AUCTION CATALOGUE

AUCTION CATALOGUE 

By order of 

Bookham Technology Plc 

LIVE AND WEBCAST AUCTION 

ENTIRE CONTENTS OF 6” SILICON WAFER 

FABRICATION PLANT, ASSEMBLY, QA 

AND TEST FACILITY 

To Be Sold In Lots At: 103C Milton Park, Abingdon, 

Oxfordshire, OX14 4RY 

On: Thursday 18 th March 2004 

At: 10:30am 

On View: Wednesday 17 th March 2004 

9:00am to 5:00pm and morning of sale

CONDITIONS OF SALE 

1. These Conditions together with those set out in the Notice to Purchasers appearing in this catalogue are 

the only terms and conditions subject to which Henry Butcher International Limited (”the Auctioneer”) as 

agent for the Vendor will sell goods to a purchaser (“the Bidder”) and all other conditions, whether express, 

or implied at common law or by statute as are capable of lawful exclusion are hereby excluded. 

2. The Auctioneer may at its discretion or upon the instruction of the Vendor: 

(a) Alter or withdraw all or any lots referred to in this auction catalogue up to the moment at which the 

hammer falls in relation to such lot(s). 

(b) Where a reserve has been placed on any lot, withdraw that lot in the event that the highest bid price 

does not meet the reserve. 

(c) Where two or more consecutive lots are similar in quantity and description offer a choice on any 

subsequent lots to the bidder at the same price. 

(d) Bid for any lot or lots offered for sale at the Auction. 

3. Each lot shall be sold to the highest bidder and in the event of any dispute arising between bidders 

such dispute shall be dealt with in such manner as the Auctioneer may in its absolute discretion 

determine. 

4. Bidding shall be regulated by the Auctioneer in such manner as it may think fit and, without prejudice to 

the generality of the foregoing the Auctioneer may without ascribing any reason therefore, refuse to 

accept any bid or may itself bid for the lot in question on behalf of any third party. 

5. The Purchaser will pay to the Auctioneer such premium on the “Hammer Price” as stipulated in the 

Notice To Purchasers attached hereto, to which will be added Value Added Tax (“VAT”) at the current 

rate. The premium is not negotiable and is payable by all purchasers. The Auctioneer, when acting as 

agent for the Vendor, may also receive commission from the Vendor. 

6. (a) Immediately following the fall of the hammer the Bidder may be required to pay the Auctioneer in 

cash or in whatever form the Auctioneer may agree 25 per cent of the price of each lot which it has 

purchased and will supply the Auctioneer with whatever information the latter may require concerning 

the identity and place of abode/incorporation/centre of main business interest of the Bidder. Deposits 

paid hereunder shall be held by the Auctioneer as general deposit for all lots purchased by the Bidder 

at the sale; 

(b) The balance of purchase monies due will be paid to the Auctioneer on or before the date specified 

in the Notice to Purchasers. 

(c) All lots will be cleared by the Bidder from the premises at which they are sold (subject to the 

conditions set out in Paragraph 7 hereof) not later than the time and date specified in the Notice to 

Purchasers and this condition shall be of the essence of the contract. 

(d) Should the Bidder fail to comply with any of the foregoing requirements the lot or lots which have 

been knocked down to him or any part thereof may be re-offered for sale, destroyed or otherwise 

disposed of by the Auctioneer in any manner as it shall in its absolute discretion deem fit, and any 

deposits paid shall be forfeit; 

(e) Without prejudice to any claims that the Auctioneer and/or the Vendor may have against the Bidder 

for breach of contract or otherwise the Bidder will become liable from the expiration of the time referred 

to in Paragraph 6(c) hereof for all storage, security and administration expenses and the cost of and 

incidental to re-selling and/or otherwise disposing of uncleared items. 

7. (a) The Bidder will only remove lots from the Vendor’s premises by previous arrangement with, and 

subject to the supervision of, the Auctioneer or its appointed representative(s); 

(b) The Bidder will not be permitted to remove any lots it has purchased from the Vendor’s premises 

until all sums due in respect thereof have been paid; 

(c) If, in the Auctioneer’s opinion, removal of any lot or part thereof will be likely to cause serious 

damage to the Vendor’s premises, or any other damage which the Bidder is either unable or unwilling 

to rectify, the Auctioneer may by notice to the Bidder rescind the sale of such lot or permit the removal 

thereof from the premises to proceed subject to such conditions as it may think fit to impose pursuant 

to Paragraph 8 hereof;

(d) Should any party claim possession of or title to all or part of a lot prior to its removal from the 

Vendor’s premises, the Auctioneer reserves the right to rescind the sale thereof or to permit the 

removal thereof from the Vendor’s premises subject to such conditions as it may see fit to impose. 

8. The Bidder will be responsible for all damage that it, its carriers or its agents may do to the property of 

any third party (and in particular, to the Vendor’s premises) in removing the lot(s) it has purchased. 

Should the Auctioneer consider such damage likely to occur, it may require the Bidder to deposit such 

sum of money with the Auctioneer, by way of security for the costs of reinstating that part of the 

premises likely to be damaged by the removal of a lot, as the Auctioneer may require. Should the 

Bidder refuse to deposit such monies, the Auctioneer may refuse the Bidder access to the Vendor’s 

premises for the purpose of collecting all or any of the lots it has purchased, or rescind the sale of such 

lot pursuant to Clause 7(c) above. 

9. (a) The Bidder is on risk once the hammer falls and is strongly advised to effect insurance at once. 

Upon the fall of the hammer the Bidder shall assume all risks in and relating to such lots. The Bidder is 

advised to effect in respect of all such risks arising thereafter any insurance it may consider necessary. 

The duty of the Auctioneer and/or the Vendor to deliver lots shall be deemed performed upon the fall of 

the hammer even if a lot is subsequently damaged and/or part thereof has been lost. 

(b) Property in each lot shall not pass to the Bidder until (i) full payment therefore has been made or 

(where payment or part payment is made by cheque) until the cheque(s) in question have been cleared 

and (ii) each such lot has been removed from the premises in its entirety. 

10. The Vendor and the Auctioneer shall not be liable in respect of any claim whether in contract or in tort 

(other than claims in respect of injury to persons arising out of the negligence of the Vendor or 

Auctioneer) by the Bidder arising out of or in, any way in connection with the sale or purported sale of 

all or any of the goods for any sum exceeding the amount of the deposit or purchase price (as the case 

may be) paid by the Bidder in respect of the goods which are the subject of the claim. 

11. All goods are sold with all faults and imperfections and errors of description. Illustrations in catalogues 

are for identification only. The Auctioneer has used its reasonable endeavours to ensure that the 

description of each lot(s) appearing in this catalogue are accurate, but the Bidder relies upon such 

description at its own risk. Bidders should satisfy themselves prior to the sale as to the condition of the 

lot and should exercise and rely on their judgment as to whether the lot accords with its description. No 

lots sold in this catalogue are sold as new. Subject to the obligations accepted by the Auctioneer under 

these conditions of sale neither the Vendor, the Auctioneer or its servants or agents is responsible for 

errors of description or for the genuineness or authenticity of any lot and no warranty whatever is given 

by the Auctioneer, its servants or agents or the Vendor to the Bidder in respect of any lot and any 

express or implied conditions or warranties are hereby excluded. 

12. The price at which the Bidder purchases each lot will be exclusive of the premium (payable under 

clause 5) and VAT. Where the Bidder intends any lot to be exported outside the UK a refund of VAT 

will (subject to what-ever regulations made from time to time may be in force) be available upon the 

production by the Bidder of such proof of the export as the Auctioneer may require. 

13. The Vendor and the Auctioneer hereby severally exclude liability for any accident or injury, howsoever 

arising, sustained by any person or persons who may attend at the premises for the purpose of the 

auction, inspection, purchase, collection or any other business. 

14. Certain lots have been included on behalf of other clients in this sale by kind permission of the Vendor. 

15. Delivery of lot(s) purchased by the Bidder (which shall be at the sole expense of the Bidder) may not be 

required by him outside normal business hours and is to be made within a reasonable time following 

payment in full. In determining what is a reasonable time just allowance shall be made for all relevant 

contingencies which may arise otherwise than by the negligence of the Vendor or the Auctioneer, and 

in particular, but without prejudice to the generality of the foregoing, for any suspension or failure of 

material services, civil commotion, strike or other industrial action, or other impediment to normal 

delivery outside the control of the Vendor or the Auctioneer. Neither the Vendor nor the Auctioneer 

shall be required to incur any expense towards overcoming such impediment unless indemnified there 

from and put in funds to meet such expense by the Bidder. The Auctioneer shall not be obliged to take

any legal proceedings for the removal of any such aforesaid impediment to delivery of lot(s) which 

might in its own judgement exacerbate the matter or be detrimental to its own reputation or goodwill. 

16. It is expressly brought to the Bidder’s attention that, at the time of sale, any item of plant, machinery or 

equipment contained in the lot(s) may not necessarily comply with the Health and Safety at Work Etc. 

Act 1974, Environmental Protection Act 1990 or any other UK and/or EEC Act or Acts or Regulations 

there under governing the use of that plant, machinery or equipment in a working environment. 

Successful Bidders for any such plant, machinery or equipment are hereby required to ensure that the 

use of any such plant and equipment at a place of work within the UK or EEC does not contravene 

such relevant Act or Regulation there under applicable thereto. The Purchaser undertakes to take 

steps sufficient to ensure the lot will be safe and without risks to Health & Safety when properly used 

and thereby relieves the Vendor and Auctioneer from any Health & Safety duties imposed by sub 

section 1A of Clause 6 of the Health & Safety 1974 Act. 

17. It is expressly brought to the Bidder’s attentions that certain types of plant or main service installations 

could contain blue or white asbestos, dangerous chemicals, etc. which if not handled correctly during 

their removal from the site could be in breach of the Health and Safety at Work Etc. Act 1974 Section 

2-9 and Control of Substances Hazardous to Health Regulations 1988 (COSHH) or any other current 

legislations covering the use of such substances in a working environment. 

18. The Bidder must comply with all current legislations and regulations in relation to the removal/disposal 

of waste including hazardous waste and may be required to satisfy the Auctioneer in relation to their 

disposal/removal procedures. Where waste materials are removed all work must be undertaken by an 

approved and licensed contractor. 

19. Where the Bidder loads any item of plant, machinery or equipment contained in a lot or lots to remove it 

from the site, the Auctioneer shall be under no liability whatsoever to the Bidder or any third party for 

any damage however so caused by the removal and the Bidder shall be responsible for and indemnify 

the Auctioneer against any damage or loss which the Auctioneer may suffer or incur in respect of loss, 

damage or injury suffered by the Bidder’s employees or any third party arising from the removal of the 

plant, machinery or equipment. The Bidder shall indemnify the Auctioneer against any loss damage 

suffered by the Auctioneer which directly or indirectly is attributable to the nature of the plant, 

equipment or machinery acquired by the Bidder whether through breakage rust decay, desiccation, 

leakage wastage, inherent or latent defect or vice or nature deterioration. 

20. The Bidder acknowledges that any software or intellectual property rights attaching to a lot or lots may 

not be the property of the Vendor or capable of transfer by the Vendor and that neither the Vendor nor 

the Auctioneer is in any way authorising the use by the Bidder of such software or intellectual property 

rights and that according any use of such software or exploitation of such intellectual property rights 

shall be at the Bidder’s sole risk. 

21. These Terms shall be governed by and construed in accordance with the laws of England and any 

disputes will be decided only by the English courts.

NOTICE TO PURCHASERS – Thursday 18 th March 2004 

1. Useful Tel. No’s Site Manager: Brian Hardy Tel. +44 (0) 7774 652 412 

Andy Hackett Tel. +44 (0) 7764 308 689 

Auction Accounts: Tel. +44 (0) 20 7405 8411 Fax. +44 (0) 20 7916 5442 

2. Directions: Milton Park is ½ mile East of the A34 about 10 miles South West of Oxford. Exit off 

A34 at “Milton Interchange”. The estate is immediately off the exit roundabout. Follow 

the signs into the estate and continue straight on for ½ mile to the second estate 

roundabout. Take 3 rd exit. The entrance to the auction site is 250 yards on the left. 

3. Viewing: The Lots may be viewed Wednesday 17 th March 2004 between the hours of 9:00am 

to 5:00pm and throughout the sale or if necessary by prior appointment. 

4. Refreshments Light refreshments will be available at the sale. 

5. Sale Procedure: All Attendees must register giving their full United Kingdom address and telephone 

number. All attendees will be asked for secondary forms of identification i.e. Driver’s 

License, Bank Reference, etc. Following the completion of registration procedures a 

bid card will be issued under which purchases will be made. You are responsible for all 

bids made under this number. IMPORTANT – Once a bid number is issued you will 

have signed to acknowledge the conditions under which your bid is accepted. If in 

doubt, these conditions are available in the catalogue, on the sale site or at any of the 

Henry Butcher International Limited Offices. 

6. Buyers Premium: The Buyer will pay to the Auctioneer a premium of 12.5% on the “Hammer Price” to 

which will be added Value Added Tax at the current rate. The Premium is not 

negotiable and is payable by all purchasers. The Auctioneer, when acting as Agent for 

the Seller, may also receive Commission from the seller. All items purchased through 

the Webcast Facility are subject to a Buyers Premium of 16%. 

7. Terms: ALL MONIES DUE MUST BE PAID ON OR BEFORE FRIDAY 19 TH MARCH 2004 ON 

SITE OR AT A HENRY BUTCHER OFFICE. LOTS MAY ONLY BE COLLECTED 

UPON RECEIPT OF CLEARED FUNDS: 

Cheques and Bank Drafts should be made payable to “Henry Butcher 

International Ltd” 

Cash, Telegraphic Transfer: 

Bank details for telegraphic transfer: 

Account: Henry Butcher Client Account 3 

Account Number: 2042 0603 

Sort Code: 20-37-75 

Bank: Barclays Bank Plc 

Bank Address: Barclays Bank Business Centre 

99 Hatton Garden 

London EC1N 8DN 

International Swift Code: BARCGB22 

Bankers Draft, Building Society cheque - which will be subject to verification. 

Cheques – cheques not accompanied by a letter from your bank stating the amount to 

which your cheque will be honoured will be subject to a special clearance surcharge of 

£10.00. 

WE DO NOT ACCEPT CREDIT OR DEBIT CARDS

8. Deposits: In accordance with The Auction Conditions of Sale the Auctioneer reserves the right to 

request a deposit to be paid. Non UK buyers must lodge a £500 cash deposit with the 

Auctioneer prior to registration. See Notice No. 17 on Motor Vehicles. 

9. Buying Order: For the convenience of buyers who may wish to make purchases, but who do not wish 

to attend the sale, the auctioneer will arrange to bid on their behalf. Please complete 

the form at the rear of this catalogue. The Auctioneer shall not be liable for any 

neglect, default or failure in executing bids. There is a minimum bid of £25.00 per lot 

and viewing is strongly recommended. 

10. Risk: The Bidder is on risk once the hammer falls and is strongly advised to effect insurance 

at once. 

Purchasers should note that all Henry Butcher lot display boxes are for display 

purposes ONLY. They are not intended for transportation of contents. 

11. Clearance: All lots to be cleared without fail by Friday 2 nd April 2004 with the exception of 

certain Wafer Fabrication Tools which will have to be removed in a specific order 

for logistical reasons. You should ensure that any haulier holds sufficient insurance 

cover for ‘Public Liability and Goods in Transit.’ Copies of the insurance cover should 

be made available to Henry Butcher Site Supervisor before removal of goods from site. 

Please Note that there will be no clearance during the auction sale. If in any 

doubt please speak to auction site staff. 

The premises will be open 9.00am to 4.30pm Monday to Thursday and 9.00am to 

1.00pm Friday. 

Health & Safety 

Depending on the size of the removal programme, it may be that certain projects will 

come under the Health & Safety Executive (HSE) assuming the role of the client under 

Construction, Design, and Management Regulations 1994 (CDM). This will be where 

walls, roofs, or major structural movement may take place. Any plant movement 

involving more than a “Lift & Shift” situation needs to be referred to Henry Butcher 

International Health & Safety Officer before a “Permit to Work” is issued. 

Clearance of all Lots must be undertaken in accordance with current Health and Safety 

at Work Regulations and, where necessary, Construction, Design, & Management 

Regulations 1994 (CDM). You may have to provide a “Work Method Statement” and 

“Risk Assessment” approved by a Henry Butcher Health and Safety Officer via the site 

supervisor, prior to the removal of any Lots. Henry Butcher reserve the right to halt 

clearance if they feel in their opinion, it is being carried out in an unsafe manner or 

without an approved “Method statement” and “Risk assessment”, as stated. 

Disconnection/ Oil / Liquid Removal 

Electrical disconnections from the MAINS supply are the responsibility of the 

purchaser, unless stated otherwise, and MUST be carried out by an Approved 

Electrician. 

Any fluids remaining in the machine at the time of purchase are the responsibility of the 

purchaser and MUST be removed from site to conform with “COSHH” (Control of 

Substances Hazardous to Health) regulations. 

12. Buyers Choice Where similar lots are indicated in the catalogue the Auctioneer may offer Buyers 

Choice. This allows the successful bidder to choose which (or all) lots in a given run 

they would like on a per lot basis taken either in or out of sequence. 

13. Transfer of Lots The Auctioneer will only accept payment from and permit removal of lots purchased by 

the Purchaser successfully bidding at the sale or its agent acting for the purchaser. 

14. Value Added Tax Purchasers will be charged Value Added Tax at the current rates on the amount of their 

purchases and the buyers premium. 

15. Recording Please note this sale is recorded and we reserve the right to use the recordings to 

assist with resolving disputes or legal issues as appropriate.

16. Conditions of sale The attention of Purchasers is drawn to the Conditions of Sale included in this 

Catalogue. 

17. Purchase of The Auctioneers draw to the attention of buyers contemplating purchasing goods 

goods through a through a finance company that arrangements should be made well in advance 

Finance Company of the Sale so they may make payment in accordance with the Conditions of Sale. 

18. Indivisible Loads Successful Purchasers must obtain the necessary permission (i.e. Police, Ministry of 

Transport, Local Authority) to transport off site loads (long/wide loads) within sufficient 

time prior to the commencement of clearance of those items, in order to comply with 

the clearance period as stated in the Notice to Purchasers. 

19. Overseas Purchasers 

Overseas Purchasers must register showing or providing details of: 

1) Their passport(s). 

2) One other method confirming their identity, i.e. drivers licence, name, address, UK 

Agent (if any), telephone and fax numbers. 

3) Full details of their National Bank and their UK corresponding bank. 

4) Details from their bank confirming method of payment etc. 

Please also ensure that: 

5) Your country, or the country to which the items are destined, holds no import 

restrictions on the goods that you wish to purchase. 

6) The country has no import licence restrictions or a restriction on currency allocation. 

7) The country has no prolonged inspection procedure which might cause excessive 

delay in allowing your goods to be imported. 

8) You receive a fully-descriptive invoice in order that you may arrange payment as 

soon as possible with our bank. Barclays Bank Plc, Barclays Bank Business Centre, 

Hatton Garden, 99 Hatton Garden, London EC1N 8DN. 

9) You employ a reputable freight forwarding organisation. Please note that many of 

the machinery removal companies in this country are not necessarily freight 

forwarders. We will be pleased to advise accordingly. 

10) You have read the Conditions of Sale 

20. Please Note: a) We cannot allow removal of any Lot from the Auction Site until our Accounts 

Department has received notification from our bankers a) that your payment has been 

properly cleared in full. Monies must be transferred to ourselves within the time stated 

in the “Notice to a) Purchasers” on the preceding page. 

b) If there are any special arrangements that you wish to make with us, you must 

contact us at least three days before the Sale date. 

c) VAT PAYMENT AND RETURNS 

Non EEC Purchasers: 

All non EEC Purchasers will be charged VAT at the current rate on each Lot 

purchased. This will be refunded to you as soon as we receive a copy of the bill of 

lading as proof of export. We are unable to refund the VAT on the Buyers Premium 

EEC Registered Companies: 

Non United Kingdom based companies registered in the European Economic 

Community are exempt from VAT except on the Buyers Premium element, subject to 

receipt of the following information: 

i.. Company name and address. 

ii. Telephone / Fax Number 

iii. Contact Name / Position

iv. VAT Number 

v. The number allocated to you for intra-EC trade (where applicable) 

vi. A letter of assurance from a freight forwarder confirming that they will provide 

satisfactory documentation proving export. 

The above information must be supplied in writing to our office: Brownlow House, 50- 

51 High Holborn, London WC1V 6EG. For the attention of Miss Vicky Thomas on your 

official Company notepaper and signed by the contact name quoted. 

FAILURE TO CONFORM TO ALL OF THE ABOVE WILL RESULT IN VAT BEING 

LEVIED AND REFUNDS ONLY BEING MADE UPON RECEIPT OF SATISFACTORY 

EXPORT DOCUMENTATION. 

If you intend to export your purchases using your own transport (either by Sea or Air) 

then VAT will be levied and refunded upon receipt of satisfactory documentation. 

Henry Butcher reserve the right to refuse to accept the bid of any attendee 

should they be unable to satisfy Henry Butcher on any of the above.

WEBCAST BIDDING 

REGISTRATION 

1. Go to www.goindustry.com. You will see the “Bookham Technology Plc” sale listed on the home 

page. 

2. Click the link for “Bookham Technology Plc” sale and you will be transferred to the auction list. 

3. Select the ‘‘register here’’ option and then complete the registration form. Please ensure that you 

read and accept the Terms and Conditions of sale. 

4. As part of the approval process you are requested to fax the fully completed ‘’Payment Details’’ form 

to Henry Butcher at the following no: +44 (0) 207 916 5442 

5. Upon approval you will receive an email confirming your participation and containing instructions for 

the bidding via the GoIndustry Webcast 

PROXY BIDS/ABSENTEE BIDS 

Once you have been approved you will have the opportunity to place proxy bids. To do this, please 

follow these instructions: 

1. Click on the link for proxy bidding that is contained in your approval e-mail. 

2. Login using your username and password. 

3. Go through the list of lots and enter your bid in the field to the right of the lot description. 

4. Activate the ‘’Save’’ button to save your entries before moving on to the next page of lots. 

5. When you are finished entering your proxy bids activate the ‘’Submit Proxy Bids’’. This information 

will then be sent to GoIndustry. 

6. Please note proxy bidding will be available until 18.00pm BST on the day prior to the start of auction. 

ON THE DAY OF SALE 

1. Go to www.goindustry.com you will see the “Bookham Technology Plc” listed on the home page. 

2. Click on the link for the “Bookham Technology Plc” sale and you will be transferred to the auction 

list. 

3. Select the ‘’Login’’ option. This will take you to the login page where you should enter your 

username and password. 

4. Following from this, a small Java applet (a computer application needed to run WebCast) will be 

downloaded onto your computer. 

5. Before the Java applet begins to download, you will be asked to accept a certificate of authenticity 

from GoIndustry. This assures you that the applet has been sent directly from GoIndustry and is 

safe to run on your computer. After clicking on ‘’accept”, the applet will be downloaded and started. 

6. You will now see the bidding applet on your screen. 

7. There are 2 ways to place a bid: 

a. Activate the ‘’Place Bid’’, to place a bid in relation to the auctioneer’s increment. 

b. Enter your bid amount in the field and then activate the ‘’Place Bid’’ button. 

8. For more detailed bidding instructions we recommend you read the Webcast instructions that you 

will find on www.goindustry.com on the auction-listing page in the section ‘’WebCast Instructions’’. 

AFTER THE SALE 

You will receive your invoice confirming your purchases by fax on the day after the sale. All items 

purchased through the Webcast Facility are subject to a Buyers Premium of 16%. 

IMPORTANT NOTE:- 

The Internet is not foolproof and a number of factors such as the speed of your modem, the 

amount of traffic being carried by your service provider and even the integrity of the telephone 

connection can affect how you are able to view the sale. 

Whilst all efforts have been made to ensure fast data transfer from the site neither Henry 

Butcher or GoIndustry can accept responsibility for equipment failure or loss of connection from 

the site. 

For all other technical enquiries relating to Internet bidding contact: 

Henry Butcher IT Support: +44 (0) 207 691 8293

Important Notices 

Due to late withdrawals of Office Furniture rostrum 1 will 

now start at Lot 250 

Order of Sale 

Rostrum One (Blue Tickets) 

Lots 

1 – 249 Withdrawn 

250 – 249 Office Furniture 

300 – 449 Office Equipment 

450 – 919 Laboratory & Factory Furniture 

920 – 929 Vacuum Pumps 

930 – 939 Chiller Units 

940 – 949 Air Compressors & Equipment 

950 – 999 Workshop Equipment 

Rostrum Two (Red Tickets) 

Lots 

1000 – 1124 Microscope & Vision Inspection Equipment 

1125 – 1398 Motion Control, Positioning, Optical Tables & 

Breadboards 

1399 – 1894 Electronic & Optical Test Equipment 

1895 – 1909 Wafer Fabrication Equipment (Located in 

Canada) 

1910 – 2119 Wafer Fabrication Tools & Equipment 

2120 – 2226 Dicing & Polishing Equipment 

2227 – End Assembly & Environmental Test Equipment 

In addition to the above Henry Butcher are pleased to offer 

for sale the entire Cleanroom located at this facility. Please 

contact the Auctioneers for further details

ROSTRUM 1 BLUE TICKETS 

OFFICE FURNITURE AND 

EQUIPMENT, CLEAN ROOM 

FURNITURE, SITE SERVICES AND 

ANCILLARY EQUIPMENT 

1 - 249 Blank Lot 

BUILDING 103A OFFICE 

FURNITURE 

250 A 2500 x 800mm Light 

Oak Reception Unit with 

Overshelf 900 x 450 x 

800mm High Double 

Door Cabinet, 450 x 450 x 


Door Lateral Files 

Cabinet & Blue Cloth 

Upholstered Cantilever 

Frame Chair 

251 Two Grey Leather 

Reception Chairs 

252 An 1800 x 1000mm Light 

Oak Meeting Table with Six 

Blue Cloth Upholstered 

Cantilever Frame Chairs 

253 A 3000 x 1100mmLight 

Oak Conference Table 

254 A Wall Mounted 

Retractable Projector 

Screen, Whiteboard & 

Cloth Notice Board 

255 Contents of Post Room 

Including Letter Racks & 

Two 960 x 560 x 1500mm 

Light Oak Double Door 

Storage Cabinets 

256 Four 'Sasco' Wall Mounted 

Blue Cloth Notice Boards 

257 A Similar Lot 

CANTEEN AREA 

258 Two 1500mm Dia. Light 

Oak Circular Tables with 

Four Blue Cloth 

Upholstered Chairs 

259 - 260 A Similar Lot 

BUILDING 103C 

261 A 1600 x 1200mm Light 

Oak Reception Unit with 

Overshelf, 3 Drawer 

Pedestal & 800 x 600mm 

Light Oak Table 

262 An 1800 x 1200mm light 

oak corner workstation, 3 

drawer mobile pedestal, 

blue cloth screen, cabinet 

and a swivel armchair 

263 An 1800 x 1200mm light 

oak corner workstation, 3 

drawer mobile pedestal, 

965 x 600 x 730mm high 

light oak 2 drawer lateral 

filing cabinet & a swivel 

armchair 

264 A 1500mm Diameter Blue 

Top Circular Table with 

Four Blue Cloth 

Upholstered Cantilever 

Frame Chairs 


266 A 1800 x 1000mm Light 

Oak Oval Table with Four 


Cantilever Frame Chairs 

267 A 1800 x 1000mm Light 

Oak Oval Table with Four 


Cantilever Frame 

Armchairs 


269 A 900 x 550mm Light Oak 

Low Coffee Table with 4 


Light Oak Frame Chairs 

270 Five Blue Cloth 

Upholstered Swivel & Tilt 

Armchairs 


272 Six Blue Cloth Upholstered 

Swivel & Tilt Armchairs 


275 Six Blue Cloth/Grey Metal 

Frame Stacking Chairs 


281 Two Light Oak Lecterns & 

A 900 x 600mm Computer 

Table 

282 Two Noborail II Wall 

Mounted White Board & 

Easels 

283 Two Noborail II Wall 

Mounted White Board 

Assemblies

284 A Noborail wall mounted 

whiteboard & easel, two 

wall mounted notice boards 


BUILDING 103A 

296 Contents of First Aid Room 

297 Forty Four Lion Twin 

Compartment Personnel 

Clothes Lockers 

298 Nineteen Link Twin 


Clothes Lockers 

299 Two 900 x 450 x 1800mm 

Double Door Steel 

Storage Cabinets, Six 

Compartment Clothes 

Locker & Ten 15 

Compartment Overall 

Lockers 

BUILDING 103C OFFICE 

EQUIPMENT 

300 An Elo 'ETL 121C-7SWA-1' 

12.1" SVGA LCD Display 

Colour Touch Screen 

Monitor (Unused) with 

Adapter Cables and Power 

Cords 





Monitor with Adapter 

Cables and Power Cords 





Monitor (No Adapter) 





Monitor (No Adapter or 

Stand) 


369 Blank Lot 

370 A 'Compaq' Armada 'Series 

PP1006' Docking Station 

(Unused) 





389 Blank Lot 



with Monitor Stand 

391 A 'Dell' Latitude C/Dock II 

Docking Station 

392 Five Various Computer 

Monitors 



410 A Canon 'BTC-6500' 

Colour Bubble Jet Printer 


415 A Canon 'BTC-7000' 

Colour Bubble Jet Printer 

416 A Hewlett Packard '2000C' 

Professional Series Colour 

Printer with Kodak Image 

Enhancements 


Colour Printer and an 

Epson FX-880 Printer 

418 A Hewlett Packard 'Deskjet 

350' Colour Printer / Plotter 

419 Blank Lot 

420 Six Various Office Fans 

421 Two Sasco '250/2' 

Overhead Projectors 


423 A 3M '9700' Overhead 

Projector 

424 A Hewlett Packard 'Design 

Jet 1050C' 4 Colour Printer 

/ Plotter 

425 A GPT 'Focus 500' Video 

Conferencing Centre TV, 

Monitor, JVC Camera & 

Zoom Lens in Mobile 

Plastic Kiosk 


427 A Hewlett Packard 'Colour 

Pro 8' Colour Plotter

428 Eight Siemens 'CSL1000' 

Boxed Analogue 

Telephone Handsets 

(Unused) 


434 A Large Quantity of 

Siemens Telephone 

Handsets 


CLEAN ROOM 

LABORATORY & 

FACTORY FURNITURE 

450 A GBP 1500 x 800mm 

Adjustable Height E.S.D. 

Bench with An 

Adjustable Footrest & A 

GPB Multi Socket Safety 

Extension Lead 


452 A GBP 1100 x 800mm 


Bench with Footrest & A 

GPB Multi Socket Safety 



473 A GBP 1100 x 625mm 


Bench with Footrest & 

Multi Socket Safety 



479 A GBP 1500 x 800mm 


Bench with Footrest & Multi 

Socket Safety Extension 

Lead 

480 A GBP 1800 x 800mm 


Bench with Footrest 

481 A GBP 1100 x 800mm 


Bench with Footrest & Multi 


Lead 


486 A GBP 1100 x 620mm 


Bench with Multi Socket 

Safety Extension Lead 


491 A GBP 1100 x 800mm 




492 A GBP 2000 x 800mm 





494 Blank Lot 

495 A Technochair Black 

Vinyl Mobile E.S.D. Gas 

Lift Swivel Chair with 

Footrest & Seat 

Adjustments 



Vinyl Mobile E.S.D. Gas 

Lift Swivel Chair with 

Seat Adjustments 



Vinyl E.S.D. Gas Lift 

Swivel Chair with 


Adjustments 




Swivel Chair with Seat 

Adjustments 


556 Three Black Vinyl Swivel 

Chairs 

557 Eight Black Cloth 

Upholstered E.S.D. Swivel 

Chairs 

558 Five Mobile Black Cloth 

Upholstered E.S.D. Swivel 

Chairs 

559 A Nortek Modulex 1800 x 

900mm E.S.D. Bench with 

Single Door Pedestal 


562 Four Light Oak Top Tables 

563 A Similar Lot

564 A Nortek 1800 x 900mm 

E.S.D. Bench with Single 

Door Pedestal & Multi 

Socket Extension Lead 

MICROSCOPE ROOM 

565 A Nortek 1800 x 750mm 





567 A Nortek 1800 x 750mm 

E.S.D. Bench & Multi 



575 A Nortek 1500 x 750mm 

E.S.D. Bench 


584 A G B P 1100 x 800mm 

E.S.D. Bench with 

Overshelf 

585 Four Simco Guardian 

Adjustable Speed Ionising 

Air Blowers 



Swivel Chair with 


Adjustments 


610 Blank Lot 

611 An Advance Galatrek 'ETD' 

4KVA Uninterruptible 

Power Supply 


614 Blank Lot 

CHIP PREPARATION 

CLEANING ROOM 

615 A Nortek 1800 x 750mm 

E.S.D. Bench & Multi 


Lead 




Swivel Chair with Seat 

Adjustments 


624 A Bisley 900 x 450 x 

1800mm High Double Door 

Steel Storage Cabinet 

625 A 900 x 300 x 1650mm 

High 5-Tier & An 1800 x 

400 x 1725mm High 4- 

Shelf Storage Units 

626 A 1900 x 600 x 2000mm 

High 6-Shelf & A 1060 x 

410 x 2100mm High 6- 

Shelf Storage Units 


POLISHING ROOM 

627 A Nortek 1800 x 750mm 

E.S.D. Bench with Double 

Pedestal Drawers, Multi 


Lead & Operators Swivel 

Chair 


632 A Nortek 1800 x 750mm 

E.S.D. Bench with Multi 


Lead & Operators Swivel 

Chair 


634 Two Nortek 1800 x 900 x 


Sliding Door Storage 

Cabinets 


637 Two Bisley 1000 x 470 x 


Tambour Front Storage 

Cabinets 


639 Two Bisley 1000 x 470 x 



Cabinets 

640 Two 900 x 450 x 1800mm 

High Double Door Steel 


641 Three 450 x 450 x 910mm 

High Single Door Steel 


642 Two Bisley 9 Drawer Steel 

Files Cabinets 


644 - 645 Blank Lot


CHANGING ROOM 

646 A Nortek 1800 x 750mm 

Double Pedestal Bench, 

Three Helmsman 10 

Compartment Clothes 

Lockers, Helmsman Soiled 

Clothes Collection 

Cupboard & Two 27 

Compartment Footwear 

Storage Units 


LABORATORIES 

650 A Nortek 1800 x 750mm 


3 Drawer Pedestal, 

Overhead Shelving, 

Lighting & Multi Socket 



652 A Nortek 1800 x 750mm 


Door Pedestal, Overhead 

Shelving, Lighting & Multi 


Lead 

653 A Nortek 1800 x 750mm 

E.S.D. Bench with 3 

Drawer Pedestal & Multi 


Lead 

654 A Bisley 1000 x 450 x 


Tambour Front Cabinet & 

A 460 x 480 x 910mm High 

Single Door Steel Cabinet 

655 Two Steel 4 Shelf Wall 

Mounted Racks 

(Dismantled) 

656 A Nortek 1800 x 750mm 


Drawer Mobile Pedestal 

& Multi Socket Safety 


657 A Nortek 1800 x 750mm 

E.S.D. Bench with Mobile 2 



Lead 


661 A Nortek 1800 x 750mm 


Drawer Mobile Pedestal & 



662 A Nortek 1800 x 750mm 

E.S.D. Bench with Mobile 3 



Lead 


664 A Nortek 1500 x 750mm 


Drawer Mobile Pedestal & 



665 A Nortek 1800 x 750mm 


Drawer Single Pedestal, 

Overbench Shelves & 




669 A Nortek 1800 x 900mm 


Drawer Double Pedestal, 

Overbench Shelves & Multi 


Lead 

670 A Nortek 1800 x 900mm 


Door Pedestal, Overbench 

Shelves & Multi Socket 


671 A Nortek 1500 x 750mm 


Drawer Pedestal and 670 x 

670mm Table 

672 A Nortek 750 x 750mm 

Corner Unit with Overshelf 

673 A Nortek 1800 x 750mm 


Drawer Single Pedestal & 



674 A Nortek 1500 x 750mm 


Overshelf, 2 Drawer Mobile 

Pedestal & Multi Socket 


675 A Nortek 1200 x 750mm 


Overshelf

676 A Nortek 1800 x 750mm 


Drawer Double Pedestal & 



677 A Nortek 1800 x 750mm 






680 A Nortek 750 x 750mm 


Overshelf & Multi Socket 



685 A 750 x 750mm Corner 

Unit with Overshelf 


687 A Nortek 1800 x 750mm 


Overshelf, 2 Drawer Single 




690 A Nortek 1800 x 750mm 


Overshelf, Single Door 




692 A Nortek 1800 x 750mm 






697 A Nortek 1800 x 750mm 




Lead 


703 A Nortek 1800 x 750mm 




Lead 


707 A Nortek 1800 x 750mm 


Drawer Double Pedestal & 




711 A Nortek 1800 x 750mm 

E.S.D. Bench with Multi 


Lead 


715 A Nortek 1800 x 750 x 



Cabinet 


717 A Nortek 1800 x 750 x 



Cabinet 


719 Two GPB 1100 x 800mm 

E.S.D. Benches 

720 Blank Lot 

721 Two Bisley 1100 x 470 x 

2225mm Double Tambour 

Front Storage Cabinets 


727 Three Bisley 1100 x 470 x 



728 A Bisley 1000 x 470 x 


Front Storage Cabinet 

729 A Bisley 1000 x 470 x 

2225mm Double 


Cabinet with Lateral 

Filing System 


732 A Bisley 900 x 450 x 


Storage Cabinet with Fitted 

Lin Bin Holders & Bins 


734 Two Bisley 900 x 450 x 


Storage Cabinet 

735 - 738 A Similar Lot

739 A 900 x 450 x 1800mm 

High Double Door Storage 

Cabinet, Double Door 

Timber Cabinet & A 

Computer Table 

740 A Bisley 910 x 460 x 


Storage Cabinet & 600 x 

500 x 900 Double Door 

Cabinet 

741 Blank Lot 

742 Two Triumph 15 Drawer 

Steel Files Cabinet 


745 Two Bisley 15 Drawer 

Steel Files Cabinet 


751 Three Mobile Fire 

Retardant Flip Top Refuse 

Sack Holders 

752 Four Fire Retardant Flip 

Top Refuse Sack Holders 

753 Five Fire Retardant Flip 

Top Refuse Sack Holders 

754 A Quantity Of Black Plastic 

E.S.D. Refuse Bins 

755 Fifty Wez 265 x 160 x 

40mm Deep Black Plastic 

E.S.D. Stacking Storage 

Boxes Complete with Lids 



E.S.D. Boxes Various 

776 Thirty Triple Pull Out Tray 

E.S.D. Storage Boxes 

777 A Quantity Of RS Lin Bins 

Various 

778 A 90 Compartment Pull 

Out Tray Steel Storage 

Unit 

779 A Talco 6 Drawer Tool 

Cabinet 

780 Four RS '506-479' 240V 13 

Amp 10-Power Point 

Distribution Panels 


782 Four APW 240V 13Amp 

13-Power Point Extension 

Leads 

783 Two APW 240V 13Amp 9 

Point & One 13 point 

Extension Leads 

784 Four Alphel 6 Socket 

Extension Leads 


786 Ten 4 Socket Extension 

Leads 


789 Four Bondline Wrist 

Strap & Footwear Test 

Stations 


800 Three 15 Compartment 

Smock Lockers, A 

Helmsman 10 

Compartment Locker, 

Helmsmans Soiled Smock 

Locker & Two Multi 


Storage Units 

801 Four Wall Mounted Steel 

Shelving Units 


803 A 1750 x 2130 x 930mm 

Wide 'L' Shaped E.S.D. 

Bench & A 1240 x 930mm 

E.S.D. Bench 

804 A Nortek 1500 x 750mm 

E.S.D. Bench & 4 Drawer 

Filing Cabinet 

805 Two 900 x 450 x 1800mm 

Double Door Steel Storage 

Cabinets 

806 Sixteen Bays Of Light 

Duty Quick Release 4- 

Tier Storage Units Each 

Bay 100 x 600 x 2000mm 

High & A 5-Tier 1800 x 

900 x 2000mm Storage 

Unit 

807 Eleven 4 Tier Chrome 

Storage Racks Various 

808 - 809 Blank Lot

810 Eighteen 10 Compartment 

Smock Lockers, Two 

Soiled Smock Collection 

Lockers, Eight Multi- 


Storage Units, Two Refuse 

Bins & Three 25 

Compartment Wall 

Mounted Personnel 'In/Out' 

Indicators 

FIRST AID / LOCKER 

ROOM 

811 The Contents Of First Aid 

Room 

812 Fifteen Armour Twin 


Lockers 

813 Twenty Four Link Twin 


Lockers 

814 Eighteen Lion Twin 


Lockers 

815 Ten Four Compartment 

Personnel Lockers Various 

816 Four 1800 x 1200mm Wall 

Mounted Blue Cloth Notice 

Boards 

817 Three 1800 x 1200mm 

Wall Mounted Blue Cloth 

Notice Boards 

818 Two 1200 x 900mm Grey 

Cloth Notice Boards 

819 A Trend 'T30AF' & A 

Hitachi '1300' Vacuum 

Cleaner 

BUILDING 103A TEST 

SAMPLE PREPARATION 

ROOM 

820 Two Nortek 1800 x 750mm 



822 A Technochair Black Vinyl 

E.S.D. Gas Lift Chair with 

Footrest 




Steel Cabinets 

825 Two 4 Drawer Filing 

Cabinets 

FAILURE ANALYSIS 

ROOM 

826 A Nortek 1800 x 750mm 


Drawer Single Pedestal 

827 Two Nortek 1800 x 750mm 


828 Two E.S.D. Benches 

Various 

829 Three Nortek 1200 x 

750mm E.S.D. Benches 

830 A Nortek 1200 x 750 x 



Cabinet 



Mobile E.S.D. Gas Lift 

Chair with Footrest 


E.S.D. Gas Lift Chair with 

Footrest 


842 Blank Lot 

843 Two Mobile Safestor 500 x 

500 x 725mm Steel 

Cabinets 

844 A Beco 'RB12' Refrigerator 

RELIABILITY LAB 

845 A Nortek 1500 x 750mm 



A Mobile Blue Cloth 

Upholstered Armchair 

846 A 1200 x 750mm & A 1200 

x 600mm E.S.D. Bench 

with 3 Drawer Pedestals 

847 Three Nortek Benches 

Various 

848 Blank Lot 

849 A Nortek 800 x 750 x 

950mm Double Sliding 

Door Storage Cabinet 

850 A Bisley & Office World 

900 x 450 x 1800mm High 


Cabinet

851 Fifty Wez 265 x 160 x 

40mm Deep Black Plastic 

E.S.D. Stacking Storage 

Boxes Complete with Lids 


855 Blank Lot 

856 Four Technochair Black 


Chairs 



BUILDING 103C STORES 

AREA 

861 Two Wall Mounted 3 Tier 

Shelving Units & Two 

Whiteboards 

862 Three Double Door Steel 


863 A Nortek 1500 x 750mm 

E.S.D. Workbench & A 

Technochair Black Vinyl 

E.S.D. Chair 

864 A Nortek 1500 x 750mm 

E.S.D. Workbench with 

Charcoal Cloth Chair 

865 A 1300 x 750mm & A 600 x 

500mm E.S.D. Bench 


869 A Chubb 'Europa' Safe 

O.D. 680 x 800 x 1475mm 

High 

870 Eight Bays Of Light Duty 6- 

Tier Shelving (Each Bay 

1000 x 400 x 2200mm 

High) 


872 Six Bays Of Light Duty 6- 

Tier Shelving (Each Bay 

1000 x 400 x 2200mm 

High) 



874 A 3 Tread Safety 

Warehouse Step Ladder 

FIRST FLOOR 

875 Ten Bays Of 4 Tier 

Lightweight Shelving (Each 

Bay 1250 x 800 x 2000mm 

High) 

876 Twenty Two Bays Of 4 Tier 

Lightweight Shelving (Each 

Bay 1250 x 400 x 2000mm 

High) 

877 Nine Bays Of Mixed 

Lightweight Shelving 



879 A 3 Tread Safety 

Warehouse Step Ladder 


BUILDING 103A 

890 Contents Of Wafer Fab 

Clean Room Changing 

Room. Eleven 10 

Compartment Garment 

Lockers, 4 Soiled 

Garment Collection 

Lockers, 24 


Storage Unit. 1100 x 

800mm E.S.D. Bench, 

Litter Bins & 3 Mobile 

Storage Bins 



Steel Storage Cabinets, 

1800 x 750mm Double 

Sliding Door Cabinet with 

Nortek Multipoint Extension 

Lead 

892 Three 900 x 450 x 800mm 


Cabinet 

893 Two 900 x 450 x 800mm 


Cabinet 


895 Three 960 x 525 x 

1600mm Light Oak Double 

Storage Cabinet & A Light 

Oak 2 Tier Bookcase 

896 A Nortek 1800 x 750mm 

Double Sliding Door 

Cabinet, Nortek 1800 x 

750mm Operators Bench & 


Swivel Armchair 

897 Two Bisley 1000 x 470 x 



898 A Similar Lot

899 Three Bisley 1000 x 470 x 



900 Two 4 Drawer Filing 

Cabinets 

901 Two Rosengrens 'Disco' 

Fire Safety Data Cabinets 

902 Blank Lot 

903 Two 900 x 450 x 1800mm 

High & 900 x 450 x 920mm 

High Double Door Steel 


904 An 1800 x 900mm Single 

Drawer Workbench with 

Overshelf & A Nortek 1500 

x 750mm Bench 

905 Three 2060 x 620 x 

2010mm High Twin Bay 

Four Shelf Quick Release 

Storage Racks 

906 Blank Lot 

907 Two 900 x 450 x 1800mm, 

One 900 x 450 x 920mm 


Cabinets 

908 A Quantity of Assorted 

Plastic Lin Bins 

909 An Ezi Lift 'ELP20-122' 

200Kg. Platform Lifter 

910 A Clark 'Strongarm' 850 x 

500mm Hydraulic 

Platform Lifter 

911 A Four Wheeled Trolley 

912 Three Gas Bottle Trolleys 

Various 

913 A Nilfisk 'GSP ' Floor 

Scrubber 

914 Four Bisley 900 x 450 x 





ANCILLARY EQUIPMENT 

VACUUM PUMPS 

920 A Reitschle 'SKG294- 

2.02' 2760 RPM +130 - 

140mbar Vacuum Pump 

921 A Busch 'SV1140 C001 

TLXX' 100hPa (mbar) 

Vacuum Pump 


926 An Edwards 'E2M80 

FSPX' Vacuum Pump 


CHILLERS 

930 A TRANE 3-D 'ECGAL 

700 R407C' WATER 

CHILLER S/n EKK3369 


932 AN INDUSTRIAL 

COOLING SYSTEMS 

'TAE031 R22' WATER 

CHILLER S/n 2200005988 

933 A TRANE 'ER TAB 110' R 

404A PACKAGED AIR 

CHILLER WITH 

ADAPTIVE CONTROL S/n 

EKK2144 

934 A GRUNFOSS 'AFE' 80 

LTR. 10 BAR 

MEMBRANE TANK 

935 AN INDUSTRIAL 

COOLING SYSTEMS 

'TAE 301' R407C 

REFRIGERANT 

PACKAGED WATER 

CHILLER S/n 1200918383 


937 An Industrial Cooling 

Systems 'TAE 051' R22 

Refrigerant Packaged 

Water Chiller S/n 

1200705504 


Systems 'TAE 121' Twin 

Fan Refrigerant 

Packaged Water Chiller 

S/n 1200809411 


Systems 'TAE081' Single 

Fan Refrigerant 

Packaged Water Chiller 

S/n 1200704521 (1997) 

AIR COMPRESSORS

940 A COMPAIR 

BROOMWADE 'CYCLON 

475SR' 13 BAR 750 - 

4800RPM PACKAGED 

AIR COMPRESSOR S/n 

F180/0392 


942 A COMPAIR 

BROOMWADE 

'MOTIVAIR CYCLON 

345SR ' 13 BAR 750 - 

4800RPM PACKAGED 

AIR COMPRESSOR S/n 

F170/0597 


944 A Domnick Hunter 

Pneudri Electronic 

'DXE104D/S' High 

Efficiency Compressed 

Air Dryer S/n 25884A 


948 An Abbot 1100mm Dia x 

2000mm. 2000Ltr. Vertical 

Welded Mild Steel Air 

Receiver 

949 A Cool Technology 

1100mm Dia. X 2000mm. 

2000Ltr. Vertical Welded 

Mild Steel Air Receiver 

WORKSHOP 

950 A Rong Fu 'RF30' Bench 

Top 12 Speed, 30mm 

Capacity Mill/Drill 

Machine (240Volt) 

951 A Draper 'B16/16' MT2 

Taper 16 Speed 16mm 

Capacity Bench Drill 

(240Volt) 

952 A De Walt 'DW710' 250mm 

Dia. Circular Saw (240Volt) 

953 Three Operators Benches 

Various & Four Engineers 

Vices 

954 Blank Lot 

955 A Vixen Twin Arm Bead 

Blast Cabinet 

956 A 5Mtr. X 2.45Mtr. X 

2.25Mtr. High Steel 

Double Door Container 

with Fitted Lighting 


958 A SemiGas Panel 

comprising 'GSM1A' & 

'AS0-2' Safety Monitors, 

Automatic Change Over & 

Valve Controls 

959 A SemiGas Panel 

comprising Two 'GSM1A' , 

One 'AS0-2' & One 'AS0- 

200' Safety Monitors, 

Automatic Change Over & 

Valve Controls 

END OF SALE 1

ROSTRUM 2 RED TICKETS 

VISION EQUIPMENT 

BUILDING 103C 

MICROSCOPE ROOM 

1000 A Nikon 'MM-40' Measuring 

Microscope S/n 1302177 

fitted with Four Objective 

Lenses (10X, 20X CF Plan 5X 

and CF Plan 50X), JVC 'TK- 

C1380' Video Camera and 

Sony Monitor 

1001 A Nikon Measuring 

Microscope fitted with Four 

Objective Lenses (5X, 10X 

CF Plan, 20X and 50X), JVC 

'TK-C1381' Video Camera, 

Sony Monitor, Prior 

'Proscan' 2 Axis Positioning 

Stages and Controller 

1002 A Nikon Measuring 

Microscope fitted with Three 

Objective Lenses (5X, CF 

Plan, 20X and 50X), JVC 'TK- 

C1381' Video Camera, Sony 

Monitor Mitsubishi 

'CP15B4P' Colour Video 

Copy Processor, Prior 

'Proscan' 2 Axis Positioning 

Stages and Controller 

1003 A Nikon 'SMZ-800' Microscope 

with Meiji 'Fl150 Light Source 

and Ring Light Mounted On 

Melles Griot Breadboard with 

Two '17Max303' Nanomax - 

TS Three Axis Precision 

Stages 

1004 A Prior Scientific 'G121A' 

Fibrescope S/n 16504 with 

Three Objectives and A Meiji 

Fibrescope Frame 

1005 A Microscope on Stand with 

Built In Lamp 

1006 A Nikon 'SMZ800' Microscope 

fitted with Plan 1X Objective on 

Adjustable Bench Stand 

1007 A Meiji 'EMZ' Microscope with 

Optical Table Mount, Fiber-Lite 

'MI-150' Light Source and Ring 

Light 

1008 A Prior Scientific 

'STEREOMASTER 3' 

Microscope Inspection System 

with Meiji Fl-150 Light Source 

1009 A Wild 'M8' Microscope On 

Adjustable Stand fitted with 

Two 15x/17 Eyepieces, Plan 

1x Objective and Schott 

'KL1500' Light Source with 

Twin Light Guide 


S/n 1002740 On Adjustable 

Bench Stand fitted with Plan 

1X Objective, Fiber-Light 'MI- 

150' Light Source and Ring 

Light 

1011 A Nikon 'SMZ 800' Microscope 


Bench Stand fitted with Plan 

1X Objective, Meiji 'Fl-150' 

Light Source and Ring Light 

1012 A Nikon 'SMZ 800' Microscope 

On Adjustable Bench Stand 

fitted with Plan 1X Objective, 

Intralux '5000-1' Light Source 

and Ring Light 

1013 A Meiji 'EMZ' Microscope On 

Adjustable Bench Stand fitted 

with Two 'SWF20X' Eyepieces 

1014 A Meiji 'EMZ-TR' Microscope 


Bench Stand fitted with Two 

'SWF20X' Eyepieces 


1016 A Meiji 'EMZ' Microscope S/n 

89553 On Adjustable Bench 

Stand fitted with Two 


1017 A Meiji 'EMZ ' Microscope S/n 

89295 On Adjustable Optical 

Table Mount fitted with Two 





'SWF20X' Eyepieces and Ring 

Light 





Light



Optical Table Mount fitted with 

Two 'SWF20X' Eyepieces and 

Ring Light 


S/n 78393 fitted with Two 



S/n 58923 fitted with Two 





Two 'SWF20X' Eyepieces 








Table Mount with Ring Light 





Light 




Two 'SWF10X' Eyepieces and 

Ring Light 

1029 An Olympus 'SZ60' 

Microscope with Light Source 

and Ring Light 


1031 A Meiji Microscope On 

Adjustable Optical Table 

Mount fitted with Two 


1032 One Nikon 'SMZ-800' and Four 

Meiji 'EMZ' Microscopes For 

Spares S/n 1002297 

1033 Four Assorted Microscopes 

For Spares 


on Bench Frame S/n 1002787 

with Newport 'M426' Series 

Two Axis Stages 

1035 An Alignment Jig Comprising 

Nikon 'SMZ800' Microscope 

Mounted On 600 x 300mm 

Optical Breadboard with 

Intralux '5000-1' Light Source 

and Elliot Scientific Three Axis 

Precision Stage 


Leica 'MZ6' Microscope 



Intralux '5000-1' Light Source, 

Elliot Scientific Three Axis 

Precision Stage and 

Pneumatic Product Fixture. 

(No Objective Lens) 





Intralux '5000-1' Light Source, 

Elliot Scientific Three Axis 

Precision Stage and 

Pneumatic Product Fixture 



Watek 'WAT-902' High 

Resolution Camera Mounted 

On 900 x 600mm Newport 

Optical Table Top with High 

Magnification Lens, JVC 

Monitor, Elliot Martock 

Precision Stages and Aerotech 

Three Axis Stages with 

'DR300' Controller 

1040 A Nikon Microscope Film 

Camera on Adjustable Stand 

1041 An Olympus 'CHC' Microscope 

fitted with Two 10x Eyepieces, 

Three Objective Lenses 

(MA10, MA50 & MD Plan 5), 

Polaroid 'SX70' Film Adapter, 

Built In Light Source with 

Power Supply 

1042 A Nikon 'Optiphot' 

Microscope fitted with Two 

15x Eyepieces, Four 

Objective Lenses (M Plan 5, 

10, 20 & 40 DIC), Camera 

Take off, Built In Light 

Source and Power Supply

1043 A Lietz '020-448.026' Ergolux 

Microscope fitted with Two 

10x Eyepieces, Two 

Objective Lenses (MS Plan 

10 & 20) and Built In Light 

Source 

1044 - 1045 Blank Lot 

1046 A Finetech 'FINEPLACER 96 

'LAMBDA'' Fine Placement 

Bonding / Rework Station S/n 

N/A 

1047 An Assortment of Microscope 

Parts as Lotted 

1048 A Schott 'KL1500' Light Source 

with Dual Light Guide 


S/n 01742 with Ring Light 



S/n 2119 


1056 A Schott '20750' Light Source 

S/n 103306 


1062 A Meiji 'FL-150' Light Source 


1068 A Volpi 'Intralux 5000-1' Light 

Source with Ring Light 



Source S/n 201908 with Dual 

Light Guide 


Source S/n 203222 

1082 - 1084 Blank Lot 

1085 A Leica 'CLS 100X' Light 

Source S/n 02746 with Ring 

Light 

1086 A Leica 'CLS 150' Light Source 

with Ring Light 

1087 A Leica 'CLS-150X' Light 

Source S/n 01949 with Ring 

Light 

1088 A Meiji 'FL-180' Light Source 

with Ring Light 

1089 A Light Source with Dual Light 

Guide 

1090 A Volpi 'INTRALUX 9000' 

Lightsource S/n 203610 with 

Ringlight 

1091 Three Video Cameras (JVC 

'GP-KR222', Watec 'WAT- 

202B' & 'WAT-902B') 

1092 Three JVC Video Cameras 

1093 Three JVC 'TK-C1381' Video 

Cameras 

1094 A Panasonic 'GP-KR222' 

Video Camera with Lens 


1098 A Panasonic 'GP-KR222' 

Video Camera with Angled 

Lens S/n 93B03590 

1099 A Watek 'WAT202B' Camera 

with 90º S/n 41152 


1103 A Hamamatsu 'C7557' Power 

Unit S/n 940221 

1104 Two Electrophysics Micron 

Viewer cameras 

1105 Two Electrophysics '7290A' 

Micron Viewer cameras 

1106 Three Electrophysics '7290A' 

Micron Viewer cameras 

1107 An Assortment of Lenses and 

Optics as Lotted 

1108 A Ziess 'Stemi 2000' 

Microscope On Adjustable 

Stand fitted with two 10x/23 

Eyepieces 

1109 A Leica 'MZ6' Microscope On 


with Two 10x/21B Eyepieces, 

1.0x Objective. 



Adjustable Binocular, Two 

10x/21B Eyepieces, 1.0x 

Objective 



Adjustable Binocular, 1.0x 

Objective. (No Eyepieces) 



with 1.0x Objective (No 

Eyepieces)

1113 A Bausch & Lomb 'SZ4' 

Microscope On Adjustable 

Stand fitted with Two 15X 

Eyepieces 

1114 A Bausch & Lomb Microscope 

On Adjustable Stand fitted with 

Two 10X Eyepieces, Light 

Source and Power Supply 


On Bench Stand fitted with 

Two 10X Eyepieces, Light 

Source and Power Supply 




Two 10X Eyepieces 


On Bench Stand fitted with 

lower mirror and Two 10X 

Eyepieces 



Two 10X Eyepieces 

1120 A Vickers Instruments 

Microscope on Stand (No 

Eyepieces) 

1121 Two Bausch & Lomb 

Microscopes For Spares 

(without Stands) 

1122 Five Assorted Microscopes For 

Spares 

1123 Six Assorted Microscopes For 

Spares 

1124 A Vision Engineering 'ISIS' 

Microscope Eyepiece 

Magnifier with Power Supply 

1125 An Incomplete Rig Comprising 

of Tru-Stone 760 x 760 x 

150mm Granite Block Fitted 

with Aerotech 'ABL20030' 

Precision Long Travel Stage, 

Newport Broadband 

Retroreflector and Assorted 

Optical Mounts (Located in 

Lab 4) 

MOTION CONTROL 

EQUIPMENT BUILDING 103C 

MELLES GRIOT ROOM 

1126 A Norland Inc 'NC-3000' 

Interferometer (No PC Unit) 

S/n 1321 

1127 A Newport Precision Three 

Axis Stage Comprising Two 

Long Travel Horizontal 

Stages, one Vertical Stage 

and Connecting Cables 


1143 A Newport Precision Four 

Axis Stage Comprising Two 

Long Travel Horizontal 

Stages, one Vertical Stage, 

one Actuator Driven 

Rotation Stage and 

Connecting Cables 


1151 A Newport Single Axis 

Translation Stage with Spacer 

Blocks 


1153 Four Newport Single Axis 

Translation Stages 

1154 A Newport Precision Four Axis 

Stage Comprising Two Long 

Travel Horizontal Stages, one 

Vertical Stage, one Actuator 

Driven Rotation Stage and 

Connecting Cables 

1155 A Heavy Duty Three Axis 

Stage Comprising Two 

'TSP/100' and one 'TSP1050' 

Stages 





Stages and 'Z413A' Rotation 

Stage Plus Two Axis Manual 

Adjustments 




Stages and 'Z414A' Rotation 

Stage Plus Two Axis Manual 

Adjustments 

1159 Blank Lot 

1160 A Melles Griot '17ANC003/MD' 

Three Axis Precision 

Piezoelectric Stage 

1161 A Melles Griot '17ANC001/MD' 

Three Axis Precision 

Piezoelectric Stage 

1162 A Similar Lot

1163 - 1164 Blank Lot 

1165 A Melles Griot '17MAX303' 

Nanomax-TS Manual Three 

Axis Stage 

1166 A Melles Griot Manual Four 

Axis Stage 

1167 A Melles Griot 'N/A' Three Axis 

Precision Piezoelectric Stage 

S/n 53038 

1168 A Melles Griot Manual Four 

Axis Stage 


1170 A Melles Griot And Elliot 

Manual Four Axis Stage 

Mounted on Two Long Travel 

Two Axis Stages 

1171 A Newport '561D' Ultralign 

Precision Two Axis Stage 


Nanomax-TS Manual Three 

Axis Stage 



Nanomax-TS Piezoelectric 

Motorised Three Axis Stage 


1176 A Melles Griot Precision Four 

Axis Stage fitted with Three 

'17DRV517/R' Actuators 


1178 A Melles Griot Manual Single 

Axis Stage 

1179 A Melles Griot Precision Two 

Axis Stage 

1180 A Melles Griot '17AMB003/D' 

Precision Three Axis Stage 


1183 A Two Axis Stage with Melles 

Griot '17DRV014' Actuator 

1184 A Melles Griot '17NST103' 

Translation Stage 

1185 A Melles Griot '17DRV001' 

Actuator 

1186 A Newport Single Axis Stage 

with Rotation Stage 


1188 A Newport Rotation Stage on 

Frame 

1189 An Elliot Precision 3 Axis 

Stage 

1190 Two Newport Precision 

Vertical Stages 

1191 A Newport 'M-562 SERIES' 

Precision Three Axis Stage 

with Three 'AD100' Actuators 

and Manual Tilt Stage 

1192 A Newport 'M-443 SERIES' 

Manual Single Axis Stage with 

Manual Turn and Tilt 

1193 An Elliot Martock Three Axis 

Stage 

1194 A Newport 'M-561' Ultralign 

Precision Four Axis Stage with 

Tilt 

1195 Two Newport 'M 461 Series' 

Precision Stages 

1196 An 150mm X 150mm 

Optosigma Manual X Axis 

Breadboard with Two New 

Focus '8082' Stages and 

Various Spacer Blocks 


Two Elliot Three Axis Stages, 

Central Goniometer and 

Rotation Stage 


Two Elliot Three Axis Stages, 

Central Goniometer, Rotation 

Stage and Micrometer 


1200 Five Elliot Martock Three Axis 

Stages 

1201 An Assortment of Newport 

Stages and Blocks 

1202 An Assortment of Optosigma 

Precision Stages 

1203 Two Kensington Laboratories 

'6000' Series Single Axis 

Stages with Newport 'M- 

UTR160' Rotation Stage 

1204 An Assortment of Stages as 

Lotted 

1205 Five Microcontrole Stages 

1206 A Large Quantity of Newport 

and Thorlabs Mounts and 

Probe Holders as Lotted 

1207 An Assortment of Positioning 

Components as Lotted


1210 An Assortment of Probe 

Holders and Actuators as 

Lotted 

1211 An Assortment of Positioning 

Components as Lotted 

1212 Five Newport 'CMS SERIES' 

Cable Management Systems 


1215 Six Melles Griot Manual 

Rotation Stages Fitted on 

Various Mounts 

1216 Three Exfo 'FLS-235B' Pocket 

Fault Locators S/n 124413-37 


1219 Three Boonton '952009' 

Voltage Sensors S/n 31765 

1220 A Quantity of Assorted 

Components Including 

Newport 'FS-ND' Filter Set, 

Three Boxes of Lenses and 

Adapters 

1221 Three Laboratory Jacks 

1222 An Alignment jig comprising 

Kensington Laboratories 

Actuator and Newport 

'PMA10715' Actuator 


Two Kensington Laboratories 

Actuators 

1224 A Newport Overbench Gantry 

Fitted with Various 'M426 

Series' Stages 


1227 Two Newport Overbench 

Gantries 

1228 A Large Quantity of Assorted 

Stages, Brackets, Mounts Etc. 

as Lotted 

1229 A Large Quantity of Fibres and 

Patch Leads as Lotted 

1230 A Quantity of Fibre 

Maintenance Kits, Fibres and 

Polarisers as Lotted 

1231 Two 250 X 160 X 40mm 

Granite Master Flat Slabs 

1232 A Thorlabs 600 X 300mm 

Optical Breadboard 


1235 A Newport 610 X 610mm 


1236 A Melles Griot '07 OBC 501' 

310 X 310mm Optical Table 

Top 


1240 A Melles Griot 610 X 310mm 








1244 An Ealing 1500 X 900mm 





1248 An 900 X 610mm Optical 

Breadboard 

1249 A Newport 'VH3648W-OPT' 

1200 X 900mm Pneumatic 

Optical Table with Monitor 

Stand 




Optical Table 




Stand 


1264 A Melles Griot '070FP726' 


Optical Table S/n 701080 

1265 A Melles Griot '070T1169' 



1266 A Melles Griot '070WS516' 



1267 A Melles Griot '070FP726' 



Stand S/n 701138

1268 A Melles Griot '07 OTI 055' 


Optical Table, Nortek 

Overhead Shelf Unit and 

Power Points S/n 700069 

1269 A Melles Griot '070TL131' 


Optical Table with Nortek 

Overhead Shelf Unit and 

Power Points S/n 1702 

1270 A Newport 1800 X 1200mm 

Pneumatic Optical Table with 

Nortek Overhead Shelf Unit 

and Power Points 

1271 A Newport 1800 X 1200mm 


Jun-Air Compressor and 

Nortek Overhead Shelf 

1272 A Newport 1800 X 1200mm 


Pneumatic Isolation Mounts 

(Not including items on table) 

1273 - 1279 Blank Lot 

1280 Two Universal fibre Optic 

Detectors 

1281 A Newport '818-IS-1' Universal 

fibre Optic Detector S/n 1254 

1282 Two Newport '818-IS-1' 

Universal fibre Optic Detectors 

S/n 1762 

1283 Two Newport '818-IS-1' 

Universal fibre Optic Detectors 

with Two '818-IR' Detectors 

S/n 503 

1284 A Newport '2832-C' Dual 

Channel Optical Power Meter 

S/n 1569 


1299 A Thorlabs 'MDT 690' 3 Axis 

Piezoelectric Controller 


1303 A Thorlabs 'MDT693' 3 Axis 







1308 An Elliott Scientific 'E2100' 

Dali' Three Axis Controller S/n 

0120 

1309 A Melles Griot '17PCW002' 

Three Axis Piezoelectric 

Controller S/n 500789 


1314 - 1317 Blank Lot 

1318 A Melles Griot '17PCZ003' 

Three Axis Piezoelectric 



1320 A Photon Control 'MDA 503- 

75C' Three Axis Piezoelectric 

Controller 


1322 Two Melles Griot '17MST001' 

Stepper Motor Modules S/n 

804096 

1323 A Newport 'ESA-C' Three 

Channel Drive Controller S/n 

1657 


1327 A Newport 'ESA-CXA' Micro 

Drive Controller S/n 1328 


1329 A Newport 'ESP100' Universal 

Motion Controller/Driver S/n 

108 

1330 A Newport 'MM4006' Motion 

Controller S/n NSN with Three 

'Z418B', one 'Z419B' Driver 

Units and Two 2 Axis 

Encoders 


1334 A Newport '8000' Modular 

Controller S/n 999800003 with 

Two '8605' Combination 

LDD/TEC Units and one 

Processor Unit 

1335 A Newport 'PM500-C' Motion 

Controller S/n PMC60369 with 

Five Driver Units 



Controller with Four Driver 

Units 

1339 - 1348 A Similar Lot


Controller S/n PMC60446 with 

Three Driver Units 


1355 A Kensington '4000C' Motion 

Controller with Three Driver 

Units 


1359 An Aerotech 'DR500' Motion 


1360 An Aerotech 'DR300' Motion 

Controller S/n 122128-A-1-1 

1361 Six Custom Built Optical Boxes 

1362 Five Custom Built Optical 

Boxes 


1364 A Pelco 'PMC-14F' Video 

Monitor S/n 90714846 


1371 A Video Monitor S/n 720527 

1372 A Samsung 'SMC-142' Video 

Monitor 

1373 A Samsung 'SMP 150' Video 

Monitor 

1374 A JVC 'TM-A14PN' Video 



1378 A JVC 'TM-14 EKD' Video 



1381 A Vantage Video Monitor 

1382 A Sony Trinitron Video Monitor 

1383 A Vista 'KVM12D' Video 

Monitor S/n M0010162 

1384 A 'VMM12' Video Monitor 

1385 Two Video Monitors 

1386 - 1398 Blank Lot 

ELECTRONIC TEST 

BUILDING 103C 

CLEANROOM AREA 

1399 A Keithley '238' High Current 

Source Measure Unit 

1400 A Keithley '2000' Digital 

Multimeter S/n 636010 


1403 A Keithley '487' Picoameter / 

Voltage Source S/n 0756249 


1407 A Keithley '487' Picoameter / 

Voltage Source (Front Panel 

Cracked) S/n 0756242 


1409 A Keithley '2420' 3A 

Sourcemeter 

1410 A Keithley '6514' System 

Electrometer 


1415 An ILX Lightwave 'LDT 5910B' 

Temperature Controller S/n 

59102425 


1417 A Newport '325' Temperature 



1420 A Newport '3040' Temperature 

Controller 


1429 - 1430 Blank Lot 

1431 An Agilent Technologies 

'11896A' Polarization State 

Controller S/n 3411A01896 


1438 A Hewlett Packard '11896A' 

Polarization State Controller 

S/n 3411A00687 



Optical Attenuator 

1310/1550nm 

1450 A JDS Uniphase 

'HAO97+20ASU4' Optical 

Attenuator S/n FD036789 


'HA97E+10ASU4' Optical 

Attenuator S/n FD034269 


'HA97E+10ASU3' Optical 

Attenuator S/n Ad098645 

1453 A Boonton '9232' RF Voltmeter 

S/n 46701 

1454 A Boonton '9231' RF Voltmeter 

1455 A Similar Lot

1456 A Boonton '7200' Capacitance 

Meter 

1457 - 1459 Blank Lot 


'E3631A' Triple Output DC 

Power Supply, W/GPIB/Rs 90 - 

(6V, 5A 0 - +/-25V, 1A) 


1463 A Hewlett Packard 'E3631A' 

Triple Output DC Power 

Supply, W/GPIB/Rs 90 -( 6V, 

5A 0 - +/-25V, 1A) 



'E3632A' Power Supply Unit (0 

- 15V, 7A / 0 - 30V, 4A) 

1468 A Tti 'EX354D' Dual Power 

Supply 280W (35V, 4A) 


1470 A Tti 'EL302D' Dual O/P Power 

Supply (30V, 2A) S/n 134950 

1471 A Thermoelectric Devices 

'EPD9300' Power Supply Unit 

S/n D93000074 

1472 A Thermoelectric Devices 

'EPD9300' Power Supply S/n 

D93000073 

1473 A Thurlby Thandar 'PL330TP' 

Triple Output Power Supply 

Unit (32V, 3A - 32V, 3A - 5V, 

7A) 


1476 A Thurlby Thandar 'PL330P' 

Dual Power Supply Unit (32V, 

3A - 32V, 3A) S/n 145542 

1477 A Thurlby Thandar 'PL330DP' 

Dual Power Supply Unit (32V, 

3A - 32V, 3A) 

1478 A Thurlby Thandar 'TS1542S' 

Dual Precision Power Supply 

Unit (15V, 4A - 15V, 4A) S/n 

157994 


1480 A Thurlby Thandar 'PL310' 

Dual Power Supply Unit 

1481 A Thurlby Thandar 'PL320' 

Dual Power Supply Unit 

1482 A Thurlby Thandar 'TS3021S' 

DC Power Supply 

1483 Two Thurlby Thandar DC 

Power Supplies 


1485 Three Thurlby Thandar DC 

Power Supplies 

1486 Two Thurlby Thandar DC 

Power supplies 'PL154' & 

'TS3021S' 

1487 A Farnell Instruments 'LT30-1' 

Dual DC Power Supply (2 X 0 - 

30V, 1A) 


1490 Two Farnell Instruments 'L30A' 

DC Power Supplies 

1491 Two Optosci 'LNP2' 

Photoreceivers 

1492 Three Isotech '1300PSU' 

Power Supply Units 

1493 Two Isotech 'IPS-1125' Power 

Supply Units 

1494 A Hewlett Packard '6236B' 

Triple Output Power Supply 

Unit (32V, 3A - 32V, 3A - 5V, 

7A) 

1495 A Thurlby Thandar 'TG215' 2 

Mhz. Function generator 

1496 A Racal Dana '5001' 

Multimeter 

1497 A Santec 'PEN310' 

Polarisation Extinction Ratio 

Meter 

1498 A Profile 'TED200' 

Temperature Controller 

1499 An LA Techniques 'LA19-01- 

01' Pseudo Random Pulse 

Generator S/n 0646 


1502 A Tti 'TG1010' Function 

Generator S/n 82016 

1503 An Anritsu 'ML910B' Optical 

Power Meter with Two 

'MA9711A' Power Sensors 

1504 A Hewlett Packard '8347A' RF 

Amplifier 100Khz. - 3Ghz. 

1505 An Ando 'AQ2140' Optical 

Multimeter Fitted with 'AQ2733' 

Sensor Unit S/n 70557324


'34401A' Digital Multimeter, 6.5 

Digit 



Lightwave Multimeter 

Mainframe fitted with 

'HP81533B' Optical Head 

Interface Unit and 81521B 

Optical Head 




'HP81531A' Power Sensor Unit 










'83430A' Lightwave Source - 

1550 nm S/n us36400557 

1515 A Hewlett Packard Optical 

Power Meter with Two 

'HP81525A' Power Heads 


'3458A' Digital Multimeter, 8.5 

Digit S/n 2823A26360 


Digital Multimeter, 8.5 Digit S/n 

2823A24147 


1519 Three Hewlett Packard Optical 

Power Heads (81521B, 2x 

81524A) 


Optical Power Head 


'81624A' Optical Power Head 


'81625B' Optical Power Head 







1527 Two Optosci 'PNP-2' Low 

Noise Photoreceivers S/n 

50241 


'8164A' Lightwave 

Measurement System 


'81640A' Tunable Laser 

Module, Low SSE, 1600nm 

and Four '81635A' Dual 

Channel Power Sensor 

Modules 






'81640A' Tunable Laser 

Module, Low SSE, 1600nm 

and One '81635A' Dual 

Channel Power Sensor 

Module 




Mainframe S/n DE40707107 

fitted with '81640A' Tunable 

Laser Module, Low SSE, 

1600nm and One '81618A' 

Interface Unit 




Mainframe S/n De40704853 



1600nm and One '81635A' 

Dual Channel Power Sensor 

Module 




Mainframe S/n DE38702296 


Laser Module, and One 

'81635A' Dual Channel 

Power Sensor Module 




Mainframe S/n De38701816 



1550nm 

1535 - 1536 Blank Lot


Pulse / Pattern Generator 

400/660Mhz 

1538 An Exfo 'LTS-3902X-BR2BL' 

Loss Test Set S/n 56416-2D 

1539 - 1544 Blank Lot 

1545 A Profile 'LDC1000' Laser 

Diode Controller Mainframe 

fitted with 'TED1020' TE 

Controller, 'LDC1002' LD 

Controller,' LDC1005' LD 

Controller and 'PDA 1000' 

Power Meter 



S/n 7001 fitted with 'LDC1002' 

LD Controller, Two 'PDA1000' 

Power Meters, 'Two Laser 

sources (1310 & 1550) 



fitted with LD/TE Controller, 

Two 'PDA1000' Power Meters 

& Two Laser sources (1300 & 

1550) 



S/n 04202 fitted with 

'TED1020' TE Controller, 

'LDC1002' LD Controller,' 

LDC1005' LD Controller and 

Two 'PDA 1000' Power Meter 



S/n 6202 

1550 An ILX Lightwave 'LDC-3714B' 

Laser Diode Controller 


1552 An ILX Lightwave 'LDC-3900' 

Laser Diode Controller S/n 

39002369 


1554 A Newport '6000' Laser Diode 



1556 An E-Tek 'DLDC-1002' Digital 

Laser Diode Controller 

1557 An ILX Lightwave 'LDC-3908' 

Laser Diode Controller / 8 

Channel Controller 

1558 A Newport '505' Laser Diode 

Driver S/n 109550501 

1559 An ILX Lightwave 'LDC 200' 

Laser Diode Controller S/n 

01802 

1560 A New Focus '6300' Tunable 

Laser Controller S/n 303 

1561 An ILX Lightwave 'PDA-6424' 

Photodiode Amplifier S/n 

64241181 

1562 A Micron Optics 'FFP-C' Fabry 

Perot Controller S/n 772 

1563 A BCP '400A' Laser 

Transmitter 


1565 An Anritsu 'MG9638A' Tunable 

Laser Source S/n 6100094283 

1566 An Anritsu 'EF111A' Call 

Simulator 

1567 A Lecroy '9362C' 1.5Ghz Two 

Channel Oscilloscope 10GSs 

1568 A Tektronix '7854' Modular 

Oscilloscope fitted with '7A19' 

Amplifier, 'AM-6565U' 

Amplifier, Timbase and '7B92' 

Dual Timebase 

1569 A Tektronix '7904a' 

Oscilloscope fitted with '7A26' 

Dual Trace Amplifier, '7A29' 

Amplifier, '7B10' Timebase and 

'7B92A' Dual Time Timebase 

on Wheeled Trolley 

1570 A Tektronix 'TDS 210' Two 

Channel Digital Real Time 

Oscilloscope 

1571 - 1572 Blank Lot 

1573 A Tektronix '576' Curve Tracer 

1574 A Hewlett Packard '11713a' 

Attenuator / Switch Driver 

1575 An Anritsu 'MS9602A' 

Linewidth Analyser 


1577 A Malvern 'MPC3106' Laser 

Particle Counter 

1578 A Hewlett Packard '4140B' pA 

Meter / DC Voltage Source 


Programmable Pulse 

Generator

1580 An Advantest 'TR4131' 

Spectrum Analyser 

1581 An Anritsu 'MS2601A' 

Spectrum Analyser 9KHz. - 

2.2GHz. 

1582 A Hewlett Packard '8566b' 

Spectrum Analyser 


'86142B' Optical Spectrum 

Analyser S/n Us40462112 


Optical Spectrum Analyser 

S/n Us38380750 


1588 A Hewlett Packard 'E5574A' 

Optical Loss Analyser S/n 

3515G00293 



Polarization Controller S/n 

3425G00325 




Communications Performance 

Analyser Opt. 130 A3D A3R 

S/n GB0003145 


Communications Performance 

Analyser 

1597 A Hewlett Packard '8753E' 

Network Analyser 30Khz - 

6Ghz (Opt. 006) 

1598 A Agilent Technologies '8509C' 

Lightwave Polarisation 

Analyser (No Controller) S/n 

us41100213 



Lightwave Communications 

Analyser 


Lightwave Communications 

Analyser 

1602 A DBM Optics '2004' Optical 

Component Spectrum 

Analyser S/n 02-CSA33003- 

04-7 with Gould '46-10355- 

14-04131' 4 Channel VOA 

Rig 

1603 A DBM Optics '2004' Optical 

Component Spectrum 

Analyser S/n 02-CSA33001- 

04-5 




(600 - 1700nm) with HP 

'70004A' Display Unit 



(600 - 1700nm) with HP 

'70004A' Display Unit S/n 

3545A00673 



(600 - 1700nm) with HP 

'70004A' Display Unit S/n 

3615A00689 


Semiconductor Parameter 

Analyser S/n 2149J00373 

1609 An Anritsu 'ME522A' Error 

Rate Measurement Transmitter 


1611 AN AGILENT 

TECHNOLOGIES '86037C' 

CHROMATIC DISPERSION 

TEST SOLUTION OPT. 001 

112 230 COMPRISING 

'8753ES' NETWORK 

ANALYSER, '83427A' CD 

TEST SET, '86120C' 

WAVEMETER, '8164A' 

LIGHTWAVE 

MEASUREMENT SYSTEM, 

SYSTEM CONTROLLER, 

POLARISATION ANALYSER 

AND TFT MONITOR S/n 

US38520327 (2000) 

1612 A Tektronix 'DG2030' Data 

Generator 400 Mbps S/n 

J300217 

1613 A '83480A' Digital 

Communications Analyser 

Fitted with HP '83481A' Optical 

/ Electrical Module 155/622 

Mb/S 

1614 An Ando 'AQ6002' Side Mode 

Measuring Unit 


Switch / Control Unit



Multichannel System fitted 

with Seventeen '81635A' 

Dual Channel Power 

Sensors 




Multichannel System fitted 

with Eight '81635A' Dual 

Channel Power Sensors 

1620 A Profile 'PRO8000' Modular 

Controller S/n 23103 fitted with 

Four 'MLC8200AG' Multi LD 

Controllers and Four 

'LDC8010' LD Controllers 



Eight 'LDC8005' LD Controllers 



Eight 'LDC8002' LD Controllers 



Four 'LDC8002' LD Controllers 

and Three 'TED8020' TE 

Controllers 


Controller fitted with Five 

'TED8040' and One 'TED8040 

PT100' TE Controllers 


Controller fitted with Six 

'TED8040 PT 100' TE 

Controllers 



Six Laser Sources (1310, 

1500, 1550, 1565, 1366 & 

1268nm) 


Controller fitted with Three 

'TED8040' and Three 

'TED8020' TE Controllers 



Four 'TED 8040 PT100', Two 

'TED 8040' and Two 

'TED8020' TE Controllers 



Five 'MLC8200CG Multi- 

Channel Laser Diode 

Controllers 


Controller fitted with Six 'TED 

8040 PT 100' TE Controllers 


Controller fitted with Four 

'LDC8005' Laser Diode 

Controllers and One 'TED 

8040' TE Controller 



Controller fitted with Six 'TED 

8040 PT 100' TE Controllers 



Four 'TED 8040' TE 

Controllers and One 'MLC 

8200 AG' Multi LD Controller 



Three 'TED 8040' TE 

Controllers 



Three Multichannel Laser 

Diode Controllers 


Controller fitted with Two 'TED 

8040' TE Controllers 



Three 'LDC 8005' LD 

Controllers 



One 'MLC 8200 AG' Multi LD 

Controllers and One 'MLC 

8200 CG' Multi LD Controllers 



One 'MLC 8200 AG' Multi LD 

Controller and One 'TED 8040' 

TE Controller 


Controller fitted with Two 'TED 

8040' TE Controllers

1642 A Profile 'PRO 800' Laser 


S/n 30202 fitted with One 'MLC 

8200' and One 'MLC 8200 AG' 

Multi LD Controllers 


'SC1C10641+27XF000FP' 

Programmable SC Series 

fibreoptic Switch S/n 

ED108087 


'SC1C11201+27XF000FA' 



GD079069 


'SC1C10641+27XF000FP' 



Ed108087 



'SC1C10981+27XF000FA' 



HF004471 


'SC1C10641+27XF000FP' 



GD074364 

1650 A JDS Fitel 'SC0238-Z000219' 

Optical Switch S/n B7B0331 

1651 A JDS Fitel 'SC16B5- 

C1NC/SC12B3-00FP-150' 

Optical Switch S/n 

B6HO601/854 

1652 A Bookham Awg 64 Channel 

Fast Test Interface 


1655 A Keithley '7002' Switch 

System Mainframe S/n 781493 



fitted with Four '7011-C Quad 

1X10' Multiplexer and One 

''7012C' 4X10 Matrix Cards 



1658 A Dicon 'GP700' General 

Purpose fibreoptic Switch S/n 

18D100000774 



'N1068B' Optical Switch S/n 

US39000005 

1664 An Opto-Speed 'V4-02' 

Broadband Lightsource S/n 

1651-509 


1671 A Burleigh 'WA-1100' 

Wavemeter S/n 0015390 

1672 Five Wavelength Electronics 

'LFI-3751' Temperature 

Controllers (5 Amp - 40 Watt) 

1673 Four Wavelength Electronics 

'LFI-3751' Temperature 

Controllers (5 Amp - 40 Watt) 

S/n E0EB4997 

1674 A Photonetics 'WALICS HR-15' 

Multiwavelength Analyser S/n 

11-092 


1676 A Photonetics '3642CR00' 

Wavelength Tunable Laser 

Diode Source S/n 10874 


1678 A Photonetics '3688-PR-13' 

Lefevre's Loops S/n 10-053 

1679 A Photonetics '3688-PR-15' 

Lefevre's Loops S/n 10-052 



1684 A Photonetics '3642HE-15' 

Tunable Laser Source Tunics 

1550 S/n 101238 

1685 An RS 'AM-4201' Anemometer 

with Vane Probe 

1686 An Drager 'Accuro' Technical 

Gas Analyser 

1687 An Airflow 'LCA 6000VT' Hand 

Held Anemometer S/n 106688 

1688 An Efos 'N2001 A 1 ' Novacure 

UV Lightsource with 

Waveguide 

1689 Seven Efos UV Light Guides 

1690 AN EIT 'UV Power Puck' High 

Energy UV Radiometer 

1691 An EIT 'SP1-365-EIT' Spot 

Cure Intensity Meter

1692 An LTH Electronics 'Aquacal 

2000' Conductivity Meter in 

Carrying Case 

1693 A Mettler Toledo 'MC126' 

Conductivity Meter 

1694 A Hanna 'HI98804' KJT 

Printing Thermometer & 

'PL200' Relative Humidity 

Printer/Logger 

1695 A Bell '4048' Hand Held 

Gauss/Tesla Meter 

1696 An MKS PR4000', '943' 

Gauges with Controllers & A 

Mass Flow Controller 

1697 A Precisa 'XT220A' Laboratory 

Scale 

1698 A Scout 'SC4010' 400 x 0.1g 

Digital Readout Scale 

1699 A Stag Programmers 'SE2T' 

UV Eraser 

1700 A Sato 'CL412' Label Printer 


1703 A Sato 'CL412E' Label Printer 

1704 A Zebra '105SE' Label Printer 

1705 A Zebra 'Z140LMV' Label 

Printer 

1706 - 1714 Blank Lot 

1715 An AFC Technologies 

'BBS1550' Broadband 

Lightsource S/n Bs533 


1725 An AFC Technologies 'BBS 

1550A TS' Broadband 

Lightsource 


1729 An AFC Technologies 

'BB1590' Broadband 

Lightsource 


1731 A Highwave 'HWT-L-BS-B1-2- 

APC' Dual Output Erbium 

Doped fibre Broadband Source 

S/n 4669901 

1732 A Thorlabs 'ASE-FL7002-C4' 

Broadband Lightsource 1.53 - 

1.61 Um S/n 110721 



Broadband Lightsource 

1735 An Electrophotonics 

Corporation 'BLS1550' 

Broadband Lightsource 


1743 A Solent Semiconductors 

Temperature Controller 


1745 An EG & G '7265' DSP Lock In 

Amplifier S/n BE11510 

1746 An EG & G '7260' DSP Lock In 

Amplifier S/n Ir13003 

1747 A Fiberpro 'PS-155-A' fibre 

Optic Polarisation Scrambler 

S/n esm0051001 


1751 An Exfo 'IQ-206' Expansion 

Unit fitted with 'IQ-9100' 32 

Way Optical Switch 



Unit fitted with 'IQ-9100' 24 

Way Optical Switch 



Unit fitted with 'IQ-9100' 8 Way 

Optical Switch 


Unit fitted with 'IQ-9100' 8 Way 

Optical Switch, Two 'IQ-2100' 

Laser Sources (1550 & 1310), 

One 'IQ-3200' Return Loss 

Meter and One 'IQ-5100' 

Polarization Controller 


Unit fitted with Two 'IQ-2100' 

Laser Sources (1550 & 1310), 

One 'IQ-1200' Four Channel 

Power Meter 


Unit fitted with 'IQ-2600B' 

Tuneable Laser Source, 'IQ- 

3100 Variable Attenuator,'IQ- 

2100' Laser Source and Two 

'IQ-9601' Utility Single Modules


Unit fitted with 'IQ-2600B' 

Tuneable Laser Source, and 

Two 'IQ-9601' Utility Single 

Modules 


Unit S/n 87284-2V 

1762 An Environics 'SERIES 4040' 

Gas Dilution System Controller 

1763 A Ram Optical Instrumentation 

'1100' Cross-Hair Generator 

S/n 2080 

1764 A Brimcom 'GFF-C-8-RM' 

Dynamic Gain Flattener 

1765 A Neos 'N21027-1AS' Driver 

Unit S/n 9908 

1766 A Thorlabs 'MC1000' Optical 

Chopper S/n (NSN) 

1767 A Profile 'LDT DIL' Laser Diode 

Tester S/n 980651 

1768 Three Javelin 'JV SERIES' 

Video Units 

1769 A JDS Uniphase '1677' Laser 

with Power Supply S/n 

1237818 

1770 A Melles Griot '05-LGR-193- 

381' Laser Unit with Power 

Supply S/n 8546EB 

1771 Two OTC '1300SM' Stabilised 

Laser Sources (1300nm) 

1772 A Photon Inc 'LD8900R/IR' 

Goniometric Radiometer 


1774 A Simco '4007005' Ionising Air 

Gun (Unused) 

1775 A Simco '4005106' Ionising Air 

Gun 

1776 Two 3M '961E' Ionisers 

1777 An Iostat Technology '6115' 

Ionising Blow off Gun 


1782 An 3M '980' Ionising Blow off 

Gun 

1783 An Iostat Technology '6115' 

Ionising Blow off Gun 

1784 Two Exfo 'FOT20A' Fibre Optic 

Testers 


1789 An Exfo 'BRT-320A' Return 

Loss Meter In Case with 

Optical Variable Attenuator S/n 

107395-32 

1790 Five RS '206-3722' 

Temperature Meters (K Type) 

S/n 93103898 

1791 Three Barber Insys 'P505' 

Assorted Thermometers. 

Barber Insys 'P505' with 

'26EEFFB8' & '271AFFDB' 

Probes, Rs '123-901' & 

Solomat 'MPM500E' 

1792 Four Rifocs '265A' 1310nm 

Laser Sources 

1793 A Stuart Scientific 'SH2D' 

Hotplate S/n R000100204 


1799 A Prazitherm 'PZ34' Hotplate 


1801 Four Hotplates Various 

1802 Three Hotplates Various S/n 

N01442 

1803 A Weller 'WHP300' Hotplate 

with Controller 

1804 A Fibertron '9560' Multi-Cure 

Oven 

1805 A Clifton Unstirred Heated 

Bath S/n 41694 

1806 A Buehler '75-2002-220' Sonic 

Cleaner S/n 546-C2B-00246 

1807 A Grant 'SUB 6' Heated Bath 

1808 A Clifton Heated Bath 

1809 A Martin Walker 'Powersonic' 

Heated Bath 

1810 An Ultrawave Ltd 'U400' 

Ultrasonic Bath 


1812 A Kemesonic 'U400' Ultrasonic 

Bath 

1813 A Dawe '6442AE' Ultrasonic 

Bath 

1814 A Heraeus 'B15' Heated 

Enclosure 

1815 A Weller 'DS801' Desoldering 

Station 

1816 A Similar Lot

1817 Two Weller Temperature 

Controlled Soldering Irons 

Various 

1818 An Advanced JBC Soldering 

Station & An MBT Desoldering 

Station 

1819 An EFD '1500DV' Resin 

Dispenser with Two Foot 

Pedals S/n 703906T 


1821 A Techon 'TS9150E' Resin 

Dispenser with Foot Pedal S/n 

28394 


1823 A Fishman '8300' Resin 

Dispenser with Foot Pedal 

1824 An OK Industries 'FD1000' 

Fluid Dispenser S/n 1132 

1825 An OK Industries 'VP-160' 

Vacuum Pickup Pencil 


1827 A Metcal 'SP PW1-20' 

Soldering Station with Iron and 

Holder 


1831 A Metcal 'MX-500P-21' 

Soldering Station with Iron and 

Holder 

1832 A Pace 'ST 25' Temperature 

Controlled Soldering Iron 

1833 A Weller 'WECP-82' 

Temperature Controlled 

Soldering Iron 

1834 A Xytronic 'EZ Tweez 526' 

Temperature Controlled SMD 

Rework Tweezer S/n 00152 

1835 A Magnaflux 'ZB 100F' Hand 

Held Uv Lamp with Power 

Supply 

1836 A Wafer Inspection Lamp 

1837 A Spectroline 'SB-100PY/FB' 

Wafer Inspection Lamp 

1838 A Heat Gun and Pneumatic 

Applicator 

1839 A Charleswater '92322' 

Desktop Ioniser 

1840 Four Adjustable Illuminated 

Magnifiers 

1841 A Neuberger 'N 035.1.2.AN.18' 

Vacuum Pump 

1842 A Gast 'DOA-V110-BN' 

Vacuum Pump 

1843 A Neuberger 'PM 16344-840' 

Vacuum Pump 

1844 A Neuberger 'PM16209-022' 

Vacuum Pump 


1847 A Neuberger 'N 022 AN .18' 

Vacuum Pump 


1851 A Neuberger 'N840.3FT.18' 

and A 'VP1HV' Vacuum Pump 

1852 Ten GPIB Cables 


1870 A Quantity of Assorted Cables 


1873 Two Convac '3000P' Portable 

Computer Cleaners 

1874 A Neslab 'FTC-350A' Flow 

Through Cooler 

1875 A Melcor 'MLA270-DH1_230' 

ThermoElectric Recirculating 

Chiller 

1876 An RS 'PFI200N' Portable 

Force Indicator, A Metric Tap & 

Die Set & Two Dial Force 

Indicators 

1877 A Metcal 'BVX-100' Solder 

Fume Extraction System 

1878 Three Pressure Chambers 

1879 A Pace 'ARM EVAC 200' 

Fume Extractor 


1881 A ENI 'OEM - 12B' RF 

Generator 

1882 A Quantity of Electronic Test 

Equipment as Lotted 


1886 Two Bonders For Spares 

1887 - 1894 Blank Lot

LOTS 1895 TO 1899 ARE 

LOCATED IN STORAGE IN 

OTTAWA 

1895 Trikon 'Omega' Mori Etcher 

fitted with A Cooled 

Electrostatic Chuck. Used as 

a Single Chamber Mori ICP 

Etcher, Configured For High 

Rate, Uniform Etching of a 

Variety of Substrate 

Materials. (Cassette To 

Cassette For 3" Wafers 

Although It Can Be Modified 

For Up To 8" Wafer 

Processing). The Machine 

Has The Option To Use 

Optical Interferometry. With 

a Trikon End Point Detector, 

Podule Down Stream 

Descum Chamber. Currently 

Configured For Etching of III- 

V Materials on Indium 

Phosphide Wafers, with 

Gases CF4, C4F8, CH2F2, 

CO, N2, O2, But Could Be 

Used For Silicon or GaAs. 

Complete with Three Ebara 

Dry Pumps ('A10S', 'A25S' & 

'A70S'), Neslab Coolflow 

System 2 Liquid Recirculator 

and BOC Edwards TCU 40/80 

1896 Trikon 'Delta PECVD Turbo' 

The Tool Is Configured For 

Nitride and Oxide Thin Film 

Deposition (Cassette To 

Cassette For 3", Can Be 

Modified For Up To 6" Wafer 

Processing). Currently Used 

For Depositing Thin Films on 

InP and GaAs Wafers, with 

MFC'S For Gases O2, N2O 

CF4 NH3 20%SiH4. The 

Machine Could Be Used For 

Processing Si Wafers. 

Complete with Ebara A150W- 

M Scrubber /Pump System, 

Ebara A10S Dry Pump and 

Neslab Coolflow 2 Liquid 

Recirculator 


1898 Philips 'DCD PRO' Double 

Crystal Diffractometer, Fully 

Auto Wafer Mapper For 

Layer Thickness 

Composition. Structural 

Analysis of InP GaAs 

Epitaxial Layers. 

1899 Philips 'PLM 150' 

Photoluminescence Mapper 

Frequencies, 532, 633 and 

1064Nm S/n EZ000623 Note:- 

This Tool Is Located In 

Ottawa Canada, Has Been 

Removed From Cleanroom 

and Is Currently In Storage 

1900 - 1909 Blank Lot 

WAFER FABRICATION 

EQUIPMENT BUILDING 103A 

NOTE:- ALL EQUIPMENT 

EXCLUDES EXTERNAL 

VACUUM PUMPS 

1910 JOEL 'JWS-7557' SCANNING 

ELECTRON MICROSCOPE 

CONFIGURED FOR 6 INCH 

WAFERS. RESOLUTION 5 

NM. AT 1KV ACCV. 

CAPABLE OF 

REPRODUCIBILITY OF LESS 

THAN 50NM. ON LESS THAN 

4UM. FEATURES. CAPABLE 

UNDER PROGRAMME 

CONTROL OF PERFORMING 

MULTI SITE, THETA 

SELECTABLE, AUTOMATIC 

MEASUREMENT OF RIDGE 

AND WAVEGUIDE 

FEATURES WITHIN AN 

ACCURACY OF 1%. S/n 

WS171001-3 (2001) 

1911 Schlumberger 'IVS-120' 

Automatic Metrology System 

Configured for 6 inch Wafers 

For accurate Measurement 

of Registration Features, 

Critical Dimensions and 

Contact Holes Measurement. 

S/n 120951002 With system 

unit and Mitsubishi Video 

Copy Processor 

1912 AIO Corporation 

'8626/36/32MD-DD' Dual 

Wafer Track 6 inch Positive 

Resist (Configured for 

Index/hmds/cool/coat/hpo/inde 

x) and 6 inch Positive Develop 

(Configured for 

index/hpo/cool/devope/hpo/ind 

ex). Temperature Control For 

Develop Fitted

1913 AIO Corporation Dual Wafer 

Track. Two Positive Resist 

Modules Both Configured for 

index/hmds/cool/coat/hpo/inde 

x 

1914 - 1915 Blank Lot 

1916 APPLIED MATERIALS 'U- 

620' METROLOGY CD-SEM 

WITH SIDE WALL IMAGING 

TECHNOLOGY FOR SLOPE 

AND PROFILE CONTROL. 

SET FOR 6 INCH WAFERS 

CAPABLE OF RUNNING 55 

WAFERS PER HOUR AT 5 

SITES PER WAFER. (2002) 

1917 ASML 'HTR+' 6 Inch 

Projection Aligner with 

Motorised Carousel Arm, 

Advanced Interface For 

Micralign, Programmable 

Signal Tower, Automatic 

Fine Alignment and Narrow 

Band Secondary Mirror For 

Improved UV-4 

Transmission. (Refurbished 

2002) S/n 64263R 

1918 Tencor '7700M 26913' 

Patterned Wafer Inspection 

System Set Up For 6 inch 

Wafers S/n 0495-511M 

1919 Nikon 'Optisation -V' Wafer 

Inspection System with Twin 

Front Loading Wafer Carriers 

and CF Infinity Corrected 

Optical System. Microscope 

Fitted with Five CF Plan 

Objectives (5X, 10X, 20X, 50X 

& Cf Plan Apo100X) and JVC 

‘TK-C1381’ Video Camera 

(2000) 

1920 Nikon 'Optisation -V' Wafer 

Inspection System with Twin 

Front Loading Wafer Carriers 

and CF Infinity Corrected 

Optical System. Complete with 

Fitted Nikon ‘CFH200-Z’ 

Confocal Module Microscope 

Fitted with Five CF Plan 

Objectives (5X, 10X, 20X, 50X 

& Cf Plan Apo100X) and JVC 

‘Tk-C1381’ Video Camera. 

(1997) 

1921 Olympus 'MX50 + AL100 ' 

Auto Loader Scope 

Inspection System with 

Automatic Wafer Transfer 

(WED). Set Up To Handle 6 

inch Wafers with JVC 

Camera, Sony Monitor and 

Mitsubishi Colour Video 

Copy Processor 

1922 Varian '3290' Sputter Tool 

Used For Al, TiW & Au (Au Is 

a Quantum Source). 

Currently Configured For 4 

inch Wafers. Including 

Additional Shielding and 

Spares 

1923 Tencor 'RS75' Resistivity 

Mapping System S/n 

970712RS75 

1924 NANOMETRICS 'NANOSPEC 

8000X' FILM THICKNESS 

ANALYSER. DUAL STATION, 

CAPABLE OF RUNNING 

WAFERS FROM 3 TO 8 INCH 

S/n I8000X-1201-0236 (2001) 

1925 Tencor 'Surfscan 5500' Particle 

Measurement System. Dual 

Cassette. Capable of Running 

4 and 6 inch Wafers S/n 094 

1926 Plasma Technology 'PRS801' 

Barrel Etcher / Resist Stripper 

S/n 3A32739 

1927 APPLIED MATERIALS 

'CENTURA' DUAL EMXP 

CHAMBER OXIDE ETCH 

TOOL (CHAMBERS IN 

POSITIONS A & C) 


WAFERS. COMPRISING 

CENTRAL TRANSFER 

CHAMBER, WAFER 

ORIENTATION CHAMBER 

AND TWO PROCESS 

CHAMBERS. S/n 580 (2001) 

WITH TWO NESLAB 'AMAT 

HX+150W' RECIRCULATING 

CHILLERS AND A QUANTITY 

OF SPARES

1928 SURFACE TECHNOLOGY 

SYSTEMS A TWIN 

CHAMBER CLUSTER TOOL 


WAFERS. ONE CHAMBER 

FOR STANDARD ETCH, ONE 

FOR HIGH RATE ETCH. 

BOTH CHAMBERS ARE 

FITTED WITH 

INTELLIMETRICS ENDPOINT 

SYSTEMS CHAMBER 1 

FITTED WITH LEYBOLD 

‘MAG900CT’ TURBO PUMP. 

CHAMBER 2 FITTED WITH 

LEYBOLD ‘ MAG2000CT’ 

TURBO PUMP CONTROL 

RACKS WITH POWER 

SUPPLIES AND TURBO 

CONTROLLERS TWO 

PHOTONETICS ‘TUNICS 

PLUS’ TUNABLE EXTERNAL 

CAVITY LASERS (1520NM. 

2W & 5W).TWO 

INTELLIMETRICS ‘LEP300 

SERIES’ PC UNITS HUBER 

UNISTAT ‘140W’ CHILLER 

(2001) 

1929 APPLIED 'PRECISION 5000 

MKII' MAINFRAME UNIT 

FITTED WITH TWO 

PROCESS CHAMBERS 

(FACILITY FOR FITTING 

TWO MORE CHAMBERS) 

ATTACHED TO A CENTRAL 

LOADLOCK CHAMBER 

THAT CONTAINS THE 

WAFER TRANSFER ROBOT 

THE PROCESS CHAMBERS 

ARE CURRENTLY 

CONFIGURED FOR DXZ 

NITRIDE/OXIDE 

DEPOSITION. INCLUDING 

TWO DUAL GAS CABINETS 

ONE FOR SILANE AND 

NITROGEN PURGE AND 

ONE FOR AMMONIA AND 

NITROGEN PURGE (2001) 

1930 ALCATEL '601E' 6 INCH 

MANUALLY LOADED 

SINGLE PLATE TYPE 

SILICON ETCHER FITTED 

WITH INTELLEMETRICS 

ENDPOINT SYSTEM. S/n 63- 

05-01 (2001) WITH , MGE 

UPS, NESLAB ‘RTE-300’ 

CHILLER, VARIOUS SPARES 

AND CONSUMABLES 

1931 TOKYO ELECTRON LTD. 

'ECLIPSE MARK IV' 6 INCH 

PHYSICAL VAPOUR 

DEPOSITION SYSTEM 

CONFIGURED WITH AN 

ATMOSPHERIC WAFER 

HANDLER MODULE 

COUPLED TO A 

VERTICALLY ORIENTATED 

PLENUM ASSEMBLY 

HOUSING FOUR 

CHAMBERS. ONE 

CURRENTLY USED FOR 

TUNGSTEN, ONE FOR GOLD 

AND TWO UNUSED(UNUSED 

CHAMBERS ARE NOT 

FITTED WITH SPUTTERING 

HARDWARE). FULLY 

INTEGRATED CTI ONBOARD 

FAST REGEN CRYOPUMPS 

WITH COMPRESSORS 

REMOTE TERMINAL 

INCLUDED. S/n S80 (2001) 

1932 Tepla '300 Autoload PC' 

Asher Capable of Running 4 

and 6 inch Wafers. Spares 

included with Machine S/n 

1364 

1933 MATRIX INTEGRATED 

SYSTEMS INC. '208S LTC' 

‘BOBCAT’ ADVANCED 

SINGLE WAFER 

PHOTORESIST ASHING / 

ETCHING SYSTEM. FOR 4 

AND 6 INCH WAFERS. 

SINGLE WAFER, SINGLE 

CHAMBER WITH 

INTEGRATED WAFER 

COOLING STATION. S/n 

10210 (2000) WITH FORMING 

GAS CABINET AND BETTA- 

TECH 'CU700' CHILLER 

1934 KLA-Tencor 'P 22' Cassette 

To Cassette Automated 

Surface Profiler Capable of 

Running 4 and 6 Inch 

Wafers. (2001)


SYSTEMS 'MESC 

MULTIPLEX RIE' REACTIVE 

ION ETCHING SYSTEM 

DESIGNED FOR DEEP 

TRENCH ETCHING OF 6 

INCH WAFERS. THE 

SYSTEM CONSISTS OF RIE 

ELECTRONICS, LOADLOCK, 

WAFER LOADER AND 

PROCESS CHAMBER. S/n 

3642 (2001) WITH PC 

CONTROL SYSTEM, POWER 

DISTRIBUTION CABINET 

WITH PROCESS CHAMBER 

ELECTRONICS, LOADLOCK 

CABINET, LOADLOCK AND 

WAFER LOADER, PROCESS 

CHAMBER, RF STACK, 

REMOTE GAS BOX. 

VACUUM SYSTEM:- 

ONBOARD PFEIFFER 

‘TPH521 PC’ TURBO PUMP. 

TWO BETTA-TECH 

CHILLERS 

1936 Semco Four Tube Furnace 

Stack. Tubes 1 & 2 Wet/Dry 

Oxidation. Tube 3 Sinter. Tube 

4 Wet/Dry Oxidation. Oxidation 

Tubes Have Bubbler 

Equipment Installed For Tube 

Cleaning. All Tubes Are 

Capable of Running Wafers Up 

To 6 inch 

1937 Semco Four Tube Furnace 

Stack. Tubes 1 & 2 Wet/Dry 

Oxidation. Tube 3 Not 

Currently Used. Tube 4 

LPCVD Nitride. Oxidation 

Tubes Have Bubbler 

Equipment Installed For Tube 

Cleaning. All Tubes Are 

Capable of Running Wafers Up 

To 6 inch 

1938 Biorad 'QS-2200' FTIR Film 

Thickness Measurement Tool 

S/n 41020 (1998) with Betta - 

Tech 'CU400' Chiller 

1939 Semitool 'W/PSC-102' Dual 

Stack Spin Rinser / Dryer 

Fitted with 6 inch Rotors 


1944 Semitool 

'SAT2080S(CA2P)CBE' Spray 

Acid Tool with Jigging For 4 

and 6 inch Wafers and Some 

Consignment Spares S/n 

G177683 (2001) 

1945 LUMONICS 'WMSDCS' 

SIGMA DCS WAFERMARK 

LASER SCRIBER 

CURRENTLY RUNNING 4 

AND 6 INCH WAFERS S/n 

2033711 (37268) 

1946 Lancer '1600UP' Stainless 

Steel Box Washer S/n 

1G010827 (2001) 

1947 Karl Suss 'MA150' 4 inch 

Single Sided Mask Aligner 

S/n 220517 

1948 Karl Suss 'MA150' 4 inch 

Mask Aligner with Back Side 

Alignment with Unused 6 

inch Conversion Kit S/n 

220515 (1997) 

1949 Karl Suss 'MA 56' Mask 

Aligner 

1950 Canon 'PLA-501F' Mask 

Aligner 

1951 Applied Materials '0270-35183' 

Susceptor Levelling Tool (For 

P 5000) in Carrying Case

1952 A LAM '4500 RAINBOW' 

SETUP FOR 4 INCH OXIDE 

REMOVAL TOOL WITH 

208/415 VAC 3 PHASE 

TRANSFORMER, MAINS 

DISTRIBUTION CABINET, 

VACUUM PUMP PURGE 

PANEL, LOADLOCK 

VACUUM PUMP, PROCESS 

VACUUM PUMP, RF 

GENERATOR CART, 

TEMPERATURE CONTROL 

UNIT, GAS REGULATOR 

PANEL, S/N 2252 208VAC 

OPERATION. SINGLE 

WAFER, VACUUM 

LOADLOCKED, LOW 

PRESSURE OXIDE ETCH 

SYSTEM. PICK AND PLACE 

WAFER TRANSPORT 

SYSTEM WITH NON WAFER 

CONTACT OPTICAL 

ALIGNMENT, FLAT 

ORIENTATION. INCLUDES 

AN ENHANCED 

MONOCHROMATOR FOR 

AUTOMATIC ENDPOINT. 

LARGE QUANTITY OF 

SPARES AND 6 INCH 

UPGRADE KIT INCLUDED 

S/n 306404 


SYSTEMS 'STS2' 6 INCH 

MULTIPLEX ETCH SYSTEM 

WITH MACS ROBOT, 

POWER DISTRIBUTION / 

CONTROL RACK, EDWARDS 

QDP PUMP AND EDWARDS 

'40' PUMP (FOR 

LOADLOCK), DI CHILLER 

FOR LOWER ELECTRODE, 

INDUCTIVELY COUPLED 

PLASMA DRY ETCHER 

CONFIGURED FOR SILICON 

ETCH. PROCESS GASES 

C4F8/SF6/02. PICK AND 

PLACE WAFER TRANSFER 

SYSTEM. WAFERS 

ELECTROSTATICALLY 

CLAMPED AND BACKSIDE 

COOLED. DUAL BEAM 

INTELLIMETRICS END 

POINT SYSTEM. (COMES 

WITH FITTINGS REQUIRED 

TO CONVERT TO 4 INCH) 

S/n 10743 

1954 Surface Technology Systems 

'STS2' Multiplex CVD System 

S/n 02741 

1955 Silicon Valley Group 

'8832/8836' Twin 4 inch 

Positive Developer Track. 

Each Track Comprises of 

Single Load Index/ Pre Bake/ 

Cool/ Positive Develop/Post 

Bake/ Unload index 

1956 AIO '8632/36' Twin Wafer 

Track. Track 1 :- HPO Bake 

Stations. Designed for Use 

with Solvent Based Negative 

Developer Solutions 

Progammable Dispense Head 

Position. Track 2 :- HPO Bake 

Stations. Twin Spray and 

Stream Develop Heads. 

Programmable Head Position 

S/n 9680032089 (1999) 

1957 AIO '8626/8636' Twin Wafer 

Track. Positive/Negative Coat 

Resist Track 

1958 An AIO Upgrade System for 

AIO 86 Series Track. Used for 

Cleaning of Photomasks. 2 

Chemical Dispense Nozzles, 

High pressure DI Cleaning 

Head, DI Rinse ,Brush. 


1960 Betta-Tech Controls 'CU750' 

Water Heater / Chiller 

Circulator Unit 

1961 Betta-Tech Controls 'C400' 













1984 Lauda 'RK8 CP' Recirculating 

Chiller 

1985 Best Power Universal Power 

Supply

1986 Windrush Technology 

Cassette To Cassette Wafer 

Transfer and Sorter 

1987 Emitech 'K650TB' Turbo 

Sputter Coater 

1988 Mks Instruments Residual Gas 

Analyser 

1989 Mactronics 'Eureka' Wafer 

Loader 

1990 Mactronics 'L2625E' Wafer 

Transfer Machine 

1991 Lamarflow Furnace Tube 

Cabinet 

1992 Asyst Reticle Loader and 20 

Pods For Use with Asml 

Steppers 


1994 Semiconductor Production 

Systems Wafer Inspection 

System 

1995 H Square Corporation 'AFEZ6' 

Automatic Wafer Aligner 



1998 Rudolph Research '2.4A' Auto 

El Ellipsometer S/n 7402 

1999 Mactronics 'Eureka' Wafer 

Transfer Station 

2000 Jencons 'CR-130(201)' Oven 

Max Temp 250C 


2003 Yes '3E' Oven 

2004 Hitech Furnaces 'HH-6926' 

Bench Furnace with 2-Mfc Gas 

System Max. Temperature 

1100 ºC S/n C1113 (2001) 

2005 Wentworth 'MP1301' Wafer 

Component Probe with Baush 

& Lomb Microscope and Two 

Probe Holders 

2006 - 2019 Blank Lot 

2020 A Ring Engineering Mobile 

Stainless Steel Computer 

Monitoring Station with Pull 

Out Shelves 


2025 A 700 x 600 x 1300mm Double 

Door Stainless Steel Storage 

Unit with Overshelf 

2026 An NTA Industries 1220 x 

760mm Ultraclean Stainless 

Steel Table 


2041 A Campagne 1300 x 770mm 

Stainless Steel Table 


2054 A Campagne 770 x 650mm 



2059 A R.I.N.C. 1840 x 800mm 



770mm Stainless Steel Table 

2061 A R.I.N.C. 1950 x 950mm 

Stainless Steel Table with 

Overshelf 









2067 Two Campagne 1300 x 

770mm Stainless Steel Tables 


2069 A Mobile 2 Tier Plastic Trolley 

2070 A 1500 x 400 x 700mm High 4 

Tier Chrome Storage Unit with 

Dividers 

2071 A 1200 x 300 x 1850mm High 

6 Shelf Chrome Storage Rack 

2072 A 1500 x 450 x 1900mm High 

5 Tier Chrome Storage Rack 


2074 A 1250 x 300 x 1720mm High 


2075 A 1650 x 350 x 1720mm High 


2076 - 2077 Blank Lot 

2078 A 1420 x 300 x 1600 4 Tier 

Stainless Steel Shelf Unit


2083 A R.I.N.C. 1600 x 475 x 

1625mm 5 Tier Stainless Steel 

Pull Out Shelf Unit 


2085 Three 800 x 350 x 750mm 

High 2 Tier Shelf Units 

2086 Three Various Stainless Steel 

Shelf Units 

2087 An Accuseal Pneumatic Jaw 

Vacuum Impulse Sealer (35 x 

1/4 inch) 

2088 - 2096 Blank Lot 

2097 A 1400 x 750 x 2550mm Deep 

Steel Mobile Drum Carrier 


2099 Three Stainless Steel Wafer 

Transfer Stations 


2102 A Drager 'PPM B00067' Wall 

mounted Emergency Breathing 

Apparatus 


2106 - 2119 Blank Lot 

DICING AND POLISHING 

EQUIPMENT BUILDING 103C 

POLISHING ROOM 

2120 A DISCO 'DFD641' FULLY 

AUTOMATIC DICING SAW 

2121 A Loadpoint 'Microace 3AV' 

Dicing and Scribing Machine 

2122 A Loadpoint Wash Station 

2123 A Plasma Technology 

'OPTRIE 80' RIE Etcher with 

'HF-300' power supply 

2124 A Plasma Technology 

'OPTRIE 80' RIE Etcher (No 

Power Supply) 

2125 A Logitech 'LP50' Lapper 

Polisher S/n 66-01-00 


2131 A Logitech Polishing Jig 


2145 A Quantity of Logitech Sample 

Monitors and Jig Components 

2146 Three Thickness Gauges 

2147 An Allied '10-1000-230' 

Polisher S/n 545-230 

2148 A Logitech 'GI 20' Flatness 


2149 A Logitech 'L110' 

Interferometer 

2150 A Struers 'Labopol-21' Grinder 

/ Polisher 

2151 A Buehler 'Ecomet 3' Variable 

Speed Grinder / Polisher 

2152 Seven Logitech 127mm 

Diameter Steel Conditioning 

Rings 

2153 Six Logitech Grooved Cast 

Iron Test Blocks 

2154 Six Logitech 200 Micron 

Diamond Smoothing Blocks 

2155 Eight Logitech 1SDG1' Single 

Dial Gauges 

2156 Seven Logitech 35cm Lapping 

/ Polishing Plates 

2157 A Logitech 1ACCS-0005' 

Standard Loading Weight 

2158 A Logitech Autofeed Cylinder 

2159 Four Logitech 35cm Lapping / 

Polishing Plates 

2160 Two Logitech Rotary Vacuum 

Adapters 

2161 A Logitech Granite Master Flat 

2162 A Watson Marlow '505S' 

Perestaltic Pump 


2168 A Laurell 'WS-400A-6NPP/lite' 

Spinners 


2170 A Laurell 'WS-400A-6TFM/lite' 

Spinners 

2171 Two Logitech 'LS5000' Scales 

2172 Two Ohaus 'CS5000' Scales 

2173 An IKA 'R103 ST80 IV' Stirrer 

2174 An SSC '4800' Heated 

Vacuum Wafer Holder, 

Controller and Chuck 


2176 An SSC '4800' Heated 

Vacuum Wafer Holder (No 

Chuck)

2177 Two Glass Standard Plates 

2178 A TWI Stacking Machine 


2180 A Manual Ring Mounting Press 


2182 A USI 'Uh114' Wafer Frame 

Film Applicator 

2183 A Buehler 'Isomet 1000' 

Precision Wafer Saw 

2184 A Betta-Tech Controls 'CU700' 

Heater - Chiller 

2185 An SCS Instruments '500M- 

STD' Ionograph 

2186 A South Bay Technology '590' 

Tripod Polisher 

2187 A Materials Development 

Corporation '490' Quiet Chuck 

DC Controller with Jig and 

Probe Holders 

2188 A Delflex 'DX1001-8' TIG 

Snow Technology 'Micro Snow' 

CO2 Snow Blower 

2189 A Struers Epovac with Air 

Ejector Pump 

2190 A Solitec Developer 

2191 A Karl Suss 'CT62' Spinner In 

Laminar Flow Box 

2192 An Audion Electro 'VM52' 

Vacuum Bag Sealer 

2193 A CEE '100CB' Spin Coater 

with Hotplate Bake System 

2194 A Seiko Instruments 'OFL15' 

Fibre Polisher with Proface 

Digital Display 

2195 A Seikoh 'SFP-550' Fibre 

Polisher 

2196 A Fitel 'S541a' Fibre Recoater 

2197 A Fukikura 'FSM 20PMII' 

Fusion Splicer 


2199 Two Fibre Cleavers 

2200 An Elite Engineering Formette 

Machine 

2201 A Logitech 'LG1' 

Autocollimator 


2204 A Schleuniger '7030' Fibre 

Stripper 

2205 An RS '2014' UV Exposure 

Unit 

2206 An RS '196-5251' UV 

Exposure Unit 

2207 An RS '555-279' UV Exposure 

Unit 

2208 An Air Products Liquid 

Nitrogen Dewar with Wheeled 

Trolley 

2209 A Divac Vacuum Flask 

2210 Two Apache 

'MAWP160/MAWP165' 

Pressure Pots 

2211 A Terra Universal 400 x 400 x 

320mm Dessicator / Dry 

Storage Cabinet & A Stainless 

Steel 380 x 400 x 615mm Dry 

Storage Cabinet 

2212 A 390 x 400 x 460mm 

Stainless Steel Dry Storage 

Box 

2213 A 300 x 300 x 330mm 

Dessicator / Dry Storage 

Cabinet 


2215 A 400 x 400 x 600mm 


Cabinet 


2217 A 400 x 360 x 700mm 


Cabinet 


2219 A 500 x 430 x 600mm 


Cabinet 

2220 A Quantity of Wafer Storage 

Boxes and Accessories 

2221 A Quantity of Polishing 

Clamps, Blocks Etc. 

2222 A Large Quantity of Wafer 

Mounting Equipment 

2223 A NIKON 'NEXIV VM-250' 

CNC VIDEO MEASURING 

SYSTEM 

2224 A Mitutoyo 'PJ-3000' Profile 

Projector


ASSEMBLY EQUIPMENT 

BUILDING 103C 

CLEANROOM 

2227 AN ESEC 'MICRON 2' AUTO 

DIE BONDER WITH 

ASYMTEK MM-FLSU/D-STD 

SMEMA CONNECTING 

INFEED AND OUTFEED 

CONVEYORS WITH WAFER 

LOADERS AND WAFFLE 

PACKS S/n 13257 (1999) 

2228 A KARL SUSS 'FC 250' 

AUTOMATIC DIE BONDER 

S/n 2455 (2001) 

2229 AN ESEC '3088' AUTOMATIC 

WIREBONDER S/n 306404 

(2000) 

2230 A Royce 'DE35' Semi 

automatic Die Sorter S/n 4.77 

- 26NSC with Costar 'CV- 

730NDC Camera 

2231 Delvotek '5430' 

Wedgebonder S/n 30078 

(1998) 

2232 Cammax 'DB600' Die Bonder 

S/n 001533 with Leica MZ6 

Microscope and CLS 150X 

Lightsource 

2233 A DynaPert Precima 'EDB80' 

Manual Die Bonder 

2234 DynaPert Precima Manual Die 

Bonder fitted with Bausch & 

Lomb Microscope 

2235 Dage Precima Manual Die 



2236 DynaPert Precima 'EDB65' 

Manual Die Bonder fitted with 

Bausch & Lomb Microscope 

2237 RUKER & KOLLS '660J' Wafer 

Inspection System with Bausch 

& Lomb 'Microzoom' 

Microscope 

2238 Solent Semiconductor Manual 

Bonder / Glue Dispenser Fitted 

With Leica 'Mz6' Microscope 

Amd Intralux Light Source with 


2239 Three Cammax Precima Die 

Bonders with one 'PPS 60' 

Controller 

2240 An IEC '8-157-02' Semi 

Automatic Die Bonder fitted 

with Bausch & Lomb 

Microscope 

2241 A Kulicke And Soffa '4129' 

Semi Automatic Wedge 



2242 A Manual Scribing Tool with 

Foot Pedal 

2243 Three Dage Precima 

'Microtester 22' Pull Testers 

2244 A Wentwoth Labs. 

'AWP280X' Microprocessor 

Controlled Semiconductor 

Wafer Probe Station with 

Controller, Watec 'WAT- 

202B' Camera & Zoom Lens, 

JVC Monitor, Polytec Light 

Source and Three Magnetic 

Probe Holders 

2245 An Assymtec Transfer Station 


2249 A Asyss 'TRM02' Wafer 

transfer Conveyor 


2251 Six Mountford Wafer Transfer 

Trucks And Two Stainless 

Steel Shelved Wafer Trolleys 

2252 An HEA 'HE240' Hydrogen 

Purifier Unit 

2253 An ENI Power Systems 

'EGR9600B' Power Generator 

with 'D/W25KVA' Transformer 


2255 A Slee 'S V 10' Nitrogen Bake 

Out System S/n 25560/OV171 

2256 A Cilmatic Systems 'BT22LM' 

Climatic Chamber -5 + 75 ºC. 

S/n CS553 

2257 A Beko 'KTS R00000' Oil / 

Water Separator 

2258 A Sanyo 'M.D.F - U50V' 

Ultralow Temperature 

Freezer (-86 ºC.) 

2259 A Sanyo 'MIR253' Cooled 

Incubator (-10 to +35 ºC) S/n 

0040392

2260 A Votsch 'VT 4004' 

Environmental Test 

Chamber S/n 

58566019280010 

2261 Votsch 'VT 7004' 


Chamber 

2262 An Advanced Climatic Eng. 

Bench Top Oven 

2263 A Sanyo Gallenkamp 'OMT 

075.XX2.C' 40 - 250 º. Hobox 

Oven 


2265 An Instron SFL 'RHS 1533A' 

Furnace with A Betta Tech 

'CV700' Chiller S/n 000100 

2266 An Instron SFL 'RHS 1533A' 

Furnace with A Julabo 'FC 250' 

Chiller 

2267 A Gallenkamp Hot Box Size 

Two Oven 

2268 A Hedinair 500 x 450 x 450mm 

High Oven 

2269 A Montford 'Mini-Cal-M-D' CO2 

Oven S/n 40151 

2270 An Esec '6007' Curing Oven 

with Touch Panel Control S/n 

020147 (2000) 

2271 A Pyramid 'WT 104/G' 

Nitrogen Curing System S/n 

3682 

2272 A Sharetree Mobile 16 Position 

Burn-in System with Push 

Button Temperature Control 

and Digital Display 

2273 An SSEC '10/50 Evergreen' 

Mask Cleaner 

2274 A Planer 'SF220' Surface 

Profiler 

2275 A Photo Kinetics '2210' Laser 

Beam Analyser 

2276 A Chemical Stripping System 

with Controller 

2277 An Esec 'CT 2000' Cartesian 

Placement Machine (No VME 

Rack) Wafer Die Eject Feeder 

2278 Thirteen Various Envirco Fan 

Filter Units 

2279 A Mactronix 'UK/25/A3' Eureka 

Junior Wafer Transfer Station 


2282 An S.E. IT Electronics Minimax 

Solid State Soldering Machine 

with Motor Assisted Cooling 

Unit 

2283 A Perkins Elmer 'DMA 7E' 

Dynamic Mechanical Analyser 

with Intercooler2 and TAC DX 

Thermal Analyser Control 

2284 A Sikama 'Falcon 5 x 5' Four 

Section Variable Temperature / 

Speed Through Feed Oven 

2285 A Herforth '40/100E' Press with 

'USG 640' Controller 

2286 Four Clariant 5 Ltr. Pressure 

Pots 

2287 A 1000 x 70mm Chrome 

Cleanroom Table and an 

Operators Workstation 

2288 Two Memmert and one 

Gallenkamp Hotbox Ovens 

2289 A Flowcool Systems '6500S' 

Mobile Air Chiller Unit 

2290 A Surf Systems 'SS1000' Auto 

Screen Wash 

2291 An SM Tech '100S' Thick Film 

Printer with Upgraded Camera 

Alignment 

2292 A Flow Autoclave Systems Iso 

Static Press 

2293 An Edwards 'Auto 306' 

Evaporator / Vacuum Coater 

fitted with 'FL400' Specimen 

Chamber 

2294 A Unichem 'MP-4150' Ceramic 

Green Sheet Punching 

Machine with Computer 

2295 A Lamarflo 2500 x 950 x 

1850mm Wetbench with 3 

Bays, 2 Taps, Process Timer, 

Lighting & Power Points 

2296 A Lamarflo 2500 x 950 x 


Bays, Stainless Steel Sink, 

Process Timer, Lighting & 

Power Points

2297 A Lamarflo 'S5000' 2000 x 900 

x 2300mm Laminar Flow 

Wetbench with 2 Bays, Sink, 2 

Taps, Process Timer, Lighting 

& Power Points 


2300 A Lamarflo 2500 x 950 x 


Bays, one Sink, 2 Taps, 

Process Timer, Lighting & 

Power Points 

BUILDING 103A 

RELIABILITY LAB. 

2301 A Votsch 'VT 7012 S 2' 

Environmental Chamber 

Temp. Range -80 to +220 ºC. 

2302 A Hirayama 'Hastest PC 422 

R 7' Steam Pressure 


Chamber S/n 000275671 

(2000) 

2303 A Sanyo Gallenkamp 'HGC 

065-PF4/J' Environmental 

Test Chamber S/n 8900 

2304 A Sharetree 'TC600' 



2305 A Sharetree Cyclone 

'THC/250/640' Cryogenic 



2306 A Sharetree Cyclone 

'THC/250/640' Environmental 

Test Chamber S/n 64502 

2307 A Mountford 'TS 500/LN2' 



2308 A Mountford 'Mini/Cal/B' 


Chamber S/n 4858/K6808 

2309 A Sanyo Gallenkamp 'OMT- 

075-XX5-C' Benchtop Oven 

S/n 99/12/084 

2310 A Brumby '3 SL 3000' Bake In 

Oven S/n 232 (1997) 

2311 A Votsch 'VT 4100' 

Environmental Chamber 

Temp. Range -40 to +180 ºC. 

S/n 60887466 (1997) 

2312 Two Brumby 19 inch Test 

Equipment Racks 

2313 Two 19 inch Test Equipment 

Racks 


2316 A Gearings & Watson 

Electronics Ltd 'DS 1/K' 

Vibration Test system with 

Controller, Amplifier and 

Cooling Fan 

2317 A Montford 'LCO/18V' 

Environmental Test Chamber 

S/n 4904/K6849 

2318 - 2319 Blank Lot 

2320 Two Optima 19 inch Test 



2323 Four Optima 19 inch Test 



2325 Three Optima 19 inch Test 


2326 Five Optima 19 inch Test 


2327 Six Optima 19 inch Test 



END OF ROSTRUM 2 

END OF SALE

PURCHASERS BUYING ORDER 

For the convenience of Buyers who may wish to make purchases, but who do not wish to attend 

the sale, the Auctioneer will arrange to bid on their behalf if the orders are sent in on the subjoined 

form. A prior inspection on the specified View Days is, however, advised. 

The Auctioneers shall not be liable for any neglect, default or failure in executing bids nor any 

liability arising thereto. 

Date ......................................... 

To: Henry Butcher 

Brownlow House 

50/51 High Holborn 

London WC1V 6EG 

Tel: +44 (0) 20 7405 8411 

Fax: +44 (0) 20 7916 5442 

e-mail: sales@henrybutcher.com 

Please bid on our behalf at the below-named sale for any undermentioned lots, at or under the limit 

marked against them. 

We enclose a cheque for £ ............... being 25% of the estimated amounts of the purchase money, 

and in event of you buying any lots for us we undertake to pay for, and remove, the goods in 

conformity with the Conditions of Sale and Notice to Purchasers. 

Location Town of Sale 

Abingdon, Oxon 

Date of Sale 

18 th March 2004 

Lot Description Limit of Price 

This order is given on the understanding that a 12½% Buyer's Premium plus Value Added Tax will 

be levied on the "Hammer Price" and will be charged over and above the limit placed by you on 

this order. 

Name ................................................................................. 

Address ................................................................................. 

................................................................................. 

Telephone ........................................ Signature ............................................... 

Fax ……………………………… E-mail: ……………………………......…… 

A MINIMUM BID OF £25.00 PER LOT WILL ONLY BE ACCEPTED ON THE ABOVE FORM

NOTES 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________

Goodyear GB Limited (TENDER) Offers by 12 March 

Wolverhampton 

Rubber Processing Equipment 

SD Europe Limited (ONLINE) Ends 16 March 2004 

Ellesmere Port 

High Quality Compaq Servers with 3-Month Warranty 

Bookham Technology Plc (LIVE & WEBCAST) 18 March 2004 

Abingdon 

Entire Contents of 6" Silicon Wafer Fabrication Tools, Assembly, QA, and Test Equipment 

Cannon Engineering (LIVE & WEBCAST) 23rd March 2004 

Mansfield 

High Quality CNC Machine Tools 

The Davy Roll Company Limited (LIVE & WEBCAST) 25 March 2004 

Crewe, Cheshire 

Heavy Capacity CNC Roll Turning Lathes, Roll Grinders, Deep Hole Boring and Drilling Machines, 

Foundry Plant and Equipment 

Highfield Timber Products Ltd (LIVE & WEBCAST) 15 April 2004 

Maldon, Essex 

Excellent Content and Quality Woodworking Machinery and General Factory Equipment

AUCTION CATALOGUE

Create successful ePaper yourself

Delete template?

Save as template?