REGO Catalog english

www.rego.de
Detector- / Cassette
Holder
Many different cassette sizes and formats, and one slot for the
grid wall tripod – this can be a challenge for the everyday use.
REGO has got the perfect solution for you:
The mounted grid does not fit to your necessary specifications
for your desired screening: Choose the REGO cassette holder
– available in in different variations for installing them onto the
side rails of the grid wall tripod or for wall mount.
To install these holders, lateral rails on both sides are necessary
– You don`t have these? U-shaped-holders are available as
custom made product to be mounted to the tripod and enabling
the installation on the cassette holder.
R-Holder, B/W-Holders:
Cassette Holder Type R Cassette Holder Type B
Cassette Holder Type W
Material
Aluminium anodized
Aluminium anodized
Aluminium anodized
Features
X-Rays without moving
grid, high stability
Low weight
(appr. 2,5 kg)
X-Rays without moving
grid, high stability
Low weight
(appr. 2,5 kg)
X-Rays without moving
grid, high stability
Low weight
(appr. 2,5 kg)
Fixing
Hanging into the side rails
of the grid wall tripod;
suitable for all standard
front plates with profile
sliding mechanism,
DIN-profile slides
Hanging into the side rails
of the grid wall tripod;
suitable for all standard
front plates with profile
sliding mechanism,
DIN-profile slides
Wall mounting
Cassette sizes
13 x 18 cm – 35 x 43 cm
Up to 30 x 90 cm
Up to 30 x 120 cm
18 x 24 cm – 35 x 43 cm
60 – 120 cm length
(for large sized cassettes)
18 x 24 cm – 35 x 43 cm
60 – 120 cm length
(for large sized cassettes)
210 cm cm (length of bar)
for full body X-Rays
Special features
Height adjustable (5 cm
spaces by snap in pins)
Height adjustable (5 cm
spaces by snap in pins)
Cassette Holder Type B - for Cassettes
with imaging plate and grid
18x24 up to 35x124 cm
Art.-No.: 102120
79