Honda Lawn Mower Owner's Manual Service Record Booklet

More documents

Recommendations

Info

6. OPERATION - continued OPERATING THE CONTROLS FOR MOWING Throttle Lever For best cut quality, always mow with the throttle lever in the HIGH position. When the blades rotate at the preset fast speed, it creates a strong fan action that lifts and cuts grass more efficiently. Do not try to increase the preset engine speed, the blades could fracture and come apart and engine life will be shortened. When you need to leave the mower for any reason, always turn the engine OFF by moving the throttle lever to the STOP position or by releasing the Blade Control Lever if your model is fitted with Fly Wheel Brake. Blade Control Lever ( HRU196M1 and all 21” Models ) To prevent stalling, always put the throttle lever in the fast position before engaging the blade control lever. To start blade rotation, press the button on top of the blade control lever, then push the lever forward quickly and hold it against the handlebar. All other models – There is no Button to press, simply engage the lever. Release the blade control lever to stop the blades. NOTE: On Models equipped with Fly Wheel Brake, the Engine will stop when you release the lever. Operate the blade control lever with a quick and complete motion, so the blade control is always either fully engaged or stopped. This will help to prevent stalling the engine, and will also extend the service life of the blade control mechanism. 27
6. OPERATION - continued Drive Clutch Lever ( 21” Models only ) Push the drive clutch lever forward and hold it against the handlebar to propel the mower forward. Release the drive clutch lever to stop the mower’s forward movement. Always release the drive clutch lever before starting the engine. If the drive clutch is engaged, the mower will move forward when you operate the starter. Operate the drive clutch lever with a quick and complete motion, so the drive clutch is either fully engaged or released. Hold the drive clutch lever against the handlebar during self-propelled mowing. This will help to extend the service life of the clutch mechanism. NOTE: Do not engage the Clutch Lever when the mower is moving backwards. 28
Page 1 and 2: Honda Lawn Mower Owner’s Manual &
Page 3 and 4: CONTENTS 1. WARRANTY...............
Page 5 and 6: 1. HONDA limited WARRANTY Honda* wa
Page 7 and 8: 2. SAFETY INSTRUCTIONS - continued
Page 9 and 10: ( 21” Models only ) 3. COMPONENT
Page 11 and 12: 4. CONTROLS - continued Blade Contr
Page 13 and 14: 4. CONTROLS - continued Cutting Hei
Page 15 and 16: 4. CONTROLS - continued Front Guard
Page 17 and 18: 5. PRE-OPERATION CHECKS - continued
Page 25 and 26: 6. OPERATION MOWING PRECAUTIONS Bef
Page 27: 6. OPERATION - continued 3. Pull th
Page 31 and 32: 6. OPERATION - continued STOPPING T
Page 33 and 34: 6. OPERATION - continued Obstacles
Page 35 and 36: 6. OPERATION - continued Blade Shar
Page 37 and 38: 7. TRANSPORTING/STORAGE BEFORE LOAD
Page 39 and 40: 7. TRANSPORTING/STORAGE - continued
Page 41 and 42: 7. TRANSPORTING/STORAGE - continued
Page 43 and 44: 8. MAINTENANCE THE IMPORTANCE OF MA
Page 45 and 46: 8. MAINTENANCE - continued MAINTENA
Page 47 and 48: 8. MAINTENANCE - continued 5. After
Page 49 and 50: 8. MAINTENANCE - continued Foam ele
Page 51 and 52: 8. MAINTENANCE - continued Carburet
Page 53 and 54: 8. MAINTENANCE - continued Illustra
Page 55 and 56: 8. MAINTENANCE - continued 4. Insta
Page 57 and 58: 8. MAINTENANCE - continued GRASS BA
Page 59 and 60: 9. TROUBLESHOOTING - continued VIBR
Page 61 and 62: 10. SPECIFICATIONS - continued Mode
Page 63 and 64: 10. SPECIFICATIONS - continued DRIV
Page 65 and 66: 11. SET-UP INSTRUCTIONS - continued
Page 67: Part Number: GS001-2010 66

Honda Lawn Mower Owner's Manual Service Record Booklet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?