Katalog_REOTRON_EN
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical data<br />
<strong>REOTRON</strong> MDZ 2000<br />
<strong>REOTRON</strong> MDZ 2000<br />
Type <strong>REOTRON</strong> MDZ 2000<br />
Mains supply<br />
Firing pulse steps 6<br />
Pulse voltage<br />
Pulse current<br />
Transformer groups<br />
Voltage set point<br />
Current set point<br />
3x 400 V +6%-10% 50/60 Hz<br />
ca. 12 V<br />
500 mA<br />
Dd0, Yy0, Dz0, Dy5, Yd5, Yz5,Dd6, Yy6, Dz6, Dy11,<br />
Yd11, Yz11 and primary regulator<br />
0...10 V, DC / 0...20 mA / 4...20 mA / Poti 10 kΩ<br />
0...10 V, DC / 0...20 mA / 4...20 mA / Poti 10 kΩ<br />
Voltage actual value input +/- 0...40 V (0...10 V, DC optionally)<br />
Current actual value input<br />
Up/Down ramp integrator<br />
Voltage regulation<br />
Current regulation<br />
Input Impedance voltage actual value Input<br />
Input Impedance current actual value Input<br />
Control signal – pulse enable<br />
Control signal – set point inhibit<br />
Over temperature input switch<br />
Fault relay<br />
Status relay<br />
Operating ambient temperature<br />
Dimensions (WxHxD)<br />
+/- 0…100 mV (0...10 V, DC optionally)<br />
0,1...10 Sec adjustable<br />
PI - regulator adjustable percentage of P<br />
PI - regulator adjustable percentage of P<br />
56 kΩ<br />
5,6 Ω<br />
12...24 V, DC / 2,5 mA<br />
12...24 V, DC / 2,5 mA<br />
Schalter 1 mA<br />
1 changeover contact load 250 V, 1 A<br />
1 changeover contact load 250 V, 1 A<br />
0...45 ° C<br />
140x290x160 mm<br />
26
Change language