Routing Protocols Configuration Guide for the SmartEdge OS ...

ip martian
Purpose
Command Mode
Syntax Description
Default
Usage Guidelines
ip martian ip-addr/prefix-length [eq eq-value] [ge ge-value] [le le-value]
no ip martian ip-addr/prefix-length [eq eq-value] [ge ge-value] [le le-value]
Command Descriptions
Adds custom IP martian addresses to the list of default martian IP addresses in the routing table.
context configuration
ip-addr/prefix-length IP address (in the form A.B.C.D) and prefix length, separated by the slash (/)
character. The range of values for the prefix-length argument is 0 to 32.
eq eq-value Optional. Equal to value. The eq-value argument specifies the length of the
mask to be matched; the eq keyword indicates that the mask length must
exactly match the specified value. The range of values for the eq-value
argument is 1 to 32.
ge ge-value Optional. Greater than or equal to value. The ge-value argument specifies the
length of the mask to be matched; the ge keyword indicates that all masks of
a length greater than or equal to the specified value will match. The range of
values for the ge-value argument is 1 to 32.
le le-value Optional. Less than or equal to value. The le-value argument specifies the
length of the mask to be matched; the le keyword indicates that all masks of a
length less than or equal to the specified value will match. The range of
values for the le-value argument is 1 to 32.
For IPv4, the martian addresses of 0.0.0.0/8 and 127.0.0.0/8 are installed in the routing table.
Use the ip martian command to add custom IP martian addresses to the list of default martian IP addresses
in the routing table.
IP martian addresses are host or network addresses about which all routing information is ignored. IP
martian addresses are typically advertised by misconfigured routers using dynamic protocols.
Use the no form of this command to remove a configured IP martian address from the routing table.
Basic IP Routing Configuration 2-7