Katalog_Schutzarten_EN
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Useful facts about REOhm resistors<br />
Useful facts about<br />
REOhm resistors<br />
If installed on a non or poor heat-conducting material, the<br />
performance must be checked due to the reduced heat<br />
dissipation. When mounting vertically, it is essential to ensure<br />
that the connections or terminals are located on the underside<br />
of the resistor. An installation which has the connections on<br />
the uppermost side is not allowed! If several resistors are<br />
mounted one above the other, mutual interference must be<br />
taken into account. Here the compliance with the above<br />
mentioned ambient conditions must be observed and the<br />
Ideal<br />
Ideal<br />
installation conditions checked on site. When mounted directly<br />
on a heat sink or cooling surface, Ideal the continuous power of the<br />
resistor can be increased or the surface temperature reduced.<br />
Depending on the type and size of the cooling surface / heat<br />
sink, the output can be increased by a factor of 1.5 - 4.<br />
However, this must be checked Ideal in individual cases, whereby<br />
the specified ambient conditions still apply.<br />
Correct<br />
Bottom connection<br />
Attention!<br />
Incorrect<br />
Connection on top<br />
Attention!<br />
Heat sink<br />
Attention!<br />
Attention!<br />
Mutual interference<br />
Power increase by factor 1.5 - 4 possible<br />
Attention!<br />
Heat sink<br />
Heat sink<br />
Heat sink<br />
16
Change language