Panels & Furniture Asia July/August 2022

V
BIFA WOOD
I E
T N A M
BIFA WOOD
VIETNAM 2022
VENEER SPLICER:
INNOVATOR
MACHINERY
Innovator Machinery’s splicers use
pressurised and heating mechanical
structures, and thermosetting glue is used to
bond veneer edges with no visible joint lines.
In particular, the longitudinal veneer splicer
with an integrated gluing system, VeneerPlus
G1, removes the pre-gluing process. After the
veneers are fed into VeneerPlus G1 and aligned
by the synchronised infeed rollers, the veneers
are conveyed to the singular gluing unit to glue
the edges, then transported to the heating
section for glue curing. The veneer gluing and
splicing processes are accomplished within a
single machine.
Different from traditional “zig-zag” stitchers,
Innovator’s butt-jointed longitudinal veneer
splicers are ideal for processing high-quality
glue-spliced veneer faces. The main advantage
of butt-jointed splicers over “zig-zags” is
to avoid thread marking and the
opening gap of jointing line onto the veneer
surface after veneers are pressed onto the
board.
“Zig-zags” use glue thread to put two veneers
together, but in actuality, the two veneers are
not jointed, just connected by glue thread. This
results in an opening gap after being heated
by the hot press. Additionally, users might still
BOOTH NUMBER: B2082
VeneerPlus G1
see the jointing line after
sanding. For buttjoint
splicer,
the machine
applies glue
on the veneer
edges and sticks them
together without
overlap; as such, there
will be minimal gap and visible
line after pressing onto the board
and sanding.
Further features of the VeneerPlus G1 include:
complying with European safety standards;
has a cooling system for prolonging glue-pot
life; allows easy adjustment and quick access
of the integrated gluing system; has motorised
driven infeed discs instead of traditional rollers
for smoother infeed; and transporting chains
of engineering plastics for reducing heat on
veneers.
BOOTH NUMBER: C1009
Five-axis machining centre
TENONER, MORTISER
AND FIVE-AXIS
MACHINING CENTRE:
NEW MAS WOODWORKING
New MAS Woodworking Machinery & Equipment is a
manufacturer of various kinds of woodworking machinery,
covering 260 acres of land and plants. Since 1994, the company
has produced more than 200,000 units of moulding machines and
saws of various kinds. The company has also established a longterm
collaboration platform with technology universities, working
and researching on issues from field testing of new products to
operator and safety training programmes.
NC double-sided four-spindle tenoner
The team consists of more than 30 technicians and engineers
with experience both in machine design and wood processing,
with over 400 skilled workers and approximately 500 set quality
manufacturing equipment, including 30 advanced numeric
control (NC) metal and sheet metal processing machines like laser
cutting, vertical and horizontal machining center. At BIFA Wood
Vietnam 2022, it is demonstrating a range of equipment, including
a NC double-sided four spindle tenoner, a NC mortising machine,
and a five-axis machining centre.
62 Panels & Furniture Asia | July / August 2022