front 40' Flex Draper with 

Kelly Comb Trailer 

Includes AWS Air Bar. 

102696/102697. TA1086655. 

$462,000 

CLAAS 770 

2016, 1500 Separator Hours 

585hp, T4 Dynmaic, Cooling 

Cemos Auto- Sep - Clean 

Cruise Pilot 

Special Cut Spreader 

3XL Auger- 13,500l Grain Tank 

Auto Contour Feeder Housing 

High End Led Lights 

SEED TERMINATOR. 102702. 

TA1089847. 

$462,000 

USED HEADERS: 

Gleaner R62 (Stk 102630) ............................................. $27,500 

New HOlland CR9090 (Stk 102542) ............................ $302,500 

Case IH 8120with Macdon FD75 40’ Front 

(Stk 102723/102724) ................................................. $229,350 

PRICES ARE INC GST CONDITIONS APPLY 

USED BOOMSPRAYS: 

Miller Nitro 4315 2009 (Stk 102719) ........................... $115,500 

SEEDING: 

Bourgault 6350 Streamliner 2019 (Stk 102679) ............ $88,000 

Bourgault 8810 Cultivator 2011 (Stk 102678) ............... $44,000 

MAKE US AN 

OFFER WE 

CANT REFUSE! 

Website: www.gjeast.com.au | Email: sales@gjeast.com.au | 4-8 Goldsworthy Street - Kadina 

FFM-HH-5012311-C 

03 5560 5713 

32 McMeekin Road, Warrnambool VIC 3280, Australia 

www.wmifeeders.com.au 

Machines for all size farms start from $12,000 to $55,000 

ALBYBONE MULTI BALE FEEDER 

Options: 5 or 7 round bale & 6 or 8 square 

bale, double chassis, robust design 

PA-MICK HAY & SILAGE FEEDER 

carries up to 2 bales, one of each in any 

order, designed for all feeding applications 

CHAMPION ROUND BALE FEEDER 

Hay & Silage, big round bales, 4 bale capacity, larger machines can be built. 

ELITE ROUND BALE FEEDER 

Feeds out hay & silage, big round bales, 

2 bale capacity, high ground clearance 

HIGH-SIDED CHAMPION 

ROUND BALE FEEDER 

Feeds out hay, silage & pit silage, big round 

bales, will do squares also, 6 bale capacity 

AUSTRALIAN MADE -- STRONG ROBUST DESIGN -- FAST TURNAROUND TIMES 

FFM-HH-5211747-TS-401

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA 

Wrights Tractor Sales & Service & Wrecking 

Chalkhill Road, McLaren Vale S.A. 5171 

STOCKIST & DISTRIBUTOR FOR SA. 

Sales (08) 8323 8795 Wrecking (08) 8323 8745 Office (08) 8323 8705 

Fax: (08) 8323 9165, Mobile: 0419 820 318 

Email: wrightstractors@bigpond.com 

IN BUSINESS FOR MORE 

THAN 35 YEARS SELLING 

AUSTRALIA WIDE 

www.wrightstractors.com.au 

FOR FULL LISTING OF TRACTORS & MACHINERY, NEW PARTS & ACCESSORIES 

JOHN DEERE 5065M TRACTOR 2011, 4 wheel drive, diesel, serial no: 

1LV5065MPBJ3472255, engine no: 347255, approximately 4,493 hours indicated, 3 

point linkage, air conditioning, enclosed cab, radio/cd, radio UHF/VHF, ROPS, 

approximately 65 horsepower. 6754. TA1037949. 

$44,000 INCL GST 

ALSO IN STOCK 3PL 3 TYNE 

HORWOOD BAGSHAW BLADE PLOUGH trailing, with culter, hydraulic ram & stand, 

good order. 6878. TA1059436. 


FARMI CH260 MULCHER/CHIPPER 3 point linkage, serial no: 3293800, feed choke 

320mm, circa 2007, made in Finland. 6862. TA1067757. $16,750 INCL GST 

CASE CX 90 TRACTOR 4 wheel drive, air conditioned cab, just fitted Front End 

Loader, 3 point linkage, new front tyres, rear tyres 75 - 80%, new front forks, PTO, 

92 horsepower approximately. 6951. TA1087906. $43,450 INCL GST 

VERMEER V3550A TRENCHER twin cylinder Deutz, Vin No: 1VRS072P8V1000390, 

diesel, front blade & rear chain, approximately 614 hours indicated, tyres excellent, 

unit in excellent condition. 6818. TA1044539. 


FIAT CRAWLER TRACTOR 605C 4 cylinder diesel, 3 point linkage, 65 horsepower 

approximately, tracks good bushes turned, roll frame & roof, remote hydraulics, 

nudge bar, gears 6 forward & 2 reverse, approximately 2,400 hours indicated. 

6910. TA1076658. $27,000 INCL GST 

SICMA COSMAG ROTARY HOE Plus many other rotary hoes in stock. S1820. 

TA949345. 


2 OF 

MASSEY FERGUSON 135 TRACTOR 2 wheel drive, approximately 6,400 hours 

indicated, roll frame & roof, 45 horsepower approximately. 6724. TA1015626. 


SEVERAL OF, VARIOUS SIZES 

HOWARD EHD 7' SLASHER extra heavy duty, twin depth wheels, galvanised, 3 

point linkage, excellent condition, ready to go. (2 OF) $7,950 each. 6645. 

TA982110. 

$7,950 INC GST 

ANTONIO CARRARO TRX 8400 TRACTOR Antonio Carraro TRX 8400 Tractor, 4 

wheel drive, vin: 9435650453, year approx. 2001, 3 point linkage, 80 horsepower 

approximately, air conditioning working, original tyres 80% approximately (no cuts 

or splits), approximately 1,900 hours. 6941. TA1084328. $32,450 INCL GST 

PLUS ANOTHER WITH 

FRONT MOUNTED FORK 

MASSEY FERGUSON 240 TRACTOR WITH FEL 2 wheel drive, front end loader, roll 

frame, 3 point linkage, full width bucket double acting all round, approximately 

3,100 hours indicated, vin no: 1004, engine no: 261165, 8 speed manual, 45 

horsepower approximately. 6761. TA1039017. 


KUBOTA B7200 TRACTOR 4 wheel drive, 21 horsepower approximately, 1,024 

approx. hours indicated. 6892. TA1070341. 


NEW HOLLAND MC28 FRONT MOUNT MOWER 4 WHEEL DRIVE 3 cylinder diesel, 

serial no: TE20329, engine no: J843-87335, approximately 932 hours indicated, 

hydrostatic transmission, 1900mm slashing deck, PTO, pneumatic tyres, ROPS, ex 

council. 6828. TA1048646. 


NEW HOLLAND 57 ROLABAR HAY RAKE no wear on all knuckles, has done very 

little work. 28. TA1086701. 


JOHN DEERE 5300 TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel 

drive, fitted front end loader, ROPS frame, roof, tyres as new, 3 point linkage, 



SHIBAURA SE7300 TURBO TRACTOR 2 wheel drive, front end loader & forks, 

approximately 3,200 hours indicated, power steering, 73 horsepower 

approximately, as traded. 6837. TA1049634. 


HOWARD CONDOR PLM 350 WINGED FOLDING MOWER GALVANISED John - 08 

8323 8795, Richard - 0419 820318. 6949. TA1086715. $19,000 INCL GST 

KEYLESS ELECTRIC CODE 

BOBCAT 328G EXCAVATOR (rubber tracked), 3 cylinder diesel, serial no: 

284211534, engine no: 04N0777, approximately 2,730 hours indicated, quick 

release bucket, 4 post canopy, swivel boom, levelling blade, hammer piping, 

950mm Mud Bucket, excellent condition, approximately 3.5 tonne. 6751. 

TA1034628. 


DITCH WITCH 8020 CHAIN TRENCHER 4 cylinder diesel, serial no: 5J0190, 

approximately 1,500 hours showing, fitted with back fill blade, auxillary hydraulics, 

counter weights, open cabin, pneumatic tyres, ROPS, 80 horsepower 

approximately, John Deere motor, 4 wheel steer, front cable reel holder, ready to 

work. 6727. TA1017219. 


CONNOR SHEA 18 ROW DISC SUPER SEEDER (TRAILING) with rear bag loading 

platform, exceptional condition, no rust in boxes, ready to go. 6948. TA1085303. 


MASSEY FERGUSON 4245 TRACTOR tractor, 4 wheel drive, self levelling front end 

loader, forks & bucket, air conditioned cab, approximately 3,800 hours indicated, 

tyres 80%, 85 horsepower approximately, 3 point linkage, 4 rear hydraulic remotes 

on rear, excellent condition. 6971. TA1095032. 


CASE IH JX70U TRACTOR WRIGHTS TRACTORS PHONE 08 8323 8795 4 wheel 

drive, powered by Iveco 4 cylinder diesel engine, air conditioning, enclosed cab, 

tow bar, 3 point linkage, power take off, AUX hydraulics, 4 speed high/low, approx. 

74hp, immaculate condition, approximately 6,159 hours indicated, width 1900 at 

tyres, 2040 at guards, front end loader fitted. 6337. TA847556. $34,450 INCL GST 

CONNOR SHEA 10 ROW SUPER SEEDER 3 POINT LINKAGE super & seed, 3 point 

linkage, steel wheels, serviced & ready to go 

6929. TA1078632. $11,850 INCL GST 

JOHN DEERE 5525 TRACTOR year approx. 2010, 4 wheel drive, serial no: 

LV5525R453794, engine no: PE4045T716512, approximately 5,400 hours 

indicated, ex Council, enclosed cab, 12 x 11 power/reverser transmission, 2 rear 

remotes, 4 cylinder diesel, 540 & 540E PTO, Ag tyres all round, rotating beacon, 



NEW HOLLAND T4050 TRACTOR 4 wheel drive, year approximately 2013, air con 

cab, 1 owner, tyres 75% all round, 97 horsepower approximately, excellent 

condition throughout. 6838. TA1050651. 


IMANTS ROTOK.R6.MD.R17 ROTOKNIFE Lawn aerator. 6630. TA964931. 


ALSO NEW HOLLAND T4050F, 

4 W/ASSIST, SUPER STEER, 

FRONT WEIGHTS $27,500 


NEW HOLLAND T4050F TRACTOR 4 wheel assist, Front End Loader, bucket & forks, 

3 point linkage, air conditioned cab, super steer, approximately 4,500 hours 

indicated, ex local owner, 97 horsepower approximately (yet to be detailed). 6967. 

TA1093779. 


BONNE SWEEPER/ROAD BROOM HYDRAULIC DRIVE WITH CONTROLS 3 point 

linkage, hydraulic drive, with controls, to be serviced. 6877. TA1059344. 


WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA 

FFM-FP-5011376-B 

WRIGHTS TRACTOR WRECKERS McLAREN VALE SA WRIGHTS TRACTORS McLAREN VALE SA WRIGHTS TRACTOR WRECKERS McLAREN VALE SA


WANTED CONNOR SHEA 

SEEDERS, ANY CONDITION. 

LANDACO BELT SPREADER 2-3 ton. 

S2013. TA1086282. POA 

SAME FRUTTETO 85hp Burder Forklift 

& Hyd Bucket. S1999. TA1082325. 

POA 

SUPERIOR 7’6” SLASHER 3PL. S2018. 

TA1086285. POA 

INTERNATIONAL 21 TYNE SCARIFIER 

.. S2004. TA1082331. POA 

JARRETT 8’ GRADER BLADE Heavy 

Duty, 3PL. S2020. TA1086287. POA 

COIL PACKER ROLLER 16’. S2027. 

TA1086292. POA 

AGROW PLOUGH 14 TYNE 3PL 

Subsoiling Plough. S1987. TA1077614. 

POA 

DUNCAN 24 RUN DOUBLE DISC 

SEEDER with 3 boxes. S1948. 

TA1059644. POA 

TEAGLE SPIROMIX 3PL, Cement Mixer. 

S2014. TA1086283. POA 

PAGE 9’ SLASHER LINKAGE Heavy 

Duty. S2008. TA1082332. POA 

AERATOR 10’ SPLIT SHAFT 3 Blade, 

Trailing or Linkage. S2026. TA1086290. 

POA 

THORNTON FEEDOUT CART 1 1/2 

ton. S1967. TA1070161. POA 

HARDI 400LTR BOOMSPRAY 3PL .. S1870. 

TA1025089. POA 

FORD NAPIER BLUELINE 32 DISC 

Heavy duty plough. S1980. TA1077606. 

POA 

JETSTREAM 5 IN 1 GROUPER Honda 

motor. S1984. TA1077611. POA 

CONNOR SHEA 9’ DISC SEEDER .. 

S2001. TA1082327. POA 

VICON PS402 PENDULUM SPREADER 

3PL. S2029. TA1086297. POA 

NEW HOLLAND 352 HAMMERMILL 

MIXER .. S1919. TA1046903. POA 

AITCHISON SEEDERMATIC 9’ trailing or 

linkage. S1968. TA1070162. POA 

ROVIC 2 TON BELT SPREADER .. 

S2028. TA1086294. POA 

DUNMORE ROCK PICKER .. S1959. 

TA1063072. POA 

WALLACE 5 TYNE SUBSOIL PLOUGH 

3PL Coulters. S1996. TA1082322. POA 

ARROW LAMB MARKING CRADLE 4 

Rotary. S2002. TA1082328. POA 

BERENDS 3PL GROUND BREAKER 

RIPPER SUBSOILER 4 TYNE .. S1983. 

TA1077609. POA 

AGRIMASTER 10’ MULCHER 3PL with 

Depth Wheels. S2012. TA1082335. POA 

3PL ROCK 

RAKES 6 TO 10 

FT WINDROWS, 

RAKES & LEVELS, 

6’, 8’ & 10’. 

TA307516. 

POA 

GRIZZLY WHEELED OFFSET PLOUGH 

36 DISC New discs and bearings. S1978. 

TA1077604. POA 

ROTATING WEED WIPERS 9’6” COVER 

SUIT QUAD, UTE OR TRACTOR. 

TA449307. POA 

PORTABLE SHEEP YARDS .. S1979. 

TA1077605. POA 

CHRISGROW 10’ 3PL SLASHER .. 

S1998. TA1082323. POA 

COMBINE AND SEEDERS 

Shea 5' & 7', 3PL disc seeder 

Seedling planter (Ellis) rotary 

6' & 8' roller seeders 

9' Connor Shea disc seeder trail 

C seeders 

Ellis and Sons 4 row seeders 

Inter 24 run combine 

MF 55 12 run combine 

7' Ezy-Sow seeders 3PL $2,900 

HAY EQUIPMENT 

Small square balers: NH 317, NH 275, NH 69, MF 12. 

Claas 

Mower con - in stock 

MF 3PL roller bar 

KINGPACKER ROLLERS 8’ TO 15’. 

S1753. TA958959. POA 

ACRES OF NEW & USED MACHINERY & SPARES 

NH 339 double chop forage harvester 

Hay Feed out buggy (Pearce) 

Baler, rakes, mower, handlers, elevators and spare parts. 

Rakes, finger wheeeled 3PL, 3PL roller bar, tedder & 

rotary. 

MISCELLANEOUS 

Buttsworth scoops 1 yd 

3 tyne Moorehouse ripper, 3PL. 

Harrows cover, diamond, pasture & stump jump. 

Bait layes 

2, 3 & 5 tine rippers. 

Harland irrigation pump, PTO. 

Daken 3PL forklift 

Piston pump 5" x 4" (DGM) 

3PL stick rakes 6' to 10' new & sh 

NOBILI 9’ 3PL MULCHER High Body. 

S1982. TA1077608. POA 

Forage harvesters & carts, NH Gehl & Tiki 

Rollers (Cambridge), culti packers, stones & tyre) 

7' to 28'. 

PTO hammermills, roller mills, grain gristers. From $595 

3PL, 5-9 tine trail, 8-14 tine chisel ploughs From $795 

Irrigation pipes, pumps & motors, travelling irrigators. 

Scoops, 3PL, silt blades, carryalls and rippers. 

2nd hand tractor tyres, belt pulleys, PTO From $195 

2nd hand new tines Augers, 50' x 6" & 8", pencil 14' x 4" 

new and 2nd hand. 

Harrows all types From $45 

Boom sprays, 3PL, Hardi and Silvan, 400 & 600ltr. 

Power Harrows 3PL Lely 15' 

Crump (Kurrajong 1000) 1 tonne trailing 

Manure-lime & super spreaders Super spreaders ground 

ROCK-HOPPA DIRECT SEEDER 12 

RUN ROCK HOPPER, EXTRA HEAVY 

DUTY. S1966. TA1063077. POA 

drive, ½ - 4.5 tonne. 

9' Roto wiper, new & secondhand 

Vicon spreaders 10 to 30 bag, 

Hardi 1200 ltr boomspray trail, foam & PTO. 

OFFSET/DISC PLOUGHS 

Grizzly 20 424 disc 

Gibbons Rawlings 28 plate 

SCARIFIERS & TILLERS 

Ferguson scarifiers 3PL 

19 tyne Bagshaw scarifier towable 

SHEEP AND CATTLE 

Feeders (hay & grain) 

Cattle Scales 

Feedout bins and trailers. 

COLBURN SUBSOIL PLOUGH 7 Tyne, 

3PL with Coulters. S2015. TA1086284. 

POA 

Shearing plants, grinders, lamb cradles, handlers, 

wool pressers, bail heads, crushes, wool tables, hyd 

woolpress. 

SLASHERS 

8’ slasher 3PL (superior) 

2.3 high body Nobili mulcher 

TRAILERS 

HYD Tipping 10' x 6' 

Freighter 4 wheel trailer 

Tipping trailer 8' x 6' From $975 

TRACTORS 

Ford 3000, 45hp, 3PL, P-Steer. FE Loader. 

Fergie TEA20 petrol 

FFM-FP-5013027-TS-400 

**DELIVERY ARRANGED AUSTRALIA WIDE** SPARE PARTS: NEW AND S.H. AVAILABLE : FOR MOST EQUIPMENT 

WANTED: Tractors and Machinery, any condition, anywhere Call Selwyn on (02) 6227 7227 

Hume Highway, Bookham (YASS) 2582 • OPEN 8 TO 5 MON-FRI


ALL MAJOR 

BRANDS 

ALLDIESELS 

WARRANTY 

Australia's trusted partner for new and used diesel engines, 

quality spare parts & rebuilds 

CUMMINS 

CATERPILLAR 

SCANIA 

NTC 300 Big Cam $12,100 C7 New $26,950 DSC/DS9 Various 

$CALL 

N TC 400 Rebuild $24,000 C9 Various 

$CALL DC9 5cyl Low Kms $19,800 

NTC 350 Ex Fire Truck $13,750 C12 Good Runners from $14,850 DS11 360 & 380hp $13,750 

NTC 400 Ex Fire Truck $15,950 C12 Low Km $17,050 DSC12 420hp Electronic Low Ks $CALL 

NTC 444 $14,500 C12 Industrial $15,950 DT12 470hp & 480 EGR 

$CALL 

NTC400 Small Cam $9,350 C12 Rebuilt 

$CALL DS14 4 Series 

$CALL 

N14 Various from $11,000 C13 Industrial 

$CALL DS16.0 580hp Low Kms $22,000 

N14 Mechanical $13,750 C15 Rebuilt 

$CALL 

N14 525HP Celect Plus Rebuilt $27,500 3116 Industrial & Auto $CALL 

IVECO 

N14 Celect Ex Fire Truck $13,750 3126 330hp $11,000 

N14 Celect Plus Low Miles $16,500 3176 with jakes $CALL 

9 Speed Transmission As new $3,850 

NH250 Ex Us Army as New $9,350 3196 Industrial $CALL 

Tector 6 Suit Eurocargo Euro 4 & 5 from 

L10 330HP rebuild 

$CALL 3208 From $9,350 

$14,850 

M11 Low miles from $11,000 3208 Rebuilt $CALL 

Tector 6 Rebuild $18,150 

M11 Mechanical Industrial $CALL 3208T Ex Government $11,000 

Cursor 8 310-360hp Euro 4 & 5 from $13,750 

ISM 11 Low km from $12,100 3208 Turbo Rebuilt $CALL 

Cursor 10 380-450hp Euro 4 & 5 from $15,400 

Curso 13 400-560hp Euro 4 & 5 from $18,150 

ISM 420hp low kms $14,850 3306PC Industrial Running $5,000 

6CT 210hp 800hrs $14,300 3306DI Various 

$CALL 

6CTA 250hp $11,000 3406B Strong motors $14,850 

MERCEDES 

6CTAA 275hp - Low Kms $11,000 3406B Powerpack 

$CALL OM364A $6,050 

6CTAA 300hp $13,750 3406B After cooled $14,850 OM407 Bus Specs $3,850 

6CTAA 300 Rebuilt 

$CALL 3406C Industrial spec $15,950 OM422 V8 250hp $9,350 

6BT 160hp various specs $8,800 3406C Truck spec $15,950 OM447 Bus $11,000 

6BT New 160hp construction $15,950 3406E Dyno from $14,500 OM447 Turbo $13,750 

6BTA 180 hp $9,350 3066 New - Last one $18,700 M904LA Bus 

$CALL 

6BTAA 210hp -Low kms $10,450 3054 Low Hours $8,250 OM902LA adblue $14,000 

ISB 5.9 Industrial $9,350 

OM906LA From $11,000 

ISB 5.9 24 Valve VP44 $8,250 

OM926LA From $13,750 

ISC Low Klms from $14,850 

OM457 Bus $17,050 

ISC Rebuilt 

$CALL 

OM460 Freightliner from $13,750 

ISL Good Tested From $15,950 

ATEGO 6 V. Low Km from $11,000 

ISL 400hp Rebuilt 

$CALL 

ISX 500hp Rebuilt 

$CALL 

VOLVO 

QSM11 Rebuilt 

PERKINS 

$CALL 

6.354 Naturally Aspirated $6,600 

4.108 Rebuilt $5,500 

4 Cyl Various $CALL 

4.236 Suit Rebuild $1,100 

3054 Low hours $8,25 

DAF 

PACCAR 4 CYL $8,250 

PACCAR 6 CYL from $8,500 

PACCAR 6.7 CYL NEW $18,150 

430hp Mechanical $13,750 

280hp Electronic $16,500 

430hp Electronic Ex 85CF $17,600 

430hp Electronic Ex 95 XF $17,600 



AUTOMATICS 

World MD 3060/3560 $4,400 

World MD 3060PR/3560 From $3,850 

PR PTO with retarder New $8,250 

World HD 4560P PTO Spec $11,000 

2000 Series $4,400 

B400 Bus Spec $6,000 

B400R Retarder Spec $7,150 

B500R Retarder Spec $11,000 

AT545 Low Kms $2,200 

MT643 Low kms $3,300 

MT653 Low kms $3,300 

MTB653 with Retarders $6,050 

MT654 As New $6,050 

HT740 Ex US Army $8,250 

HT754 low Hours $9,350 

HT754 With Retarder $11,000 

HT750 DRD low Km $9,750 

Various adaptors available 

ALLIS CHALMERS 

Allis Chalmers New T3500 $7,500 

2800 $4000 

CASE 

Case/Cummins Equivilent 

$CALL 

DETROIT 

6V53 Dyno Run As New $9,350 

4.71 Low Hrs $7,700 

4.71 Turbo Low Hrs $7,150 

6.71 Inline $7,050 

6V71 Truck and industrial 

$CALL 

8V71 Low Miles $9,350 

8V71 Turbo 

$CALL 

12V71 Twin Turbo 

$CALL 

6V92TA from $10,450 

6V92TA In-chassis Rebuild $15,950 

8V92 DDEC 2 Ex F/Truck $13,750 

8V92TA Industrial as New $18,500 

8V92TA Silver near New $13,750 

8V92TA Electronic Low Miles $13,750 

Series 60 DDEC 2 

$CALL 

Series 60 12.7 500hp $13,750 

Series 60 14.0 

$CALL 

DD15 

MAN 

$19,250 

DO824 Low Km $7,150 

DO826 Low Km $9,350 

DO836 Electronic from $9,900 

DO836 Common Rail $16,500 

D2866 $13,750 

D287 $13,750 

D2676 Common Rail $22,00 

DEUTZ 

F3L912 $6,600 

F4L912 Suit Rebuild $3,300 

F5L912 Suit Rebuild $3,300 

F6L413F 

$CALL 

ONAN 

Onan 9hp Rebuilt $2,750 

TD61F $8,500 

TD63 $9,350 

D6A Low Km $9,350 

D6B $10,450 

TD71 Low Km $9,350 

TD73 Low Km $9,350 

D7A Mechanical $9,350 

D7B Mechanical $10,450 

D7C Electric Gov. Low Km $13,750 

D7C Rebuild suit FM7 $17,600 

D7E suit FE Euro 4 & 5 $14,850 

D12A suit FH12 $14,400 

D12D 420hp Low km $18,700 

D12D 460hp $19,800 

D12D 500hp 

$CALL 

D9A Suit FM Euro 4 $19,800 

D9B Suit FM Euro 5 $19,800 

D11C Suit FM Euro 5 $19,250 

D13A Suit FH/FM $22,000 

D13C Suit FH/FM Euro 5 $23,100 

D13K Suit FH/FM Euro 6 very low miles 

$44,000 

MACK 

E6-350 Two Valve $11,0000 

E7-350 Mechanical $14,950 

E7-427 V-Mac $16,000 

E7-454 V-Mac $16,225 

E7 4 Valve V-Mac $16,225 

STEER DRIVE AXLES 

Assorted Axles 

$CALL 

NEW STOCK 

ARRIVING 

NEW, REBUILT AND USED MOTORS. HUNDREDS OF ENGINES WRECKED FOR SPARES 

SPECIALISING IN AMERICAN AND EUROPEAN DIESELS 

Cant find what you are looking for? Give us a call 

PRICES 

NEW STOCK ARRIVING DAILY. 

www.alldiesels.com | info@alldiesels.com 

INCLUDE GST 

Head office: 18 Jade drive Molendinar, Gold Coast QLD 4221 

call 07 5597 0077 or text 0419 515 551 

POWERPACKS 

We have a huge range of industrial powerpacks in stock for immediate 

dispatch, ranging from 80hp all the way up to 1,500 hp. 

CATERPILLAR 

CUMMINS 

3516 1,500hp 400 hours $275,000 

3054 85hp low hours $7,700 

3056 aftercooled 180hp $17,600 

3126 200hp $19,250 

C6.6 200hp 600 hours $19,800 

C7 300hp $27,500 

C9 335hp $20,000 

C11 400hp $25,000 

C13 440hp 800 hours $45,000 

C15 550hp $30,800 

C15 540hp 1500hours $45,000 

3306 DI 300hp $19,800 

3406C 460hp $27,500 

3406E 660hp $27,500 

JOHN DEERE 

6081HF070 250hp $19,800 

4329D Turbo $8,500 

4BTA on trailor v. low hrs $11,000 

6BTA 160hp $14,500 

6CTA 250 hp $15,400 

ISB 260hp low hrs $18,375 

QSC 300hp $24,200 

QSL rebuilt 

$CALL 

N14 Mechanical 475hp $27,500 

QSX15 rebuilt 

$CALL 

DETROIT 

Detroit 8V71 Turbo $16,500 

Detroit 12V71TT 

$CALL 

PERKINS 

1104 Turbo $7,700 

1106 180hp $14,500 

CUMMINS N14 MECHANICAL 475HP 

AIR COMPRESSORS 

Sullivan Palatek 900CFM only 3,800hrs. $49,500 

Sullair 900XHH/1150XH 1,150CFM 1,700hrs $88,000 

BLADDER TANKS 

New 3,000 Gal. Trailable, complete with 

tiedowns. Suit potable water $5,500 

New 5000 Gal Trailerable $5,500 

LISTER 

SR3 19.5 hp $3,300 

LPW4 Power Pack 40hp $4,235 

INTERNATIONAL 

DT466 from $8,250 

DT466 Ex Firetruck $9,350 

530E Electronic Low Kms $10,500 

TRANSFER CASES 

Kaiser $3,850 

Rockwell From $2,500 

FFM-FP-5013171-CS-398

4/3/20, 12:38 pm 

Page 1 of 1 

4/3/20, 12:38 pm 

Page 1 of 1 

2005 MITSUBISHI CANTER 2.0 

$15,990 

Trucks / Trucks / Tray 

RefCode: TA927681 Class: Tray Power - hp: 110 

Drive: 4x2 Kms: 384,874 Stock Number: U01034 

2005 Mitsubishi Fuso Canter 2.0 Narrow Cab Short Wheel Base. this truck little 

runs exceptionally well and does it with very little fuel consumption. Power 

Steering, Power windows, Air conditioning and Steel Table Top Tray freshly 

painted with Removable Ladder Rack. This is a fantastic little truck for the 

tradesman who needs more payload and tray area. Long Rego 11/04/2019. call 

us an arrange a test drive. 

West Gosford, NSW 

DL 10210 

! CALL 02 6171 3426 

SAVE ITEM 

EMAIL SELLER 

MATTSON D1105 RUBBER TRACK 

LOADER 

$19,000 

Loaders / Mini Loaders 

BAUER TRADER MEDIA 

SEARCH 

Trade Safely. Use our anti-scam guide to protect yourself. 

NEXT 

Page 1 of 4328 (43,278 results) 

Sort by Premium Ads 

list map 

GET ALERTS 

RefCode: TA938937 BAUER TRADER MEDIA 

Kubota diesel D722, 3 cylinder, 4 in 1 bucket, fork, grapple, level bar available. 

Finance available for $65 per week tap 

Chevallum, QLD 

SEARCH 

! CALL 07 3073 8232 

SAVE ITEM 

Trade Safely. Use our anti-scam guide to protect yourself. 

EMAIL SELLER 

NEXT 



list map 

2014 CATERPILLAR D6T LGP 

$295,000 

GET ALERTS 

2005 MITSUBISHI CANTER 2.0 

$15,990 

Dozers / Crawler and Swamp / Swamp 

RefCode: TA1008738 Class: Swamp 

D6T LGP 2014 model with 3,540 hours. Equipped with an air conditioned cab, 

Trucks straight / tilt Trucks blade, / apex Trayshoes, drawbar, diff steer and has been serviced ready 

for work. $295,000 plus GST 

RefCode: TA927681 Class: Tray Power - hp: 110 

Drive: 4x2 Kms: 384,874 Stock Number: U01034 

Templestowe 3106, VIC 

2005 Mitsubishi Fuso Canter 2.0 Narrow Cab Short Wheel Base. this truck little 

runs exceptionally well and does it with very little fuel consumption. Power 

Steering, Power windows, Air conditioning and Steel Table Top Tray freshly 

painted with Removable Ladder Rack. This is a fantastic little truck for the 

! CALL 0418 262 226 

tradesman who needs more payload and tray area. Long Rego 11/04/2019. call 

us an arrange a test drive. 

West Gosford, NSW 

DL 10210 

SAVE ITEM 

! CALL 02 6171 3426 

EMAIL SELLER 

SAVE ITEM 

EMAIL SELLER 

1997 INTERNATIONAL S-LINE 

$55,000 

MATTSON D1105 RUBBER TRACK 

LOADER 

$19,000 


(03) 5191 9369 

RAY MASSARO 0417 887 718 

LUKE MASSARO 0448 024 461 

www.massaromotors.com.au 

KUBOTA M100GX 

Tractor 

Full cab with air conditioning 

Bi-Speed turn 

Intelli-shift transmission. S509. TA1094344. 

$77,000 

JACOBSEN GREENS KING IV PLUS 

Reel Mower. 62 cutting width,diesel 17.7 hp engine, 

hydraulic lift. Please Contact us for more information. S510. TA1094349. 

$5,990 

JOHN DEERE 6130 

Brand new rims and tyres, front weight set, full service, full cab with air 

conditioning. S466. TA1062779. 

$42,990 

KUBOTA PH2301 

New 3 metre power harrow, 575mm packer roller 

S454. TA1051093. 

$26,990 

HONDA PIONEER 1000 

Roof, windscreen, light bar *Photos taken as arrived, contact us for more info. 

S498. TA1085331. 

$16,990 

UNKNOWN KOMATSU 

Fork lift, good condition. Contact us for more information. S477. TA1070014. 

$5,500 

MASSEY FERGUSON 65 

Tractor. 4cyl diesel, rice includes slasher. S490. TA1080909. 

$9,990 

ISEKI SX75 

ROPS tractor, drives well, fully repainted, new suspension seat. S123. TA729228. 

$15,990 

KUBOTA RTV-X1140 

Brand New. 4 Seater - converts to cargo bed, 24.8HP diesel engine, hydrostatic 

transmission. S505. TA1087895. 

$27,990 

KUBOTA L4240HDA 

42hp 4cyl diesel, HST transmission, 4WD, industrial tyres 

S506. TA1087917. 

$47,888 

Large range of New & Used Machinery in Stock 

Located at 2-6 BRIDLE ROAD, MORWELL VIC 3840 

JOHN DEERE F1145 

Deck mower. 3 cyl diesel, hydrostatic transmission, 4WD 

S491. TA1080914. 

$9,990 

FFM-HH-5006851-C 

Powered by 

RESEARCH • COMPARE • BUY • SELL 

AUSTRALIA’S #1 

CONSTRUCTION EQUIPMENT MARKETPLACE * 

BUY 

More than 43,000 excavators, 

loaders, dozers, backhoes, graders, 

trucks and trailers, buckets and 

EARTHMOVERS & EXCAVATORS FOR SALE IN 

AUSTRALIA 

attachments, and other parts and 

accessories currently listed for sale 

SELL 

Unlimited stock listings on 

TradeEarthmovers.com.au 

PLUS 

TradeFarmMachinery.com.au 

for just $360 per month 

www.TradeEarthmovers.com.au 

EARTHMOVERS & EXCAVATORS FOR SALE IN 

AUSTRALIA 

* Based on stock items for sale as at March 2020


02 6725 4617 

ruralwrecking.com.au 

parts@ruralwrecking.com.au 

337 Oakwood Road, Inverell NSW 2360 

ABN: 48 053 335 667 

WANTED TO BUY TRACTORS FOR WRECKING 

Parts available for the following makes and models of tractors 

CASE 

585, 595, 685, 695, 800, 830, 832, 870 

2WD, 885, 895, 900, 930, 932, 956, 970, 

1030, 1032, 1070, 1194, 1270, 1370, 

1390, 1394, 1594, 1690, 2090, 2094, 

2096, 2290, 2290, 2294, 2390, 2394, 

2470, 2590, 2594, 2670, 2870, 3394, 

3594, 4230, 4496, 4694, 4994, 7110, 

7210, CVX 170, CX60, MAGNUM 275, 

MAGNUM 275, MAGNUM 290, MAGNUM 

305, MX80C, MX255, MX285, PUMA, 

STX 375 QUADTRACK, STX425, STX440 

QUADTRACK, STX450, STX485, STX500 

CASE IH 

1896, 4690, 4890, 4894, 5120, 5130, 

5140, 5150, 7120, 7130, 7140, 7150, 

7220, 7230, 7240, 7250, 8910, 8920, 

8930, 8940, 8950, 9130, 9150, 9170, 

9180, 9250, 9260, 9280, 9350, 9370 

QUADTRACK, 9380 QUADTRACK, 9390, 

MX90, MX130, MX135, MX150, MX230, 

MX240, MX200, MX220, MXM175, MX270, 

MXM190, STX375, STX440, STX480 

CATERPILLAR 

CHALLENGER SERIES – 35, 45, 55, 65, 

65C, 75, 75C, 75E, 85C, 85D, 95E, 65E 

TRACK MACHINE, MT765D, MT765C 

FORD 

3000, 3610, 4000, 4600, 4610, 5000, 

5610, 5640, 6000, 6600, 6610, 6700, 

6810, 7000, 7600, 7700, 7710, 7840, 

8000, 8210, 8230, 8340, 8401, 8600, 

8700, 9000, 9600, 9700,, TW5, TW10, 

TW15, TW20, TW25, TW30 

INTERNATIONAL 

385, 414, 434, 444, 484, 514, 554, 564, 

574, 585, 624, 660, 674, 686, 696, 706, 

756,766, 786, 856, 866, 885, 886, 956, 

976, 986, 1056, 1066, 1086, 1256, 1466, 

1468, 1486, 1566, 1568, 1586, 3288, 3388, 

3588, 3688, 3788, 4166, 4186, 4366, 4386, 

4568, 4586, 4786, 5088, 5288, 5488, 6388, 

6588, 6788, 844S, AW6, AW7, AWD6, 

AWD7, B250, B275, W6, W7, 

JOHN DEERE 

6170R, 950, 1050, 1130, 1140, 1640, 

1750, 2010, 2020, 2030,2040, 2120, 2130, 

2140, 2250, 2450, 2650, 2850, 3010, 3020, 

3120, 3130, 3140, 3350, 3640, 3650, 4010, 

4020, 4030, 4040, 4050, 4055, 4230, 4240, 

4250, 4255, 4430, 4440, 4450, 4455, 4555, 

4560, 4620, 4630, 4640, 4650, 4755, 4760, 

4840, 4850, 4955, 4960, 5010, 5020, 5310, 

5515, 5300, 6030, 6110, 6200, 6220, 6300, 

6310, 6320, 6330, 6400, 6410, 6620, 6630 

Premium, 6810, 7210, 7330, 7510, 7520, 

7600, 7610, 7700, 7800, 7810, 7920, 7930, 

8100, 8200, 8285R, 8300, 8310, 8330, 

8345RT, 8400, 8400 TRACK, 8410, 8430, 

8360RT, 8440, 8450, 8520, 8520T, 8530, 

8630, 8640, 8650, 8760, 8770, 8850, 8960, 

8970, 9400, 9410R, 9420T, 9430T 

NEW HOLLAND 

7840, 8430, 8560, 8870, 8970, 9482, 

9682, 9860, 9880, 9882, 9482, 9484, 

G210, G240, L85, L95, T6020, T7030, 

TG230, TG235, TG255, TG285, TJ375, 

TJ425, TJ450, TM125, TM135, TM195, 

TN55D, TN95F, TS100, TS100A, TS110A, 

TS125A, T9060 

STEIGER 

KP525, KP 1350, KP1325, KP1400, 

BEARCAT 3 & 4, COUGAR 2 & 4 CM250, 

PANTHER 2, PANTHER 3 ST310 & ST325, 

PANTHER 4 CM325, TIGER ST470, 

VERSATILE 

500, 700, 800, 835, 855, 875, 895, 900, 

935, 945, 946, 950, 956, 975, 976, 1150, 

1156 

ALSO WRECKING 

VARIOUS MODELS OF 

CHAMBERLAIN, DEUTZ FAHR, FIAT, JCB, 

LAMBORGHINI, MASSEY FERGUSON, 

MCCORMICK, SAME 

– CALL US TO ENQUIRE 

Follow us on Facebook to keep 

up to date with new stock that’s 

regularly coming in. 

@ruralwrecking 

Wrecking largest range of tractors in Northern NSW 

FFM-FP-5211221-TS-396

Get 13 issues of 

FOR 

JUST $ 

79 .99! 

You’ll receive 

13 issues of 

Farms & Farm Machinery magazine 

Weekly e-newsletter 

FREE delivery to your mailbox 

How? 

Visit magshop.com.au/ffm 

or call 136 116 

Already a subscriber? 

Simply call 136 116 to extend your 

subscription with this offer and save 

Subscribe today, it’s easy!


CASE IH PUMA 165 2014, FWA/4WD Cab - Tractor 

only, Hours: 8875, Eng Power: 165 Hp Boosted Max 

210 Hp , VIN/Serial #: ZCBH52967. New Front tyres, 

Tractor has been throught the workshop and is 

ready. ZCBH52967. TA1034669. $67,000 

KUBOTA M135GX 2017, 3175 Hrs, Front axle 

suspension, Front fenders, Intelli shift 24x24 F/R 

Transmission. Row Crop tyres. Currently going 

through the workshop to be ready for immediate 

delivery. SN54040. TA1084814. $66,000 

CASE IH DCX131 2003, Mower conditioner, 4m steel 

rollers with travel buggy. Located Tasmania. Call Tas 

Mundy 0400 077953. NCA0096353. TA1077189. $25,000 

SAMASZ KDTC341 2020, Mower 3.4m Cut, Shaft 

drive, Spring flotation, Hydraulic breakaway. As new 

condition, RRP $26,000.00 Save $$$ on the best 

mower on the market today. Located in our Maffra 

branch. 0055204. TA1077050. $19,800 

KUHN GMD 310F 2018, 3 metre flail Mower 

Conditioner, "DEMO MODEL". Located Tasmania. Call 

Simon Maloney 01419 348023. A0955. TA1005568. 

$25,000 

FELLA SM310 FZ SM 310 Front and Rear 2011, 6.2m 

overall cut. Workshop repaired and serviced and has 

been fitted with full set of new blades. VIN/Serial #: 

CDA00317. Located in our Maffra Branch. CDA00317. 

TA1065699. $14,000 

AMAZONE KG 5001 - 2 2018, Power Harrows, Near 

new Amazone Power Harrow and Amazone ISOBUS 

Seeder c/w custom Stainless Steel Hopper. Hard 

faced blades and has ISOBUS Seeder Monitor. 

TBA123. TA1033464. $88,000 

LELY MULTIDISC 400 2006, Folding, 4 metre, SPEED 

DISCS with Air seeder and crumbler rollersr. Located 

Tasmania. Call Simon Maloney 0419 348023. 

06538112. TA1077058. $26,500 

SIPMA ZK650 WIR 2018, Rakes 6.5metre rake, one 

season old. Located Trafalgar. Call Ron Hampton 

0412 544077. 00036. TA1051162. $24,500 

LELY 805 MASTER 805 2010, Rakes. Been through 

workshop. Twin rotor, rear wheel steering, 7.8m 

working width. Presents well *** Finance available 

***. 3056491. TA926771. $19,900 

MASCHIO PANTERA 470 2010, Folding Rotary Hoe. 

Located Trafalgar. Call Andrew 0408 368 326. 

059720011. TA1064588. $28,000 

SIPMA ZK650 WIR 2018, Rakes 6.5metre rake, one 

season old. Located Trafalgar. Call Ron Hampton 

0412 544077. 00036. TA1051162. $24,500 

NEW HOLLAND 650 650 baler, Round Baler, netwrap. 

Located Tasmania. Call Simon Maloney 0419 

348023. 910943. TA1077051. $8,500 

VICON RV1601 Round Baler/Wrapper Combination, 

paddock ready. Located Trafalagar, Call Andrew 

Noonan 0412610903. RW0000033. TA1062292. $55,000 

WELGER RP435 2008, Round Baler, Bales: 24000, 

VIN/Serial #: 175515528, Net and Knives. 

175515528. TA961700. $27,000 

GENDORE T1400SF 2003, Bale Wagon/Feedout, 

VIN/Serial #: 2140. 2140. TA1039349. $19,800 

NEW HOLLAND 658 Round Baler NETWRAP, 27000 

bales. Located Longford. Call Simon Maloney 0419 

348023. 976001. TA1077059. $14,000 

KUHN VB2190 Round Baler, netwrap, 22000 bales. 

Located Tasmania. Call Tas Mundy 0400 077953. 

VGRL001969. TA1077060. 

POA 

LELY V160 Round Baler, Netwrap. Located 

Tasmania. Call Simon Maloney 0419 348023. 

175800272. TA1077054. $22,000 

GALLIGNANI GAV9 V9 Round Baler, net wrap, V9 

TM3. TBAV9TM3. TA1077048. $16,500 

FFM-FP-5099410-A 

TRAFALGAR 

8-14 Saleyards Road, 

Trafalgar, VIC 3824 

Tel: 03 5633 1588 

MAFFRA 

2 Empire Place, 

Maffra, VIC 3860 

Tel: 03 5141 1700 

LEONGATHA 

120 Horn Street, 

Leongatha, VIC 3953 

Tel: 0475 004 436 

LONGFORD 

6-8 Wellington Street, 

Longford, TAS 7301 

Tel: 03 6391 2411 

Email: admin@ttmi.com.au 

ttmi.com.au 

ttmi.gippsland 

ttmi.asmania


COLAC | WARRNAMBOOL | BALLARAT 

357 Princes Highway, Colac West, Vic, 3250 

Colac 03 5231 6322 Warrnambool 03 5561 1733 Ballarat 03 5331 0177 

CLAAS ARION 660 CMATIC Fully suspended air cab, C-Matic 

vario transmission. 50 kph, front suspension, front 3pl & PTO, 

GPS steer kit trimble. 1060 hours, one owner. CONSCO. 

TA1089485. $180,000 

VADERSTAD 400S RAPID 7400 Hectares, 5" spacings, 4m 

working width. Seed & fertiliser. Good condition. HW398. 

TA1072932. $99,000 

CLAAS ARION 650 C-MATIC 50km. Suspension all round. 4 

remotes, auto grease to front suspension, 4 speed PTO. 

08406-P. TA1059155. $149,000 

JOHN DEERE PLANTER 1770 Precision planter, isobus, section 

control, front coulter discs. 3.5m transport. HC2006. 

TA1050087. $63,800 

DEUTZ AGROTRON 180 Contact Scott 0429 316 322. Air cab, 

front weights, 24 x 24 power shuttle, 4 speed PTO. CONSC1. 

TA1090816. $92,500 

GILTRAP RF16 Giltrap 16 Tandem axle, 16 cubic mtr wagon. 

Side delivery. Central grease bank. Serviced, ready to go. 

HC1962. TA1084907. $31,000 

MCHALE FUSION VARIO Fusion Vario baler/wrapper combo. 

26,000 Bales. Innoculent tank fitted. Consignment sale for 

customer. CONS3. TA1093508. $129,000 

CLAAS 385 RC 6 x 4 heavy duty net baler. Rotor cut with 

hydraulic lift pick up. One owner 14742 bales. Fully workshop 

checked & ready to go. HC1826. TA1091016. $36,000 

VADERSTAD RDA600C Rapid 600C seed / fert 6000 Lt split 

hopper, near new discs & boots. Loading auger, Ipad control. 

Fully workshop checked. Paddock ready. HW492. TA1080051. 

$165,000 

CLAAS ARION 530 T4 2017, fully suspended air cab, 24 x 24 

hexactiv 40 kph, 4 speed PTO Stoll loader, bucket & fork. 3rd 

function, fully serviced, ready to go. HC2115. TA1090824. 

$82,000 

CLAAS VARIANT 360 5 X 4 rotor feed net baler, wide pick up. 

22193 bales. Workshop checked. Ready to go. HC1847. 

TA1091550. $22,000 

DEUTZ M600 Contact Scott 0429 316 322. Air cab, 24 x 24 

power shuttle. 40 kph. Loader, bucket & forks. Front guards. 

CONSC2. TA1090821. $77,000 

CLAAS UNIWRAP 455 Phone Greg 0438 786 035 Excellent 

condition. One owner. 7218 rolls completed. 2015. CONSCOTT. 

TA1087872. $99,000 

MCHALE V660 baler 25,000 rolls. Has just had full workshop 

service. All chains replaced. CONANS. TA1090811. $39,500 

SEED HAWK SH600C 6M Seed Hawk, 4800 hectares, hydraulic 

metering, seed & fertiliser, 10" spacing. Good condition. 

HC1974. TA1089116. $101,500 

SCOTT O’HANLON 0429 316 322 

GREG HARRINGTON 0438 786 035 

JAMIE DUNN 0427 469 400 

TREVOR BANT 0459 469 456 

www.claasharvestcentrecolac.com.au 

FFM-HH-5166595-B 

Tim Harper 0429 578 881 

Rocky River Ag Services 

CRYSTAL BROOK SA 

Ph 08 8636 2772 

Sales, Service & Parts 

ABN: 961 614 184 01 

lsmart@rockyriverag.com.au 

www.rockyriverag.com.au 

HARDI COMMANDER 7036 

7000Lt, 36m boom, c/w 363 pump, Trimble 750 monitor, Field IQ, 

2006 model, good condition. 51127. TA1069781. 

$66,000 

CASE IH 7140 

Axial flow combine, c/w straw chopper, Rocktrap, 

very good condition. 51081. TA1055133. 

$324,500 

FLEXI COIL 5500 

Air drill, 60ft, 12" spacing, c/w double sowing kit, 350lb b/out, 

presswheels. 51097. TA1055134. 

$82,500 

CASE IH 7140 

Axial flow combine, c/w 3152 40ft front, straw chopper & upper 

cross auger, CROP READY. 51026. TA971303. 

$374,000 

CASE IH 2300 

TBH, 8000Lt, 2 bin Air art, c/w single sowing kit, good condition. 

51128. TA1090632. 

$19,800 

CASE IH MAGNUM 290 

c/w front & rear duals, powershift trans, 2011 model, good 

condition. 51138. TA1082064. 

$148,500 

Brad Page 0428 833 193 • David Cliff 0427 859 960 • Lynton Smart 0427 859 967 • Tim Harper 0429 578 881 

FFM-HH-5012302-A

Lyndoch Motors 

Phone: (08) 8524 4140 

Jeffrey Both: 0428 844 271 

AH: (08) 8563 2387 SA 

Graham Ahrens: 0429 846 011 

AH: (08) 8524 4309 SA 

Duncan McInereney 

AH: 0427 245 140 

Visit our site: www.lyndochmotors.com.au 

email: sales@lyndochmotors.com.au 

POOLE & 

JACKSON 

SPEED & WALPEUP 

ABN 28 100 780 069 

Ph: 03 9998 4998 

PTY LTD 


COBRAM FARM EQUIPMENT PTY LTD 

Ph (03) 5872 1722 (03) 5872 1265 

A/H (03) 5865 8262 

Lot 3, Murray Valley Highway 

PO Box 26, Cobram, Vic 3644 

ACN 086 668 108 

MASSEY FERGUSON 

CASE IH 4430 2012, Patriot sprayer with Aim Command, 6000 litre tank, 

36.5 metre 7 section boom, auto steer with a Nav controller & 372 

receiver, 13.6R42 tyres, boom prime & flush, hyd. banjo fill pump, has 

been workshop checked & serviced. S253. TA1082080. $242,000 

GRAINLINE AUGER A range of new 8 and 10 Grain Line Augers Available. 

S53. TA1086653. POA 

DUNCAN 19 RUN RENOVATOR TWIN BOX.. 

dual box machine has been overhauled in the 

workshop new coulters point and feet. S43. TA1094090. 

$1 

CASE IH 340 2012, Magnum 340 Ultimate powershift tractor, 520/85R46 

dual rear, 480/70R34 dual front, 3 point linkage, 50 km/hr trans, 3900 

hours. S254. TA1082081. $198,000 

HARDI COMMANDER 5030 2003 Commander V 5000 Litre tank 30mtr boom 

463 spray pump pilot controller triplet nozzles chemical hopper. 

OBC. S47. TA1016214. $22,000 

CASE IH 8230 2012, r/trap, chopper, 40' 2152 draper c/w hyd. top link, 

float optimiser, levelling wheels & cross auger, pre season serviced 1608 

s/hrs. S255. TA1082082. $352,000 

COMBINES 

Case IH 8240, 2017 build, 1192 sep hrs, rock trap, chopper, singles, 

2018 MacDon FD140 flex draper, x auger, coming in .............................. $506,000 

Case IH 7230, 2015 build, 1430 sep hrs, chopper, singles, 

MacDon FD75 40’ flex draper, x auger, coming in ...................................$396,000 

Case IH 8230, 2014 build, 1812 sep hrs, rock trap, chopper, 

singles, 2013 40’ 2162 flex draper, x auger, coming in ...........................$385,000 

Gleaner R75, 1500 s/hrs with 1 season old 35’ Agco 9250 

Dyna Flex draper front, very tidy machine ..............................................$165,000 

HAY 

Case IH LBX 432, 2008 build, 4’x3’, single axle, approx. 14,000 bales, 

auto-lube, one owner ...............................................................................$71,500 

Krone EasyCut 3210CRI Mower Conditioner, 2011 build, centre pull, 

3.2m cut, poly chevron rollers, 1000 PTO, avail. Sept. ..............................$22,000 

Krone 2015 1290 HPD XC 4 x 3 baler, tandem wheels, chopper, 

auto lube, scales, Gazeeka moisture meter, 36,500 bales coming in ......$121,000 

Kuhn VB2190, 2014 build, approx. 28,500 bales, 6’ variable chamber, 

rotor feed, net, available Aug/Sept 21 ......................................................$23,100 

SPRAYERS & SPREADERS 

Amazone ZA-M 3000 Ultra, 2012 build, twin disc linkage fert 

sprea, 540 PTO, controller ........................................................................ $14,300 

Hardi 8536 Commander 2, 2012 build, delivered 2015 with updates to 2015 spec 

by Hardi, 8500 litre tank, 8500 controller with auto section, 36 m Terra Force boom 

with Norac auto height, hyd. Filling pump, hyd. Product pump, tank gauge, hyd 

brakes .....................................................................................................$97,900 

Hardi 5036 Commander 2, 2012 build, 5500 controller with Jobcom, 5000 litre 

tank, 36 m Force boom with 6 sections, tank gauge, PTO pump $ ...............55,000 

TILLAGE & SEEDING 

Morris 7240 Air Cart, 8000L, 2 bin, Tow between, ground drive, 

monitor, auger OBC .................................................................................. $44,000 

Horwood Bagshaw, 2008 build 35’ Narrow Centre Scaribar, 10.5” 

spacing, Knuckey sownpress wheels, 6000 l trike with auger, Topcon 

controller coming in ...............................................................................$115,500 

Horwood Bagshaw 2006 27’ Scaribar, Agmaster flex boots, RFM coil press 

harrows, 1996 build 3000 litre trike air seeder hopper, zero max boxes OBHC ....... 

.................................................................................................................$77,000 

Horwood Bagshaw 4000 trailed air seeder hopper, 2005 build, 2 bin, 

blending metering system, Topcon Eagle controller with electric variable 

rate drive ..................................................................................................$27,500 

Kuhn EL92-230 Rotary Hoe, 2014 build, 2.3 m work width, 

crumble roller, side separating disc, 540 PTO ...........................................$12,100 

TRACTORS 

John Deere 7800, 1998 build, 520/85R38 rear & 

420/85R28 front, 9900 hrs .......................................................................$33,000 

FFM-TV-5012485-A 

HORWOOD BAGSHAW SCARIBAR 350 Suit Rear Tow Seeder AGMASTER 

Press Wheels. 42' Wide. 15 Inch, Extra Original Tines Available. Originally 

36' with 7.5" Tine Spacing. S45. TA937451. $29,000 

GASON 1830RT 2 BIN GASON 1830 Rear Tow 2 Bin 4 Outlet Dual Front 

Castor Wheels. S27. TA598908. 

$33,000 Incl.Gst 

HARVESTING 

Gleaner R60 30 Front $20,000 

TRUCKS 

Mercedes Benz 2222 

prime mover with 30 Ft flat top trailer 

converted to tipper $20,000 

Mercedes Benz 1418 

single drive with page and page 

pusher axle $10,000 

A RANGE OF NEW 8" AND 10" 

GRAIN LINE AUGERS AVAILABLE 

FFM-TV-M-5114257-A 

NEW HOLLAND H8080 

Windrower with 15.5ft disc mower conditioner, 

Mow Max front, also 25ft draper end knives and 

trailer. S31. TA759375. 

POA 

TRACTORS 

CASE MXM 190 190HP FWA A/C CAB FRONT END LOADER ..................................................................... POA 

MASSEY FERGUSON 5465 110 H.P. FWA A/C CAB one owner tractor ...................................................... POA 

MASSEY FERGUSON 6445 90 HP A/C Cab One owner tractor in excellent condition .............................. POA 

CASE MXM 175 177 HP FWA POWERSHIFT one owner ........................................................................... POA 

CASE MX 120 A/C CAB 120 HP FWA ........................................................................................................ POA 

MASSEY FERGUSON 6265 105hp FWA A/C Cab Burder Loader .............................................................. POA 

MF390 85HP Loader 4WD Shuttle Shift .................................................................................................. POA 

DEUTZ AGROTRON 90 MK3 90HP FWA A/C cab and F.E.Loader ............................................................... POA 

MF590 80HP, A/C cab, engine rebuilt ...................................................................................................... POA 

ISEKI SX 75 A/C cab, FWA, linkage one owner ........................................................................................ POA 

MF 394-4 Orchard Tractor, 80HP, Konig A/C cab ..................................................................................... POA 

INTER 484 ROPS frame, 2WD, remotes .................................................................................................. POA 

DAVID BROWN 880 with F/E loader ........................................................................................................ POA 

MASSEY FERGUSON 6150 95 HP A/C Cab Front end loader ................................. Going through workshop 

MASSEY FERGUSON 3070 95 HP A/C Cab Front end loader ................................... Going through workshop 

WINDROWERS 

NEW HOLLAND SP H8080 15FT ROTARY MOWER CONDITIONER FRONT AND 25FT 

DRAPER FRONT ON A TRAILER .............................................................................................................. POA 

MOWER CONDITIONER 

MASSEY FERGUSON 1345 12 FT STEEL ROLLERS CENTRE SWING ......................................................... POA 

TAARUP 4236CT 3.5 MTR tyne conditioner late model one owner .......................................................... POA 

KUHN 350G 3.5 MTR steel flail conditioner, swivel hitch ........................................................................ POA 

TAARUP 4036 3.5 MTR flail mower conditioner one owner ..................................................................... POA 

VICON EXTRA 632T 3 mtr fiail mower conditioner linkage mount ........................................................... POA 

TAARUP 307 3.2 MTR flail mower conditioner......................................................................................... POA 

MOWERS 

TAARUP 2832F 3.2MT FRONT MOUNT DISC MOWER late model ............................................................. POA 

CLAAS 260 DISCO disc mower going through workshop ....................................................................... POA 

LELY 320 3.2MT disc mower one owner ................................................................................................. POA 

ROUND BALER 

MCHALE V660 5X4 ROTOR FEED ONE OWNER ............................................................................. COMING IN 

MCHALE V640 5X4 ROTOR FEED one owner baler going through workshop ........................................... POA 

WELGER 445 5X4 ROTOR FEED AND KNIVES LATE MODEL BALER ........................................................... POA 

WELGER 520 6X4 ROTOR FEED AND KNIVES GOOD BALER ...................................................................... POA 

CASE 528 5X4 rotor feed net wrap and knives........................................................................................ POA 

CASE 628 6X4 rotor feed net wrap .......................................................................................................... POA 

JOHN DEERE 535 6X5 baler has net ....................................................................................................... POA 

CLAAS 280 6x4 roto feed string and net ..................................................................................................POA 

JOHN DEERE 467 6x4 Round Baler roto feed and net ............................................................................ POA 

CLAAS 280, 6x4 roto cut, string and net ................................................................................................. POA 

GRASSLANDS, 6x4 Silage Baler, wide pick up ........................................................................................POA 

JD 590, 6x4 Round Baler, going through workshop ............................................................................... POA 

HAY RAKES 

MASSEY FERGUSON 10MT twin rotor rotary rake ........................................................................ COMING IN 

GENDORE 6500 6.5 twin rotor rotary rake ..............................................................................................POA 

KUHN GA 7301 7.5 mt twin rotor rotary rake .......................................................................................... POA 

SQUARE BALERS 

MASSEY FERGUSON 2170 3x4 rotor cutter tandem axle .............................................................. COMING IN 

MASSEY FERGUSON 190 4X4 going through workshop has 2190 crank and reduced height chamber ..... POA 

NEW HOLLAND 1210 3x4 Square Bale ................................................................................................... POA 

MF 185 3x3 Square Baler ....................................................................................................................... POA 

CASE 8580, 4x4 Square Baler ................................................................................................................ POA 

CASE 8570 3x3 Square Baler ................................................................................................................. POA 

SPREADERS 

AMAZONE 1500 LINKAGE MOUNT twin spinner ....................................................................................... POA 

SEEDERS 

DUNCAN RENOVATOR 19 RUN DUAL BOX WITH COULTERS FULLY SERVICED ........................................... POA 

FFM-TV-NMAI-5012666-A


Hado Pty Ltd ATF Intersales Unit Trust 

ABN 64 160 069 925 / ACN 001373 726 

80 Hoskins St, PO Box 178, Temora NSW 2666 

Ph: 02 6977 1933 

270-272 Hammond Ave, Wagga Wagga NSW 2650 

Ph: 02 6951 5515 

8-14 Oakes Road, Griffith NSW 2680 

Ph: 02 6962 6831 

www.intersales.com.au - admin.temora@intersales.com.au 

CASE IH 8230 8230 2012, Combine, rotor 1377 and engine 1651 hours. 620/70 R42 front duals, 50%r rear singles 

600/70, R38 50%. RTK guidance with NAV and 262 Pro 700 screen. Tidy cab. Fixed auger. R2012 45 foot 2152 Case 

Macdon front with Leigh trailer, no top X auger. (to be serviced). Located in Griffith. TA1092235. $396,000 

CASE IH 7088 7088 2009, combine. Base Unit only. 2915 Rotor hours and 3884 engine hours. Front 900/60 R30 and 

rear 540/65 R30 50 %. Full precison and service done. Pro 600 screen , Ezi-steer 500 steering system, camera kit with 

monitor. Tidy unit. Located In Griffith. TA1091773. $125,000 

CASE IH STEIGER 600 new engine and PTO 2012, 10130 

hrs on drive line, NEW factory reco eng fitted 0 hrs with 

warranty, 1000 PTO, 4 remotes, 16 speed power shift 

trans, dual 800/70r38 tyres 30-40% , nav, pro 700, 372 

RTX, steer, red leather seat and training seat, new engine 

to fitted. TA1092176. $187,000 

CASE IH RB 464 RB464 2009, round naler, 19.0/45-17 

tyres, approx 32,000 bales, good condition, ready for 

work, in stock - Intersales Wagga Wagga. TA1091667. 

$23,100 

CASE IH 2388 and 1010 30ft 1999, 1999 with 30ft 1010 

front, 3 axle trailer, 7861 Eng hrs, 5690 rot hrs, 30.5x32 

tyres. 14.9 x 24 rear sound, big top, pro 600 monitor, Uhf, 

radio, enhanced spreader system, bat reel straight, no 

rust. TA1092211. $49,500 

NEW HOLLAND T8.435 T3435 2015, Smartraxx. 1400 

hours, front linkage high spec cabin. Steer ready, 

Intelliview 4 screen, 5 rear remotes with joystick, rear 

Linkage with quick hitch.420/85 238 front and 18 inch 

rear tracks on 2.0m centres. Located in Griffith. TA1079055. 

$250,000 

HARDI UNKNOWN 7030 COMMANDER Hardi Commander 

7000 litre with 30m force boom. Hydraulic lift, fold and 

Wing Tilt. Single nozzles, adjustable suspension axle, 

hydraulic turn assist, Hardi 5500 controller.3 inch Fill. 

Hydraulic drive 464 pump. Mudguards and rear oversize 

sign kit. 20..8 r42 wheel gear. Sold as is Located in 

Griffith. $38,500 (INC). TA1080538. $38,500 

AGRI-SPREAD UNKNOWN AS120 single belt spreader, 

Apollo display, 650/65-30.5 flotation tyres at 90%, 

rollover tarp, minimal work, ready for work, in stock 

Intersales Wagga Wagga. TA1091561. $99,000 

FLEXI COIL PD5700/3850 PD5700/3850 2012, 

parallellogram precision hoe drill 60' (18.3mt) width in 5 

sections 12" spacings on 3 ranks, 5.6mt transport width 

60 row units - double shoot opener, smooth profile 

packing wheel, individual depth control and fully 

adjustable breakout (275-55lb) from the cab seat seeder 

is matched up with a Flexicoil 3850 tow behind Air Cart 3 

bin 380bu capacity (13,400lt) split in litres 

4,150/3,300/5950 Flexcontrol IV 254mm (10") 

Load/unload auger. TA1029421. $181,500 

FLEXI COIL ST830 BAR & SC180BIN New Holland 

Flexi-Coil ST-830, 34ft, 58 tynes, 350lb trips, 4 row finger 

harrows, single shoot, small seeds heads and hoses, 

wedge points and adaptors, New Holland Flexi-Coil 

SC180 THB trike air cart, PJ greens small seeds, 

hydraulic auger, A-1 condition. TA1077378. $104,500 

MILLER NITRO 4365 with macdon adaptor 2011, 

sprayer, approx. 3500hrs, 520/85r38 tyres 80%, 6000l 

tank, 30mt boom, mudguards, 3 sensor raven auto height 

control, triplet nozzles 25cm, 7 section, auto grease, 

50kmh, hydro transmission, led under boom lights, 8.7lt 

Cummins eng, 365HP, case XCN 2050 controller, nav 11, 

auto section control with field IQ section control, adaptor 

for MacDon draper. TA1036994. $231,000 

CASE IH 4430 Aim Command pro 2015, 2014 build/2015 

model Case IH Patriot 4430, approx 2100hrs, boom 

prime, aim command pro, 36.5Mt boom, 6000lt, 

Autogreaser, 372/Nav controller, Pro700, seat covers, 50 

lightbar, 620/70r38 tyres, wide guards, approx.60%, 

reverse camera, oversize signs, chem inductor, good 

order. TA1092396. $396,000 

HARDI NAVIGATOR 4024 4000l tank, 24 MT parallel lift 

boom, hydraulic fold, 4 x section HC 5500 controller, 363 

PTO drive pump, Granni pot and Vac, flush tank, hand 

wash. TA1092397. $27,500 

CROPLANDS PEGASUS 6000 pegasus 6024 2016, 

BT60/24HW 602015 6000tlr 24Mtr boom with wing lift, 

AR185 hydro drive pump, Chem hopper single body 

nozzles, Bravo 180S 5 section controller RH fence line 

nozzle, oversize sign and rear lights , 20.8.x42 tyres very 

tidy, in stock Intersales Wagga Wagga. TA1092398. $71,500 

FFM-FP--5011483-D

SPRAYERS 

8 PAGE SPECIAL FEATURE 

Issue 382 > $7.95 > On sale 27/02/20 

Tractors, farm machinery & materials handling equipment for sale 

>> TESTED 

Four High, Two Tonne 

Tobroco Giant 6004 Loader 

Off the Chain 

Hustler’s Chainless LX104 Bale Feeder 

Fully Charged 

Ram 1500 Laramie V6 Ecodiesel 

$24,750 $160,000 

$199,980 $50,000 

CASE IH 695XL. 70hp, Cabin, Challenge 349E 

front end loader + more • NSW 0429 467 147 

Serafin Machinery brings Czech manufacturer 

Farmet’s range of deep and disc cultivators to 

the local market >> Page 14 

2016 GVM Mako. Spra coupe, 2vm boom, 

1500L tank. • NSW 0488 442 372 

2018 New Holland T7-260. 220hp, L4500 

loader + much more • VIC 0402 851 544 

items for sale 

44,480+ in print & online 

2017 Kioti RX8030SP. ROPS, Loader & 4in1, 

had only light work • QLD 0437 113 771 

Trucks, utes and 

8,340+ 4x4s now for sale! 

4/3/20, 2:48 pm 

Page 1 of 1 


SEARCH 

4/3/20, 2:48 pm 

Page 1 of 1 

NEW AND USED TRACTORS FOR SALE IN 

AUSTRALIA BAUER TRADER MEDIA 

Find new and used Tractors for sale with Farms & Farm Machinery 

magazine 

NEXT 

SEARCH 



list map 


AUSTRALIA 

Find new and used Tractors for GET sale ALERTS 

with Farms & Farm Machinery 

magazine 

CASE IH MAXXFARM 25 TRACTOR NEXT 

$19,750 



list map 

GET ALERTS 

CASE IH MAXXFARM 25 TRACTOR 

$19,750 

Tractors / Tractors / 0-40hp 

RefCode: TA978637 Class: 0-40hp Drive Type: 4WD 

FEL: YES Rated Engine Power - hp: 28 

4 wheel assist, 3 point linkage, roll frame, Front End Loader, approximately 380 

hours indicated, with books, approximately 28 horsepower, AS NEW *price 

includes gst 

Mclaren Vale, SA 

Tractors / Tractors / 0-40hp ! CALL 08 7007 6847 


FEL: YES Rated Engine SAVE Power - ITEM hp: 28 



includes gst 

EMAIL SELLER 


KUBOTA 8540 

! CALL 08 7007 6847 

$22,000 

SAVE ITEM 

EMAIL SELLER 

KUBOTA 8540 

$22,000 


RefCode: TA994405 Class: 40-100hp Drive Type: FWA 

Number Cylinders/cc: 4 Rated Engine Power - hp: 85 

Usage Hours: 5,800 

Kubota 8540 Fwa wet clutch forward , reverse shuttle air/ con. Runs and drives 

very well. Xgoverment . Inspection most welcome 

Stonyford, VIC 


! CALL 03 8547 8644 



Usage Hours: 5,800 SAVE ITEM 



EMAIL SELLER 


KUBOTA L1-24DT TRACTOR WITH 4 IN 1 

! CALL 03 8547 8644 

FEL 28HP 

$21,450 

SAVE ITEM 

EMAIL SELLER 


FEL 28HP 

$21,450 



FEL: YES Number Cylinders/cc: 3/1462cc 

Rated Engine Power - hp: 28 

KUBOTA L1-24DT - 28hp 4WD DIESEL. The Kubota L1-24DT offers quality 

Japanese small tractor engineering. Its smooth, direct injection diesel engine is 

coupled with a higher specification shuttle shift transmission. With forward and 

reverse at your fingertips, this machine is the front end loader specialist. 

Emu Plains, NSW 


! CALL 02 8315 0078 



Rated Engine Power - hp: 28SAVE ITEM 



coupled with a higher specification EMAIL shuttle SELLER 

shift transmission. With forward and 



KIOTI RX8030 FEL 

! CALL 02 8315 0078 

$42,995 

SAVE ITEM 

EMAIL SELLER 


$42,995 


HAYMOWERS SLASHERS MULCHERS 

Powered by 

Reduce your cutting time! 

Call us on 08 8584 7609 or visit 

www.loxtonengineering.com.au 

16 Starcevich Road, Box 18 LOXTON SA 5333. Fax 08 8584 6380 

A/H: (03) 5382 4234 

Fax: (03) 5381 0380 

Mobile: 0418 810 370 

87-89 Dimboola Road, 

HORSHAM, Vic 3402 

ABN 47 1934 965 94 

Tel: (03) 5381 0370 

RESEARCH • COMPARE 

• BUY • SELL 

AUSTRALIA’S 

#1 

FARM 

MACHINERY 

MARKETPLACE * 

BUY 

More than 40,000 tractors, 

spreaders, harvesters, hay 

tools, feeders, sprayers, 

trailers, and attachments, and 

other parts and accessories 

currently listed for sale 

SELL 

Unlimited stock 

listings on 


for just 

$360 per month 

Pivots Engineered for Australia 

D2C Direct to Consumer – new and lean online 

marketing methods – PIA are the national 

accredited agents for RKD of Spain. Service agents 

are strategically located around the nation; spares 

are ex warehouse Sydney. 

Buy Direct and Bank the Difference. 

Call us today for a chat, followed by obligation free 

design and quotation. 

0457 326 106 

GASON 1880 RT2 

2 bin, ground drive, 

rear tow air seeder 

*Coming In*. HM811C. TA1069941. 

$41,800 

2c Gore Street, Naracoorte, S.A. 5271 

admin@pia-online.com.au 

www.pia-online.com.au 

GASON 1880 FT3 

VRT air seeder. HM814. TA1095128. 

$44,000 

SELL YOUR 

FARM 

MACHINERY 

,!3BD0A6-aaejdg!:K;N 

Czech 

MATE 

www.TradeFarmMachinery.com.au 

* Based on stock items for sale as at March 2020 

VISIT THE WEBSITE 

OR CALL 1300 362 272 

GASON 1850 RT2 

air seeder c/w small seeds pasture 

planter in excellent conditions 

HM808. TA1061639. 

$33,000 

For our full range of equipment please visit: 

hicks-machinery.tradefarmmachinery.com.au 

FFM-TV-5013318-A


MAKING YOUR LIFE A BREEZE 

smallaire.com.au 

Manufacturers of Air Movement Products since 1974 

Grain drying systems 

Grain Aeration Systems 

High Pressure Blowers 

Stirring/Wall & Roof Fans 

Airseeder components 

Commercial/Domestic AC systems 

Ph: (03) 5382 5688 

170 Golf Course Rd, Horsham VIC 

Ph: 0418 997 646 4/70 Strickland Street, South Perth WA 

 

FFM-SH-5032334-TS-361 

SELL YOUR FARM MACHINERY 

VISIT TRADEFARMMACHINERY.COM.AU/SELL OR CALL 1300 362 272 

37 Cornelia Creek Road 

Echuca 3564 

Tel: (03) 5482 2788 

A/H Damien Trencher 0428 822 788 

92 Karook St 

Cobram 3644 

Tel: (03) 5871 3333 

A/H Mario Mete 0438 389 916 

POETTINGER 3507T Rubber Roll Mower Conditioner. 

250101152. TA1093042. $38,500 

NEW HOLLAND T4.65 POWERSTAR 2017, New Holland 

T4.65 Powerstar 899 hrs. 1200032. TA1092978. $33,000 

NEW HOLLAND H7230 Trailing Mower Conditioner, two 

point swivel linkage hitch, 540 pto, rubber rollers, new 

skids, going through workshop. At our ECHUCA YARD. 

Contact 03 5482 2788. S472. TA1076780. $28,600 

NEW HOLLAND CR9080 2009, 83C 40ft draper front 

(Macdon) on trailer, 2724e & 1971r hrs, twin 22" rotors, 

MAV chopper, singles. FINANCE RATE OFFER from 1.99% 

*conditions apply. S353. TA930864. $308,000 

NEW HOLLAND T7.250 LWB, 50 khm, front suspension, 

front weights, going through workshop, 205 engine hp, 

6913 hours, GPS fitted. At our Echuca Dealership 

0354822788. S482. TA1086635. $88,000 

AGRONIC 1022 Twin Satellite 9490 bales. S485. TA1093025. 

$36,300 

NEW HOLLAND TSA100 4 cylinder, 6542 hrs, 2 sets of 

remotes, 460/85R34 rear tyres, 380/85R24 front tyres, 

100 hp, Quicke Q950 loader, fitted with soft ride, 2.1 

meter bucket, at our ECHUCA dealership 03 5482 2788. 

S468. TA1071806. $52,800 

POETTINGER 701A Poettinger 701A Rotary Rake 

Excellent condition. 2880002901. TA1093039. $26,400 

For our full list of available equipment please visit: 

http://echuca-rural.tradefarmmachinery.com.au/ 

WEBSITE UPDATED DAILY http://www.echucarural.com.au 

FFM-HH-5011691-A 


VISIT TRADEFARMMACHINERY.COM.AU/SELL OR CALL 1300 362 272

PRIVATE Advertising 

www.tradefarmmachinery.com.au/sell 1300 362 272 


VISIT TRADEFARMMACHINERY.COM.AU/SELL OR CALL 1300 362 272 

VERSATILE 400 ROW CROP FWA 

2020, Cummins QSL 9.0 Engine 

With 400hp, 74655320. NSW. 

DIY1092488. 0427 923 113. $370,700 

JOHN DEERE 466 2000, Baler, 466 

string only. Very reliable, ready to 

bale hay, E00466s144969. VIC. 

DIY1091682. 0429 808 378. 

$8,800 John Deere Baler 2000, 466 

String only 

TRACTOR TYRES NEW 

BRAND NEW tractor tyres. Various brands, BKT, Harvest, 

Logger tyres, Apollo, Goodyear, Firestone, TIANLI Nokian, 

Simex, Westlake etc. Most sizes, bias & radial / forestry, 

truck & earthmover as well. Call Mick anytime, .. QLD. 

DIY561636. 0413 389 356. 

$99 From 

FORDSON FARM MAJOR Restored. 

Good working order, T-S-4-61. 

QLD. DIY1091507. 0438 023 632. 

$8,000 

ALLIS CHALMERS G Restored - 

cleaned, painted, battery isolator, 

new decals, G. QLD. DIY1091487. 

0438 023 632. $14,000 


MASSEY FERGUSON 240 Excellent 

condition and extremely 

reliable.regularly serviced, 500076. 

VIC. DIY1094377. 0438 113 371. 

$10,500 

DEUTZ-FAHR 6135G 2020, 

Deutz TCD2012 2V Tier 3 Diesel 

Engine, 6 Cyl/6057cc 

Turbocharged/Intercooled, 

12196281. NSW. DIY1092495. 

0427 923 113. $140,800 

TRADEFARMMACHINERY.COM.AU/SELL 

OR CALL 1300 362 272 

INTERNATIONAL 886 TRACTOR 

International 886 with Linkage 

120HP, good motor and tyres, fully 

operational, 358DT2A00. VIC. 

DIY1091680. 0429 808 378. 

$6,500 International 886 with 

Linkage 120HP 

FERGUSON TE20 Reconditioned. 

Runs very well, 9291. QLD. 

DIY1091527. 0438 023 632. $6,000 

DIESEL WATER PUMP UNITS 12 

Perkins or Hatz diesel engines 

driving centrifugal pumps sizes 2" 

up to 5" flow. Manufactured using 

rebuilt or low hour engines and 

pumps, 123. WA. DIY1095268. 

0474 462 825. $8,000 

PERKINS 441 or John Deere diesel 

engines driving centrifugal pumps 

sizes 3" up to 6" flow. 

Manufactured using rebuilt or low 

hour engines and pumps, 123. WA. 

DIY1095127. 0474 462 825. $11,500 

KUBOTA BX25 2012, Tractor 

Backhoe-Loader, 65969. SA. 

DIY1092489. 0448 781 967. $25,500 

CHAMBERLAIN 9G CHAMPION 

Nearly complete restoration, 9G. 

QLD. DIY1094936. 0438 023 632. 

$14,000 

HATZENBICHLER 6.0 M HEAVY 

VERTIKATOR 2020, Air Seeder, 

Ben Lomond. NSW. DIY1089755. 

0458 248 007. $44,000 

CASE IH 370 MAGNUM 2012, CVT, 

ZCRD009184. SA. DIY1094587. 

0457 805 511. $242,000 

SELL YOUR FARM 

MACHINERY 

VISIT THE WEBSITE OR CALL 1300 362 272

DEALS 

Just 

$154,000 ! 

Scan to view: 

Scan the QR Code with your phone camera 

to find out more about these Hot Deals! 

Just 

$16,500 ! 

Scan to view: 

2010 Case IH 435 Steiger 

or call 

08 6336 7780 

Power shift trans - duals - ATU 300 - 4 SCV remotes - Greenstar ready - 435 HP - 5537 engine 

hours. Location - Esperance, WA. 

2017 New Holland Workmaster40 

or call 

08 6336 7780 

40 HP – Approx. 750 hours when available late July 202. For more information, contact Ethan. 

Location - Moora, WA. 

Just 

$462,000 ! 

Scan to view: 

Just 

$110,000 ! 

Scan to view: 

2015 John Deere S690 Combine Harvester 

or call 

08 6336 7780 

With 640D Platform, singles, 2WD, Yield Monitor, Contour Master (Lateral Tilt Feederhouse), 

PowerCast Tailboard, Power Folding Bin Extension. 

2019 John Deere 1830 

or call 

08 6336 7780 

Seeder bar - 40ft @ 10” spacing - double shoot - stiletto seeding boots as pictured - car tyre 

press wheel upgrade. 

Just 

$132,000 ! 

Scan to view: 

Just 

$165,000 ! 

Scan to view: 

2014 Bourgault 3320˜76 

or call 

08 6336 7780 

2014 Bourgault Paralink 3320˜PHD Air Seeder Bar - Factory 76’ been converted to 80’ 

2013 Challenger MT 765D 

or call 

08 6336 7780 

25” tracks on wide spacing - 350 HP – PTO. Rear 3-point hitch - 20 x 45kg nose weights - 8 x 

57kg each side idler weights - 4200 engine hours. Location - Carnamah, WA. 

Just 

$88,000 ! 

Scan to view: 

Just 

$132,000 ! 

Scan to view: 

2015 Bourgault 3320 

or call 

08 6336 7780 

40’ @ 12” Spacings, 40 Tynes, Root Boot, Liquid Ready, Double shoot, 12.2 Metre Working 

Width. Fitted with High Floatation Kit. Location - Geraldton, WA 

2010 John Deere 9770 STS 

or call 

08 6336 7780 

Premier cab, level land feederhouse with reverser and °ixed speed drive system, 3.15” (80 mm) 

feederhouse lift cylinders. 

84 TradeFarmMachinery.com.au THE TRACTOR YOU WANT IS NOW EASIER TO FIND



Just 

$368,500 ! 

Scan to view: 

DEALS 

Just 

$302,500 ! 

Scan to view: 

2013 Claas Lexion 760 

or call 

07 3171 1142 

1,200 sep hours, and with nothing more to spend, this machine has been inspected and 

repaired by quali˜ied CLAAS technicians. 

2016 Claas Lexion 760TT 

or call 

07 3171 1142 

Price is for base unit only but front options available. 1800 engine hours, 1300 sep hours at 

time of trade, 635mm tracks on 3m centres. 

Just 

$385,000 ! 

Scan to view: 

Just 

$143,000 ! 

Scan to view: 

2014 Claas Lexion 760 

or call 

07 3171 1142 

41ft Midwest front & trailers. 1,330 engine hrs & 902 e° ective working hrs, 635mm Terra Trac 

on 3m centres, Cat C13 engine, auto contour for Vario front, 11,500L grain tank. 

2014 Deutz-Fahr Agrotron 6210 

or call 

07 3171 1142 

lightly used tractor, 1,344hrs, 210hp cab tractor, 4WD, 540/1000 PTO, 4 remotes, hook end 

linkage, front weight pack, aircon, good rubber, paint & panels in excellent Cond. 

Just $8,320 ! 

Scan to view: 

Just 

$6,000 ! 

Scan to view: 

Kubota T Series 

Kawasaki 21.5HP motor. 48 fabricated steel deck. In stock ready to go. 

or call 

03 9116 6686 

Polaris ACE 325 

checked over and serviced in our workshop with 764hrs/8294km. 

or call 

03 9116 6686 

Just 

$309,900 ! 

Scan to view: 

Just 

$9,900 ! 

Scan to view: 

2012 Class Lexion 75˜TT 

2wd or 4wd and a dual overhead cam motor. 

or call 

07 3171 1142 

Vermeer 504L 

Round baler. Net wrap. Good condition. Did 80 bales last week with no issues. 

or call 

03 9116 6686 

THE TRACTOR YOU WANT IS NOW EASIER TO FIND TradeFarmMachinery.com.au 85

DEALS 

Just $3,999 ! 

Scan to view: 



Just 

$3,500 ! 

Scan to view: 

Kubota KD5500 

Diesel generator. 5.5 KVA generator, OC95 diesel engine. 5.5lt fuel tank. 

or call 

03 9116 6686 

Cub Cadet 2042 

or call 

03 9116 6686 

Mower in good working order, has been serviced and checked in our workshop. Twin cam 

19hp Kohler motor with 42inch deck. 

Just 

$35,995 ! 

Scan to view: 

Just 

$55,000 ! 

Scan to view: 

Polaris RZR XP Turbo EPS 

or call 

03 9116 6686 

925cc 168HP turbocharged, twin cylinder, Fox podium shocks, 32” tyres is just a few features 

this o˛ road weapon has. Comes with $2000 free accessories of your choice. 

2018 Amazone Xtender Seed Hopper 

or call 

03 8547 8799 

4200L hopper with 50/50 split, transport wheels, Comfort Pack with Twin Terminal 3.0 for 

easy calibration, Cat III tractor and implement mount, radar speed sensor. 

Just 

$92,400 ! 

Scan to view: 

Just 

$93,500 ! 

Scan to view: 

2018 Amazone ED 6000 

or call 

03 8547 8799 

ED6000˜2 Precision Planter. 12 rows with 50cm spacing. Contour coulter units with Pro°i Hyds 

and full ISOBUS control. 7 singling disc options to suit a wide range of seeds. 

2017 Amazone Certos 5001 

or call 

03 8547 8799 

Heavy Disc Cult/Speed Tiller, 5m working width, Cat III Linkage, 660mm large scalloped discs, 

650mm Matrix pro°ile wedge ring roller, crushboards, side levelling discs. 

Just 

$15,400 ! 

Scan to view: 

Just 

$108,900 ! 

Scan to view: 

2006 Claas Liner 680 

twin rotor, marsh rings °itted, has been through the workshop and is farm ready. 

or call 

03 8547 8799 


or call 

08 7007 6556 

Row crop tyres. Front - 320/90R32 Rear - 340/90R48. Front weights. Selling on behalf of 

customer. 




Just 

$63,800 ! 

Scan to view: 

DEALS 

Just 

$48,400 ! 

Scan to view: 

2009 Goldacres 6536EF Prairie 

36m, twin line, induction hopper, raven controller, hyd pump. 

or call 

08 7007 6556 

Hardi 7030 Commander 

or call 

08 7007 6556 

7000 litre with 30 meter boom. boom has been through workshop recently, hydraulic 

suspension, four sections and hydraulic driven pump. 

Just 

$286,000 ! 

Scan to view: 

Just 

$8,800 ! 

Scan to view: 

2017 Hardi 5500 Saritor 

or call 

08 7007 6556 

42.5M Pommier air boom on 250MM nozzle spacing with 3 way nozzle bodies, 2750 hrs, 

480/80R50 tyres, Hardi HC9500 monitor and 10 boom sections. 

Maschio Bella 190 

190 o° set Mulcher, 1.95m wide. 

or call 

08 7007 6556 

Just 

$48,400 ! 

Scan to view: 

Just 

$203,500 ! 

Scan to view: 

Morris Concept 2000 

54ft (16.46m) 400lb spring breakout, ˜loating hitch, double fold 9 inch spacings. 

or call 

08 7007 6556 

2017 Bourgault L7550 

New stock clearance program. Bourgault L7550AU air seeder leading 19. 

or call 

08 7007 6556 

Just 

$60,500 ! 

Scan to view: 

Just 

$101,200 ! 

Scan to view: 

Case IH PTX600 

or call 

08 7007 6556 

62’ working width, 9” row spacings, 350Ib breakout, double shoot tow between air kit and 

Kelly prickle chain gang modules. 

2014 Case IH LB434 Baler 

or call 

02 9064 7288 

Standard Roto Feed Baler, 1000 PTO Drive, 6 Stringer, w/ Electric Fans, Case Pro-700 Monitor, 

Bale Count 32,708. 


DEALS 

Just 

$550,000 ! 

Scan to view: 



Just 

$495,000 ! 

Scan to view: 

2017 Case IH 9240 

or call 

02 9064 7288 

1259 engine and 922 rotor hrs. Single 800/70R38 drive tyres, Pro 700 display with Nav 

controller and 372 receiver, folding unload auger, Hyd folding grain tank extensions. 

2016 Case IH 8240 Combine 

With 1473 Engine 978 Rotor Hours, 800/70R38 drive tyres, Pro 700 display. 

or call 

02 9064 7288 

Just 

$60,500 ! 

Scan to view: 

Just 

$48,345 ! 

Scan to view: 

2018 Faresin PF 1.11 

or call 

02 9064 7288 

Vertical Mixer, 11 cubic mtr capacity/4,400kg, 540 PTO w/ 2 speed gearbox, 12 volt digital 

scales working o˜ 4 load cells, horizontal unload conveyor delivering left and right. 

or call 

02 9064 7288 

2020 Aitchison 4124CT Direct Drill Combine 

24 run @ 5spacing, front manually adjusted coulters, hyd rear transport wheels & tow hitch, 

540L seed & 540L fert Capacity, 3m sowing width. 

Just 

$80,000 ! 

Scan to view: 

Just 

$50,600 ! 

Scan to view: 

2019 Croplands Weedit Linkage Sprayer 

or call 

02 9064 7288 

12mtr Operating Width, End Tow Transport Hitch w/ Hyd Drop down Wheels, Folding Wings for 

Narrower Gate Access, 600ltr Main Tank & Flush Tank. 

2021 Unia Ares 3.5 

or call 

02 9064 7288 

Multidisc trailing tiller, drawbar unit, 3.5m cutting width, machine weight of 3880kg, hyd 

drawbar pitch control, hyd rear cage roller control, hyd lift, 3 sets of remotes required. 

Just $4,730 ! 

Scan to view: 

Just 

$26,500 ! 

Scan to view: 

2017 Cosmo Bully UH˜60 Rotary Hoe 

or call 

02 9064 7288 

540 PTO drive, 8” friction clutch. 7 rotor °langes w/6 curved blades on each rotor suit 50/75hp 

tractor 1680mm cutting width. 

Horwood Bagshaw 4000 

4000 L tow behind aircart, single fan, 6 run primary hose kit. Farmscan monitor. 

or call 

03 8547 8800 




Just 

$132,000 ! 

Scan to view: 

DEALS 

Just 

$71,500 ! 

Scan to view: 

2016 Krone BP 1290HDP 

or call 

03 8547 8800 

XC High Speed 6 String Baler, 41,200 Bales, X˜Cut Chopper, Bale scales, Tandem Axle, Monitor, 

Grevillia Inoculant applicator. Good Cond. 

2012 Goldacres Prairie Evolution 

or call 

03 8547 8800 

6500L 32M twin line boom spray, 4400 Raven controller, 12v chemical pump,18.4˜38 tyres 

currently on 3m tracks and air bag suspension, 5 sections, hyd drive. 

Just 

$27,500 ! 

Scan to view: 

Just 

$50,000 ! 

Scan to view: 

John Deere 787 Air Cart 

180Bu 2 Bins, Loading Auger, 6 Runs Primary (Max 8). 

or call 

03 8547 8800 

2013 New Holland T4060F 

or call 

03 8547 8800 

100HP T4060F MFWD cab tractor, 280/70R20 front tyres 75%, 420/70R28 rear tyres 75%, 

front weights, window tint, seal guards. 

Just 

$27,500 ! 

Scan to view: 

Just 

$55,000 ! 

Scan to view: 

Goldacres Sprayer 

or call 

03 8547 8800 

5000L, 33m sprayer, dual line, CIH, TC, 300L fresh water, FM, Raven controller, 18.4 x 38 tyres, 

MG, PTO pump. 

2008 Goldacres 6530 

or call 

03 8547 8800 

6500L 30m dual line, Raven controller, CIH, TC, 400L FW, 20.8x38 tyres, airbags, MG, direct inj 

tank, Hyd drive. 

Just 

$352,000 ! 

Scan to view: 

Just 

$155,000 ! 

Scan to view: 


or call 

03 8547 8800 

SP Sprayer, 2287 eng hrs, 887 spray hrs, A/T ready, 2630 screen, steel boom excellent Cond, 

just arrived. 

2019 Case IH Puma 165 Tractor 

or call 

08 7007 6557 

FPT turbocharged 6cyl engine, 19F and 6R gears, 40kph powershift trans, 167hp - with boost 

204hp, 3x mechanical remotes, 540/1000 PTO, multi-controller armrest, rear 3PL. 


DEALS 

Just 

$41,200 ! 

Scan to view: 



Just 

$10,990 ! 

Scan to view: 

2021 Case IH Farmall 60B 

or call 

08 7007 6557 

2.5L 4 cylinder diesel engine. 60hp. Air con cab, 4WD. 16 x 16 transmission. 540/750/1000 

PTO. 3 point linkage - 1850kg lift capacity. 

Kubota L2050 

or call 

08 7007 6557 

3 cylinder engine, 25 HP, 2x4 2WD, 3 point-linkage, PTO 540, 2 speed transmission. 

Just 

$29,700 ! 

Scan to view: 

Just 

$29,700 ! 

Scan to view: 

2000 Case IH CX80 

or call 

08 7007 6557 

80HP Perkins 4 cylinder engine - 10,134 hrs. Power Shuttle 24 x 24 transmission (Hi and Lo with 

creeper gears). Brand new clutch. 

2000 Case IH CX80 Cab Tractor 

or call 

08 7007 6557 

80HP Perkins 4 cyl eng - 10,134 hrs, power shuttle 24x24 trans, (hi and lo with creeper gears), 

brand new clutch, 3PL, aircon cabin, PTO, 2 rear remotes. 

Just 

$51,990 ! 

Scan to view: 

Just 

$74,900 ! 

Scan to view: 

2010 Kubota M8540 

or call 

08 7007 6557 

4424 hrs. KBF3000 forklift attachment. Engine 85.5 HP 4x4 MFWD 4WD. Transmission: 

Hydraulic-Shuttle 18 x 18. Creeper - low - high gearing. 

2020 Case IH Farmall 105C 

or call 

08 7007 6557 

3.4L FPT engine 107 HP. PTO 91 HP. 24 x 24 power shuttle Hi Lo transmission. hydraulic main 

pump ˜low 64LPM. Rear remotes x 2. 

Just 

$77,900 ! 

Scan to view: 

Just 

$79,970 ! 

Scan to view: 

2020 Case IH Farmall 105C ROPS Tractor 

or call 

08 7007 6557 

3.4L FPT eng 107hp, PTO 91hp, 24x24 power shuttle hi/lo trans, hyd main pump ˜low 64 lpm, 2x 

rear remotes, Challenge loader program upgrade from standard to a 4in1 bucket. 

2018 John Deere 5100M 

or call 

02 8279 7138 

Cab tractor, delivered June 2020, only 26 hrs, with extended powertrain warranty to June 

2022, power reverser 32/16 with Hi/Lo, triple rear remotes 




Just 

$495,000 ! 

Scan to view: 

DEALS 

Just 

$80,001 ! 

Scan to view: 

2016 John Deere S680 

or call 

02 8279 7138 

Complete with a JD640D on a Coolamon steelworks trailer, 1464 engine hours and 992 

separator hours, singles, command touch multispeed feederhouse drive. 

2002 Case IH 2388 

or call 

02 6171 3039 

36ft front with trailer. 2002 model 3731 engine hours (approx.) 2746 separator front tyres 

30.5L˜32 30% RH / 70% LH rear tyres 14.9˜24 10%. 

Just 

$198,000 ! 

Scan to view: 

Just 

$85,000 ! 

Scan to view: 

2014 John Deere 8360RT 

or call 

02 6171 3039 

4286 hours IVT transmission 18”tracks at 60% in good order (currently set on 2m) 7” GS3 

display, four sets of SCV’s. Three point linkage & PTO 227LPM hydraulic pump. 

2002 Case IH 2388 

or call 

02 6171 3039 

2388 combine 1042 draper 36ft with trailer & 2015 canola front less trailer. 2002 model engine 

hours 3592 (approx.), separator hours 2653. 

Just 

$286,000 ! 

Scan to view: 

Just 

$363,000 ! 

Scan to view: 

or call 

2015 John Deere 8370RT 

3011 hours, new 18 inch 6500 tracks, E23 transmission, 4 remotes, three point linkage with 

hydraulic top link, front and side weights. Located Gri° ith. 

or call 


1564 engine/1278 rotor hours, extd wear small grn combo, GS3 touch scrn7”color display, 3 spd 

electrical shift trans, 800/ 70r38 front tyres,600/ 70R28 rear. 

Just 

$42,350 ! 

Scan to view: 

Just 

$33,000 ! 

Scan to view: 

Vicon RV5116 

or call 

03 9116 6686 

Round Baler. Done 11,196 bales. New chain and drive sprokets. Full workshop service. 

2018 Krone Swadro TC760 

2018 Krone 760p. Twin rotary rake. Presents in very good condition. 

or call 

03 8373 7241 


DEALS 

Just 

$165,000 ! 

Scan to view: 



Just 

$30,800 ! 

Scan to view: 

2017 Krone BP 1290HDP 

or call 

03 8373 7241 

6 string square baler, comes standard with chopper, tandem axle, scales, Gazeeka ˜itted, 

controlled through Isobus 

2010 Pottinger Novacat 

or call 

03 8373 7241 

X8 butter˜ly mower 8 metre cut electric over hydraulic controls. Can be converted back to 

front and rear linkage easily. 

Just 

$49,500 ! 

Scan to view: 

Just 

$152,900 ! 

Scan to view: 

2018 Krone ECTC400CRS 

or call 

03 8373 7241 

Steel roller conditioner, centre pivot 2 point linkage hitch. Always shedded and serviced by 

Krone trained techs. 

2016 New Holland T7.210 T7 210 

or call 

03 8373 7241 

50K variable transmission. Front axle and cab suspension. PRO700 touch screen display with 

NAV and receiver for full auto steer. 

Just 

$49,500 ! 

Scan to view: 

Just 

$68,200 ! 

Scan to view: 

2018 Krone Comprima 

or call 

03 8373 7241 

Round baler, single axle rotor feed only rIn very good condition photos are straight out of the 

paddock, hence the dust. 

2004 Case IH CVX1135 

or call 

03 8373 7241 

Used cab tractor. Quicke loader bucket only. Front axle and cab suspension. 50K fully variable 

transmission. 650/65R38 and 540/65R28 tyre package. Electronic remotes. 

Just 

$19,990 ! 

Scan to view: 

Just $7,700 ! 

Scan to view: 

2020 Kubota DSX1875 

or call 

03 8373 7241 

New linkage spreader. Fitted with extensions to 3900 L. PTO drive. Folding hopper cover. Will 

spread area to 36 mts. 

Overum 5 Furrow Plough 

or call 

03 8373 7241 

Used 5 furrow mouldboard plough. Semi mounted with hydraulic width adjustment. Hydraulic 

stump jump. Plastic boards with coulters and skimmers. 




Just 

$13,990 ! 

Scan to view: 

DEALS 

Just 

$55,000 ! 

Scan to view: 

2020 Kubota DSM1100 

or call 

03 8373 7241 

Fitted with extension to 1550L. Folding hopper cover. Will spread area to 24 M. Fully assembled 

and ready to put to work. 

2015 Claas Quadrant 3300 

or call 

03 8373 7241 

Claas 3300 square baler. rotor feed, single axle, 6 knotters. Comes with Gazeeka ˜itted. Will be 

serviced and crop ready. Located Ballarat. 

POA 

Scan to view: 

Just 

$105,490 ! 

Scan to view: 

2021 Krone ECTC500CRS 

or call 

03 8373 7241 

Mower conditioner. 5M cut with steel on steel conditioner. 1000 PTO. Ideal for cereals/vetch 

etc. Brand new, just arrived in the country. 

2009 Excel Stubble Warrior 

or call 

08 7007 6558 

2009 Excel Stubble Warrior, 300mm spacing, simplicity air kit to suit tow between bin, very 

good condition, located Bordertown. 

POA 

Scan to view: 

Just 

$56,000 ! 

Scan to view: 

JOHN DEERE S690 

or call 

08 7007 6558 

2014 John Deere S690 Header, Gen 3 2630 Display, 3230 Engine Hours & 1881 Rotor Hours, 

UHF & CD Player, 620 75R26 Rear Wheels & 520 85R42 Dual Front Wheels. 

2014 CASE IH 3152 

or call 

08 7007 6558 

40ft draper front, upper cross auger, trailer included, good Cond, located Bordertown 

Just 

$33,000 ! 

Scan to view: 

Just 

$88,000 ! 

Scan to view: 

John Deere 630F 

Hydra ˜lex front with a Leith trailer 

or call 

08 7007 6558 


or call 

08 7007 6558 

Header front, 30”, expandable platform, approx 500 hrs, ˜inger tine reel, table auger, great for 

direct heading canola 


DEALS 

Just 

$56,000 ! 

Scan to view: 



Just 

$55,000 ! 

Scan to view: 

2014 Case IH 3152 

or call 

08 7007 6558 

40ft Draper front, upper cross auger, trailer included, good condition, located Bordertown. 

2018 Active Machinery AL938LE 

650 hours. 150 KW engine power. 

or call 

08 7007 6558 

Just $3,850 ! 

Scan to view: 

Just 

$19,800 ! 

Scan to view: 

Hardi 2000L Vineyard Sprayer 

Located at Naracoorte, sprayer in average Cond, sold on “as is” basis. 

or call 

08 7007 6558 

2003 Kuhn FC532G 

Side pull Flail Conditioner. Located Naracoorte. 

or call 

08 7007 6558 

Just 

$198,000 ! 

Scan to view: 

Just 

$27,500 ! 

Scan to view: 

2010 John Deere 9770 Harvester 

or call 

08 7007 6558 

TBC 4500 eng hrs, 3000 rotor hrs, pro-drive, contour master, large wire and small wire 

concaves, chopper with manual vaneboard, 6.9m auger. Comes with 635D and trailer. 

FALC Agila 2500 

or call 

07 3073 8229 

Tough, vers, 120hp g/box, high clearance body and large material intake, will handle pasture 

topping or mulching of vegetables, potatoes, orchard and vineyard prunings 

Just 

$62,000 ! 

Scan to view: 

Just 

$63,000 ! 

Scan to view: 

Kuhn FC3160TCR 

or call 

07 3073 8229 

New Kuhn FC3160 TCS disc mower conditioner 3.1m cut centre pull with Gyrodine hitch for 

sharp turns. Rubber rollers. 

Kuhn FC3560TCR 

or call 

07 3073 8229 

New Kuhn FC3560TCR disc mower conditioner 3.5m cut centre pull, rubber roller conditioner . 




Just 

$63,995 ! 

Scan to view: 

DEALS 

Just 

$27,500 ! 

Scan to view: 

Kioti PX9520 ROPS FEL 

or call 

07 3073 8229 

NEW. With loader and 4 in 1 bucket, 95hp Perkins diesel engine, forward / reverse shuttle, 16 x 

16 trans, 4WD with di˜ lock 

Seraÿn ECO 4500 Folding Slasher 

4.5m cutting width, solid °illed tyres, 90˛130hp, folded transport width 2200mm. 

or call 

07 3073 8229 

Just 

$47,500 ! 

Scan to view: 

Just 

$78,995 ! 

Scan to view: 

Aitchison 4124CT 

or call 

07 3073 8229 

New Aitchison 4124CT direct drill min till combine with seed and fertiliser, coulters and coil 

tynes with tungsten points. 

Kioti PX1Q052 Cab 

New, 32F x32R power shuttle power shift trans, Loader with 4 in 1 bucket. 

or call 

07 3073 8229 

Just 

$104,000 ! 

Scan to view: 

Just 

$71,500 ! 

Scan to view: 

Strautmann 1801 

or call 

07 3073 8229 

New Strautmann 1801 twin auger mixer. Tandem axle on springs. Electrohydraulic controls. 

1200mm elevator on RHS. Stainless steel wear strip on augers. 2 speed gearbox. 

Massey Ferguson 2170 

or call 

03 8547 8801 

MF 2170 square baler, 2008 model. Gazeeka moisture meter, 46,640 bales, 700/50˛22.5 tyres, 

16ply-heavy duty, 80%, hydraulic fan on knotters. 

Just 

$302,500 ! 

Scan to view: 

Just 

$60,500 ! 

Scan to view: 

Case IH 8230 2012 Model 

With 45 Ft Front Axial Flow Combine Harvester, 2965 Rotor Hrs, 3890 Engine Hrs 

or call 

03 8547 8801 

Case IH Concord 2000 Model 

or call 

03 8547 8801 

48ft, double fold, 12 spacing, s/shoot, coulters on rear tyres, comes with Alfarm A550, MKIII 

tow between air cart. Will separate. 


DEALS 

Just $7,900 ! 

Scan to view: 



Just 

$313,500 ! 

Scan to view: 

2018 Can-Am Outlander 450 PRO 

or call 

03 8547 8801 

As traded, 427cc 4 stroke engine, approved roll over protection installed, front mount tool/ 

accessory box, 4X4, dynamic power steering(DPS), rear tyres like new, 8700km’s 

2015 Case IH 7140 

or call 

03 8547 8801 

Rice Combine Harvester, 1380 rotor hrs, small tube rotor for capacity in rice but also performs 

well in cereals, used in cereals, 900/60R32 tyres, 4WD mudhogs. 

Just 

$49,500 ! 

Scan to view: 

Just 

$24,200 ! 

Scan to view: 

Croplands Pegasus 6000 

or call 

03 8547 8801 

2008 model Croplands, 6000lt, 30mt with wing lift, 250lpm PTO driven. Located on farm 

Mildura. 

Vicon RO˜XL 1875 

or call 

03 8547 8801 

3 point linkage spreader. 3 x hopper extensions, 3900L capacity, hopper cover, PTO drive, 

wide vane spread kit. 

Just 

$220,000 ! 

Scan to view: 

Just 

$75,000 ! 

Scan to view: 

2010 Case IH 7088 

or call 

03 8547 8801 

Axial Flow Combine Harvester, AFX rotor, PRO700, Nav, 3094 rotor hrs, 4073 engine hrs. 

Comes with 2009 Case IH 2152 40ft Draper Front with Leith 4 axle trailer. 


or call 

03 6111 4727 

MFWD Cabin Row Crop Tractor 8.1L John Deere 185hp Diesel engine 20 forward/ 20 reverse 

40km/he PowerQuad transmission. One owner machine 

Just 

$118,500 ! 

Scan to view: 

Just 

$45,000 ! 

Scan to view: 

Kubota M7151 

or call 

03 6111 4727 

MFWD cab utility tractor, ˜itted with Kubota LM260S self levelling loader, 150HP 4 cylinder 

engine, 24 forward/24 reverse transmission, 3 rear remotes. 


or call 

03 6111 4727 

155hp, 6cyl engine, 20 speed powerquad trans, front axle suspension, 3 sets of rear remotes, 

520/85R42 rear tyres, 42085R30 fronts, good order 




Just 

$32,500 ! 

Scan to view: 

DEALS 

Just 

$72,500 ! 

Scan to view: 


or call 

03 6111 4727 

MFWD cabin tractor,127HP 6cyl turbo engine, 15 speed powershift transmission, dual rear 

remote valves, rear 20.5x38 dual wheels, 14.9x28 front wheels, front mud guards. 


or call 

03 6111 4727 

Large Frame Row Crop Tractor, 200hp 8.1L engine, rebuilt PowerShift trans, Dual 520/85R42 

rear tyres & single 16.9R30 front tyres, 4 rear remotes. 

Just 

$52,500 ! 

Scan to view: 

Just 

$10,500 ! 

Scan to view: 

2005 Case MXM130 Tractor 

or call 

03 6111 4727 

MFWD 130 HP Tractor ˜itted with Case LSX Self levelling Loader, has been through workshop, 

Good order, 480/80R42 Rear Tyres, 4 remotes, 3rd function on loader. 

John Deere Power Harrow 

or call 

03 6111 4727 

Valentini 6000 Maxi Diablo 6m Hyd fold power harrow. Levelling Bar Packer roller. Heavy duty 

gear boxes require minor work before service. 

Just 

$55,000 ! 

Scan to view: 

Just 

$363,000 ! 

Scan to view: 


or call 

03 6111 4727 

Premium cabin tractor, Triple link suspension, cabin suspension, Re-manufactured in˜initely 

variable trans passenger seat, 520/85R38 rear and 480/70R28 front tyres. 

2017 Hardi Saritor 5500 II 

or call 

03 8547 8800 

1,750 hours, 5,500L tank, 46.5m (153’)/48.5m (160’) aluminium boom, 8 sections, triple nozzle 

bodies, auto boom height control. 

Just 

$55,000 ! 

Scan to view: 

Just 

$55,000 ! 

Scan to view: 

2000 Grizzly West Coaster 92 

92 Plate 34’ disc, new set disc’s front row, rear row 50% (price reduced). 

or call 

03 8547 8800 

John Deere 9650CTS 

Harvester, 2894 Sep Hrs w/- chopper/Cha° er, fronts available, 4396 usage hrs. 

or call 

03 8547 8800 


DEALS 

Just 

$55,000 ! 

Scan to view: 



Just 

$104,500 ! 

Scan to view: 

2008 Goldacres 6530 

or call 

03 8547 8800 

6500L 30M dual line Goldacres sprayer, Raven controller, CIH, TC, 400L FW, 20.8x38 tyres. Air 

bags, MG, direct inj tank, Hyd drive. 

2015 Fast 8013N ZZ 

or call 

03 8547 8800 

40’ Liquid nutrient applicator. 5110L capacity, 120’ axle spacing, 320/90R46 tyres. Custom 

plumbed to 20’ opener spacings. 

Just 

$90,000 ! 

Scan to view: 

Just 

$46,200 ! 

Scan to view: 

2001 John Deere 9750 STS 

or call 

03 8547 8800 

5083 eng hrs and 3556 rotor hrs, 4WD grain machine, straw spreaders, New bullet rotor two 

years ago. 2004 936D Draper front with contractor’s comb trailer. 


or call 

03 8547 8800 

Centre pivot rotary mower conditioner, 4 metre cut, Tri-Lobe conditioner rollers, Rockshaft 

swivel hitch, hydraulic tilt control. Good condition. 

Just 

$137,500 ! 

Scan to view: 

Just 

$137,500 ! 

Scan to view: 

Krone BP 1290HDP 

or call 

03 8547 8800 

1290 HDP 6 string baler with 38411 bales non chopper with soft start, Krone auto grease 

system, croplands applicator, gazeeka moisture meter, scales. 

2016 Faresin FH7.45 GLS 

or call 

08 6336 7780 

140HP 40kph Telehandler - ex-dealer demo unit genuine 27 eng hrs - pallet forks included - 

4500kg lift capacity. 

Just 

$71,500 ! 

Scan to view: 

Just 

$242,000 ! 

Scan to view: 

2013 Simplicity TBL3 12000 

or call 

08 6336 7780 

2 tank con˜iguration - variable rate - TopCon Apollo - 2 dry/1 liquid - X25 screen - 3500Lt liquid 

- 6 run single shoot. 


or call 

08 6336 7780 

Combine harvester - singles - chopper - 800/70R38 front tyres - 750/65R25 rear tyres - 2652 

engine hours, 2091 sep hours. 




Just 

$275,000 ! 

Scan to view: 

DEALS 

Just 

$44,000 ! 

Scan to view: 

2012 John Deere S680 + 640D 

or call 

08 6336 7780 

2760 engine hrs, 2010 Sep hrs. 800/70R38 front singles & 23.1R26 rears - powerfold lids. 

PowerCast tailboard, iT4 engine. 

2005 John Deere 9660 STS + 936D 

or call 

08 6336 7780 

With 936D Draper platform - 4030 eng hours, 2700 sep hours - ATU steering - 800/65R32 

fronts - straw spinners. Location - Carnamah, WA. 

Just 

$102,850 ! 

Scan to view: 

Just 

$77,000 ! 

Scan to view: 

2015 Ausplow Multistream M15000 

or call 

08 6336 7780 

10 inch Auger, tow behind, hydraulic drive metering, 3m centre, four tanks, dual shoot, air 

dryer, 24.5x32 front tyres, 30.5x32 rear tyres. 

2005 Case IH STX425 

or call 

08 6336 7780 

425 HP - 8000 engine hours - 710/70R42 duals all round - Syncro transmission - 4 SCV remotes 

- rear weights. Location - Lake Grace, WA. 

Just 

$30,800 ! 

Scan to view: 

Just 

$297,000 ! 

Scan to view: 

2009 Flexi Coil 2340 

or call 

08 6336 7780 

TBH air cart - two tank metering - dual shoot - twin fan - ground drive - 340 BU. Location - Lake 

Grace, WA. 

2014 John Deere S680 + 640FD 

or call 

08 6336 7780 

640FD Flex Draper platform - singles - 2WD - yield monitor - Contour Master (lateral tilt 

Feederhouse) - PowerCast tailboard - power folding bin extensions - tier 2 engine. 

Just 

$99,000 ! 

Scan to view: 

Just 

$88,000 ! 

Scan to view: 


or call 

08 6336 7780 

Combine harvester. 3680 eng hrs, 3130 sep hrs, push button 3 speed transmission. 520 duals, 

separator only, tier 2 engine, prem cab. 6.9m unloading Auger. Rust protection. 


or call 

08 6336 7780 

2015 John Deere 1910 Air Cart. For more information, contact Jake Wilkins Location - 

Esperance, WA. 


4/3/20, 2:48 pm 

Page 1 of 1 

4/3/20, 2:48 pm 

Page 1 of 1 




magazine 

NEXT 

SEARCH 



list 


AUSTRALIA 



magazine 


$19,750 




$19,750 






includes gst 

EMAIL SELLER 


KUBOTA 8540 

! CALL 08 7007 6847 

$22,000 

KUBOTA 8540 

$22,000 


SEARCH 

GET ALERTS 

SAVE ITEM 

EMAIL SELLER 









! CALL 03 8547 8644 






EMAIL SELLER 



! CALL 03 8547 8644 

FEL 28HP 

$21,450 

SAVE ITEM 

EMAIL SELLER 

list 

map 

map 






includes gst 


Powered by 



FARM MACHINERY MARKETPLACE * 

BUY 

More than 40,000 tractors, 

spreaders, harvesters, hay tools, 

feeders, sprayers, trailers, and 

attachments, and other parts and 

accessories currently listed for sale 

SELL 

Unlimited 

stock listings on 


for just 

$360 per month 


* Based on stock items for sale as at March 2020

ISSUE 341 

Forklifts, Machine Tools, Pumps, Generators & Industrial Equipment 

king high 

Crown Equipment’s new counterbalance pneumatic forklift, the 

CD20-35NXP Diesel, is built to be the perfect fit for small and medium sized businesses. 

More at TradePlantEquipment.com.au 

$18,000 

2007 AIRMAN PDS185S-6B4-T screw compressor. 

4 cyl Nissan diesel, ready to use • VIC 0412 217 107 

$28,000 

2018 HAFCO METALMASTER PB-70. Pressbrake, 

fasfold + safety guarding system. • QLD 0413 380 615 

$27,500 

2016 EP CPYD70-RW5 Forklift. 6200kg lift capacity, 

perfect for warehouse work • VIC 0421 110 210 

17,750+ items for sale in print & online

AUSTRALIA’S 

LARGEST 

FORKLIFT 

WHOLESALER 

Contact us for a 

deal on a wholesale 

package of quality 

used equipment. 

1300 438 3675 

formidableforklifts.com.au 

6/220-230 Barry Rd, Campbellfield (03) 9357 6291 

Sales@formidableforklifts.com.au


www.flt.com.au FreeCall: 1800 688 788 Email: sales@FLT.com.au Contact: Michael Carlin 0418 299 555 

Stock located in Sydney, Brisbane, Melbourne, Perth 

KALMAR DCF370-12 

2012, 2 available and a pair of DCF330-12. 2,440mm forks, 

sideshift, fork positioner. Option 20x40 spreader. Mine site spec. 

R3548. TA828696. 

For Sale or Hire POA Freecall: 1800688788 

OMEGA 36D 

2010, stack highcube 20' containers 3 high. Enclosed air 

conditioned cab, excellent condition ready for delivery. R3467. 

TA737310. 

For Sale or Hire POA FreeCall 1800688788 

HYSTER H32.00F 

2008, Can stack 31,500kg highcube 20' laden containers 3 high. 

Option 40' Drive In Spreader. Low tech easy fix model. R3388. 

TA394061. 

For Sale or Hire POA 

SMV SMV12-1200B 

Ideal for furniture containers - stacks 12,000kg 20' highcubes 

Option 40' drive in quick attach spreader. R3560. TA846678. 

For Sale or Hire POA FreeCall 1800688788 

KALMAR (NEW) DRU450 

Reach Stacker from Global Industry Leading Port Handling 

Equipment Manufacturer. Immediate delivery available. S89. 

TA1081384. 

For Sale or Hire POA Hire to Buy 

HYSTER (NEW) H16XD-6 

16,000kg at 600mm load centre with 3750mm or 4650mm lift 

height, fork positioning sideshift and 2440mm forks. Mast on 

Transport 

Sale or Hire FreeCall 1800688788. R 8888. TA395730. 

POA For Sale or Hire Ph: 1800 688 788 

HYSTER H18.00XM-12 

2008, 18,000kg highcube 20' containers 3 high with 2440 forks + 

fork positioning sideshift. Option 14,000kg with ELME 558 Sidelift 

for 20' and 40' highcube. R3282. TA511086. 

For Sale or Hire POA $FreeCall 1800 688788 

OMEGA 7ECH 

twin picks and stacks 20x40 empty containers 7 high. Similar 5/6 

high low hour Kalmars also in stock. R3355. TA400307. 

For Sale or Hire POA Ph 1800 688 788 

HYSTER H16.00XM-6 

2440mmm long forks, fork positioning sideshift, 3500mm lift height 

easy transport lowered height Cummins diesel. R3629. TA1073594. 

POA For Sale or Hire Ph: 1800 688 788 

ISOLOADER 21 

Load unload and travel with 27t 20' and 40' containers. New Kohler 

diesel - Low cost container handler. R3621. TA1061595. 

Buy or Hire FreeCall 1800 688788 POA 

MOBICON 33T 

load unload and travel 33,000kg 20' and 40' shipping containers. 

For sale & wanted. R3299. TA148664. 

For Sale or Hire Ph: 1800 688788 POA 

www.FLT.com.au FreeCall: 1800 688 788 

PRENTICE 7,000KG SWL 

Forklift Truck Ramps (8) to pick from. Ideal for shipping containers. 

For Sale or Hire. Ph: 1800 688 788. R 3274. TA96974. 

$12,000 + GST = $13,200 For Sale or Hire 

PET-FP-5011476-B


SKYJACK SJ12 2011, 

12ft Electric Manlifts, plenty to choose from. 

227kg lift capacity all in good condition. 

Located in Melbourne, Sydney, Brisbane & 

North Qld. In test from October 2021 until 

July 2022. Various from M1209 - M1280. TA1085279. 

$3,500 + GST = $3,850 

JLG 340AJ 2011, 

34ft Diesel Knuckle Booms, 4 machines to 

choose from. 227kg lift capacity all in good 

condition. Located in Brisbane & Melbourne. 

In test from October 2021 until February 2022. 

Various from KBD3496 - KBD3499. TA1085281. 

$20,000 + GST = $22,000 

JLG 600AJ 

60ft 4WD Knuckle Booms. 10 machines offered 

and all are equipped with 7kVa on-board generators. 

These machines are all in test from June 2021 until 

April 2022 and are located in Brisbane & Melbourne. 

Various from KB6058 - KB6071. TA1033085. 

$40,000 + GST = $44,000 

JLG 800AJ 

80ft 4WD Knuckle Booms. 4 machines offered and 

all are equipped with 7kVa on-board generators. 

These machines are all in test from October 2021 until 

May 2022 and are located in Brisbane, Sydney & 

Melbourne. Various from KB8025 - KB8028. TA1045325. 

$52,000 + GST = $57,200 

JLG B660SJ 

66ft 4WD Telescopic Boomlifts. 3 machines offered and 

all are equipped with 7kVa on-board generators. These 

machines are all in test from November 2022 until 

December 2022. Located in Brisbane & Townsville. 

B6626, B6627 & BB6628. TA1019572. 

$50,000 + GST = $55,000 

JLG B860SJ 

86ft 4WD Telescopic Boomlifts. 8 machines offered and 

all are equipped with 7kVa on-board generators. These 

machines are all in test from August 2021 until March 

2022. Located in Melbourne, Sydney, Brisbane & 

North Qld. Various from B8617 - B8624. TA1053426. 

$38,000 + GST = $41,800 

MERLO P34.7 

3.4 ton, 7.0 metre Telehandlers. 2 machines offered. 

They are in test from March 2022 until October 2022. 

Machines are located in Brisbane & North Qld. 

T34702 & T34705. TA1085283. 

$40,000 + GST = $44,000 

0457 110 110 

sales@skyreach.com.au 

www.skyreach.com.au 

MERLO P38.13 

3.8 ton, 13 metre Telehandlers. 3 machines offered. 

In test from February 2022 until October 2022. 

Machines located in Brisbane and North Qld.T38135, 

T38137 & T381312. TA1019584. 

$50,000 + GST = $55,000 

JLG 4013PS 

4.0 ton, 13 metre Telehandlers. 4 machines offered. 

In test from December 2021 until June 2022. Machines 

located in Brisbane & Melbourne. 

Various from T40138 - T401312 

TA1065867. 

$55,000 + GST = $60,500 

PET-FP-5126550-A


HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES 

PTY LIMITED ABN 17 064 853 318 

2500KG Gas Forklift Hire From $100 Per Week 

KOMATSU FG25HT-16 

2.5 Tonne LPG Forklift with 4.5 Metre Lift. D013. 

TA1089915. 

$15,400 

TOYOTA CBTY4 

4 Tonne Electric Stand-on Tow Tug. 

CBTY4. TA1027566. 

$7,700 

TOYOTA 2TG10 

15 Tonne LPG Tow Tug. D098. TA1041341. 

$12,100 

BLISS FOX F1-80 

90 Tonne Diesel Tow Tug. 

K069. TA1046649. 

$77,000 

UNKNOWN HIRE 

Large Range of Forklifts Available for Hire - From 

$100+GST Per Week. 

HIRE. TA618531. 

From $100 Per Week 

TAILGATOR EHD2000 

2 Tonne Diesel Self Loading Forklift with 3 Metre 

Lift. H069. TA1060070. 

$29,700 

6 MARIEANNE PLACE, MINCHINBURY, NSW, 2770 

P: (02) 9832 9777 F: (02) 9832 9977 

E: aonefork@lifttrucks.com.au 

KARCHER KM100 

LPG Sweeper. L056. TA1082751. 

$7,700 

TOYOTA 2TG10 

15 Tonne LPG Tow Tug. F040. TA1081388. 

$17,600 

KOMATSU FG25HT-16 

2.5 Tonne LPG Forklift with 4.5 Metre Lift. D018. 

TA1089919. 

$12,100 

USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777 USED FORKLIFT HOTLINE: (02) 9832 9777 

HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES HIRE SALES 

PET-FP-5011641-A


DIESEL ENGINES Pty Ltd 

New and Used Diesel Engines and Generators 

Brett: 0408 781 735 

Sunny: 0418 781 835 

E-mail: sales@diesel-engine.com.au 

Address: 30 Paringa Road, Murarrie QLD 4172 

1 X HARBOUR MASTER 

SCHOTTEL DRIVE 

KUBOTA V2203 

PRESSURE CLEANER 

YOKOHAMA FENDERS 

LARGE NUMBER OF USED 

RUNNING AND PARTS 

GENERATORS IN STOCK 

BRAND NEW WATER PUMP 

ENG, 27HP DIESEL, 3 CYLINDER, 

RADIATOR, MUFFLER & 

STUBSHAFT INCLUDED 


ENGINE, 36HP DIESEL, 4 

CYLINDER, RADIATOR, MUFFLER 

AND STUBSHAFT INCLUDED 

MARINE WINCHES PERKINS 4236 

PRESSURE CLEANER 



CYLINDER, RADIATOR ,MUFFLER 




CYLINDER, RADIATOR, MUFFLER 


CUMMINS 6CTA8.3-C260 

260HP 1135NM @ 1800RPM 

ENGINE - NEW 

CUMMINS KTA19-P600 600HP 

@ 1500RPM ENGINE W/ 

RADIATOR- NEW 

F3L912 BENEI 38HP ENGINE 

- NEW 

CUMMINS 6BT5.9 MARINE 

W/ZF301C 1.1:1 GEARBOX – 

210HP @ 2600RPM 

CUMMINS KT19-M425 NEW/ 

UNUSED KEEL COOLED AND 

HEAT EXCHANGER COOLED 

Detroit 471 Naturally aspirated Ex 

standby generator engine Variable 

revs Low Hour Under 1000 

PET-FP-5012529-CS-339 

BRAND NEW 4” DIESEL, 

POWERED WATER PUMP 

MODEL WP100Y, 4 CYLINDER 

DIESEL, 80M3 /HR 20M HEAD 

C18 CATERPILLARS 

1000 HP 

CUMMINS QSM11 

MARINE X2 

ANCHORS 

250KG – 5T 

WWW.DIESEL-ENGINE.COM.AU


KUBOTA 

BE READY 

During the bushfire season you can rely on 

Kubota diesel generators for back-up power 

Prepare for Bushfires | Lowboy 3 | GL9000 

PET-FP-5188110-CS-310 

+ 2-Pole/Single Phase 

+ Capacity of 8kVA at 3000RPM 

+ Super quiet operation 

Speak to LK Diesel today. 

+ Large capacity fuel tank (28L) 

enables longer continuous 

operation on a single tank 

LKDiesel 

52 Woodlands Drive 

Braeside VIC 3195 

Ph: 03 9588 6900 

Web: lkdiesel.com.au


FW&RBCRIGHTONRURALENGINEERINGPTYLTDtradingas 

Heavy Duty Outdoor Fire Bucket 

If you are looking for a fire bucket... for your 

9 year old daughter's birthday party, you 

should go to Bunnings. 

RURAL ENGINEERING Pty Ltd 

Cnr Nailor & Moama St, Hay, NSW, 2711 

Ph:02 6993 1768 Fax:02 6993 3042 

MOB: 0428 931 768 

 

“NEW”SPIRALWELDSTEELPIPE 

100–1800NBAssortedwallthickness,POA 

 

If you want a 

Fire Bucket / 

Pit which will 

make you 

mates weak 

at the knees, 

have a look 

at this. 

BULK 

ORDERDISCOUNTS 

$900 

“NEW”BLACKPIPE 

4.5mm(114mmOD)2.4&3mlengthsfrom$47+GSTeach 

3.5mm(88.9mmOD)2.4&3mlengthsfrom$40+GSTeach 

PUMPSETS 

4”36”Pumpsets 

Diesel&Electric 

ALLTERRAINCOLESHYDRACRANE 

Goodclearance4WD,mechanically 

sound,goodtyres&roadspeed. 

18mboom,currentlynotregistered. 

$29,000 

ALLENQUIRESph0269931768orcallJasen0428931768 

PET-FP-5176479-CS-289

“Setting the standard for Quality & Value” 

THE INDUSTRY ’S CHOICE! 

CNC 

Machinery 

Metal 

Working 

Sheet Metal 

Fabrication 

Wood 

Working 

Workshop 

& Automotive 

Lifting 

Handling 

Cutting 

Tools 

Established 1930 

Machine Tool 

Accessories 

Measuring 

Equipment 

RDB-050 - Manual Pipe & Tube 

Rotary Draw Bender 

• 3/4" ~ 1-1/2" NB pipe capacity 

• Ø19.05 - Ø63.5mm round tube capacity 

• Bends up to 200° in one shot 

• Anti-springback mechanism 

• Quick-release hook arm 

• 3 bending speeds 

Order Code: B8000 

$ 

2,190 

SBC-990 

Industrial Sandblasting 

Cabinet 

• Heavy-duty steel cabinet 

• 1175 x 885 x 625-845mm 

blast area 

• Includes vacuum system, 

LED light, tempered 

glass screen, gloves, 

gun & ceramic nozzle 

Order Code: S305 

$ 

2,250 

Pro Bender 35T 

Hydraulic Horizontal Bender 

• 35 tonne force capacity 

• 100 x 12mm mild steel capacity 

• 300mm hydraulic ram stroke 

• 3kW/4hp, 415V motor 

• Includes 100mm vee die 

Order Code: P550 

$ 

7,700 

MC-315F CE 

Cold Saw, Includes Stand 

• 100mm round capacity 

• Swivel head ±45º 

• Ø315 x 32mm blade 

• Two blade speeds 25-50rpm 

• Self centring vice 

• 1.1kW/1.5hp, 415V motor 

• Includes coolant system 

& stand 

Order Code: S836 

$ 

6,450 

Made in Taiwan 

BR-16E-36LT 

Bead Roller - Motorised 

• 1.6mm mild steel capacity 

• 914mm throat depth 

• 0 - 100rpm output speed 

• Variable-speed pedal 

• 0.5hp, 240 volt 

• 6.35mm bead die set 

• 1.27mm step roll set 

IW-45M 

Hydraulic Punch & Shear 

• 45 tonne capacity 

• Four work stations 

• Punch: ø22 x 15mm 

• Shear plate: 350 x 8mm 

• Shear angle: 80 x 80 x 8mm 

• 3.75kW/5hp, 415V motor 

Order Code: P170 

$ 

8,990 

PH-19VS 

Reciprocating Hammer 

• 1.6mm mild steel capacity 

• 482mm throat depth 

• Quick-release tooling 

• 4.5 - 14mm stroke adjustment 

• 100 - 1500 blows per minute 

• 0.75kW / 1hp, 240V motor 

INCLUDE 

6 SETS OF 

PUNCH & DIES 

Made in Taiwan 

PB-830A 

Hydraulic NC Panbrake 

• 2500mm x 4mm capacity 

• NC-89 digital single angle 

programmable control 

• Hydraulic clamping & 

bending system 

• 1000mm manual back gauge 

• 5.5kW/7.5hp, 415V motor 

GHD-30V - Industrial 3MT Geared 

Head & Variable Speed Drilling 

Machine 

• 31.5mm drilling capacity 

• 3MT spindle taper 

• Electronic variable speed 

• M20 thread tapping capacity 

• 50-2850rpm speeds 

• 426 x 400mm work table 

• 2.2kW / 3hp, 240V motor 

• Includes coolant system, 

drill chuck & arbor 

Order Code: D176 

$ 

4,090 

AUTOMATIC 

POWER 

FEEDS 

Order Code: S584A 

$ 

17,750 

QUICK ACTION RAPID 

HEAD ADJUSTMENT 


$ 

8,990 


$ 

14,990 

CL-560 

Centre Lathe 

• Ø560 x 2000mm capacity 

• 2 axis digital readout system 

• Quick change toolpost 

• 105mm spindle bore 

• 350mm wide induction 

hardened bed 

• One piece cast iron base 

• 12 speeds, 20-1600rpm 

• 7.5kW / 10hp, 415V motor 

Order Code: L611D 

$ 

21,950 

AUTO LUBRICATION 

PUMP FOR SLIDES 

UNIQUE PROMO CODE 

PE0821 

ONLINE OR INSTORE! 

VIEW AND PURCHASE THESE ITEMS ONLINE AT 

www.machineryhouse.com.au/PE0821 

SYDNEY 

(02) 9890 9111 

1/2 Windsor Rd, 

Northmead 

BRISBANE 

(07) 3715 2200 

625 Boundary Rd, 

Coopers Plains 

MELBOURNE 

(03) 9212 4422 

4 Abbotts Rd, 

Dandenong 

PERTH 

(08) 9373 9999 

11 Valentine St, 

Kewdale 

Specifications & Prices are subject to change without notification. All prices exclude GST and valid until 30-08-21 

07_P&E_020821 

PET-FP-5011534-CS-341


69 LOUDOUN ROAD 

DALBY, QLD 4405 

Yard Phone (07) 4662 0900 

Mobile Phone 0417 617 461 

Fax (07) 4662 0911 

Email: thomastrading@bigpond.com 

www.thomasmanufacturing.com.au 

THOMAS FEED HOPPER 20 CUBIC 

METER 

with 900mm wide, 

feed conveyor 

TH20900. TA122049. 

Quoted to Customer Spec POA 

THOMAS MINI BATCHING 

PLANT 

.. ThomasMiniBP. TA810526. 

Prices start from $90,200 

THOMAS 8 X 4 2 DECK 

SCREEN 

This is a sample of small 

screen boxes that we can 

manufacture on order. 

TH8X42DS. TA250778. 

Quoted to Customer Spec 

POA 

THOMAS RADIAL STACKER 

15m x 900mm wide 

hydraulic drive hydraulic 

raise & lower. TRS15MX900. 

TA114185. 


POA 

THOMAS PRE COATING 

PLANT 

1 x 6 cubic metre Hopper 

with 750 wide Feed 

Conveyor. 12 metre x 600 

wide Radial Stacker. 

Electrical Cabinet on stand, 

fitted with all necessary 

starting equipment. 

THPCP2014. TADPLIn77608. 


POA 

PET-F-GMAI-5059125-A


www.liftek.com.au 

0447 64 33 23 

Griffith, NSW 

E: sales@liftek.com.au 

SNORKEL AND TRAILER PACKAGES Various S1930, 

1930ES Genie 1932 available, new and used trailers 

available, call for more info. S34. TA819706. $13,950 

TOYOTA 32-8FG25 2012, Model container mast 4.5M 3 

stage mast, side shift, only 5000 hours, solid tyres, 

serviced ready for work. S78. TA1081374. $18,800 +GST 

FORWARD BIN TIPPER New and Used available, call for 

more info. S6. TA653780. 

$4,000 + GST 

TOYOTA 7FBE18 ELECTRICS 1.8 ton lift capacity with 3 

stage mast, also available 7FBE20 with container mast, 

call for more info. S21. TA731606. $12,100 

MITSUBISHI 4.5 TON DIESEL 2 stage mast, side shift 

Dual wheels, serviced, new paint. S74. TA1065862. 

$17,500 + GST 

TOYOTA 32-8FG30 3 TON 3 Stage Container Mast, Side 

Shift Solid Tyres. Fully Serviced. S68. TA1001248. 

$16,000 + GST 

TRUCK WASH TWR 35 Brand new, 500ltr tank, 2100mm brush 

width, chemical regulation. Only requires one hydraulic forklift 

function. Will clean a B-Double in 10 minutes. S63. TA988194. 

$9,500 + GST 

MERLO P40.17 2013, 4.0 TON, 17M, 2013 commission, 

only 2900 hours, very clean and tight machine, 

serviced and ready for any work 

S77. TA1080173. $74,800 

JLG E400 ELECTRIC KNUCKLE LIFTS with 

recertification ready for work. Call for more info. S3. 

TA653777. 

$28,900 + GST 

Over 80 Forklifts, scissorlifts, telehandlers to choose from 

PET-FP-5208733-A


SMV 4531 

REACH STACKER, 45,000KG LIFT, SCANIA 

DIESEL, AUTOMATIC TRANSMISSION 

HYSTER H48.00XM-16CH 

40,000KG@1,610MM, CUMMINS QSM11, 

AUTO 4 SPEED 

CLARK 

4.5 TON CAPACITY, LPG GAS, 

CONTAINER FRIENDLY 

HYSTER H50CT 

2,180KG@610MM, LPG, MAZDA 4CYL, 

POWERSHIFT TRANSMISSION 

HYSTER H48.00C-16CH 

40,000KG@1,400MM, DEDICATED 

CONTAINER ATTACHMENT 20’-40’ 

ENFORCER 

16 TON CAPACITY, 

MAST HEIGHT 3.9M 

GENIE GTH 4514 

4,500KG @ 600MM, DIESEL, 

TARE WEIGHT 11,400KG 

HYSTER H16XM-12EC 

9,000KG@1,200MM, CUMMINS QSB 5.9, ZF 

3WG-201, 3 SPEED POWERSHIFT TRANS 

HYSTER H225H 

TYRE HANDLER, PERKINS PHAZER, 

HYSTER 3SP AUTO,4,640KG@2,540MM 

PET-FP-5011670-CS-341


USED CRANES WANTED 

NO 10 YEAR 

NO PROBLEMS 

We purchase Used Cranes 

direct which means we are 

not a Broker to organize a 

deal for you, if you have a 

used crane to off load or 

surplus cranes please call us. 

If you are looking to trade 

in or willing to buy a used 

late model crane we can 

definitely help you in that. 

TRUCK MOUNTED CRANES RANGE: 

TADANO/KATO/P&H /HITACHI 

From 20 Tonne to 100 Tonne 

CASH PAID 

FOR CRANES 

ROUGH TERRAIN CRANES RANGE: 

TADANO/KATO 

From 25 Tonne TO 50 Tonne 

CRAWLER CRANES RANGE: 

P&H/KOBELCO/SUMITOMO/HITACHI 

ALL MODELS ACCEPTED 

ALL TERRRAIN CRANES RANGE: 

FROM 80 TONNE TO 500 TONNE 

All Conditions are considered, 

Damaged Cranes are also 

considered. 

WE COME TO YOU! 

Please send enquiries on 

info@affconstructionequipment.com.au 

PET-HH-5180284-TS-291 

RING FRED KHAN ON 0402 068 319


19-29 Curlew Cresc 

Tamworth NSW 2340 

www.philhuntparts.com.au 

brendan@philhuntparts.com.au 

ALLIS CHALMERS HD11EP Just in for Dismantling, Complete 

Running Machine, Powershift Transmission and Torque Converter, 

Near New Chains and Sprockets, Rear Rippers, Angle Tilt Blade, 

Engine Runs Well, Machine Operates well, All Parts Available. S156. 

TA1076660. 

POA 

ALLIS CHALMERS HD11E Just in for Dismantling, Starts Runs and 

Drives, Rear Rippers, Angle Tilt Blade, Tree Pusher, Good 

Undercarriage, All Parts Available, Phone Brendan 02 6762 4466. 

S160. TA1088611. POA 

PHIL HUNT 

PARTS 

RING ALL HOURS 

NEW AND S/H PARTS 

ALLIS-CHALMERS/HANOMAG/MASSEY 

JOHN DEERE INDUSTRIAL 

PARTS FOR Dozers, Loaders, Drotts, 

Graders, Scrapers 

WRECKING DOZERS 

ALLIS-CHALMERS: Model “M”, HD5, HD6B,E, HD7W, HD7G, 

HDIIB, EP, 

HD15-16, HD16DC, HD16DP, HD19-21, HD41B 

FIAT: 451C, 555, 605, 50CI, 70CI, AT7C, 8B, 

BD10B, FD10E, BD20 

HANOMAG/MASSEY: 2244, 200, 300, 3366, 400, 500, L400C, 

L600C, D600D Super, D700C 

JOHN DEERE : 1010C, 850 

LOADERS 

ALLIS-CHALMERS: TL12D, TL14, TL20, 545, 

605B, 645, 745B,C 

FIAT: FR20B 

LD3, LD5, LD7 & LD9 Scoopmobile 

HANOMAG/MASSEY 22,33C,44, 55, CL55C,66C-D, 77 

GRADERS 

ALLIS-CHALMERS: D, DD, M65, 65B, AD30-40, 45, 145, M100A, 

B, FG95 

DRMCO/CHAMPION 562, 600, 720, 740 

JOHN DEERE 570, 570A, 670A, 770, 770A, 772A 

ALLIS WHEEL TRACTORS 

AC D17, D19, D21, XT190, 7000, 7010, 7020, 7040, 7060, 7080, 

8010, 8050, 8070, 7580, 8550, 440 

ALSO AVAILABLE 

Track Chains, Rollers, Idlers, Sprockets 

Various 4-1 Buckets, POA 

A/H: (02) 6762 4466 

Ph: (02) 6762 4466 

Fax: (02) 6762 4555 

Mobile: 0429 624 144 

ALLIS CHALMERS HD16DP DOZER Just in for Dismantling, 16000H 

Good Running Engine, Bull Tilt Blade, 14 Foot Stick Rake, Good 

Undercarriage, Powershift Transmission, Carco Winch, All Parts 

Available, Phone Brendan 02 6762 4466. S148. TA1064473. POA 

JOHN DEERE 850 DOZER Dozer Just in for Dismantling, Angle Tilt 

Blade with Twin Tilt Cylinders, Milano Ripper Assy, Good 

Undercarriage All Round, 6.619 Engine in Pieces, All Parts Available, 

Phone Brendan 02 6762 4466. S153. TA1068551. 

POA 

Allis Chalmers • Fiat Allis • Hanomag • Massey • JD Industrial 

EMM-HH-5132462-B 

Powered by 



INDUSTRIAL EQUIPMENT MARKETPLACE * 

NEW COMPULOAD 

SCALES & PRINTER FOR 

ON BOARD WEIGHING! 

Made in Australia 

Static weighing 

Dynamic weighing 

Full data management 

Subtract function 

Split load function 

Can be fitted to all types of machines 

Optional USB Downloading (6000 only) 

Large LED backlight display 

Fully automatic 

Simple to use 

Improves profitability 

Fast accurate weighing 

Optional printer available 

1800 285 277 

www.compuload.com.au 

AVAILABLE NATION-WIDE. 

www.TradePlantEquipment.com.au


WELDING EQUIPMENT 

AIRMAN PDS70 

70cfm compressor, reconditioned. 2400 hrs. Diesel engine driven. 

$8,900 

MILLER AIRPAK 

Diesel Driven 

Welder, Generator, 

Compressor. 

$25,750 + GST 

LINCOLN 305D 

2009, Diesel 

Driven Welder, 

Generator. 

300amp DC 

multi-process 

$12,100 

LINCOLN 

VANTAGE 580 

ENGINE WELDER 

Multiple units fully 

tested, With 

warranty. 

$14,500 

LINCOLN 

VANTAGE 575 

Diesel Welder. 

$8,500 inc GST 

AIRMAN PDS125 

Diesel Driven 

Compressor - 

125CFM. 

$12,595 

OUR USED EQUIPMENT IS SOLD WITH A WARRANTY 

07 3375 4146 

1310 Boundary rd WACOL QLD 4076 

36 Carmel st Garbutt QLD 4814 

A.C.N. 086 652 226 

0418 364 166 

Generators New & Used 

CATERPILLAR, CUMMINS, DETROIT, VOLVO, 

LISTER, ENGLISH ELECTRIC DORMAN, DEUTZ, 

PAXSMAN, FORD, RUSTON, TURBINES 

CATERPILLAR C15 Radiators, 220kva radiators brand 

new. Measurements in pictures, reasonable offers welcome. 

S247. TA1064847. $5,000 

CATERPILLAR 3516B 2011, one 2250 kva and one 

2000 kva. Maintained by caterpillar with under 100 hours on 

them. Can be set up in containers or open sets upon 

negotiation. S264. TA1084888. $210,000 

DETROIT DIESEL 6V92T generator 280kva, stamford 

alternator, 544 hours, sound reduced drop over canopy, 

fuel tank base, muffler and circuit breaker. S267. TA1091173. 

$20,000 

KOMATSU 4D105-5 Generator 35kva, 1000hours. 

Fuel tank, circuit breaker and muffler mounted in sound 

reduced 20 ft shipping container. S263. TA1084885. $9,000 

1166 Wellington Road Narre Warren East, Victoria, Australia 3804 

Darren: 0418 364 166 | aaamachinery@yahoo.com.au 

CATERPILLAR 3412, 750KVA 1997, ex-standby 

set with 283 hours, set is like new and comes with muffler, 

fuel tank and sound reduced drop over canopy. S253. 

TA1069043. 

$75,000 

MTU MTU6R1600 Generator 305kva with only 18 

hours, in new condition, fuel tank base, muffler and circuit 

breaker included. Set has been load tested and is ready to 

use. S268. TA1091186. $35,000 

WE BUY GENERATORS 

Scott: 0400 658 496 | scott@stmachinery.com.au 

PET-HH-5011243-A


Colin: 0411 644 477 

28 Goodman Place, 

Murarrie, QLD, 4172 

GENIE GS3268RT 

4WD diesel scissor lift - good all 

round condition, still working in 

rental fleet only 2 left. S1. 

TA1054069. 

$20,000 + GST 

SNAPPY HEAVY DUTY 

Scaffold. S2. TA1054072. 

$550 + GST 

SNAPPY MOBILE 

Mobile scaffolds for sale, 

supplied to your required 

height. S3. TA1054075. 

POA 

SNORKEL ATB60-CU 

4WD- diesel 18m boom lift, 

very robust reliable 

machine. Very versatile. S4. 

TA1054078. 

$20,500 + GST 

SNORKEL PRO66 RDZ 

4WD diesel 20m boom lift - 

good safe working order. 

Still working in rental fleet. 

S6. TA1054082. 

$24,500 + GST 

SNORKEL SRT2770 RT 

8.5m diesel scissor lift - 

very reliable, great value. 

S8. TA1054084. 

$15,500 + GST 

SNORKEL TB50 RTZ 

4WD diesel 15m boom lift - 

popular size, very reliable 

model. S9. TA1054085. 

$17,500 + GST 


4WD diesel boom lift - good 

reliable unit. Still working in 

rental fleet. S10. TA1054088. 

$16,500 + GST 


RDZ-4WD diesel boom lift 

(2) - good reliable machine. 


S11. TA1054089. 

$18,500 + GST 

SNORKEL TB60 RDZ 

4WD diesel boom lift (3) in 

good safe working order. 


S12. TA1054090. 

$22,500 + GST 

DOW-FP-5211710-A 

www.hireach.com.au


tradeplantequipment.com.au/sell 1300 362 272 

CATERPILLAR 992C 1985. Wrecking for parts, .. QLD. 

DIY645033. 07 4950 5307. 

POA 

SAND DRYER Gas powered, on stand. Good order. 40T/HR, 

7.5m x 1,600mm, working when pulled down, .. QLD. 

DIY496592. 07 4950 5307. 0427 775 466. $35,000 plus GST 

REDUCTION BOXES BREAKER DRIVERS fully rebuilt. 2 x 

available - Phone 0427 775 466, .. QLD. DIY1046194. 

07 4950 5307. $5,000 + GST Each 

BALL MILL 30ft x 6ft, .. QLD. DIY540209. 07 4950 5307. 

0427 775 466. $45,000 PLUS GST 

HOTWASH HW1400G DS Rotary Parts Washer 3 phase 

machine, HW1400G. QLD. DIY1091573. 0418 985 675. 

$32,000 inc GST 

ALFA LAVAL A15 BFM 1986, gasketed plate heat 

exchanger, 98192774. NSW. DIY1092611. 0415 820 702. 

$49,500 

SELL YOUR 

TRUCK 

GRACO XM PFP 

Pump and container. Located in Western Sydney, .. 

NSW. DIY960730. 

0412 249 163. 

$60,500 

VISIT TRADETRUCKS.COM.AU/SELL 

OR CALL 1300 362 272


tradeplantequipment.com.au/sell 1300 362 272 

HUNT TN-AR 3000 gas water boiler and boiler shed with 

flue and dedicated switchboard, 2430. NSW. DIY1092612. 

0415 820 702. $114,950 

SYMONS 7FT CONCAVE ., .. QLD. DIY540214. 07 4950 5307. 

0427 775 466. $7,000 PLUS GST 

SELL YOUR TRUCK 


OR CALL 1300 362 272 

MINYU MS3624 JAW CRUSHER 36 x 24, 16 new plates & 

4 cheek plates. Phone 0427 775 466, .. QLD. DIY1046184. 

07 4950 5307. $40,000 + GST 

CATERPILLAR D6 TRACK ROLLERS believed to fit a D6 Cat 

dozer, set of 6. Please call 0427 775 466, .. QLD. DIY857141. 

07 4950 5307. $1,200 + GST 

SYMONS 7FT MANTLES X2, .. QLD. DIY540212. 07 4950 5307. 

0427 775 466. $13,200 

FEEDER BELT 30X4 FT HYDRAULIC DRIVE Phone 0427 

775 466, .. QLD. DIY1046189. 07 4950 5307. $10,000 + GST 

OMNICELL MULTI-MED CE 2011, Webster pill packing 

machine, Dell main brain, compressor with pneumatic 

solenoid valves and ancillary components. 

Complete machine ready for use. Located in pharmacy as 

is., 2011. WA. DIY1092470. 0402 078 477. $5,000 

SELL YOUR TRUCK 


OR CALL 1300 362 272 

KUE KEN 48 X 36 JAW CRUSHER on stand with feeder & 

scalper, refurbished. 0427 775 466, .. QLD. DIY957170. 

07 4950 5307. $500,000 + GST 

RYCO SAM WAY 2019, Hydraulic Hose Crimping Machine, 

00000123. SA. DIY1093865. 0437 388 195. $7,900 

TYRE HANDLER KOMATSU WA600-1 Plus all Controls. 

Phone 0427 775 466, .. QLD. DIY1046192. 07 4950 5307. 

$10,000 + GST 

MINYU MS4230 JAW CRUSHER good order, 4 spare jaw 

plates & 2 cheek plates, .. QLD. DIY1046187. 07 4950 5307. 

$55,000 = $50,000 + GST 

EL-JAY ROLLERCONE 54 CRUSHER with stand & electric 

motor & starter, .. QLD. DIY1046181. 07 4950 5307. 

$71,500 = $65,000 + GST 

WABCO 50B Dump truck x 2. Parts only. Good 1710 

Cummins motors x 2. 0427 775 466, .. QLD. DIY496585. 

07 4950 5307. $20,000 plus GST

Get 13 issues of 

FOR 

JUST $ 

79 .99! 

You’ll receive 

13 issues of 

Farms & Farm Machinery magazine 

Weekly e-newsletter 

FREE delivery to your mailbox 

How? 

Visit magshop.com.au/ffm 

or call 136 116 

Already a subscriber? 

Simply call 136 116 to extend your 

subscription with this offer and save 

Subscribe today, it’s easy!


tradefarmmachinery.com.au/sell 1300 362 272 

Powered by 

To select your advertising package, go to 

tradefarmmachinery.com.au/sell 

Each package includes 1 print issue in Farms & Farm 

Machinery and until sold on tradefarmmachinery.com.au 

ADVERTISEMENT DEADLINE 

Issue: 402 Deadline: Fri 20/08/2021 5pm On Sale: Thu 09/09/2021 

Issue: 403 Deadline: Fri 17/09/2021 5pm On Sale: Thu 07/10/2021 

Value Pack 

Premium Pack 

Grand Pack 

Jumbo Pack 

Monster Pack 

Mega Pack 

$ 

35 

Online Value 

✔Standard ad 

✔Ad listed until sold 

Print Value 

✔1/36 of a page 

✔1 issue 

✔Newsprint Colour 

$ 

55 

Online Value 

✔Premium online ad 


Print Value 


✔1 issue 

✔Gloss Colour 

$ 

85 

Online Value 



Print Value 


✔1 issue 

✔Newsprint Colour 

$ 

130 

Online Value 



Print Value 


✔1 issue 


$ 

280 

Online Value 



Print Value 


✔1 issue 


$ 

750 

Online Value 



Print Value 


✔1 issue 






PREMIUM 

NEWSPRINT 

MEGA 

GLOSS 

MAKE AND MODEL 9 metre cut, quick release, 

folding wings, V8 twin turbo, REG. STATE. 

DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 

GRAND 

GLOSS 



DIYXXXXXX. PH 

$PRICE 



DIYXXXXXX. PH 

$PRICE 

SELL YOUR 

FARM 

MACHINERY 

MAKE AND MODEL 9 metre 

cut, quick release, folding 

wings, V8 twin turbo, REG. 

STATE. DIYXXXXXX. PH 

$PRICE 





$PRICE 



DIYXXXXXX. PH 

$PRICE 





$PRICE 



DIYXXXXXX. PH 

$PRICE 

VISIT THE WEBSITE 

OR CALL 1300 362 272 





$PRICE 





$PRICE 

VALUE 

NEWSPRINT 





$PRICE 

MAKE AND MODEL 

9 metre cut, quick release, folding wings, V8 twin turbo, REG. STATE. DIYXXXXXX. Phone 

$PRICE 


9 metre cut, quick release, 

folding wings, V8 twin turbo, 

REG. STATE. DIYXXXXXX. Phone 

$PRICE 

MONSTER 

GLOSS 





$PRICE 

JUMBO 

GLOSS 





$PRICE 

1 item per ad space regardless of ad size 

The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Prime Creative Media advises 

buyers beware of negotiating by email only; of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas. Buyers should contact Prime Creative Media customer services on 1300 362 

272 if they suspect an advertisement may be fraudulent. In the event that a buyer suffers financial loss as a result of responding to a private advertisement in this publication Prime Creative Media shall not be held liable or responsible. 

1300 362 272 privateads@bauertrader.com.au 

tradefarmmachinery.com.au/sell

Tractors, farm machinery & materials handling equipment for sale 

>> INSIDE 

A Load to Like 

Strautmann Giga-Vitesse CFS 3602 

Great and Small 

EuroTier prize winnners 

FFM 393 front cover.indd 1 

Now offered as a ROPS model, 

the Kubota M5-1 tractor series 

offers higher horsepower at lower 

engine speeds >> Page 14 

100-200hp Tractors 

18 PAGE SPECIAL FEATURE 

Issue 393 > $7.95 > On sale 31/12/20 

$63,800 $180,000 $43,450 NEG 

$297,000 

2017 Hustler SF1750. 17.5 cube, side feed silage 

wagon, many options • VIC 0437 136 209 draper front, comb trailer • NSW 0429 938 300 Perkins turbo 105hp • TAS 0439 304 542 Leith trailer, Exc cond • QLD 0409 250 888 

’08 CLAAS 580R Combine. Honeybee flex 1993 Delvano STM. Self-prop sprayer, 4WD, ’11 CASE IH 7120. 45ft 2152 Macdon, 4 axle 

items for sale 

Trucks, utes and 

33,625+ in print & online 5,850+ 4x4s now for sale! 

11/12/2020 1:25:11 PM 

4/3/20, 2:48 pm 

Page 1 of 1 


SEARCH 

4/3/20, 2:48 pm 

Page 1 of 1 




magazine 

NEXT 

SEARCH 



list map 


AUSTRALIA 



magazine 


$19,750 



list map 

GET ALERTS 


$19,750 






includes gst 







includes gst 

EMAIL SELLER 


KUBOTA 8540 

! CALL 08 7007 6847 

$22,000 

SAVE ITEM 

EMAIL SELLER 

KUBOTA 8540 

$22,000 









! CALL 03 8547 8644 






EMAIL SELLER 



! CALL 03 8547 8644 

FEL 28HP 

$21,450 

SAVE ITEM 

EMAIL SELLER 


FEL 28HP 

$21,450 







coupled with a higher specification shuttle shift transmission. With forward and 




! CALL 02 8315 0078 






coupled with a higher specification EMAIL shuttle SELLER 

shift transmission. With forward and 




! CALL 02 8315 0078 

$42,995 

SAVE ITEM 

EMAIL SELLER 


$42,995 




New Kioti RX8030 front wheel assist tractor 12F x12R shuttle transmission 

linkage and remotes, Loader with 4in1 bucket Cheap power handy tractor 

$42995 Special 1 unit only 

Wooroolin, QLD 




New Kioti RX8030 front wheel assist tractor 12F x12R shuttle transmission 

linkage and remotes, Loader with 4in1 bucket Cheap power handy tractor 

$42995 Special 1 unit only EMAIL SELLER 

Wooroolin, QLD 

2016 CASE IH MAXXUM 125 

! CALL 07 3073 8164 

$138,000 

SAVE ITEM 

EMAIL SELLER 

2016 CASE IH MAXXUM 125 

$138,000 




Usage Hours: 515 

CASE MAXXUM 125 4WD 127 HP 6 CYLINDER AIR CONDITIONED WITH 

SUSPENSION CABN 16 X 16 SEMI POWERSHIFT TRANS PLUS MANY 

EXTRAS ,FRONT END LOADER 4IN1 WITH 8FT HYD ANGLE TILT BLADE 

HYD POST HOLE DIGGER 2... 

North St Marys, NSW 


! CALL 02 6171 3260 



Usage Hours: 515 SAVE ITEM 

CASE MAXXUM 125 4WD 127 HP 6 CYLINDER AIR CONDITIONED WITH 

SUSPENSION CABN 16 X 16 SEMI POWERSHIFT TRANS PLUS MANY 

EXTRAS ,FRONT END LOADER EMAIL 4IN1 WITH SELLER 8FT HYD ANGLE TILT BLADE 

HYD POST HOLE DIGGER 2... 

North St Marys, NSW 

AGMAX SL210HD HEAVY DUTY SLASHER 

! CALL 02 6171 3260 

7' - 75HP GEARBOX 

$5,690 

SAVE ITEM 

EMAIL SELLER 

AGMAX SL210HD HEAVY DUTY SLASHER 

7' - 75HP GEARBOX 

$5,690 

Tractors / Tractor Attachments 

RefCode: TA930462 

AGMAX 7' heavy duty slasher. Suits tractors 85-120hp, 2 year warranty. Clear 

dense bush blocks and slash through heavy grass or woody vegetation. Built 

tough for Australian conditions. 

Thomastown, VIC 

! CALL 03 9998 4680 

Tractors / Tractor Attachments 

RefCode: TA930462 SAVE ITEM 

AGMAX 7' heavy duty slasher. Suits tractors 85-120hp, 2 year warranty. Clear 

dense bush blocks and slash through heavy grass or woody vegetation. Built 

tough for Australian conditions. EMAIL SELLER 

Thomastown, VIC 

MERLO P 27.6 

! CALL 03 9998 4680 

$89,900 

SAVE ITEM 

EMAIL SELLER 

MERLO P 27.6 

$89,900 


RefCode: DIY939915 Class: 0-40hp Drive Type: 4WD 

Number Cylinders/cc: 3,300/4 Rated Engine Power - hp: 74 

Usage Hours: 0 

Compact Italian Made Telehandler - BOOM REACH OF 6M - Hydrostatic 

Transmission. Fuel Efficient & Fast - 40 km/h - Largest Cab on a Compact 

Telehandler. - 3 Cly. Turbo Engine. 

Issue 401 index 

Agco Australia Limited (VIC)............................................................. 124 

All Diesels (QLD).................................................................................. 73 

Brisbane Mini Excavators (QLD)......................................................... 25 

BYPY Transmissions (VIC).................................................................... 51 

Intersales Temora (NSW).............................................................80 

Lyndoch Motors (SA)...................................................................79 

Rocky River Ag Services (SA)......................................................78 

TTMI (VIC).....................................................................................77 

Cobram Farm Equipment (VIC)........................................................... 79 

Daken ASV (NSW)............................................................................ 5, 34 

Dieci Australia (NSW)..............................................................COVER, 26 

Echuca Rural (VIC)............................................................................... 82 

EL-Gra Engineering (NSW).................................................................. 45 

FAE Australia Pacific Pty Ltd (VIC ......................................................... 9 

Farmgard Pty Ltd (VIC)........................................................................ 31 

G & J East Kadina (SA)......................................................................... 70 

Gendore Tractor & Machinery (VIC).................................................... 57 

Geronimo Farm Equipment Pty Ltd (NSW)......................................... 21 

Goldacres Holdings Pty Ltd (VIC)........................................................ 12 

Grainrite (VIC)...................................................................................... 39 

Greg Allan Farm Machinery (VIC)........................................................ 19 

Hicks Machinery (VIC)......................................................................... 81 

Inlon Pty Ltd (NSW).............................................................................. 11 

Jadan Enterprises (NSW)..................................................................... 41 

JNR Engineering (VIC).......................................................................... 23 

Korea Trade Commission (KOTRA Sydney) (NSW)............................. 17 

Loxton Engineering Pty Ltd (SA)......................................................... 81 

Makin Traks Construction Equipment Solutions (QLD)...................... 35 

Massaro Motors (VIC).......................................................................... 74 

Muller Fabrications (QLD)................................................................... 49 

PFG Australia Pty Ltd (VIC).................................................................... 2 

Pickman Equipment (VIC)................................................................... 67 

Pivot Irrigation Australia Pty Ltd (SA).................................................. 81 

Poole & Jackson Pty Ltd (VIC)............................................................. 79 

Powerace Pty Ltd (WA)....................................................................... 59 

Private Advertising Coupon................................................ 121 

Rebel Equipment (NSW)...................................................................... 59 

Robinsons of Bookham (NSW)............................................................ 72 

Rocca Industries (QLD)........................................................................ 53 

Rural Wrecking Co. (NSW)................................................................... 75 

Sammut Agricultural Machinery Pty Ltd (NSW)............................... 123 

Smallaire (VIC)..................................................................................... 82 

UD Trucks (QLD)................................................................................... 55 

UHI Machinery (NSW).......................................................................... 63 

Veldonas (VIC)..................................................................................... 68 

W & P Pumps (VIC).............................................................................. 47 

WA Farmers (WA)................................................................................ 37 

Wrights Tractor Sales & Service (SA).................................................. 71 

Issue 341 index 

A One Lift Truck Services (NSW) ................................................. 105 

AAA Machinery (VIC)......................................................................... 116 

Brisbane Welder Repairs & Rentals (QLD) ................................. 116 

AFF Equipment Pty Ltd (VIC)............................................................. 114 

Allis Chalmers Australia (NSW)......................................................... 115 

Atlas Weighing (NSW)........................................................................ 115 

Diesel Engines Pty Ltd (QLD)............................................................. 107 

Forklift Traders (NSW)........................................................................ 103 

Formidable Forklifts Pty ltd (VIC)...................................................... 102 

FW & RB Crighton Pty Ltd (NSW)...................................................... 109 

Hare & Forbes (SYDNEY) (NSW)........................................................ 110 

Hi-Reach Rentals Australia Pty Ltd (QLD)......................................... 117 

Liftek Australia (NSW)........................................................................ 112 

LK Diesel Service Pty Ltd (VIC).......................................................... 108 

Phil Hunt Parts (NSW)........................................................................ 115 

PR Power Pty Ltd (WA)...................................................................... 106 

Price & Speed P/L (NSW)................................................................... 113 

Skyreach Pty Ltd (QLD)...................................................................... 104 

Thomas Manufacturing (QLD) .................................................... 111 

Powered by 



FARM MACHINERY MARKETPLACE * 

BUY 

More than 40,000 tractors, spreaders, harvesters, hay 

tools, feeders, sprayers, trailers, and attachments, and 

other parts and accessories currently listed for sale 

SELL 

Unlimited stock listings on 

TradeFarmMachinery.com.au for 

just $360 per month 

* Based on stock items for sale as at March 2020 

TERMS AND CONDITIONS 


Acceptance of all advertising is subject to review and approval by management, the publisher reserves the right to edit, revise or reject any advertisements for any reason. The Publisher’s liability for damages resulting from errors in any advertising that it publishes or from its failure to publish any 

advertisement that it has agreed to publish shall be limited to the amount it actually received in consideration for its agreement to publish the advertisements in question. The Publisher shall not be responsible for any special, incidental or consequential damages suffered by any party resulting from its errors 

and/or omissions. The advertiser accepts all liability for the content of all advertising supplied by it and agrees to defend, indemnify and hold harmless the Publisher from any and all claims. All photographs become the property of Prime Creative Media Pty Ltd. For dealer and commercial advertising these 

terms and conditions should be read in conjunction with the terms, conditions, warranties and indemnities published in our dealer and commercial rate cards. 

The publisher accepts no responsibility or liability for any losses incurred by a buyer responding to an advertisement in this magazine. Buyers are solely responsible for their own negotiations and transactions with advertisers. Prime Creative Media Pty Ltd advises buyers beware of negotiating by email only; 

of paying deposits to private advertisers for goods unseen; of transferring money (for example via Western Union) interstate or overseas. Buyers should contact Prime Creative Media customer services on 1300 362 272 if they suspect an advertisement may be fraudulent. In the event that a buyer suffers 

financial loss as a result of responding to a private advertisement in this publication Prime Creative Media Ltd (The Publisher) shall not be held liable or responsible. 

,!3BD0A6-aaejdg!:k;L 

OPTIONS 

galore 

DEALER ADVERTISING 1300 362 355 n PRIVATE ADVERTISING 1300 362 272

SAMMUT 

AGRICULTURAL MACHINERY 

All the latest gear and greatest innovations 

Phone: (02) 4579 6511 Mobile: 0414 423 680 

Fax: (02) 4579 6522 Email: sales@sammut.com.au 

67 Joshua Road, Freemans Reach NSW 2756 

TOSCANO MULCHER 

H/D construction 

Double or single side linkage 

Optional hydraulic side shift 

Sizes from 1.5 to 4mtr 

S359. TA1025453. 

Price from $5,000 + GST 

SAMMUT TRUCK TRAYS 

H/D Australian made 

3mm or 5mm floor 

Custom build 

Chassis modifications 

New and used trucks available. S360. TA1025472. 

PRICE FROM $8,000 + GST 

SAMMUT HARDOX TIPPER BODIES 

H/D build. One piece sides, 2 way gate 

Optional well hoist or twin under body. Optional drop sides 

Custom build. Colour of choice 

Sand blasted and finished in 2-pac 

New and Used trucks available. S362. TA1025485. 

From $25,000 + GST 

UNITED IMPLEMENTS BOX GRADER 

Made in USA 

Heavy duty build 

Hydraulic lift wheels 

Hydraulic angle adjustment 

1800mm to 3600mm. S363. TA1025493. 


SAMMUT GEARMASTER TURF MOWER 


Full gear drive, Stainless deck 

75 HP gearboxes, 3pl or trailing 

Sizes from 1.5 mtr to 12mtr. S364. TA1025498. 


SAMMUT MILL MUD SPREADERS 


Full hydraulic drive, Single or 3 row 

Front feed, Single or double axle 

Optional rear spinners 

Sizes from 8m3 to 30m3. S365. TA1025500. 


SAMMUT ORCHARD / VINEYARD SPREADER 

H/D Australian build 

Front or rear delivery. Sizes from 2m3 to 18m3 

Optional telescopic conveyor, Optional end rotor or end spinner 

Custom built to suit your requirements. S366. TA1025523. 


SAMMUT SPREADERS 


Full hydraulic drive 

We can custom build. Optional front feed 

Optional side delivery. Chain or belt floor 

Sizes from 2m3 to 30 m3. S367. TA1025524. 


FIMAKS VERTICAL FEED MIXERS 

Hardened bin and floor. H/D Comer Italian gearboxes 

Sizes from 3m3 to 30m3. Scales, In cab controls 

Optional folding conveyor with optional length 

Reduction box. S371. TA1025537. 

From $25,000 + GST 

TOSCANO STONE BURIER 

Extra heavy duty 

Hydraulic lift roller 

Gear drive 

Anti-pan blades 

2200mm to 3200mm. S369. TA1025532. 


TOSCANO SPEED DISC 

Heavy duty 

Hydraulic lift crumble roller 

560mm discs 

3pl and trailing 

2.5 mtr to 6mtr (trailing ). S368. TA1025525. 


For more info please visit us at www.sammut.com.au 

FIMAKS MUCK SPREADERS 

From 5 tonne to 30 tonne 

Heavy Duty conveyor chain, Slurry door, In cab controls 

Twin vertical beaters with bottom spinner 

Suitable for all your hard to spread products etc 

Wet cow manure, mulch, green waste etc. S373. TA1025543. 

From $25,000 + GST 

FFM-FP-5190448-A

0% 

FINANCE * 

ZERO IN ON A GREAT 

TRACTOR AT A 

GREAT INTEREST RATE. 

MF GLOBAL SERIES 

MF 4700, MF 5700 AND MF 6700 I 74 – 132 HP 

Get it done with a super versatile Massey Ferguson Global Series tractor at a super low 0% interest rate.* 

These range of tractors are purpose built in the latest state-of-the-art facilities, combining the very best of today’s 

technologies with comfort, simplicity, reliability and quality. With up to 5,200 kg 3-point lift capacity, reliable AGCO 

Power engines and high capacity hydraulics with up to 98 l/min flow, now is the time to secure a tractor that is out 

of this world with the MF Global Series. 

CONTACT YOUR LOCAL MASSEY FERGUSON DEALER TODAY 

* Finance available with an interest rate of 0% p.a. available on a Chattel Mortgage agreement minimum 30% cash deposit, the GST component repaid in the fourth month and monthly 

repayments in arrears over a 36 months term. Offer ends September 30th, 2021, while stocks last to approved purchasers for chattel mortgage finance who use the equipment for business 

purposes only. Subject to terms and conditions and credit approval by AGCO Finance Pty Ltd, ABN number 42 107 653 878. Fees and charges may apply. 

MASSEYFERGUSON.COM.AU | FREECALL 1800 802 914 

A world of experience. Working with you.

Farms & Farm Machinery #401

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?