BATI ORIENT USA - CAT 11 EDITION (High quality) [430MB]

A
WE STRONGLY ADVISE TO CARRY A TEST ON A SMALL CLEAN AND DRY AREA OF THE STONE, AS WE CANNOT PREDICT
THE REACTION OF A TREATMENT ON NATURAL STONE. NO CLAIM WILL BE ACCEPTED IF A TEST HAS NOT BEEN MADE.
Step 1 Step 2 Step 3
INITIAL CLEANINIG OF NEW
SURFACES
Dilute at a ratio of 1
per 10.
PROTECTION AGAINST STAINS
propre
sec
10-25 C°
Surface: Clean /
Dry.
REGULAR MAINTENANCE
Spray the surface,
let stand and wipe
with a damp cloth.
Spread the solution
on the floor.
Pour the product
into a bucket or
suitable container.
Gloss occasionally
to maintain the
appearance.
Pebbles
Quarzite
Rinse thoroughly
with clean water.
Apply with
applicator brush or
roller.
Slate
24 h
Let dry.
Wipe up product,
puddles and drips.
45min
Let dry, do not set
foot for 45 minutes.
24h
Protect from water
for 24h.
For more detailed information, please refer to the chemical product manufacturer website and technical specifications.
401