siemens (1)

Keys on the Operator Panel
Start the converter with parameterized ramp-up time
Bring the converter to a standstill with parameterized ramp
down rate. Press twice and the converter coasts to a
standstill.
Changes the direction of rotation
Motor starts and rotates at the preset jog frequency. Motor
rotates as long as the button remains pressed
Parameter access. Is used to select the parameter number
and to accept the value
Increase parameter number or value
Decrease parameter number or value
This key has a series of functions:
- Roll function to display the 5 most important values
- More exact setting of parameters, e.g. decimal places
- Jump to Parameter 0000. The display shows r0000
SITRAIN
TIA-PRO1 / Introduction TIA Portal Page 44 Siemens AG © 2011