TristarPMA - Tristar Photo
TristarPMA - Tristar Photo
TristarPMA - Tristar Photo
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Tristar</strong> PMA/CES 2012 iPhonPod<br />
What is iPhonPod? It is a support system for the Apple iPhone 4 and 4S. The iPhone is more than a cell phone, it is even more than a DV camera as<br />
it has two lenses, front and back. This feature enables user to shoot HD picture or movie on either side. The iPhonPod has a removable LED light, this<br />
compact LED light is powerful, can fill in shadow or even use as main light in total darkness. The solid bracket holds the iPhone firmly, also, it is the<br />
heart of the system as all the accessories are mounted around it. The mini tripod is stored inside the hand grip. When snapping picture or video, the<br />
hand grip provides a firm grip of the phone rather than using 4 fingers from both hands. With the use of extension handle, in video mode, user can<br />
shoot self-portrait, raise up to shoot the other side of the wall, or over the peoples’ head.<br />
iPhonPod contains:<br />
1. Phone bracket<br />
2. Mini tripod<br />
3. Handle<br />
4. LED light<br />
5. Bounce reflector<br />
6. Extension handle<br />
The extension handle can raise up the camera 18” more, so you can<br />
shoot what other people can’t do.<br />
iPhonPod, Product No. 30-800B (black)<br />
30-800W(white)<br />
5<br />
4<br />
Email: apvphoto@aol.com<br />
The best thing happens to cell phone is iPhone*<br />
The best thing happens to iPhone is iPhonPod<br />
3<br />
2<br />
1<br />
6<br />
With two speakers, it becomes a portable<br />
entertaiment unit.<br />
(speakers are not included)<br />
LED lgiht can tilt 90<br />
or 180 degrees. Use<br />
bounce board to<br />
prevent glare to<br />
the eyes.<br />
The extension handle also can work horizontally. When use the back<br />
lens, combines with bounce board over the tilted LED light, user can<br />
shoot video with user appears in screen along with background, this is<br />
unique as you can stay in the picture and the background is moving<br />
when you walk, it looks as if a cameraman shoots the video of you while<br />
you are walking. The bounce light illuminates the user without causing<br />
blindness to eyes.<br />
*iPhone is register trade mark of Apple computer Inc. Cuppertino CA USA. iPhonPod and iPhonGrip are not associated with their products
<strong>Tristar</strong><br />
email: apvphoto@aol.com<br />
PMA/CES 2012 iPhonGrip and mini LED light<br />
iPhonGrip HPL-5 mini LED video light<br />
iPhonGrip<br />
iPhonGrip<br />
Model No. 30-801B<br />
(black)<br />
iPhonPods Specification:<br />
Bracket to hold phone: Aluminum extrusion<br />
Mini tripod: 4” tall<br />
Removable handle: 5” with female tripod screw<br />
LED light: 5600K, 200 lux/m. with diffuser lid removed<br />
Tilting angle: 180 degrees, 45d. interval, with click stop<br />
Battery: 6 x AAA alkaline or rechargable NiMh<br />
Battery life: approximately 1 hour.<br />
(batteries are not included)<br />
iPhonGrip specification:<br />
Polycarbonate casing to hold the phone with LED light<br />
permanently attached to it. LED light has female tripod<br />
screw to fit onto camera tripod. Grip handle is<br />
removable for storage.<br />
LED light specification is same as the iPhonPod<br />
iPhonGrip<br />
Model No. 30-801W<br />
(white)<br />
The iPhonGrip contains a LED light, a removable handle and a case to<br />
have the iPhone to fit into. The main purpose of this product is to let user<br />
to have a firm, steady grip on the phone. As without this support, user<br />
has to use 4 fingers from both hands to shoot picture or video, which is<br />
not easy to grip on the phone, and may drop the phone if not managing<br />
well. The LED light and the case is one unit, permanently attached, and<br />
the hand grip is removable for convenient storage. LED light can provide<br />
the light for video shoot when shooting in darkness, or pilot light for still<br />
picture when using phone’s built-in flash. The LED light has a standard<br />
1/4” female thread.<br />
HPL-5 LED attachment light<br />
Batteries Lid<br />
Shoe mount<br />
Auto on/off switch<br />
Hook & Loop tape<br />
The HPL-5 is a compact LED video light, it is designed for the present<br />
day’s V-DSLR camera with video capability. As most user use TTL flash<br />
for still imaging, but when switching to video mode, there is no constant<br />
light. HPL-5 can be attached on top of TTL flash, and flip it down when it<br />
is not in use. When constant light is needed for video, just flip it up, the<br />
light will be on automatically. It can be used on still imaging to assist for<br />
focusing in total darkness.<br />
Specification:<br />
Size: 3.5x1.5x1.1inch<br />
LED: 12W<br />
Lumen: 200/yd.<br />
Weight:3 oz.<br />
Batteries: 6 x 1.5V alkaline or 6 x 1.2 rechargeable NiMh<br />
Battery life: approximately 1 hour
<strong>Tristar</strong> PMA/CES 2012 CamPorta<br />
Steady video with CamPorta, completely hand free !!!<br />
Model 30-380<br />
Shooting up Shooting down<br />
CamPorta 30-380 is very versatile, it is fully<br />
adjustable to cope with any optical apparatus like<br />
Binoculars, Telescope, Digital Video camera and V-<br />
DSLR camera.<br />
The unit has built-in tilthead, quick mount with tripod<br />
screw. The Harmness is fully adjustable to fit human<br />
body comfortably and firmly. Although it is not a Gyro<br />
type stabilizing device, it does turn out steady image<br />
in video mode on most cameras. Most importantly,<br />
user’s hand is free.<br />
Telescopic columns<br />
Adjustable waist<br />
strap<br />
Quick zoom ring<br />
Thick shoulder pads<br />
Tilt-head<br />
Quick, and alignment plate<br />
Shooting straight<br />
Folds up to single unit, flat, comes with carrybag.<br />
The CamPorta is a support unit for today’s V-DSLR<br />
camera with Video capability. As the camera with lens,<br />
normally is heavy, the way of the camera is mostly<br />
designed for snap shots, when on Video mode, it is<br />
not comfortable to hold-on, and heavy to use<br />
continuously. This harmness support holds the camera<br />
and becomes part of human body when putting it on.<br />
User has both hands free, and the weight of any<br />
apparatus put on it becomes weight-less as it merges<br />
to the body.<br />
Press buttom to change angle, telescopic column<br />
Total weight: 2 kgs
<strong>Tristar</strong> PMA/CES 2012<br />
All aluminum construction closeup<br />
camera rail with built- in arms<br />
for TTL flash units. This is the setup<br />
for micro photography of small<br />
things in our world. The special<br />
twin arms are fully adjustable.<br />
Each has a spring loaded<br />
ballhead , equipped with lockable<br />
flash cold shoe mount on it. One<br />
twin TTL cable is included.<br />
TTL flash lighting for micro digital imaging<br />
made possible by our XYZ-01 camera rail<br />
When both of automatic TTL flash<br />
are mounted on the twin TTL cord,<br />
which couples the camera’s hot<br />
shoe, a fully automatic exposure on<br />
flash and camera can be achieved.<br />
Twin flash allows more lighting effect<br />
on the object. (TTL cable available<br />
for Canon, Panasonic, Pentax,<br />
Olympus, Pentax, Sony.<br />
(Nikon is not available)<br />
XYZ-01 Camera rail allows<br />
the camera to flip both<br />
horizontal and vertical<br />
format. The dovetail<br />
design on rail ensures<br />
secured and smooth slide.<br />
As the product name<br />
implies, the camera can<br />
move X and Y axis when<br />
camera is on horizontal<br />
X axis<br />
format. When camera is in<br />
vertical format, camera can move X and Z axis only. As micro photography requires only minor adjustment on all axis, this design<br />
makes slight changes of camera position more easily. Most of the experient photographers know, moving the tripod slightly to<br />
compose the image, is difficult as the whole things would be heavy.The two arms are designed like human arms, can position both<br />
TTL flashes at any angle or position, this flexibility allows photographer to cope with difficult lighting problem on small objects. The<br />
unit has standard female 1/4” tripod mount at unit’s bottom.<br />
Z axis<br />
Comes with one twin TTL cable<br />
Canon E-ttLII<br />
Panasonic TTL<br />
Pentex P-TTL<br />
Olympus<br />
Sony<br />
(Nikon is not available)<br />
All metal construction<br />
Lockable cold shoe mount Spring loaded ball head<br />
X axis travel, 100mm<br />
Y axis travel, 100mm<br />
Z travel, 40mm<br />
Y axis<br />
XYZ-01<br />
X axis<br />
Arm<br />
Max. 300mm<br />
Min. 80mm<br />
Quick release mount with<br />
camera aligment plate<br />
Female 1/4”-20 tripod thread<br />
Safety screws at both ends,<br />
stop quick mount falling out
<strong>Tristar</strong> PMA/CES 2012<br />
Mounted on light stand as reflector<br />
Rest on floor, low angle reflection<br />
Hand held for mobility<br />
Model #50-1000 and #50-1000BDK<br />
Superb clamp<br />
Sample of overhead set up with barndoor,<br />
superb clamp shown is not included<br />
Pull and separate all 4 spring loaded tubings<br />
Folds up easily for storage<br />
Collapsible Reflector/Diffuser panel<br />
50-1000 contains 1m x1m frame, 3 x fabric material,<br />
has built-in swivel mount, 1 x removable<br />
handle rod and a tote bag.<br />
50-1000BDK is same as 50-1000, except it<br />
comes with additional pair of aluminum, snapon<br />
barndoor, which is useful to avoid glare or<br />
light spillage.<br />
Sample set up for diffused light<br />
This ingenous design of reflector/diffuser frame is<br />
rigidly built, able to mount on any light stand with<br />
5/8” spigot. The frame can be flipped almost 350<br />
degrees and be locked at any angle. The unit<br />
comes with 3 fabric material, Silver, Gold and<br />
Transucent. The Silver and Gold material has a<br />
white surface on other side. User can use this product<br />
as diffuser, or even to emulate light from soft<br />
box. Any make of electronic flash, tungsten light,<br />
fluorescent lamp or LED, can work without problem,<br />
no need for speed ring as required by softbox.<br />
This makes it very versatile.<br />
A. 1 pair snap-on aluminum barndoor to avoid light<br />
spill age<br />
B. Aluminum frame held together by pre-loaded<br />
rubber spring<br />
C. Handle/floor supporting rod<br />
B.<br />
C.<br />
A.
<strong>Tristar</strong> PMA/CES 2012 New booms and FloMonoPod<br />
110-06B Miniboom<br />
Max. L. 6ft<br />
Max. load: 6 lbs<br />
Fits on 5/8” stand spigot<br />
Tubing dia. 5/8 and 3/4”<br />
Counter weight: 5lbs<br />
30-308 FloMonoPod<br />
Boom, Arm, Clamp and FloMonoPod<br />
The self-leveling FloMonoPod is a partial<br />
monopod and partial FloPod. This support is<br />
designed for V-DSLR cameras. When in Video<br />
mode, it can be used like monopod when user is<br />
not moving, but when user needs to walk or run,<br />
the camera will be steady and always in horizontal<br />
plane when it is off the ground. The FloMonoPod<br />
has a gimbal built under the camera, so it floats<br />
when lifting it up off the ground. The weight of<br />
the pod acts as counter balancing device to keep<br />
the camera in horizontal position and floats when<br />
user is in motion. It has quick release mount,<br />
sliding rail to balance the camera in center of<br />
gravity. The FloMonoPod has a fluid effect leveling<br />
pad at the tip of pole, so it acts like fluid head<br />
when panning the camera.<br />
Tubing diameter: 1, 7/8, 3/4, 5/8” diameter<br />
Material: aluminum tubing<br />
Camera head: yes, with x and y adjustment<br />
Two handles: one for monopod function and one<br />
for FloPod function.<br />
Max. load for camera: 6 lbs.<br />
Max. height: 5.5ft<br />
Net weight: 3 lbs<br />
110-05B SpaceArm<br />
The SpacArm<br />
is an uniquely<br />
designed arm.<br />
It is so versatile<br />
and rigid. Easy<br />
push button locks<br />
positively, fits on<br />
5/8” stand spigot. Its<br />
arm configurates like<br />
the arm of space shuttle.<br />
It can be separated into<br />
two pieces if two lights<br />
are needed. Comes with<br />
one SpaceClamp.<br />
Can break into two pieces<br />
5/8” spigots<br />
<strong>Photo</strong> of<br />
SpaceArm in<br />
two arms config.<br />
Max. weight is 5 lbs ea.<br />
with sand bag to counter<br />
balance.<br />
Push button locks<br />
Built-in 5/8” spigot<br />
110-021<br />
SpaceClamp, clamps 20-100mm dia. pole<br />
All metal construction
<strong>Tristar</strong> PMA/CES 2012 Still/Video camera bracket<br />
V-DSLR camera bracket model #BK-9<br />
BK-9, this is a professional grade camera bracket for serious photo<br />
enthusiasts and professionals. It has ample space to put many accessories<br />
on it. Electronic flash, LED panel, microphone all can put onto the crossbar<br />
together, and it is most suitable for today’s V-DSLR cameras with HD<br />
movie, still imaging capabilities.<br />
Unlike DV movie camera, holding the V-DSLR camera for video mode is<br />
not as comfortable as the DV camera. This bracket allows user to hold<br />
with both hands, so it is more steady , less fatigue, hence better imaging,<br />
and more comfortable.<br />
The top crossbar sits onto hand grip’s 5/8” spigot, and is removable,<br />
comes with one cold shoemount and one 1/4 screw mount. . Some of<br />
the accessories can even slide into the crossbar directly as it has a channel<br />
all across with size of standard female flash shoe.<br />
The ergonomic designed , rubberized handle fits the left hand perfectly<br />
and soft to grip onto, and there is a receptacle to use optional shutter<br />
release to plug into the camera’s remote control port. (our code no. DSR/<br />
05, and adapter cables, represented by suffix XX first 2 letter of camera<br />
brand.)<br />
The lower bar to hold the camera, is tripod mountable, the whole unit<br />
can fit easily into camera bag when disassembled.<br />
Bracket itself weights only 1kg.<br />
Optional accessories<br />
ZR-01 Quick zoom ring<br />
adjustable for lens barrel diameter<br />
from 2” to 3”<br />
DSR/05-XX Shutter release with dedicated camera<br />
remote control port<br />
C<br />
5/8”<br />
spigot<br />
E. HPL-4<br />
LED video light<br />
A<br />
G.<br />
BK-9E<br />
Female tripod mount<br />
B<br />
A. BK-9 camera bracket<br />
B. Crossbar, part of BK-9, with one<br />
cold shoe mt and one 1/4” screw mt.<br />
C. BK-9E, optional extension arm, Max. 14”<br />
D. BK-9R. optional camera rail with quick<br />
mount, alighment plate kit. This accessory<br />
is to balance camera when using long lens.<br />
D<br />
F. Camera Mic.<br />
H.<br />
(E,F,G,H, in picture are not included)<br />
BK-9R<br />
8”<br />
10”
<strong>Tristar</strong> PMA/CES 2012 High Power Studio LED light<br />
HPL-1500 monoblock LED light<br />
The new era of constant studio light is no longer a power<br />
hunger, boiling hot light source to make photograph or<br />
video. This new high power (only 100W) LED light delivers<br />
over 10000 lux of light in a compact package. The light is<br />
cool, long lasting, flicker free. The light emits out equivalent<br />
to a 800W halogen bulb yet it consumes only 1/8 of the<br />
elecitricity, a really enviromental frendly product. It is<br />
maintenance free, long lasting, rates for 10,000 hours.<br />
The HPL-1500 is an universal light, it works on 110V to<br />
230V, covers the entire world. Unlike the other LED panel,<br />
which has many dots of LED and causes step shadows,<br />
should not be desirable for portrait or studio work. A cleverly<br />
designed glass diffuser turns the dotted light to a light pattern<br />
similiar to a single light bulb, and intensifies the light by<br />
means of a parabolic reflector. It accepts all our Imager<br />
accessories. The glass diffuser is removable for point light<br />
souce effect.<br />
Technical specification<br />
Type: Semiconductor LED<br />
Color Temperature: 5600K<br />
Lux: 11000/m<br />
Dimmer: 3 steps<br />
Power consumption: 120W<br />
Voltage range: 110 to 230V<br />
Cooling fan: Yes, enclosed<br />
Noise level: Undetectable<br />
Life span: 10,000 hours<br />
Casing: Metal, ABS plastic<br />
Power cord: 3.5m, 3 wire<br />
Size: 11x5x5” without glass diffuser<br />
Weight: 3.5 lbs
<strong>Tristar</strong> PMA/CES 2012 MiniStudio Flash kit<br />
Micro processor control digital electronic flash kit for DSLR cameras<br />
close barndoors to protect flash tube hold-all compact, soft carry case<br />
adjustable barndoors to shield light<br />
optional diffuser 60-120JD<br />
Kit models:<br />
*60-PC120J/K2UM/120 or 220<br />
Contains 2 x flash heads, 2 x stands, 2 x silver umbrellas,<br />
1x 10ft pc sync cable with PC plug.<br />
*60-PC120J/K2BX/120 or 220<br />
Same as above, but with 2 x 16x16” softboxes<br />
60-RF120J/K2UM/120 or 220<br />
Contains 2 x flash heads, 2 x stands, 2 x silver umbrellas,<br />
1 x radio transmitter, 16 channels.<br />
60-RF120J/K2BX/120 or 220<br />
Same as above, but with 2 x 16x16” softboxes<br />
Above kits all come with soft carry case<br />
Radio trigger specification:<br />
Range: 60ft<br />
Frequency: 433Mz.<br />
Channels: 16, 0-9, ABCDEF<br />
Shutter speed sync: 1/60 sec.<br />
Battery: 12V 23A alkaline (included)<br />
Slave sensor specification:<br />
Range: 30ft<br />
Flash sync mode: 3 modes, Red, instant sync,<br />
Green, 2 preflash sync, Orange, 3 preflash sync.<br />
*this model does not has RFchannel digital readout.<br />
All models PC sync are electronic camera safe.<br />
Low Profile transmitter<br />
with digital readout for<br />
channel setting. Comes<br />
with Model:<br />
60-RF100J/K2UM and<br />
60-RF100J/K2BX<br />
The simple, easy to control back panel enables<br />
user to choose complex function on flash settings,<br />
thanks for the micro processor inside flash.<br />
RF trigger<br />
mode LED<br />
Pilot On/Off<br />
Flash/Pilot<br />
power knob<br />
Radio<br />
channel<br />
digital<br />
readout<br />
Channel<br />
button<br />
Ready<br />
light<br />
Fuse<br />
holder<br />
RF Version<br />
Parabolic<br />
reflector<br />
Rachet<br />
locking<br />
mechanism<br />
5/8” stand<br />
spigot mt.<br />
Sync mode<br />
button<br />
Built-in barndoors<br />
Light<br />
Sensor<br />
Test<br />
button<br />
3.5mm<br />
sync<br />
cable<br />
outlet<br />
PC<br />
sync<br />
LED<br />
Pre flash sync<br />
LED, red,green,<br />
orange indicates<br />
preflash in 1,2,<br />
or 3 modes<br />
User replaceable flash tube and halogen pilot<br />
light, protected by built-in barndoors when closed<br />
and put in carry case for traveling.<br />
Umbrella<br />
receptacle<br />
75W<br />
pilot light<br />
10,000<br />
cycles<br />
flash<br />
tube<br />
easy to mount on 40x40cm softbox<br />
silver photo umbrella, 24” diameter<br />
Techincal specification<br />
Power: 120Joules per head<br />
Color Temp. 5600K<br />
Flash duration: 1/1000 sec.<br />
Recycle: 3 seconds<br />
Flash/Pilot light adjustment: Stepless<br />
Pilot Light: plug-in, 75W halogen<br />
Flash tube: plug-in, 10,000 cycle,<br />
Casing: all metal, built-in barndoors<br />
Stand mount: 5/8” stand spigot<br />
Power cable: 12ft, 3 wire, w/in-line switch<br />
Fuse: 6A/120V, or 3A/220V<br />
Stand: Aluminum, 4 sections, 2m tall<br />
Flash casing size: 3.8” dia.x7” L.<br />
Each flash head weight: 3.2 lbs<br />
2 light kit weight: 14.5 lbs<br />
Carry bag size:7x7x25”