REGO Catalog english

www.rego.de
Smit-Grids/
Smit-Bucky Grids
Lightweight, portable, high X-Ray reluctancy
and as low as possible absorption of primary
radiation – at the same time the patient is
exposed to a low as possible radiation dose.
The reason for the high quality is the highly
transparent interspacer, which enables a
thickness of the grid up to 5 mm. Thus, a
higher quality picture is possible.
The Smit-grids are available as mobile version
as well as mounted onto the Bucky table
(Smit-Bucky-grid).
Material
Thickness of grid
Mounting
Lines /cm / Ratio*
Sizes
Highly transparent interspacer
Up to 5 mm
Mobile or on Bucky table
* Ständer für bis zu 6 Filter auf Wunsch erhältlich
Smit-grid: 44/8, 44/10, 44/12, 60/10
Smit-Bucky-grid: 36/8; 36/10, 36/12, 44/8, 44/10, 44/12, 60/10, 60/13
Smit-grid: all sizes from 13 x 18 cm up to 40 x 40 cm
Smit-Bucky grid: 48 x 43,8 cm
REGO Special Grids
The REGO Special Grids are applicable in
many ways as they can be put in the X-Ray
cassettes and also be placed loosely onto
the X-Ray cassette. Additionally, they can be
built into the slip-on-grid.
Material
Thickness of grids
Ratio: lines/cm
Sizes
Special sizes / specific
number of lines
Aluminium/lead lamellae with changeable configuration inside of the grid
Up to 3 mm
Optionally:
Ratio 6: 60 lines/cm; 70 lines/cm; 80 lines/cm
Ratio 8: 40 lines/cm; 60 lines/cm; 70 lines/cm; 80 lines/cm
Ratio 10: 40 lines/cm; 60 lines/cm; 70 lines/cm; 80 lines/cm
Ratio 12: 40 lines/cm; 60 lines/cm; 70 lines/cm; 80 lines/cm
Available in all standard sizes:
40 lines/cm: from 13 x 18 cm up to 40 x 40 cm
60 lines/cm: from 18 x 24 cm up to 40 x 40 cm
On request
87