Untitled - WURTH USA

More documents

Recommendations

Info

© 2011 WURTH USA, Inc. Revision 03/2011 WuRth metRic thin line double open end WRench set WuRth metRic & us combination WRench sets 08.0010 • Standard: DIN 3110 / ISO 1085 • Material: Chrome vanadium steel • Surface finish: Chrome-plated polished heads • Jaw position 15º, strong heads for heavy duty use Set in mm Art # 12 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27, 25x28, 30x32 071330443 • Ring end POWERDRIV ® double hex • Standard: DIN 3113A / ISO 3318/7738 • Material: Chrome vanadium steel • Surface finish: Chrome-plated polished heads • Jaw position 15º, strong heads for heavy duty use • Double hex ring and jaw position of 15º for an optimal grip ratio, resulting in minimal rotating angle • The 15º angle of the ring wrench provides more free space for the fingers or to work around obstacles Set in mm Art # 11 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22 071330140
© 2011 WURTH USA, Inc. Revision 03/2011 WuRth metRic double ended oFFset box end WRench set Flex Ratchet Ring WRench 08.0015 • POWERDRIV ® double hex • Standard: DIN 838 / ISO 3318 • Material: Chrome vanadium steel • Surface finish: Chrome-plated polished heads • Ring end offset by 18º • The slim design is characterized by mini- mized external dimensions, pronounced rounded contours and smooth edges • Deep-set bolt connections can be loosened optimally due to the deep-offset and fine ring heads Set in mm Art # 8 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 071330540 • The 180˚ articulated joint of the ring wrench allows easy and flexible access to work, even in close tolerance areas Sold Separately: Art. # in mm Art. # in mm Art. # in mm 071425308 8 071425312 12 071425316 16 071425309 9 071425313 13 071425317 17 071425310 10 071425314 14 071425318 18 071425311 11 071425315 15 071425319 19 • Power take-off: ring end POWERDRIV® bihexagonal, fine pitch, 72 teeth • Standard: max. torque according to DIN 899 • Material: Chrome-Vanadium steel • Surface finish: bright polished, chrome-plated • Geometry: open end offset 15˚, ring end 180˚ joint, sturdy heads for heavy duty use • Application: loosen screws with open end, unscrew with ratchet mechanism of ring end • This is a special tool that may not be subject- ed to loads in excess of maximum torque values. For that reason, the tool is of limited suitability for loosening of tight screws Set in mm Art # 6 8, 10, 12, 13, 17, 19 071425350
Page 1 and 2: tools & shop supplies
Page 3 and 4: © 2011 WURTH USA, Inc. Revision 03
Page 5: © 2011 WURTH USA, Inc. Revision 03
Page 57 and 58:
© 2011 WURTH USA, Inc. Revision 03
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
show all

Untitled - WURTH USA

Create successful ePaper yourself

Delete template?

Save as template?