WELDLINE CATALOGUE 2022

OVENS / OVENS / QUIVERS
QUIVERS
EN 61000-6-2
EN 61000-6-3
EN 60204-1
Hopper ovens for flux
WELDRY FW
◆ This model of oven is used for re-baking submerged arc welding fluxes,
heating the flux between 350 °C and 420 °C for a fixed time. The inside
tank is stainless steel made to prevent from the risk of pollution.
◆ The resistances are positioned inside the hopper for a direct contact
to flux in order to obtain an optimal heating.
◆ The built-in digital control equipment with double thermoregulator
for air and resistances protection avoids the flux being damaged and
allows to set both drying and keeping cycles.
a
WELDRY FW100
To order
W000120469
a
CAUTION:
before use, carefully read
and understand the safety
datasheet available on
our websites
WELDRY FW200
To order
W000120470
WELDRY FW400
To order
On request: other models
(with one or two hoppers - with single
or double digital control equipment)
W000120471
a
80
Technical data WELDRY FW100 WELDRY FW200 WELDRY FW400
Load Capacity 60 kg 160 kg 320 kg
Max. Temperature
Adjustable up to 350 °C - air
Adjustable up to 500 °C - heating elements
Power 4 kW 6.6 kW 7.9 kW
Rating
Three phase - 380 V a.c. - 50/60 Hz
Internal size (w x d x h) 530 x 390 x 640 mm 690 x 690 x 740 mm 690 x 690 x 740 mm (each hopper)
External size (w x d x h) 670 x 710 x 1 300 mm 825 x 819 x 1 330 mm 1 620 x 850 x 1 340 mm
Oven weight 90 kg 116 kg 210 kg
Height of the flap door for flux feeding a = 500 mm a = 450 mm
Packaging dimensions (w x d x h) 690 x 750 x 1 320 mm 850 x 860 x 1 350 mm 1 640 x 870 x 1 360 mm
Weight for transport 100 kg 130 kg 225 kg
All WELDRY
ovens are
supplied
with 2 m long
cable