Half Corker Specs_Jun22
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Half</strong> <strong>Corker</strong><br />
Product Specifications<br />
FRONT VIEW<br />
SIDE VIEW<br />
SIZE<br />
DIAMETRE:<br />
DEPTH:<br />
WEIGHT:<br />
600MM<br />
15MM<br />
3.5KG<br />
211MM<br />
MATERIALS / FINISH<br />
BODY:<br />
SUSTAINABLY SOURCED CORK<br />
TOP REAR<br />
HANGING RAILS<br />
FRAME:<br />
4MM ALUMINIUM / POWDER COAT<br />
COLOUR OPTIONS<br />
FRAME:<br />
MATT WHITE<br />
MATT BLACK<br />
Maintenance<br />
Simply wipe down the frame of <strong>Corker</strong> with<br />
a soft rag as required. Ensure wall fixings are<br />
secure. If in doubt contact an installer or<br />
handy-man in your local area.<br />
BODY<br />
SUSTAINABLY<br />
SOURCED<br />
CORK<br />
BOTTOM REAR<br />
HANGING RAILS<br />
600MM<br />
139MM 250MM<br />
600MM<br />
15MM
<strong>Half</strong> <strong>Corker</strong><br />
Included<br />
Installation<br />
1<br />
CUT THE HANGING TEMPLATE<br />
OUT OF THE BOX YOUR PRODUCT<br />
ARRIVED IN.<br />
2<br />
PLACE THE TEMPLATE ON THE WALL WHERE YOU<br />
WOULD LIKE TO HANG YOUR CORKER. ENSURE CENTRE<br />
LINE IS VERTICAL WITH A SPIRIT LEVEL.<br />
1X HALF CORKER<br />
CORKBOARD<br />
2X HANGING<br />
RAIL<br />
4X 8G X 40MM<br />
TYPE17<br />
COUNTERSUNK<br />
TIMBER SCREWS<br />
4X 8G X 40MM<br />
COUNTERSUNK<br />
SELF-DRILLING<br />
SCREWS<br />
3<br />
MARK ON THE WALL POINTS A, B, C, AND D.<br />
REMOVE THE TEMPLATE, DRILL AND PLUG<br />
THE 4X MARKED POINTS.<br />
4<br />
LOCATE 2X BATONS AND SCREW THEM ONTO THE WALL<br />
USING THE 4X SCREWS PROVIDED. HANG THE CORKER<br />
ONTO THE SPLIT-BATONS ATTACHED TO THE WALL.<br />
A<br />
B<br />
A<br />
B<br />
4X 4.5G X50MM<br />
NYLON WALL<br />
PLUGS<br />
4X GYPROCK WALL<br />
MATE WALL PLUGS<br />
C<br />
D<br />
C<br />
D
Change language