ALL ABOUT TEMP-PLATE® - Paul Mueller Company

8
TYPE 8 MUELLER TEMP-PLATE
Double- or Single-Embossed
Type 8 Temp-Plate design may be used for steam,
refrigerants, or liquids. It is ideal if requirement is
for a high liquid flow rate with minimal pressure
drop. Inlet and outlet connections are identically
sized for versatility.
Return
(MPT)
A
Return
(MPT)
*
*
*
*
3 1/2"
STANDARD DESIGN - TYPE 8D (AS SHOWN BOTH VIEWS)
OPTIONAL DESIGNS - TYPE 8SR OR 8SL (FITTINGS DEPICTED CORRECTLY IN END VIEWS ONLY)
*
3/4"
Supply (MPT)
B
Note: Consult factory for connection
sizes if length B exceeds 143".
3 1/2"
Return
(MPT)
OPTIONAL DESIGNS - TYPE 8DCR OR 8SCR (AS SHOWN) OR
TYPE 8DCL OR 8SCL (OPPOSITE HAND)
Supply
(MPT)
OPTIONAL DESIGNS - TYPE 8DMR OR 8SMR (AS SHOWN) OR
TYPE 8DML OR 8SML (OPPOSITE HAND)
*Dimension will be held to a practical minimum unless otherwise requested.
Notes: 1. Dimensions, arrangement, and fittings may be changed to satisfy practically all requirements.
2. Drawings are for illustrations, they do not represent actual inflation dimensions.
*
*
*
*
*
8D
Supply
(FPT)
PIPE OR COUPLING SIZES
Temp-Plate Size Supply Return
A Up to 17" 1" 3 /4"
B All Lengths
A 18" thru 25" 1" 3 /4"
B Thru 47" Long
A 18" thru 25" 11 /2" 3 /4"
B Over 47" Long
A 26" thru 47" 2" 1"
B All Lengths
Supply (MPT) elbow
* *
8SL 8SR
Return (MPT) elbow
8DCR 8SCR
8DMR 8SMR