METALLOGRAPHY'010 - TUKE
METALLOGRAPHY'010 - TUKE
METALLOGRAPHY'010 - TUKE
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FINAL ANNOUNCEMENT & PROGRAMME<br />
14 th International Symposium on Metallography<br />
M E T A L L O G R A P H Y ’ 0 1 0<br />
28 th – 30 th APRIL 2010<br />
ACADEMIA Congress Centre<br />
Stará Lesná, High Tatra Mountains<br />
SLOVAK REPUBLIC<br />
Met 2010 nanovo.indd 1 4/22/10 8:38 AM
W E L C O M E T O M E T A L L O G R A P H Y ´ 0 1 0<br />
Met 2010 nanovo.indd 2 4/22/10 8:38 AM
It is our pleasure to welcome you to the 14 th International Symposium on Metallography ME-<br />
TALLOGRAPHY´010, to be held from 28-30 April 2010 in the beautiful surroundings of the High Tatra<br />
Mountains in the Slovak Republic.<br />
We welcome all participants to this traditional event where materials specialists from various parts<br />
of the world have been meeting and exchanging their latest insights at three-yearly intervals since<br />
1969. The original group of narrowly-specialized metallographers who based their research on light<br />
microscopical and macroscopical observation has grown in line with the development of instrument<br />
technology into a community of materials specialists making use of a wide range of increasingly modern<br />
equipment, even though the subject of their research still remains material, and most frequently<br />
metal.<br />
Let us hope and strive to ensure that, just as the use of the wheel has not disappeared from<br />
human civilization despite people’s reaching for distant parts of the universe without rolling motion,<br />
neither should classical metallography disappear as a means of discovering the secrets of the material<br />
world, despite the fact that the most modern instruments in use today are so markedly different<br />
from the original metallographic microscope. Metallography still has something to tell us. This<br />
will surely be confirmed by the “Metallography ’010” symposium.<br />
The Conference Committee wishes to acknowledge the assistance and encouragement that<br />
we have received from many individuals and organizations in the organization of this event.<br />
The Scientific and Organizing Committee wish to create a successful conference in order to<br />
spread professional experience in the wider international community of metallographers and materials<br />
scientists.<br />
We warmly welcome you and wish all of you fruitful inspiring discussions and an enjoyable<br />
stay in the High Tatra Mountains during the 14 th International Conference on Metallography.<br />
The Conference is organized by<br />
DEPARTMEnT Of MATERIALS SCIEnCE,<br />
fACULT Y Of METALLURGY, TECHnICAL<br />
UnIVERSIT Y Of KOšICE<br />
Park Komenského 11<br />
042 00 Košice, SLOvAKIA<br />
Phone: +421 55 602 27 74<br />
+421 55 602 27 68<br />
Fax: +421 55 602 22 43<br />
E-mail: Margita.Longauerova@tuke.sk,<br />
Gabriel.Janak@tuke.sk<br />
Website: www.tuke.sk/metalo<br />
in cooperation with<br />
INSTITUTE OF MATERIALS RESEARCH OF THE SLOvAK<br />
ACADEMY OF SCIENCES IN KOŠICE, SLOvAKIA<br />
METAL SCIENCE SOCIETY AT THE SLOvAK ACADEMY OF<br />
SCIENCES<br />
BRANCH OF THE SLOvAK METALLURGICAL SOCIETY AT<br />
THE FACULTY OF METALLURGY<br />
TU OF KOŠICE, SLOvAKIA<br />
U. S. STEEL KOŠICE, s. r. o., RESEARCH & DEvELOP-<br />
MENT CENTER, SLOvAKIA<br />
Met 2010 nanovo.indd 3 4/22/10 8:38 AM
CHAIR Of THE SYMPOSIUM<br />
Margita Longauerová<br />
Technical University of Košice, Slovakia<br />
InTERnATIOnAL SCIEnTIfIC COMMITTEE<br />
Joint Chairmen<br />
Petr Zuna<br />
Czech Technical University, Prague, Czech Republic<br />
Kenji Ikeuchi<br />
Osaka University, Osaka, Japan<br />
Peter Bernasovský<br />
Welding Research Institute, Bratislava, Slovakia<br />
Ján Bošanský<br />
IBOK a. s., Bratislava, Slovakia<br />
Jozef Billy<br />
Research & Development Center, U. S. Steel Košice, s. r.<br />
o., Slovakia<br />
Christian Chimani<br />
AIT Austrian Institute of Technology , Ranshofen, Austria<br />
Pavel Diko<br />
Institute of Experimental Physics of SAS, Košice,<br />
Slovakia<br />
Ján Dusza<br />
Institute of Materials Research of SAS, Košice, Slovakia<br />
Jana Dobrovská<br />
vŠB - Technical University, Ostrava, Czech Republic<br />
Alistair Doig<br />
Royal Military College of Science, Shrivenham UK<br />
Jan Dutkiewicz<br />
Polish Academy of Sciences, Krakow, Poland<br />
Robert Gero<br />
Gero – Business and Consulting Ltd, Israel<br />
Zdeněk Jonšta<br />
vŠB - Technical University, Ostrava, Czech Republic<br />
Radomila Konečná<br />
University of Žilina, Žilina, Slovakia<br />
Tibor Kvačkaj<br />
Technical University of Košice, Slovakia<br />
Ludvík Kunz<br />
Institute of Physics of Materials AS CR, Brno, Czech<br />
Republic<br />
Pavel Lejček<br />
Institute of Physics, AS CR, Prague, Czech Republic<br />
Peiying Liu<br />
Beijing University of Aeronautics and Astronautics,<br />
Beijing, China<br />
Svätoboj Longauer<br />
Technical University of Košice, Slovakia<br />
Margita Longauerová<br />
Technical University of Košice, Slovakia<br />
Ľudovít Parilák<br />
ŽP Research & Development Center s.r.o., Podbrezová,<br />
Slovakia<br />
Met 2010 nanovo.indd 4 4/22/10 8:38 AM
Peter ševc<br />
Institute of Materials Research of SAS, Košice, Slovakia<br />
Jiří švejcar<br />
University of Technology, Brno, Czech Republic<br />
Miroslav Tvrdý<br />
vŠB - Technical University, Ostrava, Czech Republic<br />
George Vander Voort<br />
USA<br />
Bogdan Wendler<br />
Technical University of Lodz, Poland<br />
Jozef Zrník<br />
COMTES FHT Ltd., Dobřany, Czech Republic<br />
HOnORARY COMMITTEE<br />
Margita Longauerová<br />
Chair of the Symposium and President of the Slovak Metal<br />
Science Society<br />
Ivan Hrivňák<br />
Founder of the Symposium<br />
George Babcoke<br />
President of U. S. Steel Košice, s.r.o., Slovakia<br />
Anton Čižmár<br />
Rector of the Technical University of Košice, Slovakia<br />
Ľudovít Dobrovský<br />
Dean of the Faculty of Metallurgy and Materials Engineering<br />
vŠB - Technical University, Ostrava, Czech Republic<br />
Zdeněk Jonšta<br />
Head of the Department of Materials Engineering, vŠB -<br />
Technical University, Ostrava, Czech Republic<br />
Peter Korytko<br />
General Manager, Research & Development Center,<br />
U. S. Steel Košice, s. r. o., Slovakia<br />
Svätoboj Longauer<br />
Head of the Department of Materials Science, Technical<br />
University of Košice, Slovakia<br />
Vojtech Rušín<br />
Astronomical Institute of the Slovak Academy of Sciences,<br />
Tatranská Lomnica, Slovakia<br />
Peter ševc<br />
Director of the Institute of Materials Research of SAS,<br />
Košice, Slovakia<br />
Karel Tomášek<br />
Dean of the Faculty of Metallurgy, Technical University<br />
of Košice, Slovakia<br />
Igor Tunyi<br />
Member of the Presidium of the Slovak Academy of<br />
Sciences, Slovakia<br />
George Vander Voort<br />
USA<br />
Petr Zuna<br />
vice-dean of the Faculty of Mechanical Engineering,<br />
Czech Technical University, Prague, Czech Republic<br />
Met 2010 nanovo.indd 5 4/22/10 8:38 AM
ORGAnIZInG COMMITTEE<br />
Margita Longauerová - Chair<br />
Gabriel Janák - Secretary<br />
Svätoboj Longauer – Head of Dept. of Materials<br />
Science<br />
Pavel Bekeč<br />
Marián Buršák<br />
Mária fedorová<br />
Martin fujda<br />
Viera Horáková<br />
Peter Horňak<br />
Ondrej Milkovič<br />
štefan nižník<br />
Ladislav Pešek<br />
Marek Vojtko<br />
Andrej Leško - Research & Development Center,<br />
U. S. Steel Košice, s. r. o., Slovakia<br />
Mária fáberová - Institute of Materials Research of<br />
SAS, Košice, Slovakia<br />
Met 2010 nanovo.indd 6 4/22/10 8:38 AM
Date of the Conference:<br />
28 th – 30 th April 2010<br />
Place of the Conference:<br />
ACADEMIA Congress Centre,<br />
Stará Lesná, High Tatra Mountains<br />
Conference Site<br />
The conference will be held at the Academia Congress<br />
Centre situated only 2 km from Tatranská Lomnica, one<br />
of the centres in the High Tatra Mountains, in pleasant<br />
mountain surroundings near the village of Stará Lesná.<br />
Accommodation is reserved directly in Academia and<br />
also in the other hotels named Kontakt, Horizont and Forton,<br />
which are situated quite near the congress centre.<br />
The rooms are equipped with their own bathroom, toilet,<br />
television and phone. Every hotel has its own car park.<br />
The hotels are connected by road with the international<br />
railway station at Poprad (22 km) and the coach station<br />
at Starý Smokovec (10 km). You can find classic Slovak<br />
hospitality and a high standard of services for medium<br />
prices here. There is a swimming pool and sauna in the<br />
congress centre nearby.<br />
April is the beginning of the spring season in the High<br />
Tatras, so there may still be snow at higher altitudes early<br />
in May and therefore opportunities for skiing in the mountains<br />
(e.g. at Lomnické sedlo). Tatranská Lomnica is a<br />
well-known winter sports centre. The average temperature<br />
in April is between +4 and +14°C in lower locations,<br />
such as where Stará Lesná is situated.<br />
Transport<br />
One possibility is air travel to Košice from Prague (Czech<br />
Republic) or from Bratislava. Another possibility is to travel<br />
by train (Intercity express trains from Prague, Bratislava<br />
or Košice to Poprad).<br />
Local Transportation<br />
The Academia Congress Centre can be reached by taking<br />
the High Tatras electric railway or bus from Poprad<br />
(the electric railway and bus stations are near the railway<br />
station) up to Starý Smokovec, and then changing to the<br />
electric railway line or bus in the direction of Tatranská<br />
Lomnica. Get out at the Stará Lesná stop, and walk down<br />
the side-road to the hotels. Alternatively you can take a<br />
taxi from Poprad. The Organizing Committee will arrange<br />
transport from Poprad railway station to the conference<br />
place on request.<br />
The Conference language<br />
The official language is English. In exceptional circumstances<br />
Slovak and Czech may also become feasible.<br />
Contributions will be published in English in a special issue<br />
of the journal Acta Metallurgica Slovaca.<br />
Registration and Reservation<br />
Participants should register on the form provided and<br />
also reserve accommodation on the other form.<br />
Accommodation<br />
Accommodation during the Conference has been reserved<br />
at several hotels, and information with a brief<br />
description of the hotels is given on a separate sheet. Accommodation<br />
will be reserved in accordance with your<br />
wishes, with regard to the earliness of your application.<br />
Prices are in EUR for the whole room including breakfast.<br />
Please complete the relevant section of the Accommodation<br />
Registration Form, and also indicate your alternative<br />
choice of accommodation. Please do not pay your accommodation<br />
charge in advance but on your arrival at<br />
the hotel.<br />
The Conference fee includes participation in all specialist<br />
activities, a copy of the Conference Proceedings as<br />
a special issue of the journal Acta Metallurgica Slovaca,<br />
which will be distributed during registration on arrival<br />
on the conference. The Conference fee also includes the<br />
Welcome Drinks Reception, lunches and dinners on Wednesday<br />
28 th April and Thursday 29 th Aprila 2010.<br />
The Conference fee is:<br />
until April 15 th 2010 330 EUR<br />
after April 15 th 2010 350 EUR<br />
For PhD. Students 250 EUR<br />
For accompanying person 100 EUR<br />
Additional payment on top of the conference fee<br />
for each further contribution 30 EUR<br />
Additional payment on top of the conference fee<br />
for colour print 30 EUR/1 page<br />
Payment<br />
Please send your payment with the registration application<br />
by 15 th April 2010. You can pay the fee also during<br />
your registration at the Academia Congress Centre (only<br />
in cash). The application form together with confirmations<br />
of Conference fees paid are to be returned by mail, email,<br />
fax, or on line via website www.tuke.sk/metalo to:<br />
Prof. Margita Longauerová<br />
Department of Materials Science<br />
Faculty of Metallurgy, Technical University of Košice<br />
Park Komenského 11, 042 00 Košice, Slovak Republic<br />
Fax: +421 55 602 22 43<br />
E-mail: Margita.Longauerova@tuke.sk<br />
Met 2010 nanovo.indd 7 4/22/10 8:38 AM
Bank:<br />
Please send your payment of the conference fee to the<br />
following bank:<br />
Slovenská sporiteľna a.s. Bratislava, II. Mestská pobočka<br />
Košice, Štúrova 5, Slovak Republic<br />
(SWIFT: GIBASKBX) in account no: 0082125228/0900<br />
in favour of the Branch of the Slovak Metallurgical Society<br />
at the Faculty of Metallurgy TU Košice - Pobočka<br />
Slovenskej hutníckej spoločnosti pri Hutníckej fakulte TU,<br />
Košice (IČO: 31 991 670, DIČ: 2020771434,<br />
IBAN: SK28 0900 0000 0000 8212 5228, not registered<br />
for vAT). Please remember to include the reference<br />
code 004, transaction code 0308 and the name of the<br />
participant and organization in the transfer order.<br />
Cancellation<br />
It is regretted that no refund can be made or invoices cancelled.<br />
In this case a copy of the special issue of the journal<br />
Acta Metallurgica Slovaca will be mailed to non-attending<br />
participants. While substitution may be at made any<br />
time, we need however to be informed.<br />
Registration Desk<br />
The Conference Registration Desk will be open in the lobby<br />
of the Congress Centre Academia at the following hours:<br />
Tuesday 27 th April 2010 16 – 22 h<br />
Wednesday 28 th April 2010 7 –18 h<br />
Thursday 29 th April 2010 8 – 12 h<br />
Friday 30 th April 2010 8 – 12 h<br />
Scientific programme<br />
Specialist activities will begin on Wednesday, April 28th.<br />
Contributions will be presented as invited lectures, normal<br />
lectures and in the form of posters.<br />
Lecture sessions<br />
The speakers of invited lectures will be allowed to talk for<br />
25 minutes, while other normal lectures will have a maximum<br />
10 minutes. After each lecture five minutes of<br />
discussion time are planned, and there may be general<br />
discussion at the end of each section. With this in mind,<br />
and as there is only a short time for each presentation of<br />
each lecture, please be careful in the preparation of your<br />
lecture. For your presentation you can use data projector<br />
or overhead projector.<br />
Poster sessions<br />
Those who have applied for a poster will exhibit their results<br />
in the lobby of the conference room in sessions at<br />
time by scientific programme. visits to poster exhibition<br />
session include personal discussions with authors and<br />
are followed by a more formal chaired discussion session.<br />
Poster size is limited to 1 m2 (height x width =<br />
1. 0 x 0. 9 m). The posters are divided by the specialist<br />
programme into 3 day-sessions, and all posters in one<br />
session will be exhibited throughout the day of that session.<br />
Authors are urged to use pictures and texts which<br />
are clearly visible, and to avoid excessively long texts.<br />
The best metallographic photo competition is included<br />
in the programme of Symposium. Please apply for this<br />
competition at the Symposium Registration Desk. This<br />
competition will be in two sections:<br />
• the best scientific photograph<br />
• the most interesting curiosity<br />
Photographs with format 12 x 18 cm are recommended,<br />
or larger. The technical and aesthetic quality of the pictures<br />
will be taken into account in the judging. The photographs<br />
will be displayed on the poster board during conference.<br />
The best poster competition is included in the programme<br />
of Symposium, too.<br />
Exhibition<br />
During the Conference an exhibition of companies will be<br />
organized. The list of companies taking part in the exhibition<br />
will be provided at registration upon your arrival.<br />
Lunch times and coffee breaks are not always at the<br />
same time for all – there are two major lunch times due<br />
to the space limits of the dining room.<br />
Welcome reception<br />
There will be a Welcome Drinks Reception in Hall 2 of<br />
the Academia Congress Centre at 19. 00 on Tuesday 27 th<br />
April 2010. All registered participants are invited to attend.<br />
Conference dinner<br />
The Conference dinner will be held on Thursday 29 th April<br />
2010 at 19.30 h. It will be an informal occasion with a minimum<br />
of speeches.<br />
Met 2010 nanovo.indd 8 4/22/10 8:38 AM
Social programme<br />
As well as the conference dinner, the social programme<br />
includes traditional Slovak Dinner in the Slovak Shepherd´s<br />
Hut on 28 th April 2010. The first evening 27 th April<br />
2010 features another of the very popular lectures by our<br />
leading astronomer Dr. Rušín, this time on the topic “The<br />
Sun and the Marshall Islands”, including slide presentations<br />
of the Tatras landscape, and of an expedition to<br />
the Marshall Islands in 2009 to see the solar eclipse of<br />
the Sun.<br />
A conference tour by bus will be organized according<br />
to participants´ interest to the village of Ždiar, with a guided<br />
tour of the Ždiar House Museum and a re-enactment<br />
of a traditional Slovak wedding with typical folk music<br />
from the local Zamagurie area. Tickets for participants<br />
are available at 10 EUR per person, and tickets must be<br />
purchased in advance at the reception desk on arrival.<br />
The High Tatra Mountains offer many opportunities for<br />
personal walking trips, a visit to the ski centre at Štrbské<br />
Pleso and a visit to Belanská cave. An excursion to the<br />
Institute of Astronomy of the Slovak Academy of Sciences<br />
is possible. If weather conditions permit, an excursion<br />
up to Lomnica Peak (2 643 m) by cable car is possible.<br />
The High Tatra Mountains and their surroundings offer<br />
a great variety of opportunities for additional excursions,<br />
for instance to other historical towns such as Kežmarok,<br />
Levoča or Spišská Sobota. The High Tatras are situated<br />
about 100 km north-west of Košice, which is the second-largest<br />
town in Slovakia with interesting historical heritage<br />
as the educational, commercial and cultural centre<br />
of Eastern Slovakia.<br />
All conference participants may visit the vital Water<br />
World in the Kontakt Hotel – tickets are 20 EUR per person<br />
Met 2010 nanovo.indd 9 4/22/10 8:38 AM
P R O G R A M M E A T A G L A n C E<br />
TUESDAY 27 APRIL 2010<br />
15. 00 – 22. 00 Registration, The Conference Registration<br />
Desk<br />
19. 00 – 20. 00 Welcome Drinks Reception, Hall 2<br />
Social Programme<br />
LECTURE<br />
20. 00 – 21. 30 “The Sun and the Marshall Islands”<br />
v. RUŠÍN, Astronomical Institute of<br />
SAS, Tatranská Lomnica, SR<br />
WEDnESDAY 28 APRIL 2010<br />
7. 00 – 8. 30 Registration, The Conference Registration<br />
Desk<br />
MORnInG SESSIOnS<br />
HALL 1<br />
8. 30 – 9. 00 Opening of the Symposium<br />
9. 00 – 10. 00 PLENARY SESSION 1<br />
10. 00 – 10. 30 Coffee<br />
10. 30 – 12. 00 PLENARY SESSION 2<br />
12. 00 – 12. 30 EXHIBITORS PRESENTATION<br />
Buehler, Gatan<br />
12. 30 – 13. 00 POSTER SESSION 1 (Nos. P1-P19)<br />
vISIT OF THE EXHIBITION<br />
13. 00 – 14. 00 Lunch<br />
AfTERnOOn SESSIOnS<br />
HALL 1<br />
14. 00 – 15. 30 PARALLEL SESSIONS<br />
Session 1 - Solidification and Solid State<br />
Transformation<br />
15. 30 – 16. 00 Coffee<br />
16. 00 – 17. 15 PARALLEL SESSIONS<br />
Session 2 – Phase Transformations<br />
HALL 2<br />
14. 00 – 15. 45 PARALLEL SESSIONS<br />
Session 3 – Process Simulation, Metallographic<br />
Methods and Devices Welding<br />
15. 45 – 16. 15 Coffee<br />
16. 15 – 17. 00 PARALLEL SESSIONS<br />
Session 4 - Welding<br />
HALL 3<br />
14. 00 – 15. 30 PARALLEL SESSIONS<br />
Session 5 – Interrelationship between<br />
Microstructure and Material Properties<br />
15. 30 – 16. 00 Coffee<br />
16. 00 – 17. 15 PARALLEL SESSIONS<br />
Session 6 – Interrelationship between<br />
Microstructure and Material Properties<br />
Session 7– Archaeometallurgy<br />
ACC REGISTRATIOn ROOM<br />
17. 00 Meeting of the Metal Science Society<br />
Committee at the Slovak Academy of<br />
Sciences<br />
19. 00 – 24. 00 Traditional Slovak Dinner in the Slovak<br />
Shepherd´s Hut<br />
Met 2010 nanovo.indd 10 4/22/10 8:38 AM
THURSDAY 29 APRIL 2010<br />
MORnInG SESSIOnS<br />
HALL 1<br />
8. 00 – 9. 30 PLENARY SESSION 3<br />
9. 30 – 10. 15 Coffee<br />
10. 00 – 11. 00 POSTER SESSION 2 (Nos. P20– P31)<br />
vISIT OF THE EXHIBITION<br />
11. 00 – 12.30 PARALLEL SESSIONS<br />
Session 8 – Nonferrous Alloys<br />
HALL 2<br />
11. 00 – 12. 45 PARALLEL SESSIONS<br />
Session 9 – Fractures, Defects and<br />
Material Degradation<br />
HALL 3<br />
11. 00 – 12. 30 PARALLEL SESSIONS<br />
Session 10 – Fatigue and Creep<br />
12. 45 – 14. 00 Lunch<br />
14. 30 - 18. 00 Conference tour<br />
19. 30 Conference Dinner<br />
fRIDAY 30 APRIL 2010<br />
MORnInG SESSIOnS<br />
HALL 1<br />
8. 00 – 9. 00 PLENARY SESSION 4<br />
9. 00 – 10. 00 PARALLEL SESSIONS<br />
Session 11 – Powder Metallurgy<br />
10. 00 – 10. 30 Coffee<br />
10. 30 – 11. 00 POSTER SESSION 3 (Nos. P32– P52)<br />
vISIT OF THE EXHIBITION<br />
11. 00 – 12. 15 PARALLEL SESSIONS<br />
Session 12 – Whiskers, Superconductors,<br />
Nanomaterials, Composites, and<br />
other Modern Materials<br />
12. 15 CLOSING CEREMONY<br />
HALL 2<br />
9. 00 – 10. 00 PARALLEL SESSIONS<br />
Session 13 – Coatings<br />
10. 00 – 10. 30 Coffee<br />
Met 2010 nanovo.indd 11 4/22/10 8:38 AM
SCIEnTIfIC PROGRAMME Of THE<br />
14 th SYMPOSIUM On METALLOGRAPHY<br />
Wednesday 28 th April 2010<br />
7.00 – 8.30 Registration,<br />
The Conference<br />
Registration Desk<br />
8.30 – 9.00 Opening of the symposium<br />
MORnInG SESSIOnS<br />
HALL 1<br />
PLEnARY SESSIOn 1<br />
Chairs: M. LOnGAUEROVÁ, I. HRIVŇÁK<br />
9. 00 Grain boundary segregation and enthalpy/entropy<br />
compensation<br />
P. LEJČEK, A. JÄGER,V. GÄRTnEROVÁ<br />
Institute of Physics, AS CR, Praha,<br />
Czech Republic<br />
9. 30 Metallography and fractography in mechanical<br />
engineering Part I – Metallography<br />
T. šMIDA, J. BOšAnSKÝ, V. MAGULA,<br />
IBOK, a.s., Bratislava,<br />
Slovak Republic<br />
10. 00 Coffee<br />
HALL 1<br />
PLEnARY SESSIOn 2<br />
Chairs: P. LEJČEK, A. DOIG<br />
10. 30 Metallography and fractography in mechanical<br />
engineering Part II – fractography<br />
T. šMIDA,J. BOšAnSKÝ, V. MAGULA<br />
IBOK, a.s.,<br />
Bratislava, Slovak Republic<br />
11. 00 Some metallurgical aspects of main battle<br />
tank armour and anti-armour warheads<br />
A. DOIG<br />
Centre for Materials Science, Cranfield University,<br />
United Kingdom<br />
11. 30 Materials –mechanics linkage for light metal<br />
applications<br />
CH. CHIMAnI,<br />
AIT Austrian Institute of Technology,<br />
Ranshofen, Austria<br />
EXHIBITORS PRESEnTATIOn<br />
12. 00 Buehler<br />
12. 15 Gatan<br />
12. 30 – 13. 00 POSTER SESSIOn 1 AnD VISIT Of<br />
THE EXHIBITIOn<br />
Chairs: P. BARKÓCZY, P. HORŇAK<br />
13. 00 – 14. 00 Lunch<br />
Met 2010 nanovo.indd 12 4/22/10 8:38 AM
AfTERnOOn SESSIOnS<br />
HALL 1<br />
PARALLEL SESSIOnS<br />
Session 1 SOLIDIfICATIOn AnD SOLID STA-<br />
TE TRAnSfORMATIOn<br />
Chairs: K. IKEUCHI, E. MAZAnCOVÁ<br />
14. 00 Effect of cooling rate on the phase transformation<br />
temperatures and structural heterogeneity<br />
of in 7925A nickel based super-alloy,<br />
J. DOBROVSKÁ 1 , S. ZLÁ 1 , K. HRBÁČEK 2 ,<br />
V. VODÁREK 1<br />
1 vŠB-TU Ostrava, Fakulty of Metallurgy and<br />
Materials Engineering, Ostrava, Czech Republic,<br />
2 PRvNÍ BRNĚNSKÁ STROJÍRNA<br />
velká Bíteš a.s., Czech Republic<br />
14. 15 Heat treatment and mechanical properties<br />
of ni-Ti shape memory alloy for production<br />
of medical implants<br />
D. VOJTĚCH, J. KUBÁSEK, M. VODĚROVÁ<br />
Department of Metals and Corrosion Engineering,<br />
Institute of Chemical Technology,<br />
Praha, Czech Republic<br />
14. 30 Effect of casting rate on Ti-nb microalloyed<br />
steel slab surface zone microstructure<br />
M. LOnGAUEROVÁ, P. BEKEČ, M. fEDORO-<br />
VÁ, S. LOnGAUER,<br />
Technical University of Košice, Faculty of Metallurgy,<br />
Department of Materials Science,<br />
Košice, Slovak Republic<br />
14. 45 Structure and mechanical properties of a<br />
cast steel microalloyed with titanium and<br />
vanadium<br />
D. JAnDOVÁ, J. KASL, M. MÍšEK,<br />
1ŠKODA vÝZKUM s.r.o., Plzeň, Czech Republic<br />
2University of West Bohemia in Pilsen,Czech<br />
Republic<br />
15. 00 Application of equal channel angular pressing<br />
to pure magnesium<br />
P. šEDÁ1,2 , A. JÄGER1 , P. LEJČEK1 1Institute of Physics of the AS CR, Praha,<br />
Czech Republic<br />
2Department of Metals and Corrosion Engineering,<br />
Institute of Chemical Technology<br />
Prague, Prague, Czech Republic<br />
15. 15 Study of forces changes in ECAP process<br />
J. TIŽA, T. KVAČKAJ, M. LUPTÁK, P. POÓR<br />
Technical University of Košice Faculty of Metallurgy,<br />
Department of Metal Forming, Košice,<br />
Slovak Republic<br />
15. 30 Coffee<br />
HALL 1<br />
PARALLEL SESSIOnS<br />
Session 2 PHASE TRAnSfORMATIOn<br />
Chairs: P. ZUnA, E. nAVARA<br />
16. 00 Influence of processing conditions on the final<br />
structure of carbon steels in dependence<br />
on Al and n conten<br />
P. ZUnA 1 , J. HORnÍK 1 , P. JAnDOš 2<br />
1 CTU in Prague, Faculty of Mechanical Engineering,<br />
Department of Materials Engineering, Prague,<br />
Czech Republic,<br />
2 PILSEN STEEL s.r.o., Plzen, Czech Republic<br />
16. 15 Austempering influence on mechanical properties<br />
of C-Mn-Si steel<br />
M. MOLnÁROVÁ1 , T. KVAČKAJ2 , R. KOČIšKO2 , L. nÉMETHOVÁ2 , J. SAS2 1Institute of Materials Research SAS Košice,<br />
Slovak Republic<br />
2Technical University of Košice, Faculty of Metallurgy,<br />
Department of Metal Forming, Košice,<br />
Slovak Republic<br />
16. 30 Influence of hot rolling on austenite grain size<br />
and static recrystallization<br />
L. nÉMETHOVÁ 1 , T. KVAČKAJ 1 , M. fUJDA 2 , J.<br />
TIŽA 1 , J. SAS 1 , M. KVAČKAJ 1<br />
1 Technical University of Košice, Faculty of Metallurgy,<br />
Department of Metal Forming,Košice,<br />
Slovak Republic<br />
2 Technical University of Košice, Faculty of Metallurgy,<br />
Department of Materials Science,<br />
Košice, Slovak Republic<br />
16. 45 Influence of small deformations on grains<br />
growth in silicon steels<br />
I. PETRYSHYnETS, f. KOVÁČ, V. STOYKA<br />
Institute of Materials Research SAS Košice, Slovak<br />
Republic<br />
17. 00 Some problems connected with hot and cold<br />
rolled high manganese fe24Mn1.2C12Al alloy<br />
E. MAZAnCOVÁ, I. SCHInDLER,<br />
P. KOZELSKÝ, M. CAGALA<br />
vŠB-TU Ostrava, Fakulty of Metalurgy and Materials<br />
Egineering, Ostrava, Czech Republic<br />
ACC REGISTRATIOn ROOM<br />
17. 00 Meeting of the Metal Science Society Committee<br />
at the Slovak Academy of Sciences<br />
19. 00 – 24. 00 Traditional Slovak Dinner in the Slovak<br />
Shepherd´s Hut<br />
Met 2010 nanovo.indd 13 4/22/10 8:38 AM
HALL 2<br />
PARALLEL SESSIOnS<br />
Session 3 PROCESS SIMULATIOn,<br />
METALLOGRAPHIC METHODS AnD DEVICES<br />
Chairs: J. DOBROVSKÁ, R. KOnEČnÁ<br />
14. 00 Computation of the grain structure by cellular<br />
automaton in single phase aluminum alloys<br />
A. TÓTH, SZ. GYönGYöSI, P. BARKÓCZY<br />
University of Miskolc, Faculty of Materials Engineering<br />
, Miskolc, Hungary<br />
14. 15 Mathematical simulations and mechanical<br />
properties of UfG Cu after ECAR process<br />
M. KVAČKAJ, T. KVAČKAJ, R. KOČIšKO,<br />
J. BACSÓ, L. nÉMETHOVÁ, J. BIDULSKÁ<br />
Technical University Košice, Faculty of Metallurgy,<br />
Department of Metal Forming, Košice, Slovak<br />
Republic<br />
14. 30 Detection of microstructure and texture development<br />
in grain-oriented steels by coercive<br />
force measurements<br />
V. STOYKA, f. KOVAC, I. PETRYSHYnETS<br />
Institute of Materials Research SAS Košice, Slovak<br />
Republic<br />
14. 45 Evaluation of punch wear resistance during<br />
industrial test<br />
P. PEETSALU, M. SAARnA, E. ADOBERG, E.<br />
KULPER, L. LInD, P. KULU<br />
Tallinn University of Technology , Tallinn, Estónia<br />
15. 00 Utilization of atomic force microscopy (AfM)<br />
for biological and chemical applications<br />
š. BOVA, E. KEREšKÉnYOVÁ,<br />
L. HAnÍK, P. PULIš<br />
1 Military Base, Rožňava, Slovak Republic<br />
2 Technical University of Košice, Slovak Republic<br />
15. 15 Anisotropy and residual strees of If steel<br />
J. SAS, M. ČERnÍK, M. VLADO<br />
Technical University of Košice, Faculty of Metallurgy,<br />
Department of Metal Forming, Košice,<br />
Slovak Republic<br />
15. 30 Atlas of materials structures<br />
L. ČELKO1 , L. KLAKURKOVÁ1 , K. SLÁMEČKA2 ,<br />
O. MAn1 , J. šVEJCAR1 1Institute of Materials Science and Engineering<br />
2Institute of Physics and Engineering, Faculty<br />
of Mechanical Engineering, Brno University of<br />
Technology, Brno, Czech Republic<br />
15. 45 Coffee<br />
HALL 2<br />
PARALLEL SESSIOnS<br />
Session 4 WELDInG<br />
Chairs: T. SHIBAYAnAGI, P. BERnASOVSKÝ<br />
16. 15 Weldability of hardenable silicon alloyed<br />
spring steel<br />
E. VUORInEn 1 , B. BAX 1,2 , E. nAVARA 3<br />
1 Division of Engineering Materials, Lulea University<br />
of Technology, Lulea, Sweden,<br />
2 Chair of Functional Materials, Universität des<br />
Saarlandes,Saarbrücken, Germany,<br />
3 Na Člunku 21, 586 01 Jihlava, Czech Republic<br />
16. 30 High strength steel microstructures and properties<br />
after laser welding<br />
S. nĚMEČEK 1 , T. MUŽÍK 1 ,<br />
M. URBÁnEK 2 , Z. nOVÝ 2<br />
1 MATEX PM, Czech Republic, 2 Comtes FHT,<br />
Dobřany, Czech Republic<br />
16. 45 Structural and mechanical characterization<br />
of the heterogeneous joints metal – non - metal<br />
performed by plasma thermal spraying of<br />
oxide ceramics<br />
D.R. PASCU, M. PASCU, R. ROSU<br />
National R and D Institute for Welding and Material<br />
Testing, ISIM,Timisoara, Romania<br />
ACC REGISTRATIOn ROOM<br />
17. 00 Meeting of the Metal Science Society Committee<br />
at the Slovak Academy of Sciences<br />
19. 00 – 24. 00 Traditional Slovak Dinner in the Slovak<br />
Shepherd´s Hut<br />
Met 2010 nanovo.indd 14 4/22/10 8:38 AM
HALL 3<br />
PARALLEL SESSIOnS<br />
Session 5 InTERRELATIOnSHIP BETWEEn<br />
MICROSTRUCTURE AnD<br />
MATERIAL PROPERTIES<br />
Chairs: J. BOšAnSKÝ, A. LEšKO<br />
14. 00 Microstructural and mechanical characteristics<br />
of 3 and 5% Cr steels for heavy rolls and<br />
roll sleeves<br />
K. TITZ 1 , M. TVRDÝ 1 , V. VODÁREK 1 , A.KOR-<br />
ČÁK 2 , B. MOLInEK 2 , Z. BEMBEnEK<br />
2 1vŠB – TU Ostrava, Ostrava, Czech Republic,<br />
2 Devimex s.r.o., Ostrava, Czech Republic<br />
14. 15 Columns forged from a 200 ton bottom poured<br />
ingot<br />
R. HEIDE1 , Z. JOnšTA2 , S. BROTÁnEK1 1Pilsen Steel, Plzeň, Czech Republic,<br />
2vŠB-TU Ostrava FMMI, Ostrava,<br />
Czech Republic<br />
14. 30 Study of relationship of high-alloyed materials<br />
formability and microstructure<br />
P. UnUCKA 1 , A. BORUTA 1 , O. ZACEK 1 , L.<br />
STRILKOVA 1 , J. BORUTA 1 , M. LOnGAUEROVA 2<br />
1 Materials and Metallurgical Resarch Ltd.,<br />
Ostrava, Czech Republic<br />
2 Technical University of Košice, Faculty of Metallurgy,<br />
Department of Materials Science, Košice,<br />
Slovak Republic<br />
14. 45 Consideration on heating temperature and<br />
carbon potential on the structure of carbon<br />
hardened parts<br />
n. POTOCEAnU1 , D. AMARIEI2 , I.C. LUPInCA1 ,<br />
1Eftimie Murgu University of Resita,<br />
Resita, Romania<br />
2Center of Advanced Research, Design & Technology<br />
CARDT, Resita, Romania<br />
15. 00 Study of the influence feSiMgCaCe(RE) on<br />
the graphite compactness degree in<br />
modified irons<br />
C.I. LUPInCA, I.V. RIGOU, C.E. CORnEAn<br />
“Eftimie Murgu” University of Resita, Resita,<br />
Romania<br />
15. 15 Correlation of the microstructure and EPR<br />
test results after various heat treatments of a<br />
13 % chromium steel<br />
R. HAUBnER, S. STROBL, M. ADLER,<br />
P. LInHARDT<br />
University of Technology vienna, Institute of<br />
Chemical Technologies and Analytics,vienna,<br />
Austria<br />
15. 30 Coffee<br />
PARALLEL SESSIOnS<br />
Session 6 InTERRELATIOnSHIP BETWEEn<br />
MICROSTRUCTURE AnD MATERIAL PROPER-<br />
TIES<br />
Session 7 METALLOGRAPHY In ARCHAEOLO-<br />
GY (ARCHAEOMETALLURGY)<br />
Chairs: M. TVRDÝ, L. PEšEK<br />
16. 00 Mechanical properties of ultra-high strength<br />
dual phase steels<br />
G. ROSEnBERG, K. BURIKOVÁ, J. KEPIČ<br />
Institute of Materials Research SAS Košice, Košice,<br />
Slovak Republic<br />
16. 15 Influence of stress concentrators on localization<br />
of plastic deformation of ultra high strength<br />
dual phase steel,<br />
G. ROSEnBERG, K. BURIKOVÁ, J. KEPIČ<br />
Institute of Materials Research of Slovak Academy<br />
of Sciences, Košice, Slovak Republic<br />
16. 30 Metallographic investigations of a historical<br />
bloom found in Styria – Austria<br />
S. STROBL 1 , R. HAUBnER 1 , S. KLEMM 2<br />
1 University of Technology vienna, Institute of<br />
Chemical Technologies and Analytics, vienna,<br />
Austria<br />
2 Prehistoric Commission, Austrian Academy of<br />
Sciences, vienna, Austria<br />
16. 45 Metallographic contribution to interpretation<br />
of the behavior of archaeological<br />
silver artefacts<br />
P. LEJČEK1 , V. GÄRTnEROVÁ1 , J. VAnÍČKOVÁ2 ,<br />
A. JÄGER1 , J. DĚD2 , J. HOLODA3 1Institute of Physics ASCR, Praha, Czech Republic<br />
2Institute of Chemical Technology, Praha, Czech<br />
Republic<br />
3Czech Geological Survey, Praha, Czech Republic<br />
17. 00 Technological features of iron articles from<br />
ancient Russia sites of the Sula river<br />
basin (Ukraine)<br />
V.I. ZAVYALOV<br />
Institute of archaeology of Russian Academy of<br />
Sciences, Moscow, Russia<br />
ACC REGISTRATIOn ROOM<br />
17. 30 Meeting of the Metal Science Society Committee<br />
at the Slovak Academy of Sciences<br />
19. 00 – 24. 00 Traditional Slovak Dinner in the Slovak<br />
Shepherd´s Hut<br />
Met 2010 nanovo.indd 15 4/22/10 8:38 AM
Thursday 29 th April 2010 MORnInG SESSIOnS<br />
HALL 1<br />
PLEnARY SESSIOn 3<br />
Chairs: S. LOnGAUER, P. LIU<br />
8. 00 Diffusion and reaction at solid-state welded<br />
interface of aluminum alloy to steel<br />
K. IKEUCHI 1 , H. SHInGO 2 , M. TAKAHASHI 1 ,<br />
T. SHIBAYAnAGI 1<br />
1 Joining and Welding Research Institute, Osaka<br />
University, Ibaraki, Osaka, Japan<br />
2 Graduate Student of Osaka University, Suita,<br />
Osaka, Japan<br />
8. 30 Description of deformation during friction stir<br />
spot welding of high purity aluminum sheets<br />
T. SHIBAYAnAGI 1 , K. MIZUSHIMA 2 , S. YOSHI-<br />
KAWA 2 , K. IKEUCHI 1<br />
1 Joining and Welding Research Institute, Osaka<br />
University, Ibaraki, Osaka, Japan<br />
2 Graduate student of Osaka University<br />
9. 00 Precipitation and property control of Al-Zn-<br />
Mg-Cu alloys<br />
P. LIU, T. ZHOU<br />
School of Materials Science and Engineering,<br />
BeiHang University, Beijing, China<br />
9. 30 Coffee<br />
10. 00 POSTER SESSIOn 2 AnD VISIT Of THE EXHIBI-<br />
TIOn, Chairs: KASL J., PODRÁBSKÝ T.<br />
HALL 1<br />
PARALLEL SESSIOnS<br />
Session 8 nOnfERROUS ALLOYS<br />
Chairs: J. ZRnÍK, M. fUJDA<br />
11. 00 Post-deformation heat treatment of CGP processed<br />
aluminium to modify deformed structure<br />
and properties<br />
J. ZRnÍK1,2 , T. KOVAŘÍK2 , M. CIESLAR3 1COMTES FHT Ltd., Dobrany, Czech Republic,<br />
2West Bohemian University, Plzen,<br />
Czech Republic<br />
3Charles University, MPF, Prague,<br />
Czech Republic<br />
Met 2010 nanovo.indd 16 4/22/10 8:38 AM
11. 15 Severe plastic deformation of annealed En<br />
AW 2024 aluminium alloy realized by ECAP at<br />
various temperatures<br />
M. fUJDA 1 , T. KVAČKAJ 2 , T. DOnIČ 3 , O. MILKO-<br />
VIČ 1 , M. VOJTKO 1<br />
1 Department of Materials Science, Faculty of<br />
Metallurgy, TU of Košice, Slovakia<br />
2 Department of Metals Forming, Faculty of Metallurgy,<br />
TU of Košice, Slovakia<br />
3 Department of Applied Mechanics, Faculty of<br />
Mechanical Engineering, Žilina University, Slovakia<br />
11. 30 Microstructures and mechanical properties<br />
of En AW 6082 aluminium alloy produced by<br />
equal channel angular pressing<br />
M. GREGER, P. JOnšTA<br />
vŠB -Technical University Ostrava, Ostrava,<br />
Czech Republic<br />
11. 45 The effect of heat treatment on microstructure<br />
of AlSi7Mg0.3 alloy<br />
M. MATVIJA, M. fUJDA, M. VOJTKO<br />
Department of Materials Science, Faculty of<br />
Metallurgy, Technical University of Košice,<br />
Slovakia<br />
12. 00 Hydrogen storage by electrochemical hydriding<br />
of Mg-based alloys<br />
D. VOJTĚCH, V. KnOTEK, J. šERÁK<br />
Department of Metals and Corrosion Engineering,<br />
Institute of Chemical Technology, Prague,<br />
Czech Republic<br />
12. 15 Structural properties of recrystallization-annealed<br />
W-Ir wires under various conditions<br />
K. SKOTnICOVÁ, J. DRÁPALA<br />
vŠB-Technical University of Mining and Metallurgy<br />
in Ostrava, Department of Non-ferrous metals,<br />
Refining and Recycling, Ostrava, Czech Republic<br />
12. 45 – 14. 00 Lunch<br />
14. 30 – 18. 00 Conference Tour<br />
19. 30 Conference Dinner<br />
HALL 2<br />
PARALLEL SESSIOnS<br />
Session 9 fRACTURES, DEfECTS AnD<br />
MATERIAL DEGRADATIOn<br />
Chairs: R. GERO, J. šVEJCAR<br />
11. 00 Metallographical analysis of damaged brass<br />
tubes from main condenser<br />
M. BŘEZInA, J. BAĽÁK, M. BAĽÁK, J. PETZO-<br />
VÁ, Ľ. KUPČA<br />
vUJE a.s., Trnava, Slovakia<br />
11. 15 Impact of unstable casting conditions on surface<br />
quality of continuously cast slabs<br />
D. fEDÁKOVÁ 1 , R. MIšIČKO 2 , S. fEDÁKOVÁ 2<br />
1 U. S. Steel Košice s.r.o., Research and Development<br />
Center, Slovakia<br />
2 Technical University of Košice, Faculty of Metallurgy,<br />
Department of Materials Science, Slovakia<br />
11. 30 Metalographic analysis of longitudinal cracks<br />
type II. on continuously cast slabs<br />
R. MIšIČKO, S. fEDÁKOVÁ<br />
Technical University of Košice, Faculty of Metallurgy,<br />
Department of Materials Science, Slovakia<br />
11. 45 Wear damage micromechanisms in biomedically<br />
graded zirconia<br />
P. HVIZDOš<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
12. 00 Temperature analysis of cutting tool and the<br />
machined surface at drilling of stainless steel<br />
M. GAJDOš1 , J. GECÁK2 ,<br />
A. BERDIS3 , J. JURKO4 1 2 ELBA a.s, Kremnica, Slovakia, Humenné, Slovakia<br />
3 4 vU in Prešov, Nižná Šebastová, Slovakia, Technical<br />
University of Košice, Prešov,<br />
Slovakia<br />
12. 15 Result of cast iron surface treatment improved<br />
by high temperature oxidation process<br />
D. JEDRZEJCZYK<br />
University of Bielsko-Biala, Bielsko-Biala, Poland<br />
12. 30 Estimation of oxygen concentration at the<br />
surface of copper implants with tin coating in<br />
tissue in vivo<br />
M.B. HAJDUGA, M. HAJDUGA, D. JEDR-<br />
ZEJCZYK<br />
University of Bielsko-Biała, Bielsko-Biała, Poland<br />
12. 45 – 14. 00 Lunch<br />
14. 30 – 18. 00 Conference Tour<br />
19. 30 Conference Dinner<br />
Met 2010 nanovo.indd 17 4/22/10 8:38 AM
HALL 3<br />
PARALLEL SESSIOnS<br />
Session 10 fATIGUE AnD CREEP<br />
Chairs: L. KUnZ , V. VODÁREK<br />
11. 00 Influence of the casting pores’ origin on the<br />
fatigue properties of Al-Si cast alloy<br />
R. KOnEČnÁ1 , S. fInTOVÁ1 , G. nICOLETTO2 1Department of Materials Engineering, University<br />
of Žilina, Slovakia<br />
2Department of Industrial Engineering, University<br />
of Parma, Slovakia<br />
11. 15 Microstructure of ultrafine-grained copper after<br />
fatigue loading<br />
L. KUnZ, P. LUKÁš, L. PAnTELEJĚV, O. MAn<br />
Institute of Physics of Materials ASCR, Brno,<br />
Czech Republic<br />
11. 30 Creep properties and microstructure of the<br />
new austenitic steel<br />
T. VLASÁK1 , J. HAKL1 , P. nOVÁK1 ,<br />
A. VÝROSTKOVÁ2 1SvÚM a.s., Prague, Czech Republic<br />
2Slovak Academy of Sciences, Institute of Materials<br />
Research, Košice, Slovakia<br />
11. 45 Minor phase evolution in AISI 316Ln niobium<br />
stabilised steels during creep at 650 °C<br />
V. VODÁREK<br />
vSB-TU Ostrava, Ostrava, Czech Republic<br />
12. 00 Microstructure development during creep testing<br />
of P92 steel weld joint<br />
J. KASL1 , D. JAnDOVÁ1 , E. CHVOSTOVÁ1 , P.<br />
MARTÍnEK2 1ŠKODA vÝZKUM s.r.o., Plzeň, Czech Republic<br />
2ZČU v Plzni, FS, KMM, Plzeň, the Czech Republic<br />
12. 15 Creep rupture behaviour of P23/P91<br />
heterogeneous welds<br />
L. STŘÍLKOVÁ 1 , Z. KUBOŇ 1 , V. VODÁREK 2<br />
1 MATERIALS AND METALLURGICAL RESEARCH<br />
Ltd., Ostrava, Czech Republic<br />
2 vSB – Technical University Ostrava, Ostrava,<br />
Czech Republic<br />
12. 45 – 14. 00 Lunch<br />
14. 30 – 18. 00 Conference Tour<br />
19. 30 Conference Dinner<br />
Met 2010 nanovo.indd 18 4/22/10 8:38 AM
friday 30 th April 2010<br />
MORnInG SESSIOnS<br />
HALL 1<br />
PLEnARY SESSIOn 4<br />
Chairs: P. DIKO, I.-G. CHEn<br />
8. 00 White light emission of ZnS/ZnO:Mn phosphor<br />
layer produced by sputteting and sulfidation<br />
techniques<br />
I.-G. CHEn 1 , Y.-T. nIEn 2<br />
1 Department of Materials Science and Engineering,<br />
National Cheng Kung University, Tianan,<br />
Taiwan<br />
2 Center for Micro/Nano Science and Technology,<br />
National Cheng Kung University, Tianan, Taiwan<br />
8. 30 Metallography in industry<br />
R. GERO<br />
Business and Consulting, Israel<br />
HALL 1<br />
PARALLEL SESSIOnS<br />
Session 11 POWDER METALLURGY<br />
Chairs: E. DUDROVÁ, P. nOVÁK<br />
9. 00 Microstructure and mechanical properties of<br />
fe-Cr-Mo-[Cu-ni]-C sintered steels<br />
E. DUDROVÁ1 , M. ACTIS GRAnDE2 , M. ROS-<br />
SO2 , M. KABÁTOVÁ1 , R. BIDULSKÝ2 , E. HRYHA3 1Institute of Materials Research, SAS, Košice,<br />
Slovakia<br />
2Politecnico Torino-Alessandria Campus, Alessandria,<br />
Italy<br />
3Chalmers University of Technology, Gothenburg,<br />
Sweden<br />
9. 15 Effect of particle size of master alloy (316L)<br />
on porosity and microstructure of fe-ni-Cr-<br />
Mo-Mn-C sintered steels<br />
P. SHYKULA1 , R. ORO2 , E. DUDROVA1 , M. CAM-<br />
POS2 , J.M. TORRALBA2 , S. BEnGTSSOn3 1Institute of Material Research of SAS, Košice,<br />
Slovakia<br />
2Department of Materials Science & Engineering,<br />
Universidad Carlos III, Leganés, Spain,<br />
3Höganäs AB, Höganäs, Sweden<br />
9. 30 Effect of silicon on microstructure of iron and<br />
titanium aluminides produced by reactive sintering<br />
P. nOVÁK, V. KnOTEK, f. PRŮšA, J. šERÁK,<br />
M. VODĚROVÁ<br />
Department of Metals and Corrosion Engineering,<br />
Institute of Chemical Technology, Prague,<br />
Czech Republic<br />
Met 2010 nanovo.indd 19 4/22/10 8:38 AM
9. 45 Evaluation of homogeneity of micro-composite<br />
PM materials<br />
R. BUREš, M. fÁBEROVÁ,<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
10. 00 – 10. 30 Coffee<br />
10. 30 – 11. 00 POSTER SESSIOn 3 AnD VISIT Of<br />
THE EXHIBITIOn<br />
Chairs: D. vOJTĚCH, R. BUREŠ<br />
HALL 1<br />
PARALLEL SESSIOnS<br />
Session 12 SUPERCOnDUCTORS, nAnOMA-<br />
TERIALS, COMPOSITES, CERAMICS, InTER-<br />
METALLICS, BIOMATERIALS AnD OTHER<br />
MODERn MATERIALS<br />
Chairs: R. LI, J. DUSZA<br />
11. 00 Silver partition coefficient at solidification of<br />
bulk single-grain YBCO superconductors<br />
P. DIKO1 , V. AnTAL1 , M. šEfČIKOVÁ1 ,<br />
K. ZMORAYOVÁ1 , K. JUREK2 ,<br />
M. JIRSA2 , I. CHEn3 1Institute of Experimental Physics SAS, Košice,<br />
Slovakia<br />
2Institute of Physics ASCR, Prague, Czech Republic<br />
3Department of Materials Science and Engineering,<br />
National Cheng Kung University (NCKU)<br />
Tainan, Taiwan<br />
11. 15 Synthesis of nano-ceria particles by solvothermal<br />
routes<br />
R. LI, C. fU, CH. LI<br />
Key Laboratory of Aerospace Materials and Performance<br />
(Ministry of Education)<br />
School of Materials Science and Engineering,<br />
Beihang University, Beijing, China<br />
11. 30 Interrelationship between microstructure and<br />
properties in ceramic nanocomposites<br />
J. DUSZA<br />
Institute of Materials Research SAS Košice, Košice,<br />
Slovak Republic<br />
11. 45 Properties of Tin coatings prepared by EB<br />
PVD method<br />
M. fERDInAnDY, J. DUSZA<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
12. 00 Microstructure and fracture properties of<br />
Al2O3-SiC nanocomposites<br />
E. CSEHOVÁ1 , J. DUSZA1 , A. LIMPICHAIPAnIT2 ,<br />
J. SEDLÁČEK3 1Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovak Republic<br />
2Department of Materials, University of Oxford,<br />
United Kingdom<br />
3Institute of Inorganic Chemistry, SAS,<br />
Bratislava, Slovak Republic<br />
12. 15 CLOSInG CEREMOnY<br />
HALL 2<br />
PARALLEL SESSIOnS<br />
Session 13 COATInGS<br />
Chairs: P. KULU, f. LOfAJ<br />
9. 00 Characterization of coating systems by indentation<br />
method<br />
P. KULU, A.GREGOR, M. SAARnA, A. SIVITSKI,<br />
f. SERGEJEV , A. SURŽEnKOV<br />
Department of Materials Engineering/ Tallinn<br />
University of Technology, Tallinn, Estonia<br />
9. 15 Corrosion properties of the Tin and Zrn layers<br />
for dental applications<br />
M. HRADILOVÁ1* , L. JOSKA1 , J. fOJT1 ,<br />
f. HnILICA2 , L. CVRČEK3 1Department of Metals and Corrosion Engineering,<br />
Institute of Chemical Technology, Prague,Czech<br />
Republic *Department of Metals, Institute<br />
of Physics ASCR, Prague, Czech Republic<br />
2ÚJP Prague a.s., Prague-Zbraslav, Czech Republic<br />
3HvM Plasma s.r.o., Prague, Czech Republic<br />
9. 30 friction contact with the transfer films in the<br />
nanocomposite WC-C coatings<br />
f. LOfAJ, P. HVIšČOVÁ, A. DUSZOVÁ<br />
Institute of Materials Research of SAS, Košice,<br />
Slovakia<br />
9. 45 Development of new aluminium based diffusion<br />
coating for steels for energetic industry<br />
J. MLnARIK, J. HRUSKA, J. CIZnER<br />
SvUM a.s., Czech Republic<br />
10. 00 – 10. 30 Coffee<br />
10. 30 – 11. 00 POSTER SESSIOn 3 AnD VISIT Of<br />
THE EXHIBITIOn<br />
Chairs: D. vOJTĚCH, R. BUREŠ<br />
Met 2010 nanovo.indd 20 4/22/10 8:38 AM
POSTER SESSIOn 1<br />
CHAIRS: P. BARKÓCZY, Ľ. PARILÁK<br />
PROCESS SIMULATIOn, METALLOGRAPHIC<br />
METHODS AnD DEVICES<br />
P1 Two models for achieving good mechanical<br />
properties of a casting of ductile cast-iron<br />
f. KAVICKA1 , K. STRAnSKY1 , J. DOBROVSKA2 ,<br />
B. SEKAnInA1 , J. STETInA1 , T. MAUDER1 ,<br />
1Brno University of Technology, Brno, Czech Republic<br />
2Technical University of Ostrava, Ostrava, Czech<br />
Republic<br />
P2 Analysis of a synergic interactions of topological<br />
parameters affecting the level of inhomogeneity<br />
of model structure<br />
J. CHMIELA 1 , D. SŁOTA 2 , J. SZALA 3<br />
1 Department of Materials Science, University of<br />
Silesia, Sosnowiec, Poland<br />
2 Institute of Mathematics, Silesian University of<br />
Technology, Gliwice, Poland<br />
3 Department of Materials Science and Metallurgy,<br />
Silesian University of Technology, Katowice,<br />
Poland<br />
P3 Metallography demands high-level image contrast<br />
P. nOVOTnY, M. ORnA<br />
Institute of Chemical Technology, Prague, Czech<br />
Republic<br />
P4 The suitable methods to the determination of<br />
the trace elements in accessory minerals<br />
S. POSPÍšILOVÁ, D. JAnOVÁ, P. ROUPCOVÁ, f.<br />
KAVIČKA, K. STRÁnSKÝ, T. PODRÁBSKÝ<br />
Faculty of Mechanical Engineering, Brno University<br />
of Technology, Brno, Czech Republic<br />
P5 Analysis of electroenergetic fittings by new<br />
diagnostic methods-method of metal magnetic<br />
memory<br />
J. JURASZEK 1 , Z . JURASZ 2<br />
1 University of Bielsko-Biala, Poland<br />
2 Automotive Research and Development Center<br />
“Bosmal” Bielsko-Biala, Poland<br />
P6 Comparison of depth sensing indentation<br />
method and standard impulse excitation<br />
technique for the Young's modulus measurement<br />
of Si 3 n 4 based ceramics<br />
J. AnDREJOVSKÁ, M. KAšIAROVÁ, J. DUSZA<br />
Institute of Materials Research Slovak Academy<br />
of Sciences, Kosice, Slovakia<br />
SOLIDIfICATIOn AnD SOLID STATE<br />
TRAnSfORMATIOn<br />
P7 ni-Ti and ni-Ti-X based shape memory alloys -<br />
metallurgy and microstructures<br />
I. SZURMAn, M. KURSA<br />
vSB Technical University of Ostrava,<br />
Ostrava – Poruba, Czech Republic<br />
P8 Tinb based shape memory alloys prepared<br />
using EBfZ melting<br />
P. šTĚPÁn, M. LOSERTOVÁ<br />
vŠB-Technical University of Ostrava, Faculty of<br />
Metallurgy and Materials Engineering, Ostrava,<br />
Czech Republic<br />
P9 Effect of initial loading on transformation behaviour<br />
ni-Ti shape memory alloys during thermal<br />
cycling<br />
O. BLAHOŽ, M. KURSA<br />
vŠB – Technical University of Ostrava, Ostrava,<br />
Czech Republic<br />
P10 Alloys ni-22Al-0.24B and ni-22Al-1B after directional<br />
crystallisation, their structure and<br />
properties<br />
M. POHLUDKA, J. MALCHARCZIKOVÁ,<br />
L. HYSPECKÁ, M. KURSA<br />
vŠB – Technical University of Ostrava, 17. listopadu<br />
15/2172, CZ 708 33 Ostrava-Poruba,<br />
Czech Republic<br />
P11 SEM and EDX analysis of continuous casting<br />
of steel<br />
M. GOJIĆ1 , S. KOŽUH1 , B. KOSEC2 1Faculty of Metallurgy, University of Zagreb, Sisak,<br />
Croatia<br />
2Faculty of Natural Sciences and Engineering,<br />
University of Ljubljana, Ljubljana, Slovenia<br />
P12 Dependence of grains hardness on crystallographic<br />
orientation in electrotechnical steels<br />
I. PETRYSHYnETS 1 , V. STOYKA 1 , P. ZUBKO 2 , P.<br />
GAVEnDOVÁ 1 , f. KOVÁČ 1<br />
1 Department of Microstructural Engineering of<br />
Steels, Institute of Materials Research, Slovak<br />
Academy of Sciences, Kosice, Slovakia<br />
2 Department of Materials Science, Technical<br />
University of Košice, Faculty of Metallurgy, Košice,<br />
Slovakia<br />
P13 The influence of finishing and coiling temperatures<br />
on texture of thin bands during the<br />
hot rolling process<br />
M. šEBEK 1 , R. GBURIK 2 , P. HORŇAK 1<br />
1 Department of Materials Science, Technical<br />
University of Košice, Slovakia<br />
2 U.S. Steel Košice s.r.o.,<br />
044 54 Košice, Slovakia<br />
Met 2010 nanovo.indd 21 4/22/10 8:38 AM
WELDInG<br />
P14 Metallographic analysis of Al-Si laser ablated<br />
layers of ultra-high strength steels<br />
P. BERnASOVSKÝ 1 , P. BRZIAK 1 , R. KOSTUŇ 1 ,<br />
A. BRITAnOVÁ 1 , A.I. KORUK 2<br />
1 Welding Research Institute – Industrial Institute<br />
of SR, Bratislava, Slovakia<br />
2 Arcelor Mittal, Senica, Slovakia<br />
P15 Microstructure and hardness of welded joint<br />
B. BOROWIECKI 1 , E. SZKODZIŃSKA 2<br />
1,2 Institute of Engineering Materials, Faculty<br />
of Mechanical Engineering and Mechatronics,<br />
West Pomeranian University of Technology in<br />
Szczecin, Szczecin, Poland<br />
P16 Comparison of mechanical properties and<br />
microstructure of lead-free solders and soldered<br />
joints<br />
M. MARTInKOVIČ, M. DRIEnOVSKÝ<br />
Slovak University of Technology in Bratislava,<br />
InTERRELATIOnSHIP BETWEEn<br />
MICROSTRUCTURE AnD MATERIAL<br />
PROPERTIES<br />
P17 Effect of technological conditions of production<br />
on final mechanical properties and<br />
microstructure tin mill sheets<br />
S. HLEBOVÁ 1 , L. PEšEK 2<br />
1 Department of Material, Faculty of Mechanical<br />
Engineering, TU of Liberec<br />
Czech Republic<br />
2 Department of Material Science, Faculty of<br />
Metallurgy, TU of Košice, Slovakia<br />
P18 Energy balance of deep-drawing steels under<br />
static loading conditions<br />
S. HLEBOVÁ 1 , L. PEšEK 2 , Ľ. AMBRIšKO 2<br />
1 Department of Material, Faculty of Mechanical<br />
Engineering, TU of Liberec, Czech Republic<br />
2 Department of Material Science, Faculty of<br />
Metallurgy, TU of Košice, Slovakia<br />
METALLOGRAPHY In ARCHAEOLOGY<br />
(ARCHAEOMETALLURGY)<br />
P19 Microstructure of a nail from the modern period<br />
found in the context of a historical road in<br />
Styria / Austria<br />
S. STROBL 1 , R. HAUBnER 1 , S. KLEMM 2<br />
1 University of Technology vienna, Institute of<br />
Chemical Technologies and Analytics, vienna,<br />
Austria<br />
2 Prehistoric Commission, Austrian Academy of<br />
Sciences, vienna, Austria<br />
POSTER SESSIOn 2<br />
Chairs: KASL J., PODRÁBSKÝ T.<br />
fRACTURES, DEfECTS AnD MATERIAL DE-<br />
GRADATIOn<br />
P20 Importance of higher strength steel microstrcuture<br />
uniformity for automotive applications<br />
P. KALMÁR, M. ČERnÍK, A. LEšKO<br />
U. S. Steel Košice, s.r.o., Research and Development<br />
USSE, Slovakia<br />
P21 Stable crack growth in automotive<br />
steel sheets<br />
Ľ. AMBRIšKO, L. PEšEK<br />
Department of Material Science, Faculty of Metallurgy,<br />
Technical University of Košice, Košice,<br />
Slovakia<br />
P22 The effect of galvannealing on selected plastic<br />
properties of TRIP steels<br />
L. ČIRIPOVÁ, M. DŽUPOn<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Watsonova 47, 040 01 Košice,<br />
Slovakia<br />
P23 Analysis of scaffold from blast furnace<br />
A. MAšLEJOVÁ, L. HRABČÁKOVÁ<br />
Research and Development Center, U. S. Steel<br />
Košice, s.r.o., 044 54 Košice, Slovakia<br />
P24 Oxidation behavior of 4H14n14W2M and<br />
X50CrMnninbn21-9 valve steels at high temperatures<br />
K. ADAMASZEK, Z. JURASZ<br />
Automotive Research and Development Center<br />
“BOSMAL”, Bielsko -Biala, Poland<br />
P25 Oxidation of a Kanthal APM tube initiated by<br />
nitrogen diffusion<br />
R. HAUBnER, S. STROBL<br />
University of Technology vienna, Institute of<br />
Chemical Technologies and Analytics, vienna,<br />
Austria<br />
P26 The effect of titanium on passive state stability<br />
of austenitic stainless steels<br />
V. ČÍHAL1,2 , L. TUREK1 , M. KADLECOVÁ1 1SvUOM Ltd., Prague, Czech Republic<br />
2vŠB- Technical University Ostrava, Ostrava,<br />
Czech Republic<br />
Met 2010 nanovo.indd 22 4/22/10 8:38 AM
CREEP<br />
P27 Creep of finemet alloy during nanocrystallization<br />
K. CSACH1 , J. MIšKUf1 , A. JURÍKOVÁ1 ,<br />
V. OCELÍK2 1Institute of Experimental Physics SAS, Košice,<br />
Slovakia<br />
2Department of Applied Physics, Materials<br />
Science Centre and Netherlands Institute of<br />
Metals Research, University of Groningen, Groningen,<br />
the Netherlands<br />
nOnfERROUS ALLOYS<br />
P28 Structure of Al-TM-Ce alloys<br />
A. MICHALCOVÁ 1,2, D. VOJTĚCH 1 , P. nOVÁK 1 ,<br />
K. SAKSL 3 , M. KLEMEnTOVÁ 2 ,<br />
Z. SPOTZ 3 , P. ROKICKI 3<br />
1 Institute of Chemical Technology, Prague, Department<br />
of Metals and Corrosion Engineering,<br />
Prague, Czech Republic<br />
2 Institute of Inorganic Chemistry of the Academy<br />
of Sciences, v.v.i., Rez, Czech Republic<br />
3 Institute of Materials Research, Slovak Academy<br />
of Sciences, Kosice, Slovak Republic<br />
P29 Effect of solution treatment on Cu-rich phases<br />
in Al-Si-Cu cast alloy<br />
E. TILLOVÁ, L. HURTALOVÁ, M. CHALUPOVÁ,<br />
Department of Materials Engineering, University<br />
of Žilina, Slovakia<br />
P30 The effect of post-ECAP aging treatment on<br />
microstructure and microhardness of En AW<br />
6082 aluminium alloy<br />
K. nAGYOVÁ 1 , M. fUJDA 1 , T. KVAČKAJ 2<br />
1 Department of Materials Science, Faculty of<br />
Metallurgy, TU of Košice, Slovakia<br />
2 Department of Metals Forming, Faculty of Metallurgy,<br />
TU of Košice, Slovakia<br />
P31 formation of ultra fine grained structure and<br />
mechanical properties titanium<br />
M. GREGER, M. ČERnÝ<br />
vŠB–Technical University of Ostrava, Faculty of<br />
Metallurgy and Materials Engineering,<br />
17. listopadu 15,708 33 Ostrava-Poruba,<br />
Czech Republic<br />
POSTER SESSIOn 3<br />
Chairs: D. VOJTĚCH, R. BUREš<br />
POWDER METALLURGY<br />
P32 Compressibility and microstructure of coated<br />
composite fe/SiO 2 powders<br />
A. MIšKOVA, H. BRUnCKOVA, E. DUDROVA<br />
Institute of Materials Research of SAS Košice,<br />
Košice, Slovakia<br />
P33 Metallographic analysis of<br />
fe/RESIn PM material<br />
M. fÁBEROVÁ, R. BUREš<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
P34 Study of oxides reduction in fe-3Cr-0.5Mo<br />
steel during sintering using continuous monitoring<br />
of sintering atmospere composition<br />
M. HRUBOVČÁKOVÁ, E. DUDROVÁ<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
SUPERCOnDUCTORS, nAnOMATERIALS,<br />
COMPOSITES, CERAMICS, InTERMETALLICS,<br />
BIOMATERIALS AnD OTHER<br />
MODERn MATERIALS<br />
P35 The influence of BaCeO 3 on Y-211 particle<br />
size in YBCO bulk superconductors<br />
K. ZMORAYOVÁ, M. šEfČIKOVÁ,<br />
E. LAVIČKOVÁ, P. DIKO<br />
Institute of Experimental physics, Slovak Academy<br />
of Science, Košice, Slovakia<br />
P36 Thermal characterization of encapsulated<br />
magnetic nanoparticles<br />
A. JURÍKOVÁ, K. CSACH, J. MIšKUf,<br />
M. KOnERACKÁ, V. ZÁVIšOVÁ, P. KOPČAnSKÝ,<br />
G. LAnCZ<br />
Institute of Experimental Physics, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
P37 Structural characterisation of particles created<br />
in Al-ni composites at<br />
moderate temperatures<br />
L. KLAKURKOVÁ 1 , L. ČELKO 1 , M. PETREnEC2,<br />
J. šVEJCAR 1<br />
1 Institute of Materials Science and Engineering,<br />
Faculty of Mechanical Engineering, Brno University<br />
of Technology, Brno, Czech Republic, 2 Institute<br />
of Physics of Materials, Academy of Sciences<br />
of the Czech Republic, Brno, Czech Republic<br />
P38 Microstructure and grain<br />
boundaries of ZrO 2 + Cnf composites<br />
V. PUCHÝ 1 , A. DUSZOVÁ 1 ,<br />
J. DUSZA 1 , J. MORGIEL 2<br />
1 Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
2 Institute of Metallurgy and Materials Science,<br />
Polish Academy of Sciences, Krakow, Poland<br />
Met 2010 nanovo.indd 23 4/22/10 8:38 AM
P39 Microstruture and room temperature mechanical<br />
properties of Si 3 n 4 /SiC composites with<br />
different sintering additives<br />
P. TATARKO 1 , J. DUSZA 1 , P. šAJGALÍK 2<br />
1 Institute of Materials Research, Slovak Academy<br />
of Sciences, Kosice, Slovakia<br />
2 Institute of Inorganic Chemistry, Slovak Academy<br />
of Sciences, Bratislava, Slovakia<br />
P40 Inluence of orientation of short carbon fibres<br />
on thermal expansion of composite with Mg-<br />
2Al alloy matrix<br />
P. šTEfÁnIK, n. BEROnSKÁ, K. IŽDInSKÝ, M.<br />
ZEMÁnKOVÁ, S. KÚDELA JR., P. MInÁR<br />
Institute of Materials and Machine Mechanics<br />
SAS, Bratislava, Slovakia<br />
P41 The influence of annealing on the microstructure<br />
and basic mechanical properties of silicon<br />
carbide ceramics<br />
A. KOVALČÍKOVÁ, J. DUSZA<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
P42 Bending and contact strength of monolithic<br />
ceramic materials<br />
L. HEGEDŰSOVÁ, L. CEnIGA, J. DUSZA<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
P43 Tribological behavior of Cnfs / ZrO 2 composite,<br />
A. DUSZOVÁ, V PUCHÝ, P.HVIZDOš,<br />
f. LOfAJ, J. DUSZA<br />
Institute of Materials Research, Slovak Academy<br />
of Sciences, Košice, Slovakia<br />
P44 Preparation of TiAl-nb based alloys<br />
J. JUŘICA, M. LOSERTOVÁ<br />
vŠB-Technical University of Ostrava, Faculty of<br />
Metallurgy and Materials Engineering, Ostrava,<br />
Czech Republic<br />
P45 The influence of radiation modification and<br />
plastic deformation on changes in the volume<br />
of structural nanovoids and on the properties<br />
of UHMW polyethylene of acetabular cups of<br />
endoprostheses<br />
A. BARYLSKI, J. CYBO,<br />
J. MASZYBROCKA, J. KAnSY<br />
Department of Materials Science, Faculty of<br />
Computer Science and Materials Science, Silesian<br />
University, Sosnowiec, Poland<br />
P46 Mechanical properties of cpTi and nTi dedicated<br />
for medical applications<br />
I. BERnÁTHOVÁ<br />
Department of Materials Science, Faculty of<br />
Metallurgy, TU of Košice, Slovakia<br />
P47 failure of compacted amorphous glass powder<br />
fe ni Si B at low temperatures<br />
76 2 9 13<br />
J. MIšKUf1 , K. CSACH1 , A. JURÍKOVÁ1 , E.D.<br />
TABACHnIKOVA2 , V.Z. BEnGUS2 , A.V. PO-<br />
DOLSKIY2 , V.f. nESTEREnKO3 1Institute of Experimental Physics SAS, Košice,<br />
Slovakia<br />
2B. verkin Institute of Low Temperature Physics<br />
& Eng. UAS, Kharkov, Ukraine<br />
3MA Lavrentev Hydrodynamics Institute RAS, Siberian<br />
branch, Novosibirsk, Russia<br />
P48 Influence on PET structure under thermal treatment<br />
Z. JEnÍKOVÁ<br />
Czech Technical University in Prague, Faculty of<br />
Mechanical Engineering, Department of Materials<br />
Engineering, Karlovo nám. 13, 121 35 Praha<br />
2, Czech Republic<br />
P49 Evaluation of structure of inter-metallic ni 3 Al<br />
based compound alloyed by zirconium in ascast<br />
and orientated state<br />
J. MALCHARCZIKOVÁ, M. KURSA<br />
Department of Non-ferrous metals, Refining<br />
and Recycling, Faculty of Metallurgy and Materials<br />
Engineering, vŠB -Technical University of<br />
Ostrava, Ostrava, Czech Republic<br />
P50 Corrosion resistance of different ceramic materials<br />
in aqueous solution of naCl<br />
M. KAšIAROVÁ1 , D. GALUSKOVÁ2 , M. HnAT-<br />
KO3 , D. GALUSEK2 , J. DUSZA1 , P. šAJGALÍK3 1Institute of Materials Research, Slovak Academy<br />
of Sciences (SAS), Košice, Slovakia<br />
2vitrum Laugaricio – Joint Glass Center of the<br />
Institute of Inorganic Chemistry, SAS, Alexander<br />
Dubček University of Trenčín and RONA, j.s.c.,<br />
Trenčín, Slovakia<br />
3Institute of Inorganic Chemistry, SAS, Bratislava,<br />
Slovakia<br />
COATInGS<br />
P51 Microstructure of ni-P and ni-P-Al 2 O 3 electroless<br />
coatings<br />
M. nOVÁK, D. VOJTĚCH, P. nOVÁK<br />
Institute of Chemical Technology, Prague, Technická<br />
5, 166 28 Prague 6, Czech Republic<br />
P52 CVD coatings used for cold forming tools,<br />
P. BERAXA 1 , Ľ. PARILÁK 1 , S. HOŘEJš 2 ,<br />
M. ULBRICHTOVÁ 3<br />
1ŽP vvC, s.r.o, Podbrezová, Slovakia<br />
2vÚHŽ, a.s, Dobrá 240, 739 51 Dobrá,<br />
Czech Republic<br />
3ŽP, a.s., Podbrezová, Slovakia<br />
Met 2010 nanovo.indd 24 4/22/10 8:38 AM