Honda Lawn Mower Owner's Manual Service Record Booklet

More documents

Recommendations

Info

5. PRE-OPERATION CHECKS - continued Air Cleaner Inspection Ensure the air filters are clean and in good condition. A dirty air filter will restrict air flow to the carburettor, reducing engine performance. Refer to page 47 for air cleaner service. Ensure Snorkel hose is attached and in good condition ( GXV160 Engine only – Refer Page 60 ) Grass Bag A lawn mower works like a vacuum cleaner; it blows air through the bag, which traps the grass clippings. Always empty the grass bag before it becomes filled to the limit of its capacity. Bagging performance will diminish after the bag becomes about 90% filled. Also the bag is easier to empty when not packed full. Inspection Inspect the grass bag before use. Check for holes, tears and excessive wear. The grass bag will wear during normal use and will eventually require replacement (See page 56). NOTE: Under heavy mowing / grass catching conditions the grass bag weave may become clogged with dust and dirt. This will affect the bagging performance of the catcher bag. To ensure optimum bagging performance, a dirty grass bag may be washed with water and air dried as necessary. 21
5. PRE-OPERATION CHECKS - continued Installation 1. Raise the discharge guard and hook the grass bag frame onto the cutter housing as shown. 2. Release the discharge guard to secure the grass bag in place. NOTE: GRASS BAG DESIGN MAY VARY DEPENDENT ON MODEL, BUT ATTACHMENT PROCEDURE REMAINS THE SAME FOR ALL MODELS. Removal 1. Raise the discharge guard, grasp the grass bag handle and remove the grass bag. 2. Release the discharge guard. 3. When the grass bag is clear of the discharge guard, you can lift the grass bag through the handlebars, or remove it from the rear of the mower below the handlebar. 22
Page 1 and 2: Honda Lawn Mower Owner’s Manual &
Page 3 and 4: CONTENTS 1. WARRANTY...............
Page 5 and 6: 1. HONDA limited WARRANTY Honda* wa
Page 7 and 8: 2. SAFETY INSTRUCTIONS - continued
Page 9 and 10: ( 21” Models only ) 3. COMPONENT
Page 11 and 12: 4. CONTROLS - continued Blade Contr
Page 13 and 14: 4. CONTROLS - continued Cutting Hei
Page 15 and 16: 4. CONTROLS - continued Front Guard
Page 17 and 18: 5. PRE-OPERATION CHECKS - continued
Page 19 and 20: 5. PRE-OPERATION CHECKS - continued
Page 21: 5. PRE-OPERATION CHECKS - continued
Page 25 and 26: 6. OPERATION MOWING PRECAUTIONS Bef
Page 27 and 28: 6. OPERATION - continued 3. Pull th
Page 29 and 30: 6. OPERATION - continued Drive Clut
Page 31 and 32: 6. OPERATION - continued STOPPING T
Page 33 and 34: 6. OPERATION - continued Obstacles
Page 35 and 36: 6. OPERATION - continued Blade Shar
Page 37 and 38: 7. TRANSPORTING/STORAGE BEFORE LOAD
Page 39 and 40: 7. TRANSPORTING/STORAGE - continued
Page 41 and 42: 7. TRANSPORTING/STORAGE - continued
Page 43 and 44: 8. MAINTENANCE THE IMPORTANCE OF MA
Page 45 and 46: 8. MAINTENANCE - continued MAINTENA
Page 47 and 48: 8. MAINTENANCE - continued 5. After
Page 49 and 50: 8. MAINTENANCE - continued Foam ele
Page 51 and 52: 8. MAINTENANCE - continued Carburet
Page 53 and 54: 8. MAINTENANCE - continued Illustra
Page 55 and 56: 8. MAINTENANCE - continued 4. Insta
Page 57 and 58: 8. MAINTENANCE - continued GRASS BA
Page 59 and 60: 9. TROUBLESHOOTING - continued VIBR
Page 61 and 62: 10. SPECIFICATIONS - continued Mode
Page 63 and 64: 10. SPECIFICATIONS - continued DRIV
Page 65 and 66: 11. SET-UP INSTRUCTIONS - continued
Page 67: Part Number: GS001-2010 66

Honda Lawn Mower Owner's Manual Service Record Booklet

Create successful ePaper yourself

Delete template?

Save as template?