Untitled - WURTH USA

More documents

Recommendations

Info

© 2011 WURTH USA, Inc. Revision 03/2011 WuRth valve adjusting tools • Each blade thickness has a different color, so the blade required can be found easily • The blade thickness is injected in the plastic handles and therefore cannot blur • Blade width 13mm, length 45mm, total length 100mm Color Thickness mm Art # Purple .10 07135122 White .15 07135123 Blue .20 07135124 Grey .25 07135125 Yellow .30 07135126 stud extRactoR • For removing broken-off studs or threaded bolts. A hole is bored into the parts to be removed according to the Table and the extractor is screwed in to the left. By means of further tightening the broken-off part is extracted without damaging the thread. • Chrome Vanadium, forged • Comes in plastic box Size Art # 15mm, dimensions 1-5 0695684353 stud dRiveR and RemoveR • For rapid fitting and removal of stud bolts with or without thread. • No damage to bolt through welding on of turning aids (nuts, etc.) or use of pliers. • No lock nuts needed. • Positive grip on studs from 10mm long. • No wearing parts. • Diameter 25mm, 65mm long. Applications: • All motor vehicles, agricultural and building machinery maintenance, fleet operators, motorcycle dealers, motor and mechanics; engineering, boat building, etc Fits Stud Size Art # 4 pc. Set 06904211 Set Includes: 6, 8, 10 and 12mm 08.0630
© 2011 WURTH USA, Inc. Revision 03/2011 plastic lined lug sockets • Special design will not mar expensive mag wheels • Available in 3 sizes for most common lugs • Plastic sleeve and plastic liner cap • 1/2” drive Wrench Size Art # 3 pc. Set 0713132890 Set Includes: 17 mm 0713132817 19 mm 0713132819 21 mm 0713132821 Plastic Cover 0713132891 WuRth pin punch set • Chrome vanadium air hardened steel • Tempered safety striking heads will not burr or split • Shaft all hardened, making it extremely tough and durable • Includes plastic case Description Art # Set includes diameters 2, 3, 4, 6 and 8 07146341 08.0635
Page 1 and 2:
tools & shop supplies
Page 3 and 4:
© 2011 WURTH USA, Inc. Revision 03
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90: © 2011 WURTH USA, Inc. Revision 03
Page 139: © 2011 WURTH USA, Inc. Revision 03
show all

Untitled - WURTH USA

Create successful ePaper yourself

Delete template?

Save as template?