Wireless Triggers - Tristar Photo

Infrared Triggering devices, DSLR accessories
IRX-01
Infrared filter to convert camera’s built-in flash to a flash trigger. Eliminates sync cord.
fits on any flash with the supplied
velcro kit. Precut different sizes
to fit.
FS-01
Flash sensor,with hot shoe mount and
contact. Range 30ft.
IRX-12
Infrared flash trigger, fires any studio
flash unit that has built-in photo
sensors. effective range in-door
is 100ft. Comes wtih pc cord
and hot shoe mount.
Use two AA batteries,
(not included)
IRX-C2
Infrared remote to trigger camera film or digital
camera shutter release, on some models, it can
control the zoom-in and out.
Range: 10ft.
3V lithium cell battery
inculded.
Size: 5x28x90mm
DSB-02K
Digital camera brack with DS-1 and
F18 flash unit and BK-2 bracket kit
DS-1 for shoe mount portable flash units. It can be mounted on tripod and it is tiltable.
DS-2 for shoe mount portable flash units and studio
flash units that have 6.3mm sync receptacle.
DS-3 for P C sync cord and studio flash units that have 6.3mm sync receptacle.
Supplied with velcro
kit to attach unit to flash casing.
DS-1K, 2K,or 3K comes with IRX-01 infrared filter, and is designed to block the light
from the on board camera flash but still, can trigger the flash. Attached with velcro, fits
different sizes flash lenses.
DS-1
DS-2
DS-3
ADR-NI-CA
Lens adapter ring for Nikon SLR lens to Canon digital camera
body. Camera’s auto mode is not applicable when ring is used.
LC-49,LC-52,LC-55, LC-58, lC-62
LC-67, LC-72, LC-77
Lens shade, rotatable. available size:
for 49, 52, 55, 58, 62,67, 72, 77 diameter.
EYS-01, EYS-02, EYS-03
Rubber eye cup for Canon and Nikon digital camera
view finder,
ANFI-01
90 degree angle view finder for Digital SLR cameras,
comes with 3 camera finder adapters. Rotable
for horizontal or vertical view.
TRISTAR
FD-380
Portable Flash diffuser for Canon 380EX,Nikon SB-24,25,26,600,800, Metz 40MZ2 Sigma
EF-500DGSVPFO, EF-500DGST, Minolta 5200i, 5400xi/hs
FD-430
Flash diffuser for Canon 430EX
FD-540
Flash diffuser for Canon 540EZ, 550EX
FD-580
Flash diffuser for Canon 580EX
XYR-1
X and Y axis rail for accurate positioning of camera. Designed for fine tune of camera
position on both X and Y axis, especially for microp or close-up photography. Can be
mounted on standard tripod head.
STN (for hot-shoe mount), and STN/S (for Sony hot-shoe mount)
Non isolated PC sync tap for digital camera. Unit provides PC sync outlet to use sync
cord to fire electronic flash.
STP (for hot-shoe mount), and STP/S (for Sony hot-shoe mount)
Protected PC sync tap for digital camera. It has isolated circuity to trigger electronic
flash unit that may have high voltage tripping coil, which may damage the electronic or
digital cameras. Unit requires 1, 12V battery.(included)
STN
STN/S
Tristar Photo Industrial Company, 11 Lung Tak St. 24/F. #7 Tsuen Wan Hongkong SAR PRC
Ph. 2408 6079 Fax. +852 2409 9408 Email Triphoto@biznetvigator.net www. tristar-photo.com
STP
STP/S

Copy stand and Magic square
Magic square daylight kit
50-401DLK contains one
85W 5200K large fluorescent
bulb that emits
5500 lumens of light.
The magic square
has no rods to assemble,
just unfold it,
and attach the diffuser,
clip on the back
mounting plate for
lamp socket. That is it.
The magic square has recessed rim
to avoid light spillage. Size of
diffuser is 16x16” and the weight
is less than 3 lbs without bulb and
socket.
The magic square is ideal to
use with our MHP-800 Metal
halide lamp set up. It emits over
12000 lumens of daylight, and stay
cool that you can shoot ice-cream
without melting it. Contains 1 magic square, 1 mounting base, 1 85W 5200K bulb, and
one socket with 12ft power cable. (Do not use it with halogen bulb)
50-401DLK1 same as 50-401DLK, but comes with sturdy aluminum stand.
50-401DLK2 Same as 50-401DLK1, but it is a two ligh kit, everything is double, comes
with carton carry case.
Econ copy stand
TRISTAR
70-101 Basic copy stand with two lights. it has upright 60cm column, Wooden base board
size is 36x40cm. Cranked camera mount, is tiltable, with quick release plate. Comes with
2 adjustable ceramic lamp holders and reflectors. Ideal for letter size document. 2, 250W
3200K halogen bulbs are included.
Deluxe copy stand
70-102 Professional model. It has slang column, all metal camera head with quick mount
plate, clanking mechanism. Maximum height is 72cm. Comes with two ceramic lamp
holders, reflectors and 2, 250W 3200K halogen bulbs. Optional two additional lamp holders
for even lighting. It has Metal base boad, magnetic strip paper holder for thin, flat
document. Base board size is 45x60cm
70-102A set of 2 lamp sockets with reflectors, 2, 250W halogen bulbs.
Tristar Photo Industrial Company, 11 Lung Tak St. 24/F. #7 Tsuen Wan Hongkong SAR PRC
Ph. 2408 6079 Fax. +852 2409 9408 Email Triphoto@biznetvigator.net www. tristar-photo.com
70-101
70-102