26.12.2012 Views

Industrial Hydraulics

Industrial Hydraulics

Industrial Hydraulics

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Electronic components<br />

Racks and card holders<br />

116 <strong>Industrial</strong> <strong>Hydraulics</strong> Bosch Rexroth AG<br />

< 19" racks for accommodating electronic assemblies of Euro-card format<br />

< Universal housing for 2 or 4 printed circuit boards of Euro-card format DIN 41 612<br />

– External connection using screw assemblies<br />

– Contact load of connections up to 4 A<br />

– Slots that are not required can be covered by dummy plates<br />

< Card holders for the installation of electronic assemblies of Euro-card format (single and<br />

double)<br />

< Separate power supply<br />

Detailed information: Technical data<br />

1987761327 Chapter 2 Universal housing<br />

Type of electronics<br />

DIN 41 612<br />

RE 29768 VT 19101 Rack 1 x 3HE for cards 100 x 160 mm with or without connector backpanel<br />

RE 29768 VT 19102 Rack 2 x 3HE for cards 100 x 160 mm with or without connector backpanel<br />

RE 29768 VT 19103 Rack 3 x 3HE for cards 100 x 160 mm with or without connector backpanel<br />

RE 29768 VT 19110 Bus rack 3HE for cards 100 x 160 mm or 100 x 220 mm<br />

RE 30105 VT 10812 Connection adapter with 32-, 48- or 64-pin socket connector for VT 19101 to<br />

VT 19103 without connector backpanel<br />

RE 29928 VT 3002 Open card holder with 32-, 48- or 64-pin socket connector<br />

RE 30103 VT 12302 Enclosed card holder with 64-pin socket connector<br />

Power supply and stabilizing units<br />

< Smoothed or regulated output voltages<br />

< Stabilization of smoothed voltages<br />

< Power supply unit can be snapped onto PS02<br />

< Power supply unit with card holder<br />

< Mains filter module<br />

Detailed information: Technical data<br />

1987761327 Chapter 3 Power supply unit, can be<br />

snapped onto PS02<br />

Power supply unit with card<br />

holder<br />

Input voltage: 115/230 VAC<br />

Output voltage: +24 VDC; 4 A<br />

Input voltage: 115/230 VAC<br />

Output voltage: +24 VDC; 3 A<br />

Mains filter module Input voltage: 24 VDC<br />

Type of electronics<br />

Output voltage: +24 VDC; 2.5 A<br />

RE 29929 VT-NE30 Input voltage: 115/230 VAC<br />

Output voltage: + 26 VDC/2.5 A<br />

RE 29929 VT-NE31 Input voltage: 115/230 VAC<br />

Output voltage: ± 24 VDC/2 x 0.25 A<br />

RE 29929 VT-NE 32 Input voltage: 115/230 VAC<br />

Output voltage: + 25 VDC/2.5 A and + 24 VDC/1 A (regulated)<br />

RE 29891 VT-NE 40 Input voltage: 115/230 VAC<br />

Output voltage: + 30 to 34 VDC/8 A (adjustable)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!