RevisionC-Developmentofconceptofcompressorforcommercialvehicle

2.5.1.3 Photograph of product
Description of product with important features of it.
Mostly this photograph should be of all the views top, bottom, sides and special fitments,
name plate and stickers.
2.5.1.4 Contents of Report
Mention in brief about what this report covers this may vary sometimes but it must contain
the following things: -
● Mounting details and sectional
drawing,
● Product application details,
● Performance parameters for
measurement,
● Performance test under
different condition,
● Product function and working
cycles,
● Cross-sectional details of the
product,
● Bill of Materials,
● Design calculation,
● Functional analysis,
● Diagnosis of design;
● Good features,
● Potential trouble,
● Possible improvements,
● Features, which can be
adapted from this design,
● Conclusion and Further
course of action,
2.5.1.5 Mounting details and sectional drawing
This may be available in catalogues or search on websites. Provide maximum technical
details available about the product including port details.
Following information to be covered
● Name plate details,
● Mounting port details with
thread size and depth,
● Mounting flange details- Hole
size/pitch/Contact area,
●
●
Weight,
Overall envelope dimensions
(Length X breadth X height)
2.5.1.6 Product function details: -
The function of the product in the brake system to be covered. This should also include
the technical parameter of the product before and after in the circuit. And how this function can
affect the other circuit parts.
2.5.1.7 Performance parameters: -
Performance parameters Specified in Product GA drawing to be covered.
Or can be taken from test results.
Page 35 of 93